DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v2 25/26] net/ngbe: add Rx and Tx descriptor status
Date: Thu, 21 Oct 2021 17:50:22 +0800	[thread overview]
Message-ID: <20211021095023.18288-26-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20211021095023.18288-1-jiawenwu@trustnetic.com>

Supports to get the number of used Rx descriptos,
and check the status of Rx and Tx descriptors.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 doc/guides/nics/features/ngbe.ini |  2 +
 drivers/net/ngbe/ngbe_ethdev.c    |  3 ++
 drivers/net/ngbe/ngbe_ethdev.h    |  6 +++
 drivers/net/ngbe/ngbe_rxtx.c      | 73 +++++++++++++++++++++++++++++++
 4 files changed, 84 insertions(+)

diff --git a/doc/guides/nics/features/ngbe.ini b/doc/guides/nics/features/ngbe.ini
index 03f0873443..38e8c7178d 100644
--- a/doc/guides/nics/features/ngbe.ini
+++ b/doc/guides/nics/features/ngbe.ini
@@ -32,6 +32,8 @@ Inner L3 checksum    = Y
 Inner L4 checksum    = Y
 Packet type parsing  = Y
 Timesync             = Y
+Rx descriptor status = Y
+Tx descriptor status = Y
 Basic stats          = Y
 Extended stats       = Y
 Stats per queue      = Y
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 2f83c2e2fc..706227339f 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -320,6 +320,9 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 	PMD_INIT_FUNC_TRACE();
 
 	eth_dev->dev_ops = &ngbe_eth_dev_ops;
+	eth_dev->rx_queue_count       = ngbe_dev_rx_queue_count;
+	eth_dev->rx_descriptor_status = ngbe_dev_rx_descriptor_status;
+	eth_dev->tx_descriptor_status = ngbe_dev_tx_descriptor_status;
 	eth_dev->rx_pkt_burst = &ngbe_recv_pkts;
 	eth_dev->tx_pkt_burst = &ngbe_xmit_pkts;
 	eth_dev->tx_pkt_prepare = &ngbe_prep_pkts;
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index 527b0b3be0..02e9c1c913 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -202,6 +202,12 @@ int  ngbe_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
 		uint16_t nb_tx_desc, unsigned int socket_id,
 		const struct rte_eth_txconf *tx_conf);
 
+uint32_t ngbe_dev_rx_queue_count(struct rte_eth_dev *dev,
+		uint16_t rx_queue_id);
+
+int ngbe_dev_rx_descriptor_status(void *rx_queue, uint16_t offset);
+int ngbe_dev_tx_descriptor_status(void *tx_queue, uint16_t offset);
+
 int ngbe_dev_rx_init(struct rte_eth_dev *dev);
 
 void ngbe_dev_tx_init(struct rte_eth_dev *dev);
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index 36d6ec1992..e1a999a470 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -2285,6 +2285,79 @@ ngbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
 	return 0;
 }
 
+uint32_t
+ngbe_dev_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id)
+{
+#define NGBE_RXQ_SCAN_INTERVAL 4
+	volatile struct ngbe_rx_desc *rxdp;
+	struct ngbe_rx_queue *rxq;
+	uint32_t desc = 0;
+
+	rxq = dev->data->rx_queues[rx_queue_id];
+	rxdp = &rxq->rx_ring[rxq->rx_tail];
+
+	while ((desc < rxq->nb_rx_desc) &&
+		(rxdp->qw1.lo.status &
+			rte_cpu_to_le_32(NGBE_RXD_STAT_DD))) {
+		desc += NGBE_RXQ_SCAN_INTERVAL;
+		rxdp += NGBE_RXQ_SCAN_INTERVAL;
+		if (rxq->rx_tail + desc >= rxq->nb_rx_desc)
+			rxdp = &(rxq->rx_ring[rxq->rx_tail +
+				desc - rxq->nb_rx_desc]);
+	}
+
+	return desc;
+}
+
+int
+ngbe_dev_rx_descriptor_status(void *rx_queue, uint16_t offset)
+{
+	struct ngbe_rx_queue *rxq = rx_queue;
+	volatile uint32_t *status;
+	uint32_t nb_hold, desc;
+
+	if (unlikely(offset >= rxq->nb_rx_desc))
+		return -EINVAL;
+
+	nb_hold = rxq->nb_rx_hold;
+	if (offset >= rxq->nb_rx_desc - nb_hold)
+		return RTE_ETH_RX_DESC_UNAVAIL;
+
+	desc = rxq->rx_tail + offset;
+	if (desc >= rxq->nb_rx_desc)
+		desc -= rxq->nb_rx_desc;
+
+	status = &rxq->rx_ring[desc].qw1.lo.status;
+	if (*status & rte_cpu_to_le_32(NGBE_RXD_STAT_DD))
+		return RTE_ETH_RX_DESC_DONE;
+
+	return RTE_ETH_RX_DESC_AVAIL;
+}
+
+int
+ngbe_dev_tx_descriptor_status(void *tx_queue, uint16_t offset)
+{
+	struct ngbe_tx_queue *txq = tx_queue;
+	volatile uint32_t *status;
+	uint32_t desc;
+
+	if (unlikely(offset >= txq->nb_tx_desc))
+		return -EINVAL;
+
+	desc = txq->tx_tail + offset;
+	if (desc >= txq->nb_tx_desc) {
+		desc -= txq->nb_tx_desc;
+		if (desc >= txq->nb_tx_desc)
+			desc -= txq->nb_tx_desc;
+	}
+
+	status = &txq->tx_ring[desc].dw3;
+	if (*status & rte_cpu_to_le_32(NGBE_TXD_DD))
+		return RTE_ETH_TX_DESC_DONE;
+
+	return RTE_ETH_TX_DESC_FULL;
+}
+
 void
 ngbe_dev_clear_queues(struct rte_eth_dev *dev)
 {
-- 
2.21.0.windows.1




  parent reply	other threads:[~2021-10-21  9:54 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-21  9:49 [dpdk-dev] [PATCH v2 00/26] net/ngbe: add many features Jiawen Wu
2021-10-21  9:49 ` [dpdk-dev] [PATCH v2 01/26] net/ngbe: add packet type Jiawen Wu
2021-10-21  9:49 ` [dpdk-dev] [PATCH v2 02/26] net/ngbe: support scattered Rx Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 03/26] net/ngbe: support Rx checksum offload Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 04/26] net/ngbe: support TSO Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 05/26] net/ngbe: support Rx/Tx burst mode info Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 06/26] net/ngbe: support CRC offload Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 07/26] net/ngbe: support jumbo frame Jiawen Wu
2021-10-29 22:17   ` Ferruh Yigit
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 08/26] net/ngbe: support VLAN offload and VLAN filter Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 09/26] net/ngbe: support basic statistics Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 10/26] net/ngbe: support device xstats Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 11/26] net/ngbe: support MTU set Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 12/26] net/ngbe: add device promiscuous and allmulticast mode Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 13/26] net/ngbe: support getting FW version Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 14/26] net/ngbe: add loopback mode Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 15/26] net/ngbe: support MAC filters Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 16/26] net/ngbe: support RSS hash Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 17/26] net/ngbe: support SRIOV Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 18/26] net/ngbe: add mailbox process operations Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 19/26] net/ngbe: support flow control Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 20/26] net/ngbe: support device LED on and off Jiawen Wu
2021-10-29 22:20   ` Ferruh Yigit
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 21/26] net/ngbe: support EEPROM dump Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 22/26] net/ngbe: support register dump Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 23/26] net/ngbe: support timesync Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 24/26] net/ngbe: add Rx and Tx queue info get Jiawen Wu
2021-10-21  9:50 ` Jiawen Wu [this message]
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 26/26] net/ngbe: add Tx done cleanup Jiawen Wu
2021-10-29 22:24   ` Ferruh Yigit
2021-10-29 22:15 ` [dpdk-dev] [PATCH v2 00/26] net/ngbe: add many features Ferruh Yigit
2021-10-29 22:55   ` Ferruh Yigit
2021-11-01  2:08   ` Jiawen Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211021095023.18288-26-jiawenwu@trustnetic.com \
    --to=jiawenwu@trustnetic.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).