DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v5 08/24] net/ngbe: init and validate EEPROM
Date: Wed,  2 Jun 2021 17:40:52 +0800	[thread overview]
Message-ID: <20210602094108.1575640-9-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20210602094108.1575640-1-jiawenwu@trustnetic.com>

Reset swfw lock before NVM access, init EEPROM and validate the
checksum.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 drivers/net/ngbe/base/meson.build   |   2 +
 drivers/net/ngbe/base/ngbe_dummy.h  |  23 ++++
 drivers/net/ngbe/base/ngbe_eeprom.c | 203 ++++++++++++++++++++++++++++
 drivers/net/ngbe/base/ngbe_eeprom.h |  17 +++
 drivers/net/ngbe/base/ngbe_hw.c     |  83 ++++++++++++
 drivers/net/ngbe/base/ngbe_hw.h     |   3 +
 drivers/net/ngbe/base/ngbe_mng.c    | 198 +++++++++++++++++++++++++++
 drivers/net/ngbe/base/ngbe_mng.h    |  65 +++++++++
 drivers/net/ngbe/base/ngbe_type.h   |  24 ++++
 drivers/net/ngbe/ngbe_ethdev.c      |  39 ++++++
 10 files changed, 657 insertions(+)
 create mode 100644 drivers/net/ngbe/base/ngbe_eeprom.c
 create mode 100644 drivers/net/ngbe/base/ngbe_eeprom.h
 create mode 100644 drivers/net/ngbe/base/ngbe_mng.c
 create mode 100644 drivers/net/ngbe/base/ngbe_mng.h

diff --git a/drivers/net/ngbe/base/meson.build b/drivers/net/ngbe/base/meson.build
index fdbfa99916..ddd122ec45 100644
--- a/drivers/net/ngbe/base/meson.build
+++ b/drivers/net/ngbe/base/meson.build
@@ -2,7 +2,9 @@
 # Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
 
 sources = [
+	'ngbe_eeprom.c',
 	'ngbe_hw.c',
+	'ngbe_mng.c',
 ]
 
 error_cflags = []
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index 75b4e50bca..ade03eae81 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -28,9 +28,32 @@
 static inline void ngbe_bus_set_lan_id_dummy(struct ngbe_hw *TUP0)
 {
 }
+/* struct ngbe_rom_operations */
+static inline s32 ngbe_rom_init_params_dummy(struct ngbe_hw *TUP0)
+{
+	return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_rom_validate_checksum_dummy(struct ngbe_hw *TUP0,
+					u16 *TUP1)
+{
+	return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_acquire_swfw_sync_dummy(struct ngbe_hw *TUP0,
+					u32 TUP1)
+{
+	return NGBE_ERR_OPS_DUMMY;
+}
+static inline void ngbe_mac_release_swfw_sync_dummy(struct ngbe_hw *TUP0,
+					u32 TUP1)
+{
+}
 static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
 {
 	hw->bus.set_lan_id = ngbe_bus_set_lan_id_dummy;
+	hw->rom.init_params = ngbe_rom_init_params_dummy;
+	hw->rom.validate_checksum = ngbe_rom_validate_checksum_dummy;
+	hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
+	hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
 }
 
 #endif /* _NGBE_TYPE_DUMMY_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_eeprom.c b/drivers/net/ngbe/base/ngbe_eeprom.c
new file mode 100644
index 0000000000..0ebbb7a29e
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_eeprom.c
@@ -0,0 +1,203 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#include "ngbe_hw.h"
+#include "ngbe_mng.h"
+#include "ngbe_eeprom.h"
+
+/**
+ *  ngbe_init_eeprom_params - Initialize EEPROM params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ngbe_rom_info within the
+ *  ngbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ngbe_init_eeprom_params(struct ngbe_hw *hw)
+{
+	struct ngbe_rom_info *eeprom = &hw->rom;
+	u32 eec;
+	u16 eeprom_size;
+
+	DEBUGFUNC("ngbe_init_eeprom_params");
+
+	if (eeprom->type != ngbe_eeprom_unknown)
+		return 0;
+
+	eeprom->type = ngbe_eeprom_none;
+	/* Set default semaphore delay to 10ms which is a well
+	 * tested value
+	 */
+	eeprom->semaphore_delay = 10; /*ms*/
+	/* Clear EEPROM page size, it will be initialized as needed */
+	eeprom->word_page_size = 0;
+
+	/*
+	 * Check for EEPROM present first.
+	 * If not present leave as none
+	 */
+	eec = rd32(hw, NGBE_SPISTAT);
+	if (!(eec & NGBE_SPISTAT_BPFLASH)) {
+		eeprom->type = ngbe_eeprom_flash;
+
+		/*
+		 * SPI EEPROM is assumed here.  This code would need to
+		 * change if a future EEPROM is not SPI.
+		 */
+		eeprom_size = 4096;
+		eeprom->word_size = eeprom_size >> 1;
+	}
+
+	eeprom->address_bits = 16;
+	eeprom->sw_addr = 0x80;
+
+	DEBUGOUT("eeprom params: type = %d, size = %d, address bits: "
+		  "%d %d\n", eeprom->type, eeprom->word_size,
+		  eeprom->address_bits, eeprom->sw_addr);
+
+	return 0;
+}
+
+/**
+ *  ngbe_get_eeprom_semaphore - Get hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the hardware semaphores so EEPROM access can occur for bit-bang method
+ **/
+s32 ngbe_get_eeprom_semaphore(struct ngbe_hw *hw)
+{
+	s32 status = NGBE_ERR_EEPROM;
+	u32 timeout = 2000;
+	u32 i;
+	u32 swsm;
+
+	DEBUGFUNC("ngbe_get_eeprom_semaphore");
+
+
+	/* Get SMBI software semaphore between device drivers first */
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = rd32(hw, NGBE_SWSEM);
+		if (!(swsm & NGBE_SWSEM_PF)) {
+			status = 0;
+			break;
+		}
+		usec_delay(50);
+	}
+
+	if (i == timeout) {
+		DEBUGOUT("Driver can't access the eeprom - SMBI Semaphore "
+			 "not granted.\n");
+		/*
+		 * this release is particularly important because our attempts
+		 * above to get the semaphore may have succeeded, and if there
+		 * was a timeout, we should unconditionally clear the semaphore
+		 * bits to free the driver to make progress
+		 */
+		ngbe_release_eeprom_semaphore(hw);
+
+		usec_delay(50);
+		/*
+		 * one last try
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = rd32(hw, NGBE_SWSEM);
+		if (!(swsm & NGBE_SWSEM_PF))
+			status = 0;
+	}
+
+	/* Now get the semaphore between SW/FW through the SWESMBI bit */
+	if (status == 0) {
+		for (i = 0; i < timeout; i++) {
+			/* Set the SW EEPROM semaphore bit to request access */
+			wr32m(hw, NGBE_MNGSWSYNC,
+				NGBE_MNGSWSYNC_REQ, NGBE_MNGSWSYNC_REQ);
+
+			/*
+			 * If we set the bit successfully then we got the
+			 * semaphore.
+			 */
+			swsm = rd32(hw, NGBE_MNGSWSYNC);
+			if (swsm & NGBE_MNGSWSYNC_REQ)
+				break;
+
+			usec_delay(50);
+		}
+
+		/*
+		 * Release semaphores and return error if SW EEPROM semaphore
+		 * was not granted because we don't have access to the EEPROM
+		 */
+		if (i >= timeout) {
+			DEBUGOUT("SWESMBI Software EEPROM semaphore not granted.\n");
+			ngbe_release_eeprom_semaphore(hw);
+			status = NGBE_ERR_EEPROM;
+		}
+	} else {
+		DEBUGOUT("Software semaphore SMBI between device drivers "
+			 "not granted.\n");
+	}
+
+	return status;
+}
+
+/**
+ *  ngbe_release_eeprom_semaphore - Release hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  This function clears hardware semaphore bits.
+ **/
+void ngbe_release_eeprom_semaphore(struct ngbe_hw *hw)
+{
+	DEBUGFUNC("ngbe_release_eeprom_semaphore");
+
+	wr32m(hw, NGBE_MNGSWSYNC, NGBE_MNGSWSYNC_REQ, 0);
+	wr32m(hw, NGBE_SWSEM, NGBE_SWSEM_PF, 0);
+	ngbe_flush(hw);
+}
+
+/**
+ *  ngbe_validate_eeprom_checksum_em - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ngbe_validate_eeprom_checksum_em(struct ngbe_hw *hw,
+					   u16 *checksum_val)
+{
+	u32 eeprom_cksum_devcap = 0;
+	int err = 0;
+
+	DEBUGFUNC("ngbe_validate_eeprom_checksum_em");
+	UNREFERENCED_PARAMETER(checksum_val);
+
+	/* Check EEPROM only once */
+	if (hw->bus.lan_id == 0) {
+		wr32(hw, NGBE_CALSUM_CAP_STATUS, 0x0);
+		wr32(hw, NGBE_EEPROM_VERSION_STORE_REG, 0x0);
+	} else {
+		eeprom_cksum_devcap = rd32(hw, NGBE_CALSUM_CAP_STATUS);
+		hw->rom.saved_version = rd32(hw, NGBE_EEPROM_VERSION_STORE_REG);
+	}
+
+	if (hw->bus.lan_id == 0 || eeprom_cksum_devcap == 0) {
+		err = ngbe_hic_check_cap(hw);
+		if (err != 0) {
+			PMD_INIT_LOG(ERR,
+				"The EEPROM checksum is not valid: %d", err);
+			return -EIO;
+		}
+	}
+
+	hw->rom.cksum_devcap = eeprom_cksum_devcap & 0xffff;
+
+	return err;
+}
+
diff --git a/drivers/net/ngbe/base/ngbe_eeprom.h b/drivers/net/ngbe/base/ngbe_eeprom.h
new file mode 100644
index 0000000000..0c2819df4a
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_eeprom.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_EEPROM_H_
+#define _NGBE_EEPROM_H_
+
+#define NGBE_CALSUM_CAP_STATUS         0x10224
+#define NGBE_EEPROM_VERSION_STORE_REG  0x1022C
+
+s32 ngbe_init_eeprom_params(struct ngbe_hw *hw);
+s32 ngbe_validate_eeprom_checksum_em(struct ngbe_hw *hw, u16 *checksum_val);
+s32 ngbe_get_eeprom_semaphore(struct ngbe_hw *hw);
+void ngbe_release_eeprom_semaphore(struct ngbe_hw *hw);
+
+#endif /* _NGBE_EEPROM_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 014bb0faee..de6b75e1c0 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -4,6 +4,8 @@
  */
 
 #include "ngbe_type.h"
+#include "ngbe_eeprom.h"
+#include "ngbe_mng.h"
 #include "ngbe_hw.h"
 
 /**
@@ -25,6 +27,77 @@ void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw)
 	bus->func = bus->lan_id;
 }
 
+/**
+ *  ngbe_acquire_swfw_sync - Acquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to acquire
+ *
+ *  Acquires the SWFW semaphore through the MNGSEM register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask)
+{
+	u32 mngsem = 0;
+	u32 swmask = NGBE_MNGSEM_SW(mask);
+	u32 fwmask = NGBE_MNGSEM_FW(mask);
+	u32 timeout = 200;
+	u32 i;
+
+	DEBUGFUNC("ngbe_acquire_swfw_sync");
+
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * SW NVM semaphore bit is used for access to all
+		 * SW_FW_SYNC bits (not just NVM)
+		 */
+		if (ngbe_get_eeprom_semaphore(hw))
+			return NGBE_ERR_SWFW_SYNC;
+
+		mngsem = rd32(hw, NGBE_MNGSEM);
+		if (mngsem & (fwmask | swmask)) {
+			/* Resource is currently in use by FW or SW */
+			ngbe_release_eeprom_semaphore(hw);
+			msec_delay(5);
+		} else {
+			mngsem |= swmask;
+			wr32(hw, NGBE_MNGSEM, mngsem);
+			ngbe_release_eeprom_semaphore(hw);
+			return 0;
+		}
+	}
+
+	/* If time expired clear the bits holding the lock and retry */
+	if (mngsem & (fwmask | swmask))
+		ngbe_release_swfw_sync(hw, mngsem & (fwmask | swmask));
+
+	msec_delay(5);
+	return NGBE_ERR_SWFW_SYNC;
+}
+
+/**
+ *  ngbe_release_swfw_sync - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to release
+ *
+ *  Releases the SWFW semaphore through the MNGSEM register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask)
+{
+	u32 mngsem;
+	u32 swmask = mask;
+
+	DEBUGFUNC("ngbe_release_swfw_sync");
+
+	ngbe_get_eeprom_semaphore(hw);
+
+	mngsem = rd32(hw, NGBE_MNGSEM);
+	mngsem &= ~swmask;
+	wr32(hw, NGBE_MNGSEM, mngsem);
+
+	ngbe_release_eeprom_semaphore(hw);
+}
+
 /**
  *  ngbe_set_mac_type - Sets MAC type
  *  @hw: pointer to the HW structure
@@ -134,12 +207,22 @@ void ngbe_map_device_id(struct ngbe_hw *hw)
 s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
 {
 	struct ngbe_bus_info *bus = &hw->bus;
+	struct ngbe_mac_info *mac = &hw->mac;
+	struct ngbe_rom_info *rom = &hw->rom;
 
 	DEBUGFUNC("ngbe_init_ops_pf");
 
 	/* BUS */
 	bus->set_lan_id = ngbe_set_lan_id_multi_port;
 
+	/* MAC */
+	mac->acquire_swfw_sync = ngbe_acquire_swfw_sync;
+	mac->release_swfw_sync = ngbe_release_swfw_sync;
+
+	/* EEPROM */
+	rom->init_params = ngbe_init_eeprom_params;
+	rom->validate_checksum = ngbe_validate_eeprom_checksum_em;
+
 	return 0;
 }
 
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index 7d5de49248..5e508fb67f 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -10,6 +10,9 @@
 
 void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw);
 
+s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask);
+void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask);
+
 s32 ngbe_init_shared_code(struct ngbe_hw *hw);
 s32 ngbe_set_mac_type(struct ngbe_hw *hw);
 s32 ngbe_init_ops_pf(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_mng.c b/drivers/net/ngbe/base/ngbe_mng.c
new file mode 100644
index 0000000000..87891a91e1
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_mng.c
@@ -0,0 +1,198 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#include "ngbe_type.h"
+#include "ngbe_mng.h"
+
+/**
+ *  ngbe_hic_unlocked - Issue command to manageability block unlocked
+ *  @hw: pointer to the HW structure
+ *  @buffer: command to write and where the return status will be placed
+ *  @length: length of buffer, must be multiple of 4 bytes
+ *  @timeout: time in ms to wait for command completion
+ *
+ *  Communicates with the manageability block. On success return 0
+ *  else returns semaphore error when encountering an error acquiring
+ *  semaphore or NGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ *
+ *  This function assumes that the NGBE_MNGSEM_SWMBX semaphore is held
+ *  by the caller.
+ **/
+static s32
+ngbe_hic_unlocked(struct ngbe_hw *hw, u32 *buffer, u32 length, u32 timeout)
+{
+	u32 value, loop;
+	u16 i, dword_len;
+
+	DEBUGFUNC("ngbe_hic_unlocked");
+
+	if (!length || length > NGBE_PMMBX_BSIZE) {
+		DEBUGOUT("Buffer length failure buffersize=%d.\n", length);
+		return NGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Calculate length in DWORDs. We must be DWORD aligned */
+	if (length % sizeof(u32)) {
+		DEBUGOUT("Buffer length failure, not aligned to dword");
+		return NGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	dword_len = length >> 2;
+
+	/* The device driver writes the relevant command block
+	 * into the ram area.
+	 */
+	for (i = 0; i < dword_len; i++) {
+		wr32a(hw, NGBE_MNGMBX, i, cpu_to_le32(buffer[i]));
+		buffer[i] = rd32a(hw, NGBE_MNGMBX, i);
+	}
+	ngbe_flush(hw);
+
+	/* Setting this bit tells the ARC that a new command is pending. */
+	wr32m(hw, NGBE_MNGMBXCTL,
+	      NGBE_MNGMBXCTL_SWRDY, NGBE_MNGMBXCTL_SWRDY);
+
+	/* Check command completion */
+	loop = po32m(hw, NGBE_MNGMBXCTL,
+		NGBE_MNGMBXCTL_FWRDY, NGBE_MNGMBXCTL_FWRDY,
+		&value, timeout, 1000);
+	if (!loop || !(value & NGBE_MNGMBXCTL_FWACK)) {
+		DEBUGOUT("Command has failed with no status valid.\n");
+		return NGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	return 0;
+}
+
+/**
+ *  ngbe_host_interface_command - Issue command to manageability block
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains the command to write and where the return status will
+ *   be placed
+ *  @length: length of buffer, must be multiple of 4 bytes
+ *  @timeout: time in ms to wait for command completion
+ *  @return_data: read and return data from the buffer (true) or not (false)
+ *   Needed because FW structures are big endian and decoding of
+ *   these fields can be 8 bit or 16 bit based on command. Decoding
+ *   is not easily understood without making a table of commands.
+ *   So we will leave this up to the caller to read back the data
+ *   in these cases.
+ *
+ *  Communicates with the manageability block. On success return 0
+ *  else returns semaphore error when encountering an error acquiring
+ *  semaphore or NGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+static s32
+ngbe_host_interface_command(struct ngbe_hw *hw, u32 *buffer,
+				 u32 length, u32 timeout, bool return_data)
+{
+	u32 hdr_size = sizeof(struct ngbe_hic_hdr);
+	struct ngbe_hic_hdr *resp = (struct ngbe_hic_hdr *)buffer;
+	u16 buf_len;
+	s32 err;
+	u32 bi;
+	u32 dword_len;
+
+	DEBUGFUNC("ngbe_host_interface_command");
+
+	if (length == 0 || length > NGBE_PMMBX_BSIZE) {
+		DEBUGOUT("Buffer length failure buffersize=%d.\n", length);
+		return NGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Take management host interface semaphore */
+	err = hw->mac.acquire_swfw_sync(hw, NGBE_MNGSEM_SWMBX);
+	if (err)
+		return err;
+
+	err = ngbe_hic_unlocked(hw, buffer, length, timeout);
+	if (err)
+		goto rel_out;
+
+	if (!return_data)
+		goto rel_out;
+
+	/* Calculate length in DWORDs */
+	dword_len = hdr_size >> 2;
+
+	/* first pull in the header so we know the buffer length */
+	for (bi = 0; bi < dword_len; bi++)
+		buffer[bi] = rd32a(hw, NGBE_MNGMBX, bi);
+
+	/*
+	 * If there is any thing in data position pull it in
+	 * Read Flash command requires reading buffer length from
+	 * two byes instead of one byte
+	 */
+	if (resp->cmd == 0x30) {
+		for (; bi < dword_len + 2; bi++)
+			buffer[bi] = rd32a(hw, NGBE_MNGMBX, bi);
+
+		buf_len = (((u16)(resp->cmd_or_resp.ret_status) << 3)
+				  & 0xF00) | resp->buf_len;
+		hdr_size += (2 << 2);
+	} else {
+		buf_len = resp->buf_len;
+	}
+	if (!buf_len)
+		goto rel_out;
+
+	if (length < buf_len + hdr_size) {
+		DEBUGOUT("Buffer not large enough for reply message.\n");
+		err = NGBE_ERR_HOST_INTERFACE_COMMAND;
+		goto rel_out;
+	}
+
+	/* Calculate length in DWORDs, add 3 for odd lengths */
+	dword_len = (buf_len + 3) >> 2;
+
+	/* Pull in the rest of the buffer (bi is where we left off) */
+	for (; bi <= dword_len; bi++)
+		buffer[bi] = rd32a(hw, NGBE_MNGMBX, bi);
+
+rel_out:
+	hw->mac.release_swfw_sync(hw, NGBE_MNGSEM_SWMBX);
+
+	return err;
+}
+
+s32 ngbe_hic_check_cap(struct ngbe_hw *hw)
+{
+	struct ngbe_hic_read_shadow_ram command;
+	s32 err;
+	int i;
+
+	DEBUGFUNC("\n");
+
+	command.hdr.req.cmd = FW_EEPROM_CHECK_STATUS;
+	command.hdr.req.buf_lenh = 0;
+	command.hdr.req.buf_lenl = 0;
+	command.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* convert offset from words to bytes */
+	command.address = 0;
+	/* one word */
+	command.length = 0;
+
+	for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+		err = ngbe_host_interface_command(hw, (u32 *)&command,
+				sizeof(command),
+				NGBE_HI_COMMAND_TIMEOUT, true);
+		if (err)
+			continue;
+
+		command.hdr.rsp.ret_status &= 0x1F;
+		if (command.hdr.rsp.ret_status !=
+			FW_CEM_RESP_STATUS_SUCCESS)
+			err = NGBE_ERR_HOST_INTERFACE_COMMAND;
+
+		break;
+	}
+
+	if (!err && command.address != FW_CHECKSUM_CAP_ST_PASS)
+		err = NGBE_ERR_EEPROM_CHECKSUM;
+
+	return err;
+}
diff --git a/drivers/net/ngbe/base/ngbe_mng.h b/drivers/net/ngbe/base/ngbe_mng.h
new file mode 100644
index 0000000000..383e0dc0d1
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_mng.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_MNG_H_
+#define _NGBE_MNG_H_
+
+#include "ngbe_type.h"
+
+#define NGBE_PMMBX_QSIZE       64 /* Num of dwords in range */
+#define NGBE_PMMBX_BSIZE       (NGBE_PMMBX_QSIZE * 4)
+#define NGBE_HI_COMMAND_TIMEOUT        5000 /* Process HI command limit */
+
+/* CEM Support */
+#define FW_CEM_MAX_RETRIES              3
+#define FW_CEM_RESP_STATUS_SUCCESS      0x1
+#define FW_DEFAULT_CHECKSUM             0xFF /* checksum always 0xFF */
+#define FW_EEPROM_CHECK_STATUS		0xE9
+
+#define FW_CHECKSUM_CAP_ST_PASS	0x80658383
+#define FW_CHECKSUM_CAP_ST_FAIL	0x70657376
+
+/* Host Interface Command Structures */
+struct ngbe_hic_hdr {
+	u8 cmd;
+	u8 buf_len;
+	union {
+		u8 cmd_resv;
+		u8 ret_status;
+	} cmd_or_resp;
+	u8 checksum;
+};
+
+struct ngbe_hic_hdr2_req {
+	u8 cmd;
+	u8 buf_lenh;
+	u8 buf_lenl;
+	u8 checksum;
+};
+
+struct ngbe_hic_hdr2_rsp {
+	u8 cmd;
+	u8 buf_lenl;
+	u8 ret_status;     /* 7-5: high bits of buf_len, 4-0: status */
+	u8 checksum;
+};
+
+union ngbe_hic_hdr2 {
+	struct ngbe_hic_hdr2_req req;
+	struct ngbe_hic_hdr2_rsp rsp;
+};
+
+/* These need to be dword aligned */
+struct ngbe_hic_read_shadow_ram {
+	union ngbe_hic_hdr2 hdr;
+	u32 address;
+	u16 length;
+	u16 pad2;
+	u16 data;
+	u16 pad3;
+};
+
+s32 ngbe_hic_check_cap(struct ngbe_hw *hw);
+#endif /* _NGBE_MNG_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 15f1778d6a..28b15cfb5a 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -12,6 +12,13 @@
 #include "ngbe_osdep.h"
 #include "ngbe_devids.h"
 
+enum ngbe_eeprom_type {
+	ngbe_eeprom_unknown = 0,
+	ngbe_eeprom_spi,
+	ngbe_eeprom_flash,
+	ngbe_eeprom_none /* No NVM support */
+};
+
 enum ngbe_mac_type {
 	ngbe_mac_unknown = 0,
 	ngbe_mac_em,
@@ -51,7 +58,23 @@ struct ngbe_bus_info {
 	u8 lan_id;
 };
 
+struct ngbe_rom_info {
+	s32 (*init_params)(struct ngbe_hw *hw);
+	s32 (*validate_checksum)(struct ngbe_hw *hw, u16 *checksum_val);
+
+	enum ngbe_eeprom_type type;
+	u32 semaphore_delay;
+	u16 word_size;
+	u16 address_bits;
+	u16 word_page_size;
+	u32 sw_addr;
+	u32 saved_version;
+	u16 cksum_devcap;
+};
+
 struct ngbe_mac_info {
+	s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask);
+	void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask);
 	enum ngbe_mac_type type;
 };
 
@@ -65,6 +88,7 @@ struct ngbe_hw {
 	void *back;
 	struct ngbe_mac_info mac;
 	struct ngbe_phy_info phy;
+	struct ngbe_rom_info rom;
 	struct ngbe_bus_info bus;
 	u16 device_id;
 	u16 vendor_id;
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 12b80ec695..c2f92a8437 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -31,6 +31,29 @@ static const struct rte_pci_id pci_id_ngbe_map[] = {
 	{ .vendor_id = 0, /* sentinel */ },
 };
 
+/*
+ * Ensure that all locks are released before first NVM or PHY access
+ */
+static void
+ngbe_swfw_lock_reset(struct ngbe_hw *hw)
+{
+	uint16_t mask;
+
+	/*
+	 * These ones are more tricky since they are common to all ports; but
+	 * swfw_sync retries last long enough (1s) to be almost sure that if
+	 * lock can not be taken it is due to an improper lock of the
+	 * semaphore.
+	 */
+	mask = NGBE_MNGSEM_SWPHY |
+	       NGBE_MNGSEM_SWMBX |
+	       NGBE_MNGSEM_SWFLASH;
+	if (hw->mac.acquire_swfw_sync(hw, mask) < 0)
+		PMD_DRV_LOG(DEBUG, "SWFW common locks released");
+
+	hw->mac.release_swfw_sync(hw, mask);
+}
+
 static int
 eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 {
@@ -70,6 +93,22 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 		return -EIO;
 	}
 
+	/* Unlock any pending hardware semaphore */
+	ngbe_swfw_lock_reset(hw);
+
+	err = hw->rom.init_params(hw);
+	if (err != 0) {
+		PMD_INIT_LOG(ERR, "The EEPROM init failed: %d", err);
+		return -EIO;
+	}
+
+	/* Make sure we have a good EEPROM before we read from it */
+	err = hw->rom.validate_checksum(hw, NULL);
+	if (err != 0) {
+		PMD_INIT_LOG(ERR, "The EEPROM checksum is not valid: %d", err);
+		return -EIO;
+	}
+
 	return 0;
 }
 
-- 
2.27.0




  parent reply	other threads:[~2021-06-02  9:40 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-02  9:40 [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 01/24] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-06-14 17:05   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 02/24] net/ngbe: add device IDs Jiawen Wu
2021-06-14 17:08   ` Andrew Rybchenko
2021-06-15  2:52     ` Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 03/24] net/ngbe: support probe and remove Jiawen Wu
2021-06-14 17:27   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 04/24] net/ngbe: add device init and uninit Jiawen Wu
2021-06-14 17:36   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 05/24] net/ngbe: add log type and error type Jiawen Wu
2021-06-14 17:54   ` Andrew Rybchenko
2021-06-15  7:13     ` Jiawen Wu
2021-07-01 13:57   ` David Marchand
2021-07-02  2:08     ` Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 06/24] net/ngbe: define registers Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 07/24] net/ngbe: set MAC type and LAN id Jiawen Wu
2021-06-02  9:40 ` Jiawen Wu [this message]
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 09/24] net/ngbe: add HW initialization Jiawen Wu
2021-06-14 18:01   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 10/24] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 11/24] net/ngbe: store MAC address Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 12/24] net/ngbe: add info get operation Jiawen Wu
2021-06-14 18:13   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 13/24] net/ngbe: support link update Jiawen Wu
2021-06-14 18:45   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 14/24] net/ngbe: setup the check PHY link Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 15/24] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-06-14 18:53   ` Andrew Rybchenko
2021-06-15  7:50     ` Jiawen Wu
2021-06-15  8:06       ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 16/24] net/ngbe: add Tx " Jiawen Wu
2021-06-14 18:59   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 17/24] net/ngbe: add Rx and Tx init Jiawen Wu
2021-06-14 19:01   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 18/24] net/ngbe: add packet type Jiawen Wu
2021-06-14 19:06   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 19/24] net/ngbe: add simple Rx and Tx flow Jiawen Wu
2021-06-14 19:10   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 20/24] net/ngbe: support bulk and scatter Rx Jiawen Wu
2021-06-14 19:17   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 21/24] net/ngbe: support full-featured Tx path Jiawen Wu
2021-06-14 19:22   ` Andrew Rybchenko
2021-06-14 19:23     ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 22/24] net/ngbe: add device start operation Jiawen Wu
2021-06-14 19:33   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 23/24] net/ngbe: start and stop RxTx Jiawen Wu
2021-06-14 20:44   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 24/24] net/ngbe: add device stop operation Jiawen Wu
2021-06-11  1:38 ` [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-14 20:56 ` Andrew Rybchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210602094108.1575640-9-jiawenwu@trustnetic.com \
    --to=jiawenwu@trustnetic.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).