DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH v3 0/4] add lookaside IPsec UDP encapsulation and transport mode
@ 2021-04-08  8:17 Tejasree Kondoj
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 1/4] crypto/octeontx2: add UDP encapsulation support Tejasree Kondoj
                   ` (3 more replies)
  0 siblings, 4 replies; 11+ messages in thread
From: Tejasree Kondoj @ 2021-04-08  8:17 UTC (permalink / raw)
  To: Akhil Goyal, Radu Nicolau
  Cc: Tejasree Kondoj, Anoob Joseph, Ankur Dwivedi, Jerin Jacob, dev

This series adds lookaside IPsec UDP encapsulation and
transport mode support.
The functionality has been tested with ipsec-secgw application
running in lookaside protocol offload mode.

v3:
* Supported UDP encapsulation for IPv6 packets
* Fixed if condition

v2:
* Supported per SA UDP encapsulation in ipsec-secgw
* Added new packet type for UDP-ESP packets in mbuf

Tejasree Kondoj (4):
  crypto/octeontx2: add UDP encapsulation support
  mbuf: add packet type for UDP-ESP tunnel packets
  examples/ipsec-secgw: add UDP encapsulation support
  crypto/octeontx2: support lookaside IPv4 transport mode

 doc/guides/cryptodevs/octeontx2.rst           |   2 +
 doc/guides/rel_notes/release_21_05.rst        |  14 ++
 doc/guides/sample_app_ug/ipsec_secgw.rst      |  15 +-
 drivers/crypto/octeontx2/otx2_cryptodev_ops.c |   7 +-
 drivers/crypto/octeontx2/otx2_cryptodev_sec.c | 145 +++++++++---------
 drivers/crypto/octeontx2/otx2_cryptodev_sec.h |   4 +-
 drivers/crypto/octeontx2/otx2_ipsec_po.h      |   6 +
 drivers/crypto/octeontx2/otx2_ipsec_po_ops.h  |   8 +-
 examples/ipsec-secgw/ipsec-secgw.c            |  49 +++++-
 examples/ipsec-secgw/ipsec-secgw.h            |   2 +
 examples/ipsec-secgw/ipsec.c                  |   9 ++
 examples/ipsec-secgw/ipsec.h                  |   2 +
 examples/ipsec-secgw/sa.c                     |  18 +++
 examples/ipsec-secgw/sad.h                    |   6 +-
 lib/librte_mbuf/rte_mbuf_ptype.h              |  21 +++
 15 files changed, 218 insertions(+), 90 deletions(-)

-- 
2.27.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [dpdk-dev] [PATCH v3 1/4] crypto/octeontx2: add UDP encapsulation support
  2021-04-08  8:17 [dpdk-dev] [PATCH v3 0/4] add lookaside IPsec UDP encapsulation and transport mode Tejasree Kondoj
@ 2021-04-08  8:17 ` Tejasree Kondoj
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets Tejasree Kondoj
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 11+ messages in thread
From: Tejasree Kondoj @ 2021-04-08  8:17 UTC (permalink / raw)
  To: Akhil Goyal, Radu Nicolau
  Cc: Tejasree Kondoj, Anoob Joseph, Ankur Dwivedi, Jerin Jacob, dev

Adding UDP encapsulation support for IPsec in
lookaside protocol mode.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
---
 doc/guides/cryptodevs/octeontx2.rst           |  1 +
 doc/guides/rel_notes/release_21_05.rst        |  2 +
 drivers/crypto/octeontx2/otx2_cryptodev_sec.c | 59 ++++++++-----------
 3 files changed, 28 insertions(+), 34 deletions(-)

diff --git a/doc/guides/cryptodevs/octeontx2.rst b/doc/guides/cryptodevs/octeontx2.rst
index 8c7df065b3..00226a8c77 100644
--- a/doc/guides/cryptodevs/octeontx2.rst
+++ b/doc/guides/cryptodevs/octeontx2.rst
@@ -181,6 +181,7 @@ Features supported
 * Tunnel mode
 * ESN
 * Anti-replay
+* UDP Encapsulation
 * AES-128/192/256-GCM
 * AES-128/192/256-CBC-SHA1-HMAC
 * AES-128/192/256-CBC-SHA256-128-HMAC
diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst
index a80ce8ca12..5565c7637c 100644
--- a/doc/guides/rel_notes/release_21_05.rst
+++ b/doc/guides/rel_notes/release_21_05.rst
@@ -126,6 +126,8 @@ New Features
 * **Updated the OCTEON TX2 crypto PMD.**
 
   * Added support for DIGEST_ENCRYPTED mode in OCTEON TX2 crypto PMD.
+  * Updated the OCTEON TX2 crypto PMD lookaside protocol offload for IPsec with
+    UDP encapsulation support for NAT Traversal.
 
 * **Updated testpmd.**
 
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_sec.c b/drivers/crypto/octeontx2/otx2_cryptodev_sec.c
index 342f089df8..210c53aa0a 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_sec.c
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_sec.c
@@ -203,6 +203,7 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 				     struct rte_security_session *sec_sess)
 {
 	struct rte_crypto_sym_xform *auth_xform, *cipher_xform;
+	struct otx2_ipsec_po_ip_template *template;
 	const uint8_t *cipher_key, *auth_key;
 	struct otx2_sec_session_ipsec_lp *lp;
 	struct otx2_ipsec_po_sa_ctl *ctl;
@@ -248,11 +249,7 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 		if (ipsec->tunnel.type == RTE_SECURITY_IPSEC_TUNNEL_IPV4) {
 
 			if (ctl->enc_type == OTX2_IPSEC_PO_SA_ENC_AES_GCM) {
-				if (ipsec->options.udp_encap) {
-					sa->aes_gcm.template.ip4.udp_src = 4500;
-					sa->aes_gcm.template.ip4.udp_dst = 4500;
-				}
-				ip = &sa->aes_gcm.template.ip4.ipv4_hdr;
+				template = &sa->aes_gcm.template;
 				ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
 						aes_gcm.template) + sizeof(
 						sa->aes_gcm.template.ip4);
@@ -260,11 +257,7 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 				lp->ctx_len = ctx_len >> 3;
 			} else if (ctl->auth_type ==
 					OTX2_IPSEC_PO_SA_AUTH_SHA1) {
-				if (ipsec->options.udp_encap) {
-					sa->sha1.template.ip4.udp_src = 4500;
-					sa->sha1.template.ip4.udp_dst = 4500;
-				}
-				ip = &sa->sha1.template.ip4.ipv4_hdr;
+				template = &sa->sha1.template;
 				ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
 						sha1.template) + sizeof(
 						sa->sha1.template.ip4);
@@ -272,11 +265,7 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 				lp->ctx_len = ctx_len >> 3;
 			} else if (ctl->auth_type ==
 					OTX2_IPSEC_PO_SA_AUTH_SHA2_256) {
-				if (ipsec->options.udp_encap) {
-					sa->sha2.template.ip4.udp_src = 4500;
-					sa->sha2.template.ip4.udp_dst = 4500;
-				}
-				ip = &sa->sha2.template.ip4.ipv4_hdr;
+				template = &sa->sha2.template;
 				ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
 						sha2.template) + sizeof(
 						sa->sha2.template.ip4);
@@ -285,8 +274,15 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 			} else {
 				return -EINVAL;
 			}
+			ip = &template->ip4.ipv4_hdr;
+			if (ipsec->options.udp_encap) {
+				ip->next_proto_id = IPPROTO_UDP;
+				template->ip4.udp_src = rte_be_to_cpu_16(4500);
+				template->ip4.udp_dst = rte_be_to_cpu_16(4500);
+			} else {
+				ip->next_proto_id = IPPROTO_ESP;
+			}
 			ip->version_ihl = RTE_IPV4_VHL_DEF;
-			ip->next_proto_id = IPPROTO_ESP;
 			ip->time_to_live = ipsec->tunnel.ipv4.ttl;
 			ip->type_of_service |= (ipsec->tunnel.ipv4.dscp << 2);
 			if (ipsec->tunnel.ipv4.df)
@@ -299,11 +295,7 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 				RTE_SECURITY_IPSEC_TUNNEL_IPV6) {
 
 			if (ctl->enc_type == OTX2_IPSEC_PO_SA_ENC_AES_GCM) {
-				if (ipsec->options.udp_encap) {
-					sa->aes_gcm.template.ip6.udp_src = 4500;
-					sa->aes_gcm.template.ip6.udp_dst = 4500;
-				}
-				ip6 = &sa->aes_gcm.template.ip6.ipv6_hdr;
+				template = &sa->aes_gcm.template;
 				ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
 						aes_gcm.template) + sizeof(
 						sa->aes_gcm.template.ip6);
@@ -311,11 +303,7 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 				lp->ctx_len = ctx_len >> 3;
 			} else if (ctl->auth_type ==
 					OTX2_IPSEC_PO_SA_AUTH_SHA1) {
-				if (ipsec->options.udp_encap) {
-					sa->sha1.template.ip6.udp_src = 4500;
-					sa->sha1.template.ip6.udp_dst = 4500;
-				}
-				ip6 = &sa->sha1.template.ip6.ipv6_hdr;
+				template = &sa->sha1.template;
 				ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
 						sha1.template) + sizeof(
 						sa->sha1.template.ip6);
@@ -323,11 +311,7 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 				lp->ctx_len = ctx_len >> 3;
 			} else if (ctl->auth_type ==
 					OTX2_IPSEC_PO_SA_AUTH_SHA2_256) {
-				if (ipsec->options.udp_encap) {
-					sa->sha2.template.ip6.udp_src = 4500;
-					sa->sha2.template.ip6.udp_dst = 4500;
-				}
-				ip6 = &sa->sha2.template.ip6.ipv6_hdr;
+				template = &sa->sha2.template;
 				ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
 						sha2.template) + sizeof(
 						sa->sha2.template.ip6);
@@ -337,6 +321,16 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 				return -EINVAL;
 			}
 
+			ip6 = &template->ip6.ipv6_hdr;
+			if (ipsec->options.udp_encap) {
+				ip6->proto = IPPROTO_UDP;
+				template->ip6.udp_src = rte_be_to_cpu_16(4500);
+				template->ip6.udp_dst = rte_be_to_cpu_16(4500);
+			} else {
+				ip6->proto = (ipsec->proto ==
+					RTE_SECURITY_IPSEC_SA_PROTO_ESP) ?
+					IPPROTO_ESP : IPPROTO_AH;
+			}
 			ip6->vtc_flow = rte_cpu_to_be_32(0x60000000 |
 				((ipsec->tunnel.ipv6.dscp <<
 					RTE_IPV6_HDR_TC_SHIFT) &
@@ -345,9 +339,6 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 					RTE_IPV6_HDR_FL_SHIFT) &
 					RTE_IPV6_HDR_FL_MASK));
 			ip6->hop_limits = ipsec->tunnel.ipv6.hlimit;
-			ip6->proto = (ipsec->proto ==
-					RTE_SECURITY_IPSEC_SA_PROTO_ESP) ?
-					IPPROTO_ESP : IPPROTO_AH;
 			memcpy(&ip6->src_addr, &ipsec->tunnel.ipv6.src_addr,
 				sizeof(struct in6_addr));
 			memcpy(&ip6->dst_addr, &ipsec->tunnel.ipv6.dst_addr,
-- 
2.27.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [dpdk-dev] [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets
  2021-04-08  8:17 [dpdk-dev] [PATCH v3 0/4] add lookaside IPsec UDP encapsulation and transport mode Tejasree Kondoj
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 1/4] crypto/octeontx2: add UDP encapsulation support Tejasree Kondoj
@ 2021-04-08  8:17 ` Tejasree Kondoj
  2021-04-08  8:33   ` Tejasree Kondoj
  2021-04-08 11:10   ` Olivier Matz
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 3/4] examples/ipsec-secgw: add UDP encapsulation support Tejasree Kondoj
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 4/4] crypto/octeontx2: support lookaside IPv4 transport mode Tejasree Kondoj
  3 siblings, 2 replies; 11+ messages in thread
From: Tejasree Kondoj @ 2021-04-08  8:17 UTC (permalink / raw)
  To: Akhil Goyal, Radu Nicolau, Konstantin Ananyev
  Cc: Tejasree Kondoj, Anoob Joseph, Ankur Dwivedi, Jerin Jacob, dev

Adding new mbuf packet type for UDP encapsulated
ESP packets.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
---
 doc/guides/rel_notes/release_21_05.rst |  5 +++++
 lib/librte_mbuf/rte_mbuf_ptype.h       | 21 +++++++++++++++++++++
 2 files changed, 26 insertions(+)

diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst
index 5565c7637c..c9e9e2ec22 100644
--- a/doc/guides/rel_notes/release_21_05.rst
+++ b/doc/guides/rel_notes/release_21_05.rst
@@ -55,6 +55,11 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Added new packet type for UDP-ESP packets in mbuf.**
+
+  Added new packet type ``RTE_PTYPE_TUNNEL_ESP_IN_UDP`` which can be
+  used to identify UDP encapsulated ESP packets.
+
 * **Enhanced ethdev representor syntax.**
 
   * Introduced representor type of VF, SF and PF.
diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h b/lib/librte_mbuf/rte_mbuf_ptype.h
index 17a2dd3576..bf92ce0c1a 100644
--- a/lib/librte_mbuf/rte_mbuf_ptype.h
+++ b/lib/librte_mbuf/rte_mbuf_ptype.h
@@ -491,6 +491,27 @@ extern "C" {
  * | 'destination port'=6635>
  */
 #define RTE_PTYPE_TUNNEL_MPLS_IN_UDP      0x0000d000
+/**
+ * ESP-in-UDP tunneling packet type (RFC 3948).
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'destination port'=4500>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'destination port'=4500>
+ * or,
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=17
+ * | 'source port'=4500>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=17
+ * | 'source port'=4500>
+ */
+#define RTE_PTYPE_TUNNEL_ESP_IN_UDP       0x0000e000
 /**
  * Mask of tunneling packet types.
  */
-- 
2.27.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [dpdk-dev] [PATCH v3 3/4] examples/ipsec-secgw: add UDP encapsulation support
  2021-04-08  8:17 [dpdk-dev] [PATCH v3 0/4] add lookaside IPsec UDP encapsulation and transport mode Tejasree Kondoj
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 1/4] crypto/octeontx2: add UDP encapsulation support Tejasree Kondoj
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets Tejasree Kondoj
@ 2021-04-08  8:17 ` Tejasree Kondoj
  2021-04-08 10:45   ` Ananyev, Konstantin
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 4/4] crypto/octeontx2: support lookaside IPv4 transport mode Tejasree Kondoj
  3 siblings, 1 reply; 11+ messages in thread
From: Tejasree Kondoj @ 2021-04-08  8:17 UTC (permalink / raw)
  To: Akhil Goyal, Radu Nicolau, Konstantin Ananyev
  Cc: Tejasree Kondoj, Anoob Joseph, Ankur Dwivedi, Jerin Jacob, dev

Adding lookaside IPsec UDP encapsulation support
for NAT traversal.
Application has to add udp-encap option to sa config file
to enable UDP encapsulation on the SA.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
---
 doc/guides/rel_notes/release_21_05.rst   |  5 +++
 doc/guides/sample_app_ug/ipsec_secgw.rst | 15 +++++++-
 examples/ipsec-secgw/ipsec-secgw.c       | 49 +++++++++++++++++++++---
 examples/ipsec-secgw/ipsec-secgw.h       |  2 +
 examples/ipsec-secgw/ipsec.c             |  9 +++++
 examples/ipsec-secgw/ipsec.h             |  2 +
 examples/ipsec-secgw/sa.c                | 18 +++++++++
 examples/ipsec-secgw/sad.h               |  6 ++-
 8 files changed, 98 insertions(+), 8 deletions(-)

diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst
index c9e9e2ec22..d71422c452 100644
--- a/doc/guides/rel_notes/release_21_05.rst
+++ b/doc/guides/rel_notes/release_21_05.rst
@@ -141,6 +141,11 @@ New Features
   * Added command to display Rx queue used descriptor count.
     ``show port (port_id) rxq (queue_id) desc used count``
 
+* **Updated ipsec-secgw sample application.**
+
+  * Updated the ``ipsec-secgw`` sample application with UDP encapsulation
+    support for NAT Traversal.
+
 
 Removed Items
 -------------
diff --git a/doc/guides/sample_app_ug/ipsec_secgw.rst b/doc/guides/sample_app_ug/ipsec_secgw.rst
index 176e292d3f..2dc39aa50a 100644
--- a/doc/guides/sample_app_ug/ipsec_secgw.rst
+++ b/doc/guides/sample_app_ug/ipsec_secgw.rst
@@ -500,7 +500,7 @@ The SA rule syntax is shown as follows:
 
     sa <dir> <spi> <cipher_algo> <cipher_key> <auth_algo> <auth_key>
     <mode> <src_ip> <dst_ip> <action_type> <port_id> <fallback>
-    <flow-direction> <port_id> <queue_id>
+    <flow-direction> <port_id> <queue_id> <udp-encap>
 
 where each options means:
 
@@ -709,6 +709,17 @@ where each options means:
    * *port_id*: Port ID of the NIC for which the SA is configured.
    * *queue_id*: Queue ID to which traffic should be redirected.
 
+ ``<udp-encap>``
+
+ * Option to enable IPsec UDP encapsulation for NAT Traversal.
+   Only *lookaside-protocol-offload* mode is supported at the moment.
+
+ * Optional: Yes, it is disabled by default
+
+ * Syntax:
+
+   * *udp-encap*
+
 Example SA rules:
 
 .. code-block:: console
@@ -1023,4 +1034,4 @@ Available options:
 *   ``-h`` Show usage.
 
 If <ipsec_mode> is specified, only tests for that mode will be invoked. For the
-list of available modes please refer to run_test.sh.
\ No newline at end of file
+list of available modes please refer to run_test.sh.
diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index 20d69ba813..0555d6d00f 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -184,7 +184,8 @@ static uint64_t frag_ttl_ns = MAX_FRAG_TTL_NS;
 /* application wide librte_ipsec/SA parameters */
 struct app_sa_prm app_sa_prm = {
 			.enable = 0,
-			.cache_sz = SA_CACHE_SZ
+			.cache_sz = SA_CACHE_SZ,
+			.udp_encap = 0
 		};
 static const char *cfgfile;
 
@@ -360,6 +361,9 @@ prepare_one_packet(struct rte_mbuf *pkt, struct ipsec_traffic *t)
 	const struct rte_ether_hdr *eth;
 	const struct rte_ipv4_hdr *iph4;
 	const struct rte_ipv6_hdr *iph6;
+	const struct rte_udp_hdr *udp;
+	uint16_t ip4_hdr_len;
+	uint16_t nat_port;
 
 	eth = rte_pktmbuf_mtod(pkt, const struct rte_ether_hdr *);
 	if (eth->ether_type == rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV4)) {
@@ -368,9 +372,28 @@ prepare_one_packet(struct rte_mbuf *pkt, struct ipsec_traffic *t)
 			RTE_ETHER_HDR_LEN);
 		adjust_ipv4_pktlen(pkt, iph4, 0);
 
-		if (iph4->next_proto_id == IPPROTO_ESP)
+		switch (iph4->next_proto_id) {
+		case IPPROTO_ESP:
 			t->ipsec.pkts[(t->ipsec.num)++] = pkt;
-		else {
+			break;
+		case IPPROTO_UDP:
+			if (app_sa_prm.udp_encap == 1) {
+				ip4_hdr_len = ((iph4->version_ihl &
+					RTE_IPV4_HDR_IHL_MASK) *
+					RTE_IPV4_IHL_MULTIPLIER);
+				udp = rte_pktmbuf_mtod_offset(pkt,
+					struct rte_udp_hdr *, ip4_hdr_len);
+				nat_port = rte_cpu_to_be_16(IPSEC_NAT_T_PORT);
+				if (udp->src_port == nat_port ||
+					udp->dst_port == nat_port){
+					t->ipsec.pkts[(t->ipsec.num)++] = pkt;
+					pkt->packet_type |=
+						RTE_PTYPE_TUNNEL_ESP_IN_UDP;
+					break;
+				}
+			}
+		/* Fall through */
+		default:
 			t->ip4.data[t->ip4.num] = &iph4->next_proto_id;
 			t->ip4.pkts[(t->ip4.num)++] = pkt;
 		}
@@ -403,9 +426,25 @@ prepare_one_packet(struct rte_mbuf *pkt, struct ipsec_traffic *t)
 			return;
 		}
 
-		if (next_proto == IPPROTO_ESP)
+		switch (iph6->proto) {
+		case IPPROTO_ESP:
 			t->ipsec.pkts[(t->ipsec.num)++] = pkt;
-		else {
+			break;
+		case IPPROTO_UDP:
+			if (app_sa_prm.udp_encap == 1) {
+				udp = rte_pktmbuf_mtod_offset(pkt,
+					struct rte_udp_hdr *, l3len);
+				nat_port = rte_cpu_to_be_16(IPSEC_NAT_T_PORT);
+				if (udp->src_port == nat_port ||
+					udp->dst_port == nat_port){
+					t->ipsec.pkts[(t->ipsec.num)++] = pkt;
+					pkt->packet_type |=
+						RTE_PTYPE_TUNNEL_ESP_IN_UDP;
+					break;
+				}
+			}
+		/* Fall through */
+		default:
 			t->ip6.data[t->ip6.num] = &iph6->proto;
 			t->ip6.pkts[(t->ip6.num)++] = pkt;
 		}
diff --git a/examples/ipsec-secgw/ipsec-secgw.h b/examples/ipsec-secgw/ipsec-secgw.h
index f2281e73cf..6887d752ab 100644
--- a/examples/ipsec-secgw/ipsec-secgw.h
+++ b/examples/ipsec-secgw/ipsec-secgw.h
@@ -47,6 +47,8 @@
 
 #define ETHADDR(a, b, c, d, e, f) (__BYTES_TO_UINT64(a, b, c, d, e, f, 0, 0))
 
+#define IPSEC_NAT_T_PORT 4500
+
 struct traffic_type {
 	const uint8_t *data[MAX_PKT_BURST * 2];
 	struct rte_mbuf *pkts[MAX_PKT_BURST * 2];
diff --git a/examples/ipsec-secgw/ipsec.c b/examples/ipsec-secgw/ipsec.c
index 6baeeb342f..2d35536f57 100644
--- a/examples/ipsec-secgw/ipsec.c
+++ b/examples/ipsec-secgw/ipsec.c
@@ -52,6 +52,7 @@ set_ipsec_conf(struct ipsec_sa *sa, struct rte_security_ipsec_xform *ipsec)
 	ipsec->esn_soft_limit = IPSEC_OFFLOAD_ESN_SOFTLIMIT;
 	ipsec->replay_win_sz = app_sa_prm.window_size;
 	ipsec->options.esn = app_sa_prm.enable_esn;
+	ipsec->options.udp_encap = sa->udp_encap;
 }
 
 int
@@ -556,6 +557,14 @@ ipsec_enqueue(ipsec_xform_fn xform_func, struct ipsec_ctx *ipsec_ctx,
 				continue;
 			}
 
+			if (unlikely((pkts[i]->packet_type &
+					RTE_PTYPE_TUNNEL_ESP_IN_UDP) ==
+					RTE_PTYPE_TUNNEL_ESP_IN_UDP &&
+					sa->udp_encap != 1)) {
+				free_pkts(&pkts[i], 1);
+				continue;
+			}
+
 			sym_cop = get_sym_cop(&priv->cop);
 			sym_cop->m_src = pkts[i];
 
diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h
index 7031e28c46..ae5058de27 100644
--- a/examples/ipsec-secgw/ipsec.h
+++ b/examples/ipsec-secgw/ipsec.h
@@ -75,6 +75,7 @@ struct app_sa_prm {
 	uint32_t window_size; /* replay window size */
 	uint32_t enable_esn;  /* enable/disable ESN support */
 	uint32_t cache_sz;	/* per lcore SA cache size */
+	uint32_t udp_encap;   /* enable/disable UDP Encapsulation */
 	uint64_t flags;       /* rte_ipsec_sa_prm.flags */
 };
 
@@ -136,6 +137,7 @@ struct ipsec_sa {
 		struct rte_security_ipsec_xform *sec_xform;
 	};
 	enum rte_security_ipsec_sa_direction direction;
+	uint8_t udp_encap;
 	uint16_t portid;
 	uint8_t fdir_qid;
 	uint8_t fdir_flag;
diff --git a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c
index cd1397531a..7bb9ef36c2 100644
--- a/examples/ipsec-secgw/sa.c
+++ b/examples/ipsec-secgw/sa.c
@@ -298,6 +298,7 @@ parse_sa_tokens(char **tokens, uint32_t n_tokens,
 	uint32_t portid_p = 0;
 	uint32_t fallback_p = 0;
 	int16_t status_p = 0;
+	uint16_t udp_encap_p = 0;
 
 	if (strcmp(tokens[0], "in") == 0) {
 		ri = &nb_sa_in;
@@ -757,6 +758,23 @@ parse_sa_tokens(char **tokens, uint32_t n_tokens,
 			}
 			continue;
 		}
+		if (strcmp(tokens[ti], "udp-encap") == 0) {
+			APP_CHECK(ips->type ==
+				RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL,
+				status, "UDP encapsulation is allowed if the "
+				"session is of type lookaside-protocol-offload "
+				"only.");
+			if (status->status < 0)
+				return;
+			APP_CHECK_PRESENCE(udp_encap_p, tokens[ti], status);
+			if (status->status < 0)
+				return;
+
+			rule->udp_encap = 1;
+			app_sa_prm.udp_encap = 1;
+			udp_encap_p = 1;
+			continue;
+		}
 
 		/* unrecognizeable input */
 		APP_CHECK(0, status, "unrecognized input \"%s\"",
diff --git a/examples/ipsec-secgw/sad.h b/examples/ipsec-secgw/sad.h
index 473aaa938e..751cf7afae 100644
--- a/examples/ipsec-secgw/sad.h
+++ b/examples/ipsec-secgw/sad.h
@@ -77,6 +77,7 @@ sad_lookup(struct ipsec_sad *sad, struct rte_mbuf *pkts[],
 	uint32_t spi, cache_idx;
 	struct ipsec_sad_cache *cache;
 	struct ipsec_sa *cached_sa;
+	uint16_t udp_hdr_len = 0;
 	int is_ipv4;
 
 	cache  = &RTE_PER_LCORE(sad_cache);
@@ -85,8 +86,11 @@ sad_lookup(struct ipsec_sad *sad, struct rte_mbuf *pkts[],
 	for (i = 0; i < nb_pkts; i++) {
 		ipv4 = rte_pktmbuf_mtod(pkts[i], struct rte_ipv4_hdr *);
 		ipv6 = rte_pktmbuf_mtod(pkts[i], struct rte_ipv6_hdr *);
+		if ((pkts[i]->packet_type & RTE_PTYPE_TUNNEL_ESP_IN_UDP) ==
+				RTE_PTYPE_TUNNEL_ESP_IN_UDP)
+			udp_hdr_len = sizeof(struct rte_udp_hdr);
 		esp = rte_pktmbuf_mtod_offset(pkts[i], struct rte_esp_hdr *,
-				pkts[i]->l3_len);
+				pkts[i]->l3_len + udp_hdr_len);
 
 		is_ipv4 = pkts[i]->packet_type & RTE_PTYPE_L3_IPV4;
 		spi = rte_be_to_cpu_32(esp->spi);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [dpdk-dev] [PATCH v3 4/4] crypto/octeontx2: support lookaside IPv4 transport mode
  2021-04-08  8:17 [dpdk-dev] [PATCH v3 0/4] add lookaside IPsec UDP encapsulation and transport mode Tejasree Kondoj
                   ` (2 preceding siblings ...)
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 3/4] examples/ipsec-secgw: add UDP encapsulation support Tejasree Kondoj
@ 2021-04-08  8:17 ` Tejasree Kondoj
  3 siblings, 0 replies; 11+ messages in thread
From: Tejasree Kondoj @ 2021-04-08  8:17 UTC (permalink / raw)
  To: Akhil Goyal, Radu Nicolau
  Cc: Tejasree Kondoj, Anoob Joseph, Ankur Dwivedi, Jerin Jacob, dev

Adding support for IPv4 lookaside IPsec transport mode.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
---
 doc/guides/cryptodevs/octeontx2.rst           |   1 +
 doc/guides/rel_notes/release_21_05.rst        |   2 +
 drivers/crypto/octeontx2/otx2_cryptodev_ops.c |   7 +-
 drivers/crypto/octeontx2/otx2_cryptodev_sec.c | 110 ++++++++++--------
 drivers/crypto/octeontx2/otx2_cryptodev_sec.h |   4 +-
 drivers/crypto/octeontx2/otx2_ipsec_po.h      |   6 +
 drivers/crypto/octeontx2/otx2_ipsec_po_ops.h  |   8 +-
 7 files changed, 78 insertions(+), 60 deletions(-)

diff --git a/doc/guides/cryptodevs/octeontx2.rst b/doc/guides/cryptodevs/octeontx2.rst
index 00226a8c77..f0beb92a49 100644
--- a/doc/guides/cryptodevs/octeontx2.rst
+++ b/doc/guides/cryptodevs/octeontx2.rst
@@ -179,6 +179,7 @@ Features supported
 * IPv6
 * ESP
 * Tunnel mode
+* Transport mode(IPv4)
 * ESN
 * Anti-replay
 * UDP Encapsulation
diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst
index d71422c452..a0cc3f6cad 100644
--- a/doc/guides/rel_notes/release_21_05.rst
+++ b/doc/guides/rel_notes/release_21_05.rst
@@ -133,6 +133,8 @@ New Features
   * Added support for DIGEST_ENCRYPTED mode in OCTEON TX2 crypto PMD.
   * Updated the OCTEON TX2 crypto PMD lookaside protocol offload for IPsec with
     UDP encapsulation support for NAT Traversal.
+  * Updated the OCTEON TX2 crypto PMD lookaside protocol offload for IPsec with
+    IPv4 transport mode support.
 
 * **Updated testpmd.**
 
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
index fc4d5bac49..31dd0d7f7c 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
@@ -932,7 +932,7 @@ otx2_cpt_sec_post_process(struct rte_crypto_op *cop, uintptr_t *rsp)
 	struct rte_mbuf *m = sym_op->m_src;
 	struct rte_ipv6_hdr *ip6;
 	struct rte_ipv4_hdr *ip;
-	uint16_t m_len;
+	uint16_t m_len = 0;
 	int mdata_len;
 	char *data;
 
@@ -942,11 +942,12 @@ otx2_cpt_sec_post_process(struct rte_crypto_op *cop, uintptr_t *rsp)
 	if (word0->s.opcode.major == OTX2_IPSEC_PO_PROCESS_IPSEC_INB) {
 		data = rte_pktmbuf_mtod(m, char *);
 
-		if (rsp[4] == RTE_SECURITY_IPSEC_TUNNEL_IPV4) {
+		if (rsp[4] == OTX2_IPSEC_PO_TRANSPORT ||
+		    rsp[4] == OTX2_IPSEC_PO_TUNNEL_IPV4) {
 			ip = (struct rte_ipv4_hdr *)(data +
 				OTX2_IPSEC_PO_INB_RPTR_HDR);
 			m_len = rte_be_to_cpu_16(ip->total_length);
-		} else {
+		} else if (rsp[4] == OTX2_IPSEC_PO_TUNNEL_IPV6) {
 			ip6 = (struct rte_ipv6_hdr *)(data +
 				OTX2_IPSEC_PO_INB_RPTR_HDR);
 			m_len = rte_be_to_cpu_16(ip6->payload_len) +
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_sec.c b/drivers/crypto/octeontx2/otx2_cryptodev_sec.c
index 210c53aa0a..3c5686a42c 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_sec.c
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_sec.c
@@ -25,12 +25,15 @@ ipsec_lp_len_precalc(struct rte_security_ipsec_xform *ipsec,
 {
 	struct rte_crypto_sym_xform *cipher_xform, *auth_xform;
 
-	if (ipsec->tunnel.type == RTE_SECURITY_IPSEC_TUNNEL_IPV4)
-		lp->partial_len = sizeof(struct rte_ipv4_hdr);
-	else if (ipsec->tunnel.type == RTE_SECURITY_IPSEC_TUNNEL_IPV6)
-		lp->partial_len = sizeof(struct rte_ipv6_hdr);
-	else
-		return -EINVAL;
+	lp->partial_len = 0;
+	if (ipsec->mode == RTE_SECURITY_IPSEC_SA_MODE_TUNNEL) {
+		if (ipsec->tunnel.type == RTE_SECURITY_IPSEC_TUNNEL_IPV4)
+			lp->partial_len = sizeof(struct rte_ipv4_hdr);
+		else if (ipsec->tunnel.type == RTE_SECURITY_IPSEC_TUNNEL_IPV6)
+			lp->partial_len = sizeof(struct rte_ipv6_hdr);
+		else
+			return -EINVAL;
+	}
 
 	if (ipsec->proto == RTE_SECURITY_IPSEC_SA_PROTO_ESP) {
 		lp->partial_len += sizeof(struct rte_esp_hdr);
@@ -203,7 +206,7 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 				     struct rte_security_session *sec_sess)
 {
 	struct rte_crypto_sym_xform *auth_xform, *cipher_xform;
-	struct otx2_ipsec_po_ip_template *template;
+	struct otx2_ipsec_po_ip_template *template = NULL;
 	const uint8_t *cipher_key, *auth_key;
 	struct otx2_sec_session_ipsec_lp *lp;
 	struct otx2_ipsec_po_sa_ctl *ctl;
@@ -229,10 +232,10 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 	memset(sa, 0, sizeof(struct otx2_ipsec_po_out_sa));
 
 	/* Initialize lookaside ipsec private data */
+	lp->mode_type = OTX2_IPSEC_PO_TRANSPORT;
 	lp->ip_id = 0;
 	lp->seq_lo = 1;
 	lp->seq_hi = 0;
-	lp->tunnel_type = ipsec->tunnel.type;
 
 	ret = ipsec_po_sa_ctl_set(ipsec, crypto_xform, ctl);
 	if (ret)
@@ -242,46 +245,47 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 	if (ret)
 		return ret;
 
-	if (ipsec->mode == RTE_SECURITY_IPSEC_SA_MODE_TUNNEL) {
-		/* Start ip id from 1 */
-		lp->ip_id = 1;
+	/* Start ip id from 1 */
+	lp->ip_id = 1;
+
+	if (ctl->enc_type == OTX2_IPSEC_PO_SA_ENC_AES_GCM) {
+		template = &sa->aes_gcm.template;
+		ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
+				aes_gcm.template) + sizeof(
+				sa->aes_gcm.template.ip4);
+		ctx_len = RTE_ALIGN_CEIL(ctx_len, 8);
+		lp->ctx_len = ctx_len >> 3;
+	} else if (ctl->auth_type ==
+			OTX2_IPSEC_PO_SA_AUTH_SHA1) {
+		template = &sa->sha1.template;
+		ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
+				sha1.template) + sizeof(
+				sa->sha1.template.ip4);
+		ctx_len = RTE_ALIGN_CEIL(ctx_len, 8);
+		lp->ctx_len = ctx_len >> 3;
+	} else if (ctl->auth_type ==
+			OTX2_IPSEC_PO_SA_AUTH_SHA2_256) {
+		template = &sa->sha2.template;
+		ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
+				sha2.template) + sizeof(
+				sa->sha2.template.ip4);
+		ctx_len = RTE_ALIGN_CEIL(ctx_len, 8);
+		lp->ctx_len = ctx_len >> 3;
+	} else {
+		return -EINVAL;
+	}
+	ip = &template->ip4.ipv4_hdr;
+	if (ipsec->options.udp_encap) {
+		ip->next_proto_id = IPPROTO_UDP;
+		template->ip4.udp_src = rte_be_to_cpu_16(4500);
+		template->ip4.udp_dst = rte_be_to_cpu_16(4500);
+	} else {
+		ip->next_proto_id = IPPROTO_ESP;
+	}
 
+	if (ipsec->mode == RTE_SECURITY_IPSEC_SA_MODE_TUNNEL) {
 		if (ipsec->tunnel.type == RTE_SECURITY_IPSEC_TUNNEL_IPV4) {
-
-			if (ctl->enc_type == OTX2_IPSEC_PO_SA_ENC_AES_GCM) {
-				template = &sa->aes_gcm.template;
-				ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
-						aes_gcm.template) + sizeof(
-						sa->aes_gcm.template.ip4);
-				ctx_len = RTE_ALIGN_CEIL(ctx_len, 8);
-				lp->ctx_len = ctx_len >> 3;
-			} else if (ctl->auth_type ==
-					OTX2_IPSEC_PO_SA_AUTH_SHA1) {
-				template = &sa->sha1.template;
-				ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
-						sha1.template) + sizeof(
-						sa->sha1.template.ip4);
-				ctx_len = RTE_ALIGN_CEIL(ctx_len, 8);
-				lp->ctx_len = ctx_len >> 3;
-			} else if (ctl->auth_type ==
-					OTX2_IPSEC_PO_SA_AUTH_SHA2_256) {
-				template = &sa->sha2.template;
-				ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
-						sha2.template) + sizeof(
-						sa->sha2.template.ip4);
-				ctx_len = RTE_ALIGN_CEIL(ctx_len, 8);
-				lp->ctx_len = ctx_len >> 3;
-			} else {
-				return -EINVAL;
-			}
-			ip = &template->ip4.ipv4_hdr;
-			if (ipsec->options.udp_encap) {
-				ip->next_proto_id = IPPROTO_UDP;
-				template->ip4.udp_src = rte_be_to_cpu_16(4500);
-				template->ip4.udp_dst = rte_be_to_cpu_16(4500);
-			} else {
-				ip->next_proto_id = IPPROTO_ESP;
-			}
+			lp->mode_type = OTX2_IPSEC_PO_TUNNEL_IPV4;
 			ip->version_ihl = RTE_IPV4_VHL_DEF;
 			ip->time_to_live = ipsec->tunnel.ipv4.ttl;
 			ip->type_of_service |= (ipsec->tunnel.ipv4.dscp << 2);
@@ -294,6 +298,7 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 		} else if (ipsec->tunnel.type ==
 				RTE_SECURITY_IPSEC_TUNNEL_IPV6) {
 
+			lp->mode_type = OTX2_IPSEC_PO_TUNNEL_IPV6;
 			if (ctl->enc_type == OTX2_IPSEC_PO_SA_ENC_AES_GCM) {
 				template = &sa->aes_gcm.template;
 				ctx_len = offsetof(struct otx2_ipsec_po_out_sa,
@@ -343,11 +348,7 @@ crypto_sec_ipsec_outb_session_create(struct rte_cryptodev *crypto_dev,
 				sizeof(struct in6_addr));
 			memcpy(&ip6->dst_addr, &ipsec->tunnel.ipv6.dst_addr,
 				sizeof(struct in6_addr));
-		} else {
-			return -EINVAL;
 		}
-	} else {
-		return -EINVAL;
 	}
 
 	cipher_xform = crypto_xform;
@@ -428,13 +429,20 @@ crypto_sec_ipsec_inb_session_create(struct rte_cryptodev *crypto_dev,
 	if (ret)
 		return ret;
 
-	lp->tunnel_type = ipsec->tunnel.type;
+	lp->mode_type = OTX2_IPSEC_PO_TRANSPORT;
+
 	auth_xform = crypto_xform;
 	cipher_xform = crypto_xform->next;
 
 	cipher_key_len = 0;
 	auth_key_len = 0;
 
+	if (ipsec->mode == RTE_SECURITY_IPSEC_SA_MODE_TUNNEL)
+		lp->mode_type = (ipsec->tunnel.type ==
+				RTE_SECURITY_IPSEC_TUNNEL_IPV4) ?
+				OTX2_IPSEC_PO_TUNNEL_IPV4 :
+				OTX2_IPSEC_PO_TUNNEL_IPV6;
+
 	if (crypto_xform->type == RTE_CRYPTO_SYM_XFORM_AEAD) {
 		if (crypto_xform->aead.algo == RTE_CRYPTO_AEAD_AES_GCM)
 			memcpy(sa->iv.gcm.nonce, &ipsec->salt, 4);
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_sec.h b/drivers/crypto/octeontx2/otx2_cryptodev_sec.h
index 2849c1ab75..87f55c97fe 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_sec.h
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_sec.h
@@ -55,8 +55,8 @@ struct otx2_sec_session_ipsec_lp {
 	uint8_t iv_length;
 	/** Auth IV length in bytes */
 	uint8_t auth_iv_length;
-	/** IPsec tunnel type */
-	enum rte_security_ipsec_tunnel_type tunnel_type;
+	/** IPsec mode and tunnel type */
+	enum otx2_ipsec_po_mode_type mode_type;
 };
 
 int otx2_crypto_sec_ctx_create(struct rte_cryptodev *crypto_dev);
diff --git a/drivers/crypto/octeontx2/otx2_ipsec_po.h b/drivers/crypto/octeontx2/otx2_ipsec_po.h
index eda9f19738..b3e7456551 100644
--- a/drivers/crypto/octeontx2/otx2_ipsec_po.h
+++ b/drivers/crypto/octeontx2/otx2_ipsec_po.h
@@ -20,6 +20,12 @@
 
 #define OTX2_IPSEC_PO_INB_RPTR_HDR         0x8
 
+enum otx2_ipsec_po_mode_type {
+	OTX2_IPSEC_PO_TRANSPORT = 1,
+	OTX2_IPSEC_PO_TUNNEL_IPV4,
+	OTX2_IPSEC_PO_TUNNEL_IPV6,
+};
+
 enum otx2_ipsec_po_comp_e {
 	OTX2_IPSEC_PO_CC_SUCCESS = 0x00,
 	OTX2_IPSEC_PO_CC_AUTH_UNSUPPORTED = 0xB0,
diff --git a/drivers/crypto/octeontx2/otx2_ipsec_po_ops.h b/drivers/crypto/octeontx2/otx2_ipsec_po_ops.h
index f4cab19811..58b199f4f3 100644
--- a/drivers/crypto/octeontx2/otx2_ipsec_po_ops.h
+++ b/drivers/crypto/octeontx2/otx2_ipsec_po_ops.h
@@ -26,7 +26,7 @@ otx2_ipsec_po_out_rlen_get(struct otx2_sec_session_ipsec_lp *sess,
 
 static __rte_always_inline struct cpt_request_info *
 alloc_request_struct(char *maddr, void *cop, int mdata_len,
-		     enum rte_security_ipsec_tunnel_type tunnel_type)
+		     enum otx2_ipsec_po_mode_type mode_type)
 {
 	struct cpt_request_info *req;
 	struct cpt_meta_info *meta;
@@ -48,7 +48,7 @@ alloc_request_struct(char *maddr, void *cop, int mdata_len,
 	op[1] = (uintptr_t)cop;
 	op[2] = (uintptr_t)req;
 	op[3] = mdata_len;
-	op[4] = tunnel_type;
+	op[4] = mode_type;
 
 	return req;
 }
@@ -89,7 +89,7 @@ process_outb_sa(struct rte_crypto_op *cop,
 
 	mdata += extend_tail; /* mdata follows encrypted data */
 	req = alloc_request_struct(mdata, (void *)cop, mdata_len,
-		sess->tunnel_type);
+		sess->mode_type);
 
 	data = rte_pktmbuf_prepend(m_src, extend_head);
 	if (unlikely(data == NULL)) {
@@ -162,7 +162,7 @@ process_inb_sa(struct rte_crypto_op *cop,
 	}
 
 	req = alloc_request_struct(mdata, (void *)cop, mdata_len,
-		sess->tunnel_type);
+		sess->mode_type);
 
 	/* Prepare CPT instruction */
 	word0.u64 = sess->ucmd_w0;
-- 
2.27.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [dpdk-dev] [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets Tejasree Kondoj
@ 2021-04-08  8:33   ` Tejasree Kondoj
  2021-04-08 11:10   ` Olivier Matz
  1 sibling, 0 replies; 11+ messages in thread
From: Tejasree Kondoj @ 2021-04-08  8:33 UTC (permalink / raw)
  To: Tejasree Kondoj, Akhil Goyal, Radu Nicolau, Konstantin Ananyev,
	olivier.matz, andrew.rybchenko
  Cc: Anoob Joseph, Ankur Dwivedi, Jerin Jacob Kollanukkaran, dev,
	Ferruh Yigit, NBU-Contact-Thomas Monjalon

Hi Olivier, Andrew

Could you please review the patch?

Thanks
Tejasree

> -----Original Message-----
> From: Tejasree Kondoj <ktejasree@marvell.com>
> Sent: Thursday, April 8, 2021 1:47 PM
> To: Akhil Goyal <gakhil@marvell.com>; Radu Nicolau
> <radu.nicolau@intel.com>; Konstantin Ananyev
> <konstantin.ananyev@intel.com>
> Cc: Tejasree Kondoj <ktejasree@marvell.com>; Anoob Joseph
> <anoobj@marvell.com>; Ankur Dwivedi <adwivedi@marvell.com>; Jerin
> Jacob Kollanukkaran <jerinj@marvell.com>; dev@dpdk.org
> Subject: [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets
> 
> Adding new mbuf packet type for UDP encapsulated ESP packets.
> 
> Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
> ---
>  doc/guides/rel_notes/release_21_05.rst |  5 +++++
>  lib/librte_mbuf/rte_mbuf_ptype.h       | 21 +++++++++++++++++++++
>  2 files changed, 26 insertions(+)
> 
> diff --git a/doc/guides/rel_notes/release_21_05.rst
> b/doc/guides/rel_notes/release_21_05.rst
> index 5565c7637c..c9e9e2ec22 100644
> --- a/doc/guides/rel_notes/release_21_05.rst
> +++ b/doc/guides/rel_notes/release_21_05.rst
> @@ -55,6 +55,11 @@ New Features
>       Also, make sure to start the actual text at the margin.
>       =======================================================
> 
> +* **Added new packet type for UDP-ESP packets in mbuf.**
> +
> +  Added new packet type ``RTE_PTYPE_TUNNEL_ESP_IN_UDP`` which can be
> + used to identify UDP encapsulated ESP packets.
> +
>  * **Enhanced ethdev representor syntax.**
> 
>    * Introduced representor type of VF, SF and PF.
> diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h
> b/lib/librte_mbuf/rte_mbuf_ptype.h
> index 17a2dd3576..bf92ce0c1a 100644
> --- a/lib/librte_mbuf/rte_mbuf_ptype.h
> +++ b/lib/librte_mbuf/rte_mbuf_ptype.h
> @@ -491,6 +491,27 @@ extern "C" {
>   * | 'destination port'=6635>
>   */
>  #define RTE_PTYPE_TUNNEL_MPLS_IN_UDP      0x0000d000
> +/**
> + * ESP-in-UDP tunneling packet type (RFC 3948).
> + *
> + * Packet format:
> + * <'ether type'=0x0800
> + * | 'version'=4, 'protocol'=17
> + * | 'destination port'=4500>
> + * or,
> + * <'ether type'=0x86DD
> + * | 'version'=6, 'next header'=17
> + * | 'destination port'=4500>
> + * or,
> + * <'ether type'=0x0800
> + * | 'version'=4, 'protocol'=17
> + * | 'source port'=4500>
> + * or,
> + * <'ether type'=0x86DD
> + * | 'version'=6, 'next header'=17
> + * | 'source port'=4500>
> + */
> +#define RTE_PTYPE_TUNNEL_ESP_IN_UDP       0x0000e000
>  /**
>   * Mask of tunneling packet types.
>   */
> --
> 2.27.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [dpdk-dev] [PATCH v3 3/4] examples/ipsec-secgw: add UDP encapsulation support
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 3/4] examples/ipsec-secgw: add UDP encapsulation support Tejasree Kondoj
@ 2021-04-08 10:45   ` Ananyev, Konstantin
  0 siblings, 0 replies; 11+ messages in thread
From: Ananyev, Konstantin @ 2021-04-08 10:45 UTC (permalink / raw)
  To: Tejasree Kondoj, Akhil Goyal, Nicolau, Radu
  Cc: Anoob Joseph, Ankur Dwivedi, Jerin Jacob, dev



> Adding lookaside IPsec UDP encapsulation support
> for NAT traversal.
> Application has to add udp-encap option to sa config file
> to enable UDP encapsulation on the SA.
> 
> Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
> ---

Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

> 2.27.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [dpdk-dev] [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets
  2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets Tejasree Kondoj
  2021-04-08  8:33   ` Tejasree Kondoj
@ 2021-04-08 11:10   ` Olivier Matz
  2021-04-09 10:56     ` [dpdk-dev] [EXT] " Akhil Goyal
  1 sibling, 1 reply; 11+ messages in thread
From: Olivier Matz @ 2021-04-08 11:10 UTC (permalink / raw)
  To: Tejasree Kondoj
  Cc: Akhil Goyal, Radu Nicolau, Konstantin Ananyev, Anoob Joseph,
	Ankur Dwivedi, Jerin Jacob, dev

On Thu, Apr 08, 2021 at 01:47:18PM +0530, Tejasree Kondoj wrote:
> Adding new mbuf packet type for UDP encapsulated
> ESP packets.
> 
> Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
> ---
>  doc/guides/rel_notes/release_21_05.rst |  5 +++++
>  lib/librte_mbuf/rte_mbuf_ptype.h       | 21 +++++++++++++++++++++
>  2 files changed, 26 insertions(+)
> 
> diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst
> index 5565c7637c..c9e9e2ec22 100644
> --- a/doc/guides/rel_notes/release_21_05.rst
> +++ b/doc/guides/rel_notes/release_21_05.rst
> @@ -55,6 +55,11 @@ New Features
>       Also, make sure to start the actual text at the margin.
>       =======================================================
>  
> +* **Added new packet type for UDP-ESP packets in mbuf.**
> +
> +  Added new packet type ``RTE_PTYPE_TUNNEL_ESP_IN_UDP`` which can be
> +  used to identify UDP encapsulated ESP packets.
> +
>  * **Enhanced ethdev representor syntax.**
>  
>    * Introduced representor type of VF, SF and PF.
> diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h b/lib/librte_mbuf/rte_mbuf_ptype.h
> index 17a2dd3576..bf92ce0c1a 100644
> --- a/lib/librte_mbuf/rte_mbuf_ptype.h
> +++ b/lib/librte_mbuf/rte_mbuf_ptype.h
> @@ -491,6 +491,27 @@ extern "C" {
>   * | 'destination port'=6635>
>   */
>  #define RTE_PTYPE_TUNNEL_MPLS_IN_UDP      0x0000d000
> +/**
> + * ESP-in-UDP tunneling packet type (RFC 3948).
> + *
> + * Packet format:
> + * <'ether type'=0x0800
> + * | 'version'=4, 'protocol'=17
> + * | 'destination port'=4500>
> + * or,
> + * <'ether type'=0x86DD
> + * | 'version'=6, 'next header'=17
> + * | 'destination port'=4500>
> + * or,
> + * <'ether type'=0x0800
> + * | 'version'=4, 'protocol'=17
> + * | 'source port'=4500>
> + * or,
> + * <'ether type'=0x86DD
> + * | 'version'=6, 'next header'=17
> + * | 'source port'=4500>
> + */
> +#define RTE_PTYPE_TUNNEL_ESP_IN_UDP       0x0000e000
>  /**
>   * Mask of tunneling packet types.
>   */

We arrive at the end of the values in packet type tunnel types,
and there is another pending patch that needs another tunnel type.

As there is already a RTE_PTYPE_TUNNEL_ESP, what would you think about
trying to reuse it, and differentiate IP/ESP from IP/UDP/ESP by using
the L4 layer type (unknown vs udp)? Or maybe add RTE_PTYPE_L4_NONE.

It is sensible, because it can be considered as an API change for
current users of RTE_PTYPE_TUNNEL_ESP. I don't really know how this
type is used by applications.

I think it is time to start thinking about how the packet_type
mbuf API can evolve to solve this issue.

By the way, the update of *rte_get_ptype_tunnel_name() is missing.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [dpdk-dev] [EXT] Re: [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets
  2021-04-08 11:10   ` Olivier Matz
@ 2021-04-09 10:56     ` Akhil Goyal
  2021-04-13 13:03       ` Akhil Goyal
  0 siblings, 1 reply; 11+ messages in thread
From: Akhil Goyal @ 2021-04-09 10:56 UTC (permalink / raw)
  To: Olivier Matz, Tejasree Kondoj, Konstantin Ananyev
  Cc: Radu Nicolau, Anoob Joseph, Ankur Dwivedi,
	Jerin Jacob Kollanukkaran, dev

Hi Olivier,
> On Thu, Apr 08, 2021 at 01:47:18PM +0530, Tejasree Kondoj wrote:
> > Adding new mbuf packet type for UDP encapsulated
> > ESP packets.
> >
> > Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
> > ---
> >  doc/guides/rel_notes/release_21_05.rst |  5 +++++
> >  lib/librte_mbuf/rte_mbuf_ptype.h       | 21 +++++++++++++++++++++
> >  2 files changed, 26 insertions(+)
> >
> > diff --git a/doc/guides/rel_notes/release_21_05.rst
> b/doc/guides/rel_notes/release_21_05.rst
> > index 5565c7637c..c9e9e2ec22 100644
> > --- a/doc/guides/rel_notes/release_21_05.rst
> > +++ b/doc/guides/rel_notes/release_21_05.rst
> > @@ -55,6 +55,11 @@ New Features
> >       Also, make sure to start the actual text at the margin.
> >       =======================================================
> >
> > +* **Added new packet type for UDP-ESP packets in mbuf.**
> > +
> > +  Added new packet type ``RTE_PTYPE_TUNNEL_ESP_IN_UDP`` which can
> be
> > +  used to identify UDP encapsulated ESP packets.
> > +
> >  * **Enhanced ethdev representor syntax.**
> >
> >    * Introduced representor type of VF, SF and PF.
> > diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h
> b/lib/librte_mbuf/rte_mbuf_ptype.h
> > index 17a2dd3576..bf92ce0c1a 100644
> > --- a/lib/librte_mbuf/rte_mbuf_ptype.h
> > +++ b/lib/librte_mbuf/rte_mbuf_ptype.h
> > @@ -491,6 +491,27 @@ extern "C" {
> >   * | 'destination port'=6635>
> >   */
> >  #define RTE_PTYPE_TUNNEL_MPLS_IN_UDP      0x0000d000
> > +/**
> > + * ESP-in-UDP tunneling packet type (RFC 3948).
> > + *
> > + * Packet format:
> > + * <'ether type'=0x0800
> > + * | 'version'=4, 'protocol'=17
> > + * | 'destination port'=4500>
> > + * or,
> > + * <'ether type'=0x86DD
> > + * | 'version'=6, 'next header'=17
> > + * | 'destination port'=4500>
> > + * or,
> > + * <'ether type'=0x0800
> > + * | 'version'=4, 'protocol'=17
> > + * | 'source port'=4500>
> > + * or,
> > + * <'ether type'=0x86DD
> > + * | 'version'=6, 'next header'=17
> > + * | 'source port'=4500>
> > + */
> > +#define RTE_PTYPE_TUNNEL_ESP_IN_UDP       0x0000e000
> >  /**
> >   * Mask of tunneling packet types.
> >   */
> 
> We arrive at the end of the values in packet type tunnel types,
> and there is another pending patch that needs another tunnel type.
> 
> As there is already a RTE_PTYPE_TUNNEL_ESP, what would you think about
> trying to reuse it, and differentiate IP/ESP from IP/UDP/ESP by using
> the L4 layer type (unknown vs udp)? Or maybe add RTE_PTYPE_L4_NONE.
> 
> It is sensible, because it can be considered as an API change for
> current users of RTE_PTYPE_TUNNEL_ESP. I don't really know how this
> type is used by applications.

It is OK to use combination of these two but with an assumption
that a normal - IP-UDP packet when encrypted will be an IP-ESP packet
And L4 types are reset from the mbuf->packet_type by the driver.
@Konstantin Ananyev: Are you OK with this assumption?

And, if we choose this path, then also we may need a macro in this file,
So that application doesn't have to combine that explicitly for a standard use case.
#define RTE_PTYPE_TUNNEL_ESP_IN_UDP       RTE_PTYPE_TUNNEL_ESP | RTE_PTYPE_L4_UDP

Will this be fine?

> 
> I think it is time to start thinking about how the packet_type
> mbuf API can evolve to solve this issue.
> 
> By the way, the update of *rte_get_ptype_tunnel_name() is missing.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [dpdk-dev] [EXT] Re: [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets
  2021-04-09 10:56     ` [dpdk-dev] [EXT] " Akhil Goyal
@ 2021-04-13 13:03       ` Akhil Goyal
  2021-04-13 15:46         ` Ananyev, Konstantin
  0 siblings, 1 reply; 11+ messages in thread
From: Akhil Goyal @ 2021-04-13 13:03 UTC (permalink / raw)
  To: Olivier Matz, Tejasree Kondoj, Konstantin Ananyev
  Cc: Radu Nicolau, Anoob Joseph, Ankur Dwivedi,
	Jerin Jacob Kollanukkaran, dev

 Hi Olivier/ Konstantin,
> > On Thu, Apr 08, 2021 at 01:47:18PM +0530, Tejasree Kondoj wrote:
> > > Adding new mbuf packet type for UDP encapsulated
> > > ESP packets.
> > >
> > > Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
> > > ---
> > >  doc/guides/rel_notes/release_21_05.rst |  5 +++++
> > >  lib/librte_mbuf/rte_mbuf_ptype.h       | 21 +++++++++++++++++++++
> > >  2 files changed, 26 insertions(+)
> > >
> > > diff --git a/doc/guides/rel_notes/release_21_05.rst
> > b/doc/guides/rel_notes/release_21_05.rst
> > > index 5565c7637c..c9e9e2ec22 100644
> > > --- a/doc/guides/rel_notes/release_21_05.rst
> > > +++ b/doc/guides/rel_notes/release_21_05.rst
> > > @@ -55,6 +55,11 @@ New Features
> > >       Also, make sure to start the actual text at the margin.
> > >       =======================================================
> > >
> > > +* **Added new packet type for UDP-ESP packets in mbuf.**
> > > +
> > > +  Added new packet type ``RTE_PTYPE_TUNNEL_ESP_IN_UDP`` which can
> > be
> > > +  used to identify UDP encapsulated ESP packets.
> > > +
> > >  * **Enhanced ethdev representor syntax.**
> > >
> > >    * Introduced representor type of VF, SF and PF.
> > > diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h
> > b/lib/librte_mbuf/rte_mbuf_ptype.h
> > > index 17a2dd3576..bf92ce0c1a 100644
> > > --- a/lib/librte_mbuf/rte_mbuf_ptype.h
> > > +++ b/lib/librte_mbuf/rte_mbuf_ptype.h
> > > @@ -491,6 +491,27 @@ extern "C" {
> > >   * | 'destination port'=6635>
> > >   */
> > >  #define RTE_PTYPE_TUNNEL_MPLS_IN_UDP      0x0000d000
> > > +/**
> > > + * ESP-in-UDP tunneling packet type (RFC 3948).
> > > + *
> > > + * Packet format:
> > > + * <'ether type'=0x0800
> > > + * | 'version'=4, 'protocol'=17
> > > + * | 'destination port'=4500>
> > > + * or,
> > > + * <'ether type'=0x86DD
> > > + * | 'version'=6, 'next header'=17
> > > + * | 'destination port'=4500>
> > > + * or,
> > > + * <'ether type'=0x0800
> > > + * | 'version'=4, 'protocol'=17
> > > + * | 'source port'=4500>
> > > + * or,
> > > + * <'ether type'=0x86DD
> > > + * | 'version'=6, 'next header'=17
> > > + * | 'source port'=4500>
> > > + */
> > > +#define RTE_PTYPE_TUNNEL_ESP_IN_UDP       0x0000e000
> > >  /**
> > >   * Mask of tunneling packet types.
> > >   */
> >
> > We arrive at the end of the values in packet type tunnel types,
> > and there is another pending patch that needs another tunnel type.
> >
> > As there is already a RTE_PTYPE_TUNNEL_ESP, what would you think about
> > trying to reuse it, and differentiate IP/ESP from IP/UDP/ESP by using
> > the L4 layer type (unknown vs udp)? Or maybe add RTE_PTYPE_L4_NONE.
> >
> > It is sensible, because it can be considered as an API change for
> > current users of RTE_PTYPE_TUNNEL_ESP. I don't really know how this
> > type is used by applications.
> 
> It is OK to use combination of these two but with an assumption
> that a normal - IP-UDP packet when encrypted will be an IP-ESP packet
> And L4 types are reset from the mbuf->packet_type by the driver.
> @Konstantin Ananyev: Are you OK with this assumption?
> 
> And, if we choose this path, then also we may need a macro in this file,
> So that application doesn't have to combine that explicitly for a standard use
> case.
> #define RTE_PTYPE_TUNNEL_ESP_IN_UDP       RTE_PTYPE_TUNNEL_ESP |
> RTE_PTYPE_L4_UDP
> 
> Will this be fine?
> 
Can we proceed with this approach?

Regards,
Akhil

> >
> > I think it is time to start thinking about how the packet_type
> > mbuf API can evolve to solve this issue.
> >
> > By the way, the update of *rte_get_ptype_tunnel_name() is missing.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [dpdk-dev] [EXT] Re: [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets
  2021-04-13 13:03       ` Akhil Goyal
@ 2021-04-13 15:46         ` Ananyev, Konstantin
  0 siblings, 0 replies; 11+ messages in thread
From: Ananyev, Konstantin @ 2021-04-13 15:46 UTC (permalink / raw)
  To: Akhil Goyal, Olivier Matz, Tejasree Kondoj
  Cc: Nicolau, Radu, Anoob Joseph, Ankur Dwivedi,
	Jerin Jacob Kollanukkaran, dev

Hi Akhil,

> 
>  Hi Olivier/ Konstantin,
> > > On Thu, Apr 08, 2021 at 01:47:18PM +0530, Tejasree Kondoj wrote:
> > > > Adding new mbuf packet type for UDP encapsulated
> > > > ESP packets.
> > > >
> > > > Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
> > > > ---
> > > >  doc/guides/rel_notes/release_21_05.rst |  5 +++++
> > > >  lib/librte_mbuf/rte_mbuf_ptype.h       | 21 +++++++++++++++++++++
> > > >  2 files changed, 26 insertions(+)
> > > >
> > > > diff --git a/doc/guides/rel_notes/release_21_05.rst
> > > b/doc/guides/rel_notes/release_21_05.rst
> > > > index 5565c7637c..c9e9e2ec22 100644
> > > > --- a/doc/guides/rel_notes/release_21_05.rst
> > > > +++ b/doc/guides/rel_notes/release_21_05.rst
> > > > @@ -55,6 +55,11 @@ New Features
> > > >       Also, make sure to start the actual text at the margin.
> > > >       =======================================================
> > > >
> > > > +* **Added new packet type for UDP-ESP packets in mbuf.**
> > > > +
> > > > +  Added new packet type ``RTE_PTYPE_TUNNEL_ESP_IN_UDP`` which can
> > > be
> > > > +  used to identify UDP encapsulated ESP packets.
> > > > +
> > > >  * **Enhanced ethdev representor syntax.**
> > > >
> > > >    * Introduced representor type of VF, SF and PF.
> > > > diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h
> > > b/lib/librte_mbuf/rte_mbuf_ptype.h
> > > > index 17a2dd3576..bf92ce0c1a 100644
> > > > --- a/lib/librte_mbuf/rte_mbuf_ptype.h
> > > > +++ b/lib/librte_mbuf/rte_mbuf_ptype.h
> > > > @@ -491,6 +491,27 @@ extern "C" {
> > > >   * | 'destination port'=6635>
> > > >   */
> > > >  #define RTE_PTYPE_TUNNEL_MPLS_IN_UDP      0x0000d000
> > > > +/**
> > > > + * ESP-in-UDP tunneling packet type (RFC 3948).
> > > > + *
> > > > + * Packet format:
> > > > + * <'ether type'=0x0800
> > > > + * | 'version'=4, 'protocol'=17
> > > > + * | 'destination port'=4500>
> > > > + * or,
> > > > + * <'ether type'=0x86DD
> > > > + * | 'version'=6, 'next header'=17
> > > > + * | 'destination port'=4500>
> > > > + * or,
> > > > + * <'ether type'=0x0800
> > > > + * | 'version'=4, 'protocol'=17
> > > > + * | 'source port'=4500>
> > > > + * or,
> > > > + * <'ether type'=0x86DD
> > > > + * | 'version'=6, 'next header'=17
> > > > + * | 'source port'=4500>
> > > > + */
> > > > +#define RTE_PTYPE_TUNNEL_ESP_IN_UDP       0x0000e000
> > > >  /**
> > > >   * Mask of tunneling packet types.
> > > >   */
> > >
> > > We arrive at the end of the values in packet type tunnel types,
> > > and there is another pending patch that needs another tunnel type.
> > >
> > > As there is already a RTE_PTYPE_TUNNEL_ESP, what would you think about
> > > trying to reuse it, and differentiate IP/ESP from IP/UDP/ESP by using
> > > the L4 layer type (unknown vs udp)? Or maybe add RTE_PTYPE_L4_NONE.
> > >
> > > It is sensible, because it can be considered as an API change for
> > > current users of RTE_PTYPE_TUNNEL_ESP. I don't really know how this
> > > type is used by applications.
> >
> > It is OK to use combination of these two but with an assumption
> > that a normal - IP-UDP packet when encrypted will be an IP-ESP packet
> > And L4 types are reset from the mbuf->packet_type by the driver.
> > @Konstantin Ananyev: Are you OK with this assumption?
> >
> > And, if we choose this path, then also we may need a macro in this file,
> > So that application doesn't have to combine that explicitly for a standard use
> > case.
> > #define RTE_PTYPE_TUNNEL_ESP_IN_UDP       RTE_PTYPE_TUNNEL_ESP |
> > RTE_PTYPE_L4_UDP
> >
> > Will this be fine?
> >
> Can we proceed with this approach?

I think we can safely use such combination inside ipsec-secgw app.
About making it a new generic type - I am not so sure. 
As Olivier already pointed out - it looks like an API/behaviour breakage to me. 

> Regards,
> Akhil
> 
> > >
> > > I think it is time to start thinking about how the packet_type
> > > mbuf API can evolve to solve this issue.

+1
Might be it needs to be reworked completely.

> > >
> > > By the way, the update of *rte_get_ptype_tunnel_name() is missing.

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2021-04-13 15:47 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-08  8:17 [dpdk-dev] [PATCH v3 0/4] add lookaside IPsec UDP encapsulation and transport mode Tejasree Kondoj
2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 1/4] crypto/octeontx2: add UDP encapsulation support Tejasree Kondoj
2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 2/4] mbuf: add packet type for UDP-ESP tunnel packets Tejasree Kondoj
2021-04-08  8:33   ` Tejasree Kondoj
2021-04-08 11:10   ` Olivier Matz
2021-04-09 10:56     ` [dpdk-dev] [EXT] " Akhil Goyal
2021-04-13 13:03       ` Akhil Goyal
2021-04-13 15:46         ` Ananyev, Konstantin
2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 3/4] examples/ipsec-secgw: add UDP encapsulation support Tejasree Kondoj
2021-04-08 10:45   ` Ananyev, Konstantin
2021-04-08  8:17 ` [dpdk-dev] [PATCH v3 4/4] crypto/octeontx2: support lookaside IPv4 transport mode Tejasree Kondoj

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git