From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id A628EA0C56; Wed, 8 Sep 2021 12:40:40 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 55584411C3; Wed, 8 Sep 2021 12:40:21 +0200 (CEST) Received: from mga11.intel.com (mga11.intel.com [192.55.52.93]) by mails.dpdk.org (Postfix) with ESMTP id 71CA5406B4 for ; Wed, 8 Sep 2021 12:40:16 +0200 (CEST) X-IronPort-AV: E=McAfee;i="6200,9189,10100"; a="217284602" X-IronPort-AV: E=Sophos;i="5.85,277,1624345200"; d="scan'208";a="217284602" Received: from fmsmga004.fm.intel.com ([10.253.24.48]) by fmsmga102.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 08 Sep 2021 03:40:16 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.85,277,1624345200"; d="scan'208";a="524780018" Received: from silpixa00401160.ir.intel.com ([10.55.128.248]) by fmsmga004.fm.intel.com with ESMTP; 08 Sep 2021 03:40:14 -0700 From: Conor Walsh To: bruce.richardson@intel.com, fengchengwen@huawei.com, jerinj@marvell.com, kevin.laatz@intel.com Cc: dev@dpdk.org, Conor Walsh Date: Wed, 8 Sep 2021 10:39:58 +0000 Message-Id: <20210908104004.3218016-6-conor.walsh@intel.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20210908104004.3218016-1-conor.walsh@intel.com> References: <20210903111734.2734545-1-conor.walsh@intel.com> <20210908104004.3218016-1-conor.walsh@intel.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Subject: [dpdk-dev] [PATCH v3 05/11] dma/ioat: add start and stop functions X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Add start, stop and recover functions for IOAT devices. Signed-off-by: Conor Walsh Signed-off-by: Bruce Richardson Reviewed-by: Kevin Laatz --- doc/guides/dmadevs/ioat.rst | 3 ++ drivers/dma/ioat/ioat_dmadev.c | 92 ++++++++++++++++++++++++++++++++++ 2 files changed, 95 insertions(+) diff --git a/doc/guides/dmadevs/ioat.rst b/doc/guides/dmadevs/ioat.rst index b6d88fe966..f7742642b5 100644 --- a/doc/guides/dmadevs/ioat.rst +++ b/doc/guides/dmadevs/ioat.rst @@ -86,3 +86,6 @@ The following code shows how the device is configured in ``test_dmadev.c``: :start-after: Setup of the dmadev device. 8< :end-before: >8 End of setup of the dmadev device. :dedent: 1 + +Once configured, the device can then be made ready for use by calling the +``rte_dmadev_start()`` API. diff --git a/drivers/dma/ioat/ioat_dmadev.c b/drivers/dma/ioat/ioat_dmadev.c index e23cbb2068..76ef977e93 100644 --- a/drivers/dma/ioat/ioat_dmadev.c +++ b/drivers/dma/ioat/ioat_dmadev.c @@ -81,6 +81,96 @@ ioat_vchan_setup(struct rte_dmadev *dev, uint16_t vchan __rte_unused, return 0; } +/* Recover IOAT device. */ +static inline int +__ioat_recover(struct ioat_dmadev *ioat) +{ + uint32_t chanerr, retry = 0; + uint16_t mask = ioat->qcfg.nb_desc - 1; + + /* Clear any channel errors. Reading and writing to chanerr does this. */ + chanerr = ioat->regs->chanerr; + ioat->regs->chanerr = chanerr; + + /* Reset Channel. */ + ioat->regs->chancmd = IOAT_CHANCMD_RESET; + + /* Write new chain address to trigger state change. */ + ioat->regs->chainaddr = ioat->desc_ring[(ioat->next_read - 1) & mask].next; + /* Ensure channel control and status addr are correct. */ + ioat->regs->chanctrl = IOAT_CHANCTRL_ANY_ERR_ABORT_EN | + IOAT_CHANCTRL_ERR_COMPLETION_EN; + ioat->regs->chancmp = ioat->status_addr; + + /* Allow HW time to move to the ARMED state. */ + do { + rte_pause(); + retry++; + } while (ioat->regs->chansts != IOAT_CHANSTS_ARMED && retry < 200); + + /* Exit as failure if device is still HALTED. */ + if (ioat->regs->chansts != IOAT_CHANSTS_ARMED) + return -1; + + /* Store next write as offset as recover will move HW and SW ring out of sync. */ + ioat->offset = ioat->next_read; + + /* Prime status register with previous address. */ + ioat->status = ioat->desc_ring[(ioat->next_read - 2) & mask].next; + + return 0; +} + +/* Start a configured device. */ +static int +ioat_dev_start(struct rte_dmadev *dev) +{ + struct ioat_dmadev *ioat = dev->dev_private; + + if (ioat->qcfg.nb_desc == 0 || ioat->desc_ring == NULL) + return -EBUSY; + + /* Inform hardware of where the descriptor ring is. */ + ioat->regs->chainaddr = ioat->ring_addr; + /* Inform hardware of where to write the status/completions. */ + ioat->regs->chancmp = ioat->status_addr; + + /* Prime the status register to be set to the last element. */ + ioat->status = ioat->ring_addr + ((ioat->qcfg.nb_desc - 1) * DESC_SZ); + + printf("IOAT.status: %s [%#lx]\n", + chansts_readable[ioat->status & IOAT_CHANSTS_STATUS], + ioat->status); + + if ((ioat->regs->chansts & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_HALTED) { + IOAT_PMD_WARN("Device HALTED on start, attempting to recover\n"); + if (__ioat_recover(ioat) != 0) { + IOAT_PMD_ERR("Device couldn't be recovered"); + return -1; + } + } + + return 0; +} + +/* Stop a configured device. */ +static int +ioat_dev_stop(struct rte_dmadev *dev) +{ + struct ioat_dmadev *ioat = dev->dev_private; + uint32_t retry = 0; + + ioat->regs->chancmd = IOAT_CHANCMD_SUSPEND; + + do { + rte_pause(); + retry++; + } while ((ioat->regs->chansts & IOAT_CHANSTS_STATUS) != IOAT_CHANSTS_SUSPENDED + && retry < 200); + + return ((ioat->regs->chansts & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_SUSPENDED) ? 0 : -1; +} + /* Get device information of a device. */ static int ioat_dev_info_get(const struct rte_dmadev *dev, struct rte_dmadev_info *info, uint32_t size) @@ -173,6 +263,8 @@ ioat_dmadev_create(const char *name, struct rte_pci_device *dev) .dev_configure = ioat_dev_configure, .dev_dump = ioat_dev_dump, .dev_info_get = ioat_dev_info_get, + .dev_start = ioat_dev_start, + .dev_stop = ioat_dev_stop, .vchan_setup = ioat_vchan_setup, }; -- 2.25.1