DPDK patches and discussions
 help / color / mirror / Atom feed
From: Apeksha Gupta <apeksha.gupta@nxp.com>
To: david.marchand@redhat.com, andrew.rybchenko@oktetlabs.ru,
	ferruh.yigit@intel.com
Cc: dev@dpdk.org, sachin.saxena@nxp.com, hemant.agrawal@nxp.com,
	Apeksha Gupta <apeksha.gupta@nxp.com>
Subject: [dpdk-dev] [PATCH v6 1/5] net/enetfec: introduce NXP ENETFEC driver
Date: Thu, 21 Oct 2021 10:16:56 +0530	[thread overview]
Message-ID: <20211021044700.12370-2-apeksha.gupta@nxp.com> (raw)
In-Reply-To: <20211021044700.12370-1-apeksha.gupta@nxp.com>

ENETFEC (Fast Ethernet Controller) is a network poll mode driver
for NXP SoC i.MX 8M Mini.

This patch adds skeleton for enetfec driver with probe function.

Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
---

v6:
 - Fix document build errors
---
---
 MAINTAINERS                            |   7 +
 doc/guides/nics/enetfec.rst            | 131 ++++++++++++++++++
 doc/guides/nics/features/enetfec.ini   |   9 ++
 doc/guides/nics/index.rst              |   1 +
 doc/guides/rel_notes/release_21_11.rst |   4 +
 drivers/net/enetfec/enet_ethdev.c      |  85 ++++++++++++
 drivers/net/enetfec/enet_ethdev.h      | 179 +++++++++++++++++++++++++
 drivers/net/enetfec/enet_pmd_logs.h    |  31 +++++
 drivers/net/enetfec/meson.build        |  11 ++
 drivers/net/enetfec/version.map        |   3 +
 drivers/net/meson.build                |   1 +
 11 files changed, 462 insertions(+)
 create mode 100644 doc/guides/nics/enetfec.rst
 create mode 100644 doc/guides/nics/features/enetfec.ini
 create mode 100644 drivers/net/enetfec/enet_ethdev.c
 create mode 100644 drivers/net/enetfec/enet_ethdev.h
 create mode 100644 drivers/net/enetfec/enet_pmd_logs.h
 create mode 100644 drivers/net/enetfec/meson.build
 create mode 100644 drivers/net/enetfec/version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 8dceb6c0e0..db2df484d0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -876,6 +876,13 @@ F: drivers/net/enetc/
 F: doc/guides/nics/enetc.rst
 F: doc/guides/nics/features/enetc.ini
 
+NXP enetfec
+M: Apeksha Gupta <apeksha.gupta@nxp.com>
+M: Sachin Saxena <sachin.saxena@nxp.com>
+F: drivers/net/enetfec/
+F: doc/guides/nics/enetfec.rst
+F: doc/guides/nics/features/enetfec.ini
+
 NXP pfe
 M: Gagandeep Singh <g.singh@nxp.com>
 F: doc/guides/nics/pfe.rst
diff --git a/doc/guides/nics/enetfec.rst b/doc/guides/nics/enetfec.rst
new file mode 100644
index 0000000000..dfcd032098
--- /dev/null
+++ b/doc/guides/nics/enetfec.rst
@@ -0,0 +1,131 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+   Copyright 2021 NXP
+
+ENETFEC Poll Mode Driver
+========================
+
+The ENETFEC NIC PMD (**librte_net_enetfec**) provides poll mode driver
+support for the inbuilt NIC found in the ** NXP i.MX 8M Mini** SoC.
+
+More information can be found at NXP Official Website
+<https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/i-mx-applications-processors/i-mx-8-processors/i-mx-8m-mini-arm-cortex-a53-cortex-m4-audio-voice-video:i.MX8MMINI>
+
+ENETFEC
+-------
+
+This section provides an overview of the NXP ENETFEC and how it is
+integrated into the DPDK.
+
+Contents summary
+
+- ENETFEC overview
+- ENETFEC features
+- Supported ENETFEC SoCs
+- Prerequisites
+- Driver compilation and testing
+- Limitations
+
+ENETFEC Overview
+~~~~~~~~~~~~~~~~
+The i.MX 8M Mini Media Applications Processor is built to achieve both
+high performance and low power consumption. ENETFEC PMD is a hardware
+programmable packet forwarding engine to provide high performance
+Ethernet interface. It has only 1 GB Ethernet interface with RJ45
+connector.
+
+The diagram below shows a system level overview of ENETFEC:
+
+  .. code-block:: console
+
+   =====================================================
+   Userspace
+        +-----------------------------------------+
+        |             ENETFEC Driver              |
+        |        +-------------------------+      |
+        |        | virtual ethernet device |      |
+        +-----------------------------------------+
+                          ^   |
+                          |   |
+                          |   |
+                     RXQ  |   |	TXQ
+                          |   |
+                          |   v
+   =====================================================
+   Kernel Space
+                       +---------+
+                       | fec-uio |
+   ====================+=========+======================
+   Hardware
+        +-----------------------------------------+
+        |           i.MX 8M MINI EVK              |
+        |               +-----+                   |
+        |               | MAC |                   |
+        +---------------+-----+-------------------+
+                        | PHY |
+                        +-----+
+
+ENETFEC Ethernet driver is traditional DPDK PMD driver running in the
+userspace.'fec-uio' is the kernel driver. The MAC and PHY are the hardware
+blocks. ENETFEC PMD uses standard UIO interface to access kernel for PHY
+initialisation and for mapping the allocated memory of register & buffer
+descriptor with DPDK which gives access to non-cacheable memory for buffer
+descriptor. net_enetfec is logical Ethernet interface, created by ENETFEC
+driver.
+
+- ENETFEC driver registers the device in virtual device driver.
+- RTE framework scans and will invoke the probe function of ENETFEC driver.
+- The probe function will set the basic device registers and also setups BD rings.
+- On packet Rx the respective BD Ring status bit is set which is then used for
+  packet processing.
+- Then Tx is done first followed by Rx via logical interfaces.
+
+ENETFEC Features
+~~~~~~~~~~~~~~~~~
+
+- Linux
+- ARMv8
+
+Supported ENETFEC SoCs
+~~~~~~~~~~~~~~~~~~~~~~
+
+- i.MX 8M Mini
+
+Prerequisites
+~~~~~~~~~~~~~
+
+There are three main pre-requisites for executing ENETFEC PMD on a i.MX 8M Mini
+compatible board:
+
+1. **ARM 64 Tool Chain**
+
+   For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/7.4-2019.02/aarch64-linux-gnu/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz>`_.
+
+2. **Linux Kernel**
+
+  It can be obtained from `NXP's Github hosting <https://source.codeaurora.org/external/qoriq/qoriq-components/linux>`_.
+
+  .. note::
+
+  Branch is 'lf-5.10.y'
+
+3. **Rootfile system**
+
+   Any *aarch64* supporting filesystem can be used. For example,
+   Ubuntu 18.04 LTS (Bionic) or 20.04 LTS(Focal) userland which can be obtained
+   from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/18.04/release/ubuntu-base-18.04.1-base-arm64.tar.gz>`_.
+
+4. The Ethernet device will be registered as virtual device, so ENETFEC has dependency on
+   **rte_bus_vdev** library and it is mandatory to use `--vdev` with value `net_enetfec` to
+   run DPDK application.
+
+Driver compilation and testing
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Follow instructions available in the document
+:ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+to launch **dpdk-testpmd**
+
+Limitations
+~~~~~~~~~~~
+
+- Multi queue is not supported.
diff --git a/doc/guides/nics/features/enetfec.ini b/doc/guides/nics/features/enetfec.ini
new file mode 100644
index 0000000000..bdfbdbd9d4
--- /dev/null
+++ b/doc/guides/nics/features/enetfec.ini
@@ -0,0 +1,9 @@
+;
+; Supported features of the 'enetfec' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Linux		     = Y
+ARMv8		     = Y
+Usage doc	     = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 784d5d39f6..777fdab4a0 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -26,6 +26,7 @@ Network Interface Controller Drivers
     e1000em
     ena
     enetc
+    enetfec
     enic
     fm10k
     hinic
diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
index 3362c52a73..e964838967 100644
--- a/doc/guides/rel_notes/release_21_11.rst
+++ b/doc/guides/rel_notes/release_21_11.rst
@@ -20,6 +20,10 @@ DPDK Release 21.11
       ninja -C build doc
       xdg-open build/doc/guides/html/rel_notes/release_21_11.html
 
+* **Added NXP ENETFEC PMD.**
+
+  Added the new ENETFEC driver for the NXP IMX8MMEVK platform. See the
+  :doc:`../nics/enetfec` NIC driver guide for more details on this new driver.
 
 New Features
 ------------
diff --git a/drivers/net/enetfec/enet_ethdev.c b/drivers/net/enetfec/enet_ethdev.c
new file mode 100644
index 0000000000..8a74fb5bf2
--- /dev/null
+++ b/drivers/net/enetfec/enet_ethdev.c
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020-2021 NXP
+ */
+
+#include <stdio.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sys/mman.h>
+#include <rte_kvargs.h>
+#include <ethdev_vdev.h>
+#include <rte_bus_vdev.h>
+#include <rte_dev.h>
+#include <rte_ether.h>
+#include "enet_ethdev.h"
+#include "enet_pmd_logs.h"
+
+#define ENETFEC_NAME_PMD                net_enetfec
+#define ENETFEC_CDEV_INVALID_FD         -1
+
+static int
+enetfec_eth_init(struct rte_eth_dev *dev)
+{
+	rte_eth_dev_probing_finish(dev);
+	return 0;
+}
+
+static int
+pmd_enetfec_probe(struct rte_vdev_device *vdev)
+{
+	struct rte_eth_dev *dev = NULL;
+	struct enetfec_private *fep;
+	const char *name;
+	int rc;
+
+	name = rte_vdev_device_name(vdev);
+	if (name == NULL)
+		return -EINVAL;
+	ENETFEC_PMD_LOG(INFO, "Initializing pmd_fec for %s", name);
+
+	dev = rte_eth_vdev_allocate(vdev, sizeof(*fep));
+	if (dev == NULL)
+		return -ENOMEM;
+
+	/* setup board info structure */
+	fep = dev->data->dev_private;
+	fep->dev = dev;
+	rc = enetfec_eth_init(dev);
+	if (rc)
+		goto failed_init;
+
+	return 0;
+
+failed_init:
+	ENETFEC_PMD_ERR("Failed to init");
+	return rc;
+}
+
+static int
+pmd_enetfec_remove(struct rte_vdev_device *vdev)
+{
+	struct rte_eth_dev *eth_dev = NULL;
+	int ret;
+
+	/* find the ethdev entry */
+	eth_dev = rte_eth_dev_allocated(rte_vdev_device_name(vdev));
+	if (eth_dev == NULL)
+		return -ENODEV;
+
+	ret = rte_eth_dev_release_port(eth_dev);
+	if (ret != 0)
+		return -EINVAL;
+
+	ENETFEC_PMD_INFO("Closing sw device");
+	return 0;
+}
+
+static struct rte_vdev_driver pmd_enetfec_drv = {
+	.probe = pmd_enetfec_probe,
+	.remove = pmd_enetfec_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(ENETFEC_NAME_PMD, pmd_enetfec_drv);
+RTE_LOG_REGISTER_DEFAULT(enetfec_logtype_pmd, NOTICE);
diff --git a/drivers/net/enetfec/enet_ethdev.h b/drivers/net/enetfec/enet_ethdev.h
new file mode 100644
index 0000000000..c674dfc782
--- /dev/null
+++ b/drivers/net/enetfec/enet_ethdev.h
@@ -0,0 +1,179 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020-2021 NXP
+ */
+
+#ifndef __ENETFEC_ETHDEV_H__
+#define __ENETFEC_ETHDEV_H__
+
+#include <rte_ethdev.h>
+
+/*
+ * ENETFEC with AVB IP can support maximum 3 rx and tx queues.
+ */
+#define ENETFEC_MAX_Q		3
+
+#define ETHER_ADDR_LEN		6
+#define BD_LEN			49152
+#define ENETFEC_TX_FR_SIZE	2048
+#define MAX_TX_BD_RING_SIZE	512	/* It should be power of 2 */
+#define MAX_RX_BD_RING_SIZE	512
+
+/* full duplex or half duplex */
+#define HALF_DUPLEX             0x00
+#define FULL_DUPLEX             0x01
+#define UNKNOWN_DUPLEX          0xff
+
+#define PKT_MAX_BUF_SIZE        1984
+#define OPT_FRAME_SIZE		(PKT_MAX_BUF_SIZE << 16)
+#define ETH_ALEN		RTE_ETHER_ADDR_LEN
+#define ETH_HLEN		RTE_ETHER_HDR_LEN
+#define VLAN_HLEN		4
+
+#define __iomem
+#if defined(RTE_ARCH_ARM)
+#if defined(RTE_ARCH_64)
+#define dcbf(p) { asm volatile("dc cvac, %0" : : "r"(p) : "memory"); }
+#define dcbf_64(p) dcbf(p)
+
+#else /* RTE_ARCH_32 */
+#define dcbf(p) RTE_SET_USED(p)
+#define dcbf_64(p) dcbf(p)
+#endif
+
+#else
+#define dcbf(p) RTE_SET_USED(p)
+#define dcbf_64(p) dcbf(p)
+#endif
+
+/* Required types */
+typedef uint8_t         u8;
+typedef uint16_t        u16;
+typedef uint32_t        u32;
+typedef uint64_t        u64;
+
+struct bufdesc {
+	uint16_t		bd_datlen;  /* buffer data length */
+	uint16_t		bd_sc;	    /* buffer control & status */
+	uint32_t		bd_bufaddr; /* buffer address */
+};
+
+struct bufdesc_ex {
+	struct			bufdesc desc;
+	uint32_t		bd_esc;
+	uint32_t		bd_prot;
+	uint32_t		bd_bdu;
+	uint32_t		ts;
+	uint16_t		res0[4];
+};
+
+struct bufdesc_prop {
+	int			queue_id;
+	/* Addresses of Tx and Rx buffers */
+	struct bufdesc		*base;
+	struct bufdesc		*last;
+	struct bufdesc		*cur;
+	void __iomem		*active_reg_desc;
+	uint64_t		descr_baseaddr_p;
+	unsigned short		ring_size;
+	unsigned char		d_size;
+	unsigned char		d_size_log2;
+};
+
+struct enetfec_priv_tx_q {
+	struct bufdesc_prop	bd;
+	struct rte_mbuf		*tx_mbuf[MAX_TX_BD_RING_SIZE];
+	struct bufdesc		*dirty_tx;
+	struct rte_mempool	*pool;
+	struct enetfec_private	*fep;
+};
+
+struct enetfec_priv_rx_q {
+	struct bufdesc_prop	bd;
+	struct rte_mbuf		*rx_mbuf[MAX_RX_BD_RING_SIZE];
+	struct rte_mempool	*pool;
+	struct enetfec_private	*fep;
+};
+
+/* Buffer descriptors of FEC are used to track the ring buffers. Buffer
+ * descriptor base is x_bd_base. Currently available buffer are x_cur
+ * and x_cur. where x is rx or tx. Current buffer is tracked by dirty_tx
+ * that is sent by the controller.
+ * The tx_cur and dirty_tx are same in completely full and empty
+ * conditions. Actual condition is determined by empty & ready bits.
+ */
+struct enetfec_private {
+	struct rte_eth_dev	*dev;
+	struct rte_eth_stats	stats;
+	struct rte_mempool	*pool;
+	uint16_t		max_rx_queues;
+	uint16_t		max_tx_queues;
+	unsigned int		total_tx_ring_size;
+	unsigned int		total_rx_ring_size;
+	bool			bufdesc_ex;
+	unsigned int		tx_align;
+	unsigned int		rx_align;
+	int			full_duplex;
+	unsigned int		phy_speed;
+	uint32_t		quirks;
+	int			flag_csum;
+	int			flag_pause;
+	int			flag_wol;
+	bool			rgmii_txc_delay;
+	bool			rgmii_rxc_delay;
+	int			link;
+	void			*hw_baseaddr_v;
+	uint64_t		hw_baseaddr_p;
+	void			*bd_addr_v;
+	uint64_t		bd_addr_p;
+	uint64_t		bd_addr_p_r[ENETFEC_MAX_Q];
+	uint64_t		bd_addr_p_t[ENETFEC_MAX_Q];
+	void			*dma_baseaddr_r[ENETFEC_MAX_Q];
+	void			*dma_baseaddr_t[ENETFEC_MAX_Q];
+	uint64_t		cbus_size;
+	unsigned int		reg_size;
+	unsigned int		bd_size;
+	int			hw_ts_rx_en;
+	int			hw_ts_tx_en;
+	struct enetfec_priv_rx_q *rx_queues[ENETFEC_MAX_Q];
+	struct enetfec_priv_tx_q *tx_queues[ENETFEC_MAX_Q];
+};
+
+#define writel(v, p) ({*(volatile unsigned int *)(p) = (v); })
+#define readl(p) rte_read32(p)
+
+static inline struct
+bufdesc *enet_get_nextdesc(struct bufdesc *bdp, struct bufdesc_prop *bd)
+{
+	return (bdp >= bd->last) ? bd->base
+		: (struct bufdesc *)(((uintptr_t)bdp) + bd->d_size);
+}
+
+static inline struct
+bufdesc *enet_get_prevdesc(struct bufdesc *bdp, struct bufdesc_prop *bd)
+{
+	return (bdp <= bd->base) ? bd->last
+		: (struct bufdesc *)(((uintptr_t)bdp) - bd->d_size);
+}
+
+static inline int
+enet_get_bd_index(struct bufdesc *bdp, struct bufdesc_prop *bd)
+{
+	return ((const char *)bdp - (const char *)bd->base) >> bd->d_size_log2;
+}
+
+static inline int
+fls64(unsigned long word)
+{
+	return (64 - __builtin_clzl(word)) - 1;
+}
+
+uint16_t enetfec_recv_pkts(void *rxq1, __rte_unused struct rte_mbuf **rx_pkts,
+		uint16_t nb_pkts);
+uint16_t enetfec_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+		uint16_t nb_pkts);
+struct bufdesc *enet_get_nextdesc(struct bufdesc *bdp,
+		struct bufdesc_prop *bd);
+int enet_new_rxbdp(struct enetfec_private *fep, struct bufdesc *bdp,
+		struct rte_mbuf *mbuf);
+
+#endif /*__ENETFEC_ETHDEV_H__*/
diff --git a/drivers/net/enetfec/enet_pmd_logs.h b/drivers/net/enetfec/enet_pmd_logs.h
new file mode 100644
index 0000000000..e7b3964a0e
--- /dev/null
+++ b/drivers/net/enetfec/enet_pmd_logs.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020-2021 NXP
+ */
+
+#ifndef _ENETFEC_LOGS_H_
+#define _ENETFEC_LOGS_H_
+
+extern int enetfec_logtype_pmd;
+
+/* PMD related logs */
+#define ENETFEC_PMD_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, enetfec_logtype_pmd, "\nfec_net: %s()" \
+		fmt "\n", __func__, ##args)
+
+#define PMD_INIT_FUNC_TRACE() ENET_PMD_LOG(DEBUG, " >>")
+
+#define ENETFEC_PMD_DEBUG(fmt, args...) \
+	ENETFEC_PMD_LOG(DEBUG, fmt, ## args)
+#define ENETFEC_PMD_ERR(fmt, args...) \
+	ENETFEC_PMD_LOG(ERR, fmt, ## args)
+#define ENETFEC_PMD_INFO(fmt, args...) \
+	ENETFEC_PMD_LOG(INFO, fmt, ## args)
+
+#define ENETFEC_PMD_WARN(fmt, args...) \
+	ENETFEC_PMD_LOG(WARNING, fmt, ## args)
+
+/* DP Logs, toggled out at compile time if level lower than current level */
+#define ENETFEC_DP_LOG(level, fmt, args...) \
+	RTE_LOG_DP(level, PMD, fmt, ## args)
+
+#endif /* _ENETFEC_LOGS_H_ */
diff --git a/drivers/net/enetfec/meson.build b/drivers/net/enetfec/meson.build
new file mode 100644
index 0000000000..79dca58dea
--- /dev/null
+++ b/drivers/net/enetfec/meson.build
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2021 NXP
+
+if not is_linux
+	build = false
+	reason = 'only supported on linux'
+endif
+
+sources = files('enet_ethdev.c',
+		'enet_uio.c',
+		'enet_rxtx.c')
diff --git a/drivers/net/enetfec/version.map b/drivers/net/enetfec/version.map
new file mode 100644
index 0000000000..b66517b171
--- /dev/null
+++ b/drivers/net/enetfec/version.map
@@ -0,0 +1,3 @@
+DPDK_22 {
+        local: *;
+};
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index 24ad121fe4..ac294d8507 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -18,6 +18,7 @@ drivers = [
         'e1000',
         'ena',
         'enetc',
+        'enetfec',
         'enic',
         'failsafe',
         'fm10k',
-- 
2.17.1


  reply	other threads:[~2021-10-21  4:47 UTC|newest]

Thread overview: 91+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-01 11:42 [dpdk-dev] [PATCH v4 0/5] drivers/net: add " Apeksha Gupta
2021-10-01 11:42 ` [dpdk-dev] [PATCH v4 1/5] net/enetfec: introduce " Apeksha Gupta
2021-10-19 18:39   ` [dpdk-dev] [PATCH v5 0/5] drivers/net: add " Apeksha Gupta
2021-10-19 18:39     ` [dpdk-dev] [PATCH v5 1/5] net/enetfec: introduce " Apeksha Gupta
2021-10-21  4:46       ` [dpdk-dev] [PATCH v6 0/5] drivers/net: add " Apeksha Gupta
2021-10-21  4:46         ` Apeksha Gupta [this message]
2021-10-21  5:24           ` [dpdk-dev] [PATCH v6 1/5] net/enetfec: introduce " Hemant Agrawal
2021-10-27 14:18           ` Ferruh Yigit
2021-11-08 18:42             ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-11-03 19:20           ` [dpdk-dev] [PATCH v7 0/5] drivers/net: add " Apeksha Gupta
2021-11-03 19:20             ` [dpdk-dev] [PATCH v7 1/5] net/enetfec: introduce " Apeksha Gupta
2021-11-03 23:27               ` Ferruh Yigit
2021-11-04 18:24               ` Ferruh Yigit
2021-11-08 19:13                 ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-11-09 11:34               ` [dpdk-dev] [PATCH v8 0/5] drivers/net: add " Apeksha Gupta
2021-11-09 11:34                 ` [dpdk-dev] [PATCH v8 1/5] net/enetfec: introduce " Apeksha Gupta
2021-11-09 11:34                 ` [dpdk-dev] [PATCH v8 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-11-09 11:34                 ` [dpdk-dev] [PATCH v8 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-11-09 11:34                 ` [dpdk-dev] [PATCH v8 4/5] net/enetfec: add Rx/Tx support Apeksha Gupta
2021-11-09 11:34                 ` [dpdk-dev] [PATCH v8 5/5] net/enetfec: add features Apeksha Gupta
2021-11-10  7:48                   ` [dpdk-dev] [PATCH v9 0/5] drivers/net: add NXP ENETFEC driver Apeksha Gupta
2021-11-10  7:48                     ` [dpdk-dev] [PATCH v9 1/5] net/enetfec: introduce " Apeksha Gupta
2021-11-10 13:53                       ` Ferruh Yigit
2021-11-13  4:31                       ` [PATCH v10 0/5] drivers/net: add " Apeksha Gupta
2021-11-13  4:31                         ` [PATCH v10 1/5] net/enetfec: introduce " Apeksha Gupta
2021-11-15  7:19                           ` [PATCH v11 0/5] drivers/net: add " Apeksha Gupta
2021-11-15  7:19                             ` [PATCH v11 1/5] net/enetfec: introduce " Apeksha Gupta
2021-11-15 10:07                               ` Ferruh Yigit
2023-03-21 18:03                               ` Ferruh Yigit
2023-03-23  6:00                                 ` Sachin Saxena (OSS)
2023-03-23 11:07                                   ` Ferruh Yigit
2023-03-23 11:09                                     ` Sachin Saxena (OSS)
2021-11-15  7:19                             ` [PATCH v11 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-11-15  7:19                             ` [PATCH v11 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-11-15 10:11                               ` Ferruh Yigit
2021-11-15 10:24                                 ` Ferruh Yigit
2021-11-15 11:15                                   ` Ferruh Yigit
2021-11-15  7:19                             ` [PATCH v11 4/5] net/enetfec: add Rx/Tx support Apeksha Gupta
2021-11-15  7:19                             ` [PATCH v11 5/5] net/enetfec: add features Apeksha Gupta
2021-11-15  9:44                             ` [PATCH v11 0/5] drivers/net: add NXP ENETFEC driver Ferruh Yigit
2021-11-15 15:05                             ` Ferruh Yigit
2021-11-25 16:52                               ` Ferruh Yigit
2021-11-13  4:31                         ` [PATCH v10 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-11-13  4:31                         ` [PATCH v10 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-11-13 17:11                           ` Stephen Hemminger
2021-11-13  4:31                         ` [PATCH v10 4/5] net/enetfec: add Rx/Tx support Apeksha Gupta
2021-11-13 17:10                           ` Stephen Hemminger
2021-11-13  4:31                         ` [PATCH v10 5/5] net/enetfec: add features Apeksha Gupta
2021-11-10  7:48                     ` [dpdk-dev] [PATCH v9 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-11-10  7:48                     ` [dpdk-dev] [PATCH v9 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-11-10 13:54                       ` Ferruh Yigit
2021-11-13  5:00                         ` [EXT] " Apeksha Gupta
2021-11-15 10:06                         ` Ferruh Yigit
2021-11-15 10:23                           ` Ferruh Yigit
2021-11-15 10:29                             ` Ferruh Yigit
2021-11-10  7:48                     ` [dpdk-dev] [PATCH v9 4/5] net/enetfec: add Rx/Tx support Apeksha Gupta
2021-11-10 13:56                       ` Ferruh Yigit
2021-11-10  7:48                     ` [dpdk-dev] [PATCH v9 5/5] net/enetfec: add features Apeksha Gupta
2021-11-10 13:57                       ` Ferruh Yigit
2021-11-03 19:20             ` [dpdk-dev] [PATCH v7 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-11-04 18:25               ` Ferruh Yigit
2021-11-08 20:24                 ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-11-08 21:51                   ` Ferruh Yigit
2021-11-03 19:20             ` [dpdk-dev] [PATCH v7 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-11-04 18:26               ` Ferruh Yigit
2021-11-03 19:20             ` [dpdk-dev] [PATCH v7 4/5] net/enetfec: add Rx/Tx support Apeksha Gupta
2021-11-04 18:28               ` Ferruh Yigit
2021-11-09 16:20                 ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-11-03 19:20             ` [dpdk-dev] [PATCH v7 5/5] net/enetfec: add features Apeksha Gupta
2021-11-04 18:31             ` [dpdk-dev] [PATCH v7 0/5] drivers/net: add NXP ENETFEC driver Ferruh Yigit
2021-10-21  4:46         ` [dpdk-dev] [PATCH v6 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-10-27 14:21           ` Ferruh Yigit
2021-11-08 18:44             ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-10-21  4:46         ` [dpdk-dev] [PATCH v6 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-10-27 14:23           ` Ferruh Yigit
2021-11-08 18:45             ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-10-21  4:46         ` [dpdk-dev] [PATCH v6 4/5] net/enetfec: add enqueue and dequeue support Apeksha Gupta
2021-10-27 14:25           ` Ferruh Yigit
2021-11-08 18:47             ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-10-21  4:47         ` [dpdk-dev] [PATCH v6 5/5] net/enetfec: add features Apeksha Gupta
2021-10-27 14:26           ` Ferruh Yigit
2021-10-27 14:15         ` [dpdk-dev] [PATCH v6 0/5] drivers/net: add NXP ENETFEC driver Ferruh Yigit
2021-10-19 18:40     ` [dpdk-dev] [PATCH v5 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-10-19 18:40     ` [dpdk-dev] [PATCH v5 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-10-19 18:40     ` [dpdk-dev] [PATCH v5 4/5] net/enetfec: add enqueue and dequeue support Apeksha Gupta
2021-10-19 18:40     ` [dpdk-dev] [PATCH v5 5/5] net/enetfec: add features Apeksha Gupta
2021-10-01 11:42 ` [dpdk-dev] [PATCH v4 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-10-01 11:42 ` [dpdk-dev] [PATCH v4 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-10-01 11:42 ` [dpdk-dev] [PATCH v4 4/5] net/enetfec: add enqueue and dequeue support Apeksha Gupta
2021-10-01 11:42 ` [dpdk-dev] [PATCH v4 5/5] net/enetfec: add features Apeksha Gupta
2021-10-17 10:49 ` [dpdk-dev] [PATCH v4 0/5] drivers/net: add NXP ENETFEC driver Apeksha Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211021044700.12370-2-apeksha.gupta@nxp.com \
    --to=apeksha.gupta@nxp.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=sachin.saxena@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).