From: Kalesh A P <kalesh-anakkur.purayil@broadcom.com>
To: dev@dpdk.org
Cc: ajit.khaparde@broadcom.com
Subject: [dpdk-dev] [PATCH 2/4] net/bnxt: inform firmware about host MTU
Date: Mon, 12 Jul 2021 13:34:33 +0530 [thread overview]
Message-ID: <20210712080435.9149-3-kalesh-anakkur.purayil@broadcom.com> (raw)
In-Reply-To: <20210712080435.9149-1-kalesh-anakkur.purayil@broadcom.com>
From: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
This enables device firmware to respond appropriately to BMC queries
about the driver's configured MTU.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 3 +++
drivers/net/bnxt/bnxt_hwrm.c | 24 ++++++++++++++++++++++++
drivers/net/bnxt/bnxt_hwrm.h | 1 +
3 files changed, 28 insertions(+)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index ed09f1b..7147f17 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -3067,6 +3067,9 @@ int bnxt_mtu_set_op(struct rte_eth_dev *eth_dev, uint16_t new_mtu)
if (!rc)
eth_dev->data->dev_conf.rxmode.max_rx_pkt_len = new_pkt_size;
+ if (bnxt_hwrm_config_host_mtu(bp))
+ PMD_DRV_LOG(WARNING, "Failed to configure host MTU\n");
+
PMD_DRV_LOG(INFO, "New MTU is %d\n", new_mtu);
return rc;
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 0568476..d583839 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -3469,6 +3469,7 @@ static int bnxt_hwrm_pf_func_cfg(struct bnxt *bp,
int rc;
enables = HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_MTU |
+ HWRM_FUNC_CFG_INPUT_ENABLES_HOST_MTU |
HWRM_FUNC_CFG_INPUT_ENABLES_MRU |
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS |
HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS |
@@ -3489,6 +3490,7 @@ static int bnxt_hwrm_pf_func_cfg(struct bnxt *bp,
req.flags = rte_cpu_to_le_32(bp->pf->func_cfg_flags);
req.admin_mtu = rte_cpu_to_le_16(BNXT_MAX_MTU);
+ req.host_mtu = rte_cpu_to_le_16(bp->eth_dev->data->mtu);
req.mru = rte_cpu_to_le_16(BNXT_VNIC_MRU(bp->eth_dev->data->mtu));
req.num_rsscos_ctxs = rte_cpu_to_le_16(pf_resc->num_rsscos_ctxs);
req.num_stat_ctxs = rte_cpu_to_le_16(pf_resc->num_stat_ctxs);
@@ -6203,3 +6205,25 @@ void bnxt_free_hwrm_tx_ring(struct bnxt *bp, int queue_index)
bnxt_free_cp_ring(bp, cpr);
}
+
+int bnxt_hwrm_config_host_mtu(struct bnxt *bp)
+{
+ struct hwrm_func_cfg_input req = {0};
+ struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ int rc;
+
+ if (!BNXT_PF(bp))
+ return 0;
+
+ HWRM_PREP(&req, HWRM_FUNC_CFG, BNXT_USE_CHIMP_MB);
+
+ req.fid = rte_cpu_to_le_16(0xffff);
+ req.enables = rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_HOST_MTU);
+ req.host_mtu = rte_cpu_to_le_16(bp->eth_dev->data->mtu);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req), BNXT_USE_CHIMP_MB);
+ HWRM_CHECK_RESULT();
+ HWRM_UNLOCK();
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index ec3414f..80e3128 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -307,4 +307,5 @@ int bnxt_hwrm_read_sfp_module_eeprom_info(struct bnxt *bp, uint16_t i2c_addr,
int bnxt_hwrm_stat_ctx_alloc(struct bnxt *bp, struct bnxt_cp_ring_info *cpr);
void bnxt_free_hwrm_tx_ring(struct bnxt *bp, int queue_index);
int bnxt_alloc_hwrm_tx_ring(struct bnxt *bp, int queue_index);
+int bnxt_hwrm_config_host_mtu(struct bnxt *bp);
#endif
--
2.10.1
next prev parent reply other threads:[~2021-07-12 7:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-12 8:04 [dpdk-dev] [PATCH 0/4] bnxt PMD patches Kalesh A P
2021-07-12 8:04 ` [dpdk-dev] [PATCH 1/4] net/bnxt: update HSI structure Kalesh A P
2021-07-12 8:04 ` Kalesh A P [this message]
2021-07-12 8:04 ` [dpdk-dev] [PATCH 3/4] net/bnxt: minor refactoring of async handling code Kalesh A P
2021-07-12 8:04 ` [dpdk-dev] [PATCH 4/4] net/bnxt: add handler for pause storm event Kalesh A P
2021-07-15 0:29 ` [dpdk-dev] [PATCH 0/4] bnxt PMD patches Ajit Khaparde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210712080435.9149-3-kalesh-anakkur.purayil@broadcom.com \
--to=kalesh-anakkur.purayil@broadcom.com \
--cc=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).