[dpdk-dev] [PATCH 2/2] net/mlx5: control rules with identical pattern behavior

[Jiawei Wang <jiaweiw@nvidia.com>]

In order to allow\disallow configuring rules with identical
patterns, the new device argument 'allow_duplicate_pattern'
is introduced.
If allow, these rules be inserted successfully and only the
first rule take affect.
If disallow, the first rule will be inserted and other rules
be rejected.

The default is to allow.
Set it to 0 if disallow, for example:
	-a <PCI_BDF>,allow_duplicate_pattern=0

Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
---
 doc/guides/nics/mlx5.rst               | 10 ++++++++++
 doc/guides/rel_notes/release_21_08.rst |  6 ++++++
 drivers/net/mlx5/linux/mlx5_os.c       |  7 +++++++
 drivers/net/mlx5/mlx5.c                |  6 ++++++
 drivers/net/mlx5/mlx5.h                |  2 ++
 drivers/net/mlx5/mlx5_flow_dv.c        |  3 +++
 6 files changed, 34 insertions(+)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 83299646dd..26f4a25441 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -1058,6 +1058,16 @@ Driver options
 
   By default, the PMD will set this value to 1.
 
+- ``allow_duplicate_pattern`` parameter [int]
+
+  There are two options to choose:
+
+  - 0. Prevent insertion of rules with the same pattern items on non-root table.
+
+  - 1. Allow insertion of rules with the same pattern items.
+
+  By default, the PMD will set this value to 1.
+
 .. _mlx5_firmware_config:
 
 Firmware configuration
diff --git a/doc/guides/rel_notes/release_21_08.rst b/doc/guides/rel_notes/release_21_08.rst
index a6ecfdf3ce..e6f696a71d 100644
--- a/doc/guides/rel_notes/release_21_08.rst
+++ b/doc/guides/rel_notes/release_21_08.rst
@@ -55,6 +55,12 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Updated Mellanox mlx5 net driver and common layer.**
+
+  Updated Mellanox mlx5 driver with new features and improvements, including:
+
+  * Added devargs options ``allow_duplicate_pattern``.
+
 
 Removed Items
 -------------
diff --git a/drivers/net/mlx5/linux/mlx5_os.c b/drivers/net/mlx5/linux/mlx5_os.c
index 534a56a555..7c4384ca77 100644
--- a/drivers/net/mlx5/linux/mlx5_os.c
+++ b/drivers/net/mlx5/linux/mlx5_os.c
@@ -355,6 +355,12 @@ mlx5_alloc_shared_dr(struct mlx5_priv *priv)
 			mlx5_glue->dr_reclaim_domain_memory(sh->fdb_domain, 1);
 	}
 	sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan();
+	if (!priv->config.allow_duplicate_pattern) {
+		mlx5_glue->dr_allow_duplicate_rules(sh->rx_domain, 0);
+		mlx5_glue->dr_allow_duplicate_rules(sh->tx_domain, 0);
+		if (sh->fdb_domain)
+			mlx5_glue->dr_allow_duplicate_rules(sh->fdb_domain, 0);
+	}
 #endif /* HAVE_MLX5DV_DR */
 	sh->default_miss_action =
 			mlx5_glue->dr_create_flow_action_default_miss();
@@ -2359,6 +2365,7 @@ mlx5_os_pci_probe_pf(struct rte_pci_device *pci_dev,
 		dev_config.dv_flow_en = 1;
 		dev_config.decap_en = 1;
 		dev_config.log_hp_size = MLX5_ARG_UNSET;
+		dev_config.allow_duplicate_pattern = 1;
 		list[i].eth_dev = mlx5_dev_spawn(&pci_dev->device,
 						 &list[i],
 						 &dev_config,
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index cf1815cb74..ef15b115d8 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -175,6 +175,9 @@
 /* Decap will be used or not. */
 #define MLX5_DECAP_EN "decap_en"
 
+/* Device parameter to configure allow or prevent duplicate rules pattern. */
+#define MLX5_ALLOW_DUPLICATE_PATTERN "allow_duplicate_pattern"
+
 /* Shared memory between primary and secondary processes. */
 struct mlx5_shared_data *mlx5_shared_data;
 
@@ -1948,6 +1951,8 @@ mlx5_args_check(const char *key, const char *val, void *opaque)
 		config->sys_mem_en = !!tmp;
 	} else if (strcmp(MLX5_DECAP_EN, key) == 0) {
 		config->decap_en = !!tmp;
+	} else if (strcmp(MLX5_ALLOW_DUPLICATE_PATTERN, key) == 0) {
+		config->allow_duplicate_pattern = !!tmp;
 	} else {
 		DRV_LOG(WARNING, "%s: unknown parameter", key);
 		rte_errno = EINVAL;
@@ -2007,6 +2012,7 @@ mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
 		MLX5_RECLAIM_MEM,
 		MLX5_SYS_MEM_EN,
 		MLX5_DECAP_EN,
+		MLX5_ALLOW_DUPLICATE_PATTERN,
 		NULL,
 	};
 	struct rte_kvargs *kvlist;
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 32b2817bf2..63e7779d6f 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -244,6 +244,8 @@ struct mlx5_dev_config {
 	unsigned int sys_mem_en:1; /* The default memory allocator. */
 	unsigned int decap_en:1; /* Whether decap will be used or not. */
 	unsigned int dv_miss_info:1; /* restore packet after partial hw miss */
+	unsigned int allow_duplicate_pattern:1;
+	/* Allow/Prevent the duplicate rules pattern. */
 	struct {
 		unsigned int enabled:1; /* Whether MPRQ is enabled. */
 		unsigned int stride_num_n; /* Number of strides. */
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index c50649a107..17d5a942d8 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -13299,6 +13299,9 @@ flow_dv_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
 					   RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
 					   NULL,
 					   "hardware refuses to create flow");
+			if (!priv->config.allow_duplicate_pattern &&
+			     errno == EEXIST)
+				DRV_LOG(INFO, "duplicate rules not supported");
 			goto error;
 		}
 		if (priv->vmwa_context &&
-- 
2.18.1