[dpdk-dev] [PATCH 1/3] ethdev: introduce flow pre-configuration hints

[Alexander Kozyrev <akozyrev@nvidia.com>]

The flow rules creation/destruction at a large scale incurs a performance
penalty and may negatively impact the packet processing when used
as part of the datapath logic. This is mainly because software/hardware
resources are allocated and prepared during the flow rule creation.

In order to optimize the insertion rate, PMD may use some hints provided
by the application at the initialization phase. The rte_flow_configure()
function allows to pre-allocate all the needed resources beforehand.
These resources can be used at a later stage without costly allocations.
Every PMD may use only the subset of hints and ignore unused ones.

Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Suggested-by: Ori Kam <orika@nvidia.com>
---
 lib/ethdev/rte_flow.h | 70 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/lib/ethdev/rte_flow.h b/lib/ethdev/rte_flow.h
index 7b1ed7f110..c69d503b90 100644
--- a/lib/ethdev/rte_flow.h
+++ b/lib/ethdev/rte_flow.h
@@ -4288,6 +4288,76 @@ rte_flow_tunnel_item_release(uint16_t port_id,
 			     struct rte_flow_item *items,
 			     uint32_t num_of_items,
 			     struct rte_flow_error *error);
+
+/**
+ * Flow engine configuration.
+ */
+__extension__
+struct rte_flow_port_attr {
+	/**
+	 * Version of the struct layout, should be 0.
+	 */
+	uint32_t version;
+	/**
+	 * Memory size allocated for the flow rules management.
+	 * If set to 0, memory is allocated dynamically.
+	 */
+	uint32_t mem_size;
+	/**
+	 * Number of counter actions pre-configured.
+	 * If set to 0, PMD will allocate counters dynamically.
+	 * @see RTE_FLOW_ACTION_TYPE_COUNT
+	 */
+	uint32_t nb_counters;
+	/**
+	 * Number of aging actions pre-configured.
+	 * If set to 0, PMD will allocate aging dynamically.
+	 * @see RTE_FLOW_ACTION_TYPE_AGE
+	 */
+	uint32_t nb_aging;
+	/**
+	 * Number of traffic metering actions pre-configured.
+	 * If set to 0, PMD will allocate meters dynamically.
+	 * @see RTE_FLOW_ACTION_TYPE_METER
+	 */
+	uint32_t nb_meters;
+	/**
+	 * Resources reallocation strategy.
+	 * If set to 1, PMD is not allowed to allocate more resources on demand.
+	 * An application can only allocate more resources by calling the
+	 * configure API again with new values (may not be supported by PMD).
+	 */
+	uint32_t fixed_resource_size:1;
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Configure flow rules module.
+ * To pre-allocate resources as per the flow port attributes,
+ * this configuration function must be called before any flow rule is created.
+ * No other rte_flow function should be called while this function is invoked.
+ * This function can be called again to change the configuration.
+ * Some PMDs may not support re-configuration at all,
+ * or may only allow increasing the number of resources allocated.
+ *
+ * @param port_id
+ *   Port identifier of Ethernet device.
+ * @param[in] port_attr
+ *   Port configuration attributes.
+ * @param[out] error
+ *   Perform verbose error reporting if not NULL.
+ *   PMDs initialize this structure in case of error only.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_configure(uint16_t port_id,
+		   const struct rte_flow_port_attr *port_attr,
+		   struct rte_flow_error *error);
 #ifdef __cplusplus
 }
 #endif
-- 
2.18.2