DPDK patches and discussions
 help / color / mirror / Atom feed
From: Alvin Zhang <alvinx.zhang@intel.com>
To: qi.z.zhang@intel.com
Cc: dev@dpdk.org, Alvin Zhang <alvinx.zhang@intel.com>
Subject: [dpdk-dev] [PATCH v5] net/ice: add support for low Rx latency
Date: Fri, 24 Sep 2021 17:34:29 +0800	[thread overview]
Message-ID: <20210924093429.12068-1-alvinx.zhang@intel.com> (raw)
In-Reply-To: <20210924091843.14880-1-alvinx.zhang@intel.com>

This patch adds a devarg parameter to enable/disable low Rx latency.

Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
---

v3: rebase to dpdk-next-net-intel
v4: rename arg rx-low-latency to rx_low_latency
v5: rename macro ICE_RX_LOW_LATENCY to ICE_RX_LOW_LATENCY_ARG
---
 doc/guides/nics/ice.rst      | 12 ++++++++++++
 drivers/net/ice/ice_ethdev.c | 26 +++++++++++++++++++++++---
 drivers/net/ice/ice_ethdev.h |  1 +
 3 files changed, 36 insertions(+), 3 deletions(-)

diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst
index ebe2cbc..8d43488 100644
--- a/doc/guides/nics/ice.rst
+++ b/doc/guides/nics/ice.rst
@@ -227,6 +227,18 @@ Runtime Config Options
 
     -a af:00.0,pps_out='[pin:0]'
 
+- ``Low Rx latency`` (default ``0``)
+
+  vRAN workloads require low latency DPDK interface for the front haul
+  interface connection to Radio. By specifying ``1`` for parameter
+  ``rx_low_latency``, each completed Rx descriptor can be written immediately
+  to host memory and the Rx interrupt latency can be reduced to 2us::
+
+    -a 0000:88:00.0,rx_low_latency=1
+
+  As a trade-off, this configuration may cause the packet processing performance
+  degradation due to the PCI bandwidth limitation.
+
 Driver compilation and testing
 ------------------------------
 
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index e24a3b6..a1d28c3 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -30,6 +30,7 @@
 #define ICE_PROTO_XTR_ARG         "proto_xtr"
 #define ICE_HW_DEBUG_MASK_ARG     "hw_debug_mask"
 #define ICE_ONE_PPS_OUT_ARG       "pps_out"
+#define ICE_RX_LOW_LATENCY_ARG    "rx_low_latency"
 
 static const char * const ice_valid_args[] = {
 	ICE_SAFE_MODE_SUPPORT_ARG,
@@ -37,6 +38,7 @@
 	ICE_PROTO_XTR_ARG,
 	ICE_HW_DEBUG_MASK_ARG,
 	ICE_ONE_PPS_OUT_ARG,
+	ICE_RX_LOW_LATENCY_ARG,
 	NULL
 };
 
@@ -1956,6 +1958,9 @@ static int ice_parse_devargs(struct rte_eth_dev *dev)
 	if (ret)
 		goto bail;
 
+	ret = rte_kvargs_process(kvlist, ICE_RX_LOW_LATENCY_ARG,
+				 &parse_bool, &ad->devargs.rx_low_latency);
+
 bail:
 	rte_kvargs_free(kvlist);
 	return ret;
@@ -3272,8 +3277,9 @@ static int ice_init_rss(struct ice_pf *pf)
 {
 	struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
 	uint32_t val, val_tx;
-	int i;
+	int rx_low_latency, i;
 
+	rx_low_latency = vsi->adapter->devargs.rx_low_latency;
 	for (i = 0; i < nb_queue; i++) {
 		/*do actual bind*/
 		val = (msix_vect & QINT_RQCTL_MSIX_INDX_M) |
@@ -3283,8 +3289,21 @@ static int ice_init_rss(struct ice_pf *pf)
 
 		PMD_DRV_LOG(INFO, "queue %d is binding to vect %d",
 			    base_queue + i, msix_vect);
+
 		/* set ITR0 value */
-		ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x2);
+		if (rx_low_latency) {
+			/**
+			 * Empirical configuration for optimal real time
+			 * latency reduced interrupt throttling to 2us
+			 */
+			ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x1);
+			ICE_WRITE_REG(hw, QRX_ITR(base_queue + i),
+				      QRX_ITR_NO_EXPR_M);
+		} else {
+			ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x2);
+			ICE_WRITE_REG(hw, QRX_ITR(base_queue + i), 0);
+		}
+
 		ICE_WRITE_REG(hw, QINT_RQCTL(base_queue + i), val);
 		ICE_WRITE_REG(hw, QINT_TQCTL(base_queue + i), val_tx);
 	}
@@ -5497,7 +5516,8 @@ static int ice_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
 			      ICE_HW_DEBUG_MASK_ARG "=0xXXX"
 			      ICE_PROTO_XTR_ARG "=[queue:]<vlan|ipv4|ipv6|ipv6_flow|tcp|ip_offset>"
 			      ICE_SAFE_MODE_SUPPORT_ARG "=<0|1>"
-			      ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>");
+			      ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>"
+			      ICE_RX_LOW_LATENCY_ARG "=<0|1>");
 
 RTE_LOG_REGISTER_SUFFIX(ice_logtype_init, init, NOTICE);
 RTE_LOG_REGISTER_SUFFIX(ice_logtype_driver, driver, NOTICE);
diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
index ea9d892..26f5c56 100644
--- a/drivers/net/ice/ice_ethdev.h
+++ b/drivers/net/ice/ice_ethdev.h
@@ -476,6 +476,7 @@ struct ice_pf {
  * Cache devargs parse result.
  */
 struct ice_devargs {
+	int rx_low_latency;
 	int safe_mode_support;
 	uint8_t proto_xtr_dflt;
 	int pipe_mode_support;
-- 
1.8.3.1


  reply	other threads:[~2021-09-24  9:34 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-14  1:31 [dpdk-dev] [PATCH] net/ice: add ability to reduce the " Alvin Zhang
2021-09-16  3:07 ` Tu, Lijuan
2021-09-16  8:28   ` Zhang, AlvinX
2021-09-17 17:25 ` Kevin Traynor
2021-09-18  1:33   ` Zhang, AlvinX
2021-09-21  9:20     ` Kevin Traynor
2021-09-22  2:16       ` Zhang, AlvinX
2021-09-28  9:22         ` Kevin Traynor
2021-09-18  2:59 ` [dpdk-dev] [PATCH v2] net/ice: add support for low " Alvin Zhang
2021-09-24  8:56   ` [dpdk-dev] [PATCH v3] " Alvin Zhang
2021-09-24  9:10     ` Zhang, Qi Z
2021-09-24  9:18     ` [dpdk-dev] [PATCH v4] " Alvin Zhang
2021-09-24  9:34       ` Alvin Zhang [this message]
2021-09-24 10:53         ` [dpdk-dev] [PATCH v5] " Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210924093429.12068-1-alvinx.zhang@intel.com \
    --to=alvinx.zhang@intel.com \
    --cc=dev@dpdk.org \
    --cc=qi.z.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).