From: Bruce Richardson <bruce.richardson@intel.com>
To: dev@dpdk.org
Cc: david.marchand@redhat.com, dmitry.kozliuk@gmail.com,
navasile@linux.microsoft.com, dmitrym@microsoft.com,
pallavi.kadam@intel.com,
Bruce Richardson <bruce.richardson@intel.com>,
Konstantin Ananyev <konstantin.ananyev@intel.com>,
Nicolas Chautru <nicolas.chautru@intel.com>,
Fiona Trahe <fiona.trahe@intel.com>,
Ashish Gupta <ashish.gupta@marvell.com>,
David Hunt <david.hunt@intel.com>,
Byron Marohn <byron.marohn@intel.com>,
Yipeng Wang <yipeng1.wang@intel.com>,
Jerin Jacob <jerinj@marvell.com>,
Vladimir Medvedkin <vladimir.medvedkin@intel.com>,
Bernard Iremonger <bernard.iremonger@intel.com>,
Kiran Kumar K <kirankumark@marvell.com>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
Ferruh Yigit <ferruh.yigit@intel.com>,
Sameh Gobriel <sameh.gobriel@intel.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>,
Cristian Dumitrescu <cristian.dumitrescu@intel.com>,
Nipun Gupta <nipun.gupta@nxp.com>,
Hemant Agrawal <hemant.agrawal@nxp.com>,
Ori Kam <orika@nvidia.com>,
Reshma Pattan <reshma.pattan@intel.com>,
Jasvinder Singh <jasvinder.singh@intel.com>
Subject: [dpdk-dev] [PATCH v2 3/3] build/windows: remove separate list of libs
Date: Wed, 20 Oct 2021 12:25:54 +0100 [thread overview]
Message-ID: <20211020112554.2421080-4-bruce.richardson@intel.com> (raw)
In-Reply-To: <20211020112554.2421080-1-bruce.richardson@intel.com>
Rather than maintaining a separate list of libraries which are to be
built on windows, use the standard library list and explicitly add to
each library that is not to be built a check for windows and disable
the library at that per-lib level. As well as shortening the main
lib/meson.build file, this also leads to the build summary at the end of
the meson config run correctly listing the libraries which are not to be
built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
NOTE: no attempt was made to add additional libraries to the windows,
build. This patch was generated by an automated script run using the
lists of libraries for windows/non-windows builds.
---
lib/acl/meson.build | 6 ++++++
lib/bbdev/meson.build | 6 ++++++
lib/bpf/meson.build | 6 ++++++
lib/compressdev/meson.build | 6 ++++++
lib/distributor/meson.build | 6 ++++++
lib/efd/meson.build | 6 ++++++
lib/eventdev/meson.build | 6 ++++++
lib/fib/meson.build | 6 ++++++
lib/flow_classify/meson.build | 6 ++++++
lib/graph/meson.build | 6 ++++++
lib/ip_frag/meson.build | 6 ++++++
lib/ipsec/meson.build | 6 ++++++
lib/jobstats/meson.build | 6 ++++++
lib/kni/meson.build | 6 ++++++
lib/lpm/meson.build | 6 ++++++
lib/member/meson.build | 6 ++++++
lib/meson.build | 30 ------------------------------
lib/node/meson.build | 6 ++++++
lib/pipeline/meson.build | 6 ++++++
lib/port/meson.build | 6 ++++++
lib/power/meson.build | 6 ++++++
lib/rawdev/meson.build | 6 ++++++
lib/regexdev/meson.build | 6 ++++++
lib/reorder/meson.build | 6 ++++++
lib/rib/meson.build | 6 ++++++
lib/sched/meson.build | 6 ++++++
lib/table/meson.build | 6 ++++++
27 files changed, 156 insertions(+), 30 deletions(-)
diff --git a/lib/acl/meson.build b/lib/acl/meson.build
index fbb1318230..f3dc513846 100644
--- a/lib/acl/meson.build
+++ b/lib/acl/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('acl_bld.c', 'acl_gen.c', 'acl_run_scalar.c',
'rte_acl.c', 'tb_mem.c')
headers = files('rte_acl.h', 'rte_acl_osdep.h')
diff --git a/lib/bbdev/meson.build b/lib/bbdev/meson.build
index 2969cab26b..07685e7578 100644
--- a/lib/bbdev/meson.build
+++ b/lib/bbdev/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_bbdev.c')
headers = files('rte_bbdev.h',
'rte_bbdev_pmd.h',
diff --git a/lib/bpf/meson.build b/lib/bpf/meson.build
index 63cbd60185..eb94bf18c4 100644
--- a/lib/bpf/meson.build
+++ b/lib/bpf/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2018 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('bpf.c',
'bpf_exec.c',
'bpf_load.c',
diff --git a/lib/compressdev/meson.build b/lib/compressdev/meson.build
index 663ceec0b9..75ea666a9b 100644
--- a/lib/compressdev/meson.build
+++ b/lib/compressdev/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2018 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_compressdev.c',
'rte_compressdev_pmd.c',
'rte_comp.c')
diff --git a/lib/distributor/meson.build b/lib/distributor/meson.build
index cefe1b9f19..24988c5827 100644
--- a/lib/distributor/meson.build
+++ b/lib/distributor/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_distributor.c', 'rte_distributor_single.c')
if arch_subdir == 'x86'
sources += files('rte_distributor_match_sse.c')
diff --git a/lib/efd/meson.build b/lib/efd/meson.build
index 07fb1c29a7..343f14e1f3 100644
--- a/lib/efd/meson.build
+++ b/lib/efd/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_efd.c')
headers = files('rte_efd.h')
deps += ['ring', 'hash']
diff --git a/lib/eventdev/meson.build b/lib/eventdev/meson.build
index 32abeba794..bf7cf82eee 100644
--- a/lib/eventdev/meson.build
+++ b/lib/eventdev/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
if is_linux
cflags += '-DLINUX'
else
diff --git a/lib/fib/meson.build b/lib/fib/meson.build
index 5618c215a7..593c8c47c8 100644
--- a/lib/fib/meson.build
+++ b/lib/fib/meson.build
@@ -2,6 +2,12 @@
# Copyright(c) 2018 Vladimir Medvedkin <medvedkinv@gmail.com>
# Copyright(c) 2019 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_fib.c', 'rte_fib6.c', 'dir24_8.c', 'trie.c')
headers = files('rte_fib.h', 'rte_fib6.h')
deps += ['rib']
diff --git a/lib/flow_classify/meson.build b/lib/flow_classify/meson.build
index a7a5b3d577..3bb861c68f 100644
--- a/lib/flow_classify/meson.build
+++ b/lib/flow_classify/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_flow_classify.c', 'rte_flow_classify_parse.c')
headers = files('rte_flow_classify.h')
deps += ['net', 'table']
diff --git a/lib/graph/meson.build b/lib/graph/meson.build
index 6befb094d2..c7327549e8 100644
--- a/lib/graph/meson.build
+++ b/lib/graph/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(C) 2020 Marvell International Ltd.
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files(
'node.c',
'graph.c',
diff --git a/lib/ip_frag/meson.build b/lib/ip_frag/meson.build
index ea2de09f75..3a252bdaf6 100644
--- a/lib/ip_frag/meson.build
+++ b/lib/ip_frag/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files(
'rte_ipv4_fragmentation.c',
'rte_ipv6_fragmentation.c',
diff --git a/lib/ipsec/meson.build b/lib/ipsec/meson.build
index 1497f573bb..531a97f143 100644
--- a/lib/ipsec/meson.build
+++ b/lib/ipsec/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2018 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('esp_inb.c', 'esp_outb.c', 'sa.c', 'ses.c', 'ipsec_sad.c')
headers = files('rte_ipsec.h', 'rte_ipsec_sa.h', 'rte_ipsec_sad.h')
diff --git a/lib/jobstats/meson.build b/lib/jobstats/meson.build
index 391e4f802e..6da2a95b75 100644
--- a/lib/jobstats/meson.build
+++ b/lib/jobstats/meson.build
@@ -1,5 +1,11 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_jobstats.c')
headers = files('rte_jobstats.h')
diff --git a/lib/kni/meson.build b/lib/kni/meson.build
index e2e4e44fc6..8a71d8ba6f 100644
--- a/lib/kni/meson.build
+++ b/lib/kni/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
if not is_linux or not dpdk_conf.get('RTE_ARCH_64')
build = false
reason = 'only supported on 64-bit Linux'
diff --git a/lib/lpm/meson.build b/lib/lpm/meson.build
index 5ca54815e4..78d91d3421 100644
--- a/lib/lpm/meson.build
+++ b/lib/lpm/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_lpm.c', 'rte_lpm6.c')
headers = files('rte_lpm.h', 'rte_lpm6.h')
# since header files have different names, we can install all vector headers
diff --git a/lib/member/meson.build b/lib/member/meson.build
index 0e6b34c406..e06fddc240 100644
--- a/lib/member/meson.build
+++ b/lib/member/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_member.c', 'rte_member_ht.c', 'rte_member_vbf.c')
headers = files('rte_member.h')
deps += ['hash']
diff --git a/lib/meson.build b/lib/meson.build
index 403b1f4aa4..c1bf2385a0 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -63,36 +63,6 @@ libraries = [
'node',
]
-if is_windows
- libraries = [
- 'kvargs',
- 'telemetry',
- 'eal',
- 'ring',
- 'rcu',
- 'mempool',
- 'mbuf',
- 'net',
- 'meter',
- 'ethdev',
- 'dmadev',
- 'pci',
- 'cmdline',
- 'metrics',
- 'hash',
- 'timer',
- 'bitratestats',
- 'cryptodev',
- 'cfgfile',
- 'gro',
- 'gso',
- 'latencystats',
- 'pdump',
- 'stack',
- 'security',
- ] # only supported libraries for windows
-endif
-
optional_libs = [
'kni',
'power',
diff --git a/lib/node/meson.build b/lib/node/meson.build
index 230aa6fa0f..dbdf673c86 100644
--- a/lib/node/meson.build
+++ b/lib/node/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(C) 2020 Marvell International Ltd.
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files(
'ethdev_ctrl.c',
'ethdev_rx.c',
diff --git a/lib/pipeline/meson.build b/lib/pipeline/meson.build
index 9132bb517a..3ca98ed194 100644
--- a/lib/pipeline/meson.build
+++ b/lib/pipeline/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files(
'rte_pipeline.c',
'rte_port_in_action.c',
diff --git a/lib/port/meson.build b/lib/port/meson.build
index 289bc47f6e..854bf39cd9 100644
--- a/lib/port/meson.build
+++ b/lib/port/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files(
'rte_port_ethdev.c',
'rte_port_fd.c',
diff --git a/lib/power/meson.build b/lib/power/meson.build
index bf937acde4..ba8d66074b 100644
--- a/lib/power/meson.build
+++ b/lib/power/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
if not is_linux
build = false
reason = 'only supported on Linux'
diff --git a/lib/rawdev/meson.build b/lib/rawdev/meson.build
index 30d363cd2d..7dfc3d5cf9 100644
--- a/lib/rawdev/meson.build
+++ b/lib/rawdev/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2018 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_rawdev.c')
headers = files('rte_rawdev.h', 'rte_rawdev_pmd.h')
diff --git a/lib/regexdev/meson.build b/lib/regexdev/meson.build
index 7e12d8cd6d..426e764ece 100644
--- a/lib/regexdev/meson.build
+++ b/lib/regexdev/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright 2020 Mellanox Technologies, Ltd
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_regexdev.c')
headers = files('rte_regexdev.h', 'rte_regexdev_driver.h')
indirect_headers += files('rte_regexdev_core.h')
diff --git a/lib/reorder/meson.build b/lib/reorder/meson.build
index 03aed53d90..621c1f3501 100644
--- a/lib/reorder/meson.build
+++ b/lib/reorder/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_reorder.c')
headers = files('rte_reorder.h')
deps += ['mbuf']
diff --git a/lib/rib/meson.build b/lib/rib/meson.build
index 7bacbb4535..bda7f576e9 100644
--- a/lib/rib/meson.build
+++ b/lib/rib/meson.build
@@ -2,6 +2,12 @@
# Copyright(c) 2018 Vladimir Medvedkin <medvedkinv@gmail.com>
# Copyright(c) 2019 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_rib.c', 'rte_rib6.c')
headers = files('rte_rib.h', 'rte_rib6.h')
deps += ['mempool']
diff --git a/lib/sched/meson.build b/lib/sched/meson.build
index b24f7b8775..8ced4547aa 100644
--- a/lib/sched/meson.build
+++ b/lib/sched/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files('rte_sched.c', 'rte_red.c', 'rte_approx.c')
headers = files(
'rte_approx.h',
diff --git a/lib/table/meson.build b/lib/table/meson.build
index ac1f1aac27..d1f2f9dcf6 100644
--- a/lib/table/meson.build
+++ b/lib/table/meson.build
@@ -1,6 +1,12 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
sources = files(
'rte_swx_table_em.c',
'rte_swx_table_learner.c',
--
2.30.2
next prev parent reply other threads:[~2021-10-20 11:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-19 16:15 [dpdk-dev] [PATCH] " Bruce Richardson
2021-10-20 6:29 ` David Marchand
2021-10-20 8:30 ` Bruce Richardson
2021-10-20 11:25 ` [dpdk-dev] [PATCH v2 0/3] library build improvements on windows Bruce Richardson
2021-10-20 11:25 ` [dpdk-dev] [PATCH v2 1/3] dmadev: remove symbol versioning for inline helpers Bruce Richardson
2021-10-20 11:25 ` [dpdk-dev] [PATCH v2 2/3] dmadev: enable build on Windows Bruce Richardson
2021-10-20 12:42 ` Bruce Richardson
2021-10-20 13:01 ` Walsh, Conor
2021-10-20 11:25 ` Bruce Richardson [this message]
2021-10-22 20:25 ` [dpdk-dev] [PATCH v2 0/3] library build improvements on windows Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211020112554.2421080-4-bruce.richardson@intel.com \
--to=bruce.richardson@intel.com \
--cc=ashish.gupta@marvell.com \
--cc=bernard.iremonger@intel.com \
--cc=byron.marohn@intel.com \
--cc=cristian.dumitrescu@intel.com \
--cc=david.hunt@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=dmitry.kozliuk@gmail.com \
--cc=dmitrym@microsoft.com \
--cc=ferruh.yigit@intel.com \
--cc=fiona.trahe@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=jasvinder.singh@intel.com \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=navasile@linux.microsoft.com \
--cc=ndabilpuram@marvell.com \
--cc=nicolas.chautru@intel.com \
--cc=nipun.gupta@nxp.com \
--cc=orika@nvidia.com \
--cc=pallavi.kadam@intel.com \
--cc=pbhagavatula@marvell.com \
--cc=reshma.pattan@intel.com \
--cc=sameh.gobriel@intel.com \
--cc=vladimir.medvedkin@intel.com \
--cc=yipeng1.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).