From: "Min Hu (Connor)" <humin29@huawei.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>, <thomas@monjalon.net>
Subject: [dpdk-dev] [PATCH 1/2] net/hns3: fix residual old MAC after setting default MAC
Date: Wed, 22 Sep 2021 11:41:51 +0800 [thread overview]
Message-ID: <20210922034152.50196-2-humin29@huawei.com> (raw)
In-Reply-To: <20210922034152.50196-1-humin29@huawei.com>
From: Huisong Li <lihuisong@huawei.com>
This problem occurs in the following scenarios:
1) reset is encountered when the adapter is running.
2) set a new default MAC address
After the above two steps, the old default MAC address should be not take
effect. But the current behavior is contrary to that. This is due to the
change of the "default_addr_setted" in hw->mac from 'true' to 'false' after
the reset. As a result, the old MAC address is not removed when the new
default MAC address is set. This variable controls whether to delete the
old default MAC address when setting the default MAC address. It is only
used when the mac_addr_set API is called for the first time. In fact, when
a unicast MAC address is deleted, if the address isn't in the MAC address
table, the driver doesn't return failure. So this patch remove the
redundant and troublesome variables to resolve this problem.
Fixes: 7d7f9f80bbfb ("net/hns3: support MAC address related operations")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
---
drivers/net/hns3/hns3_ethdev.c | 38 ++++++++++------------------------
drivers/net/hns3/hns3_ethdev.h | 1 -
2 files changed, 11 insertions(+), 28 deletions(-)
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 7d37004972..5c8ac5754f 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -1651,7 +1651,7 @@ hns3_remove_mc_addr_common(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
static int
hns3_add_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
- uint32_t idx, __rte_unused uint32_t pool)
+ __rte_unused uint32_t idx, __rte_unused uint32_t pool)
{
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
@@ -1682,8 +1682,6 @@ hns3_add_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
return ret;
}
- if (idx == 0)
- hw->mac.default_addr_setted = true;
rte_spinlock_unlock(&hw->lock);
return ret;
@@ -1748,30 +1746,19 @@ hns3_set_default_mac_addr(struct rte_eth_dev *dev,
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct rte_ether_addr *oaddr;
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
- bool default_addr_setted;
int ret, ret_val;
- /*
- * It has been guaranteed that input parameter named mac_addr is valid
- * address in the rte layer of DPDK framework.
- */
- oaddr = (struct rte_ether_addr *)hw->mac.mac_addr;
- default_addr_setted = hw->mac.default_addr_setted;
- if (default_addr_setted && !!rte_is_same_ether_addr(mac_addr, oaddr))
- return 0;
-
rte_spinlock_lock(&hw->lock);
- if (default_addr_setted) {
- ret = hns3_remove_uc_addr_common(hw, oaddr);
- if (ret) {
- hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
- oaddr);
- hns3_warn(hw, "Remove old uc mac address(%s) fail: %d",
- mac_str, ret);
+ oaddr = (struct rte_ether_addr *)hw->mac.mac_addr;
+ ret = hns3_remove_uc_addr_common(hw, oaddr);
+ if (ret) {
+ hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
+ oaddr);
+ hns3_warn(hw, "Remove old uc mac address(%s) fail: %d",
+ mac_str, ret);
- rte_spinlock_unlock(&hw->lock);
- return ret;
- }
+ rte_spinlock_unlock(&hw->lock);
+ return ret;
}
ret = hns3_add_uc_addr_common(hw, mac_addr);
@@ -1790,7 +1777,6 @@ hns3_set_default_mac_addr(struct rte_eth_dev *dev,
rte_ether_addr_copy(mac_addr,
(struct rte_ether_addr *)hw->mac.mac_addr);
- hw->mac.default_addr_setted = true;
rte_spinlock_unlock(&hw->lock);
return 0;
@@ -1811,7 +1797,6 @@ hns3_set_default_mac_addr(struct rte_eth_dev *dev,
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE, oaddr);
hns3_warn(hw, "Failed to restore old uc mac addr(%s): %d",
mac_str, ret_val);
- hw->mac.default_addr_setted = false;
}
rte_spinlock_unlock(&hw->lock);
@@ -3473,7 +3458,6 @@ hns3_get_board_configuration(struct hns3_hw *hw)
hw->rss_dis_flag = false;
memcpy(hw->mac.mac_addr, cfg.mac_addr, RTE_ETHER_ADDR_LEN);
hw->mac.phy_addr = cfg.phy_addr;
- hw->mac.default_addr_setted = false;
hw->num_tx_desc = cfg.tqp_desc_num;
hw->num_rx_desc = cfg.tqp_desc_num;
hw->dcb_info.num_pg = 1;
@@ -5931,7 +5915,7 @@ hns3_do_stop(struct hns3_adapter *hns)
return ret;
}
}
- hw->mac.default_addr_setted = false;
+
return 0;
}
diff --git a/drivers/net/hns3/hns3_ethdev.h b/drivers/net/hns3/hns3_ethdev.h
index 0e4e4269a1..243a4046ae 100644
--- a/drivers/net/hns3/hns3_ethdev.h
+++ b/drivers/net/hns3/hns3_ethdev.h
@@ -188,7 +188,6 @@ enum hns3_media_type {
struct hns3_mac {
uint8_t mac_addr[RTE_ETHER_ADDR_LEN];
- bool default_addr_setted; /* whether default addr(mac_addr) is set */
uint8_t media_type;
uint8_t phy_addr;
uint8_t link_duplex : 1; /* ETH_LINK_[HALF/FULL]_DUPLEX */
--
2.33.0
next prev parent reply other threads:[~2021-09-22 3:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-22 3:41 [dpdk-dev] [PATCH 0/2] Bugfix for hns3 MAC Min Hu (Connor)
2021-09-22 3:41 ` Min Hu (Connor) [this message]
2021-09-22 3:41 ` [dpdk-dev] [PATCH 2/2] net/hns3: fix input parameters of MAC related functions Min Hu (Connor)
2021-10-07 11:59 ` [dpdk-dev] [PATCH 0/2] Bugfix for hns3 MAC Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210922034152.50196-2-humin29@huawei.com \
--to=humin29@huawei.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).