DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v2 04/26] net/ngbe: support TSO
Date: Thu, 21 Oct 2021 17:50:01 +0800	[thread overview]
Message-ID: <20211021095023.18288-5-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20211021095023.18288-1-jiawenwu@trustnetic.com>

Add transmit datapath with offloads, and support TCP segmentation
offload.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 doc/guides/nics/features/ngbe.ini |   3 +
 doc/guides/nics/ngbe.rst          |   3 +-
 drivers/net/ngbe/ngbe_ethdev.c    |  19 +-
 drivers/net/ngbe/ngbe_ethdev.h    |   6 +
 drivers/net/ngbe/ngbe_rxtx.c      | 679 ++++++++++++++++++++++++++++++
 drivers/net/ngbe/ngbe_rxtx.h      |  58 +++
 6 files changed, 766 insertions(+), 2 deletions(-)

diff --git a/doc/guides/nics/features/ngbe.ini b/doc/guides/nics/features/ngbe.ini
index 80c71df0bc..d23e7f084f 100644
--- a/doc/guides/nics/features/ngbe.ini
+++ b/doc/guides/nics/features/ngbe.ini
@@ -9,8 +9,11 @@ Link status          = Y
 Link status event    = Y
 Queue start/stop     = Y
 Scattered Rx         = Y
+TSO                  = Y
 L3 checksum offload  = Y
 L4 checksum offload  = Y
+Inner L3 checksum    = Y
+Inner L4 checksum    = Y
 Packet type parsing  = Y
 Multiprocess aware   = Y
 Linux                = Y
diff --git a/doc/guides/nics/ngbe.rst b/doc/guides/nics/ngbe.rst
index 0a14252ff2..6a6ae39243 100644
--- a/doc/guides/nics/ngbe.rst
+++ b/doc/guides/nics/ngbe.rst
@@ -13,8 +13,9 @@ Features
 
 - Packet type information
 - Checksum offload
+- TSO offload
 - Link state information
-- Scattered for RX
+- Scattered and gather for TX and RX
 
 
 Prerequisites
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 03a07d6cad..ce3f254e33 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -138,7 +138,8 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 
 	eth_dev->dev_ops = &ngbe_eth_dev_ops;
 	eth_dev->rx_pkt_burst = &ngbe_recv_pkts;
-	eth_dev->tx_pkt_burst = &ngbe_xmit_pkts_simple;
+	eth_dev->tx_pkt_burst = &ngbe_xmit_pkts;
+	eth_dev->tx_pkt_prepare = &ngbe_prep_pkts;
 
 	/*
 	 * For secondary processes, we don't initialise any further as primary
@@ -146,6 +147,20 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 	 * Rx and Tx function.
 	 */
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+		struct ngbe_tx_queue *txq;
+		/* Tx queue function in primary, set by last queue initialized
+		 * Tx queue may not initialized by primary process
+		 */
+		if (eth_dev->data->tx_queues) {
+			uint16_t nb_tx_queues = eth_dev->data->nb_tx_queues;
+			txq = eth_dev->data->tx_queues[nb_tx_queues - 1];
+			ngbe_set_tx_function(eth_dev, txq);
+		} else {
+			/* Use default Tx function if we get here */
+			PMD_INIT_LOG(NOTICE,
+				"No Tx queues configured yet. Using default Tx function.");
+		}
+
 		ngbe_set_rx_function(eth_dev);
 
 		return 0;
@@ -641,6 +656,8 @@ ngbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 	dev_info->max_rx_pktlen = 15872;
 	dev_info->rx_offload_capa = (ngbe_get_rx_port_offloads(dev) |
 				     dev_info->rx_queue_offload_capa);
+	dev_info->tx_queue_offload_capa = 0;
+	dev_info->tx_offload_capa = ngbe_get_tx_port_offloads(dev);
 
 	dev_info->default_rxconf = (struct rte_eth_rxconf) {
 		.rx_thresh = {
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index 80da1938c9..7b085f070f 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -114,9 +114,15 @@ uint16_t ngbe_recv_pkts_sc_single_alloc(void *rx_queue,
 uint16_t ngbe_recv_pkts_sc_bulk_alloc(void *rx_queue,
 		struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
 
+uint16_t ngbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+		uint16_t nb_pkts);
+
 uint16_t ngbe_xmit_pkts_simple(void *tx_queue, struct rte_mbuf **tx_pkts,
 		uint16_t nb_pkts);
 
+uint16_t ngbe_prep_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+		uint16_t nb_pkts);
+
 void ngbe_set_ivar_map(struct ngbe_hw *hw, int8_t direction,
 			       uint8_t queue, uint8_t msix_vector);
 
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index d3fcd1c23d..d6a5b1d895 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -9,12 +9,26 @@
 #include <rte_ethdev.h>
 #include <ethdev_driver.h>
 #include <rte_malloc.h>
+#include <rte_net.h>
 
 #include "ngbe_logs.h"
 #include "base/ngbe.h"
 #include "ngbe_ethdev.h"
 #include "ngbe_rxtx.h"
 
+/* Bit Mask to indicate what bits required for building Tx context */
+static const u64 NGBE_TX_OFFLOAD_MASK = (PKT_TX_IP_CKSUM |
+		PKT_TX_OUTER_IPV6 |
+		PKT_TX_OUTER_IPV4 |
+		PKT_TX_IPV6 |
+		PKT_TX_IPV4 |
+		PKT_TX_L4_MASK |
+		PKT_TX_TCP_SEG |
+		PKT_TX_TUNNEL_MASK |
+		PKT_TX_OUTER_IP_CKSUM);
+#define NGBE_TX_OFFLOAD_NOTSUP_MASK \
+		(PKT_TX_OFFLOAD_MASK ^ NGBE_TX_OFFLOAD_MASK)
+
 /*
  * Prefetch a cache line into all cache levels.
  */
@@ -248,6 +262,614 @@ ngbe_xmit_pkts_simple(void *tx_queue, struct rte_mbuf **tx_pkts,
 	return nb_tx;
 }
 
+static inline void
+ngbe_set_xmit_ctx(struct ngbe_tx_queue *txq,
+		volatile struct ngbe_tx_ctx_desc *ctx_txd,
+		uint64_t ol_flags, union ngbe_tx_offload tx_offload)
+{
+	union ngbe_tx_offload tx_offload_mask;
+	uint32_t type_tucmd_mlhl;
+	uint32_t mss_l4len_idx;
+	uint32_t ctx_idx;
+	uint32_t vlan_macip_lens;
+	uint32_t tunnel_seed;
+
+	ctx_idx = txq->ctx_curr;
+	tx_offload_mask.data[0] = 0;
+	tx_offload_mask.data[1] = 0;
+
+	/* Specify which HW CTX to upload. */
+	mss_l4len_idx = NGBE_TXD_IDX(ctx_idx);
+	type_tucmd_mlhl = NGBE_TXD_CTXT;
+
+	tx_offload_mask.ptid |= ~0;
+	type_tucmd_mlhl |= NGBE_TXD_PTID(tx_offload.ptid);
+
+	/* check if TCP segmentation required for this packet */
+	if (ol_flags & PKT_TX_TCP_SEG) {
+		tx_offload_mask.l2_len |= ~0;
+		tx_offload_mask.l3_len |= ~0;
+		tx_offload_mask.l4_len |= ~0;
+		tx_offload_mask.tso_segsz |= ~0;
+		mss_l4len_idx |= NGBE_TXD_MSS(tx_offload.tso_segsz);
+		mss_l4len_idx |= NGBE_TXD_L4LEN(tx_offload.l4_len);
+	} else { /* no TSO, check if hardware checksum is needed */
+		if (ol_flags & PKT_TX_IP_CKSUM) {
+			tx_offload_mask.l2_len |= ~0;
+			tx_offload_mask.l3_len |= ~0;
+		}
+
+		switch (ol_flags & PKT_TX_L4_MASK) {
+		case PKT_TX_UDP_CKSUM:
+			mss_l4len_idx |=
+				NGBE_TXD_L4LEN(sizeof(struct rte_udp_hdr));
+			tx_offload_mask.l2_len |= ~0;
+			tx_offload_mask.l3_len |= ~0;
+			break;
+		case PKT_TX_TCP_CKSUM:
+			mss_l4len_idx |=
+				NGBE_TXD_L4LEN(sizeof(struct rte_tcp_hdr));
+			tx_offload_mask.l2_len |= ~0;
+			tx_offload_mask.l3_len |= ~0;
+			break;
+		case PKT_TX_SCTP_CKSUM:
+			mss_l4len_idx |=
+				NGBE_TXD_L4LEN(sizeof(struct rte_sctp_hdr));
+			tx_offload_mask.l2_len |= ~0;
+			tx_offload_mask.l3_len |= ~0;
+			break;
+		default:
+			break;
+		}
+	}
+
+	vlan_macip_lens = NGBE_TXD_IPLEN(tx_offload.l3_len >> 1);
+
+	if (ol_flags & PKT_TX_TUNNEL_MASK) {
+		tx_offload_mask.outer_tun_len |= ~0;
+		tx_offload_mask.outer_l2_len |= ~0;
+		tx_offload_mask.outer_l3_len |= ~0;
+		tx_offload_mask.l2_len |= ~0;
+		tunnel_seed = NGBE_TXD_ETUNLEN(tx_offload.outer_tun_len >> 1);
+		tunnel_seed |= NGBE_TXD_EIPLEN(tx_offload.outer_l3_len >> 2);
+
+		switch (ol_flags & PKT_TX_TUNNEL_MASK) {
+		case PKT_TX_TUNNEL_IPIP:
+			/* for non UDP / GRE tunneling, set to 0b */
+			break;
+		default:
+			PMD_TX_LOG(ERR, "Tunnel type not supported");
+			return;
+		}
+		vlan_macip_lens |= NGBE_TXD_MACLEN(tx_offload.outer_l2_len);
+	} else {
+		tunnel_seed = 0;
+		vlan_macip_lens |= NGBE_TXD_MACLEN(tx_offload.l2_len);
+	}
+
+	txq->ctx_cache[ctx_idx].flags = ol_flags;
+	txq->ctx_cache[ctx_idx].tx_offload.data[0] =
+		tx_offload_mask.data[0] & tx_offload.data[0];
+	txq->ctx_cache[ctx_idx].tx_offload.data[1] =
+		tx_offload_mask.data[1] & tx_offload.data[1];
+	txq->ctx_cache[ctx_idx].tx_offload_mask = tx_offload_mask;
+
+	ctx_txd->dw0 = rte_cpu_to_le_32(vlan_macip_lens);
+	ctx_txd->dw1 = rte_cpu_to_le_32(tunnel_seed);
+	ctx_txd->dw2 = rte_cpu_to_le_32(type_tucmd_mlhl);
+	ctx_txd->dw3 = rte_cpu_to_le_32(mss_l4len_idx);
+}
+
+/*
+ * Check which hardware context can be used. Use the existing match
+ * or create a new context descriptor.
+ */
+static inline uint32_t
+what_ctx_update(struct ngbe_tx_queue *txq, uint64_t flags,
+		   union ngbe_tx_offload tx_offload)
+{
+	/* If match with the current used context */
+	if (likely(txq->ctx_cache[txq->ctx_curr].flags == flags &&
+		   (txq->ctx_cache[txq->ctx_curr].tx_offload.data[0] ==
+		    (txq->ctx_cache[txq->ctx_curr].tx_offload_mask.data[0]
+		     & tx_offload.data[0])) &&
+		   (txq->ctx_cache[txq->ctx_curr].tx_offload.data[1] ==
+		    (txq->ctx_cache[txq->ctx_curr].tx_offload_mask.data[1]
+		     & tx_offload.data[1]))))
+		return txq->ctx_curr;
+
+	/* What if match with the next context  */
+	txq->ctx_curr ^= 1;
+	if (likely(txq->ctx_cache[txq->ctx_curr].flags == flags &&
+		   (txq->ctx_cache[txq->ctx_curr].tx_offload.data[0] ==
+		    (txq->ctx_cache[txq->ctx_curr].tx_offload_mask.data[0]
+		     & tx_offload.data[0])) &&
+		   (txq->ctx_cache[txq->ctx_curr].tx_offload.data[1] ==
+		    (txq->ctx_cache[txq->ctx_curr].tx_offload_mask.data[1]
+		     & tx_offload.data[1]))))
+		return txq->ctx_curr;
+
+	/* Mismatch, use the previous context */
+	return NGBE_CTX_NUM;
+}
+
+static inline uint32_t
+tx_desc_cksum_flags_to_olinfo(uint64_t ol_flags)
+{
+	uint32_t tmp = 0;
+
+	if ((ol_flags & PKT_TX_L4_MASK) != PKT_TX_L4_NO_CKSUM) {
+		tmp |= NGBE_TXD_CC;
+		tmp |= NGBE_TXD_L4CS;
+	}
+	if (ol_flags & PKT_TX_IP_CKSUM) {
+		tmp |= NGBE_TXD_CC;
+		tmp |= NGBE_TXD_IPCS;
+	}
+	if (ol_flags & PKT_TX_OUTER_IP_CKSUM) {
+		tmp |= NGBE_TXD_CC;
+		tmp |= NGBE_TXD_EIPCS;
+	}
+	if (ol_flags & PKT_TX_TCP_SEG) {
+		tmp |= NGBE_TXD_CC;
+		/* implies IPv4 cksum */
+		if (ol_flags & PKT_TX_IPV4)
+			tmp |= NGBE_TXD_IPCS;
+		tmp |= NGBE_TXD_L4CS;
+	}
+
+	return tmp;
+}
+
+static inline uint32_t
+tx_desc_ol_flags_to_cmdtype(uint64_t ol_flags)
+{
+	uint32_t cmdtype = 0;
+
+	if (ol_flags & PKT_TX_TCP_SEG)
+		cmdtype |= NGBE_TXD_TSE;
+	return cmdtype;
+}
+
+static inline uint8_t
+tx_desc_ol_flags_to_ptid(uint64_t oflags, uint32_t ptype)
+{
+	bool tun;
+
+	if (ptype)
+		return ngbe_encode_ptype(ptype);
+
+	/* Only support flags in NGBE_TX_OFFLOAD_MASK */
+	tun = !!(oflags & PKT_TX_TUNNEL_MASK);
+
+	/* L2 level */
+	ptype = RTE_PTYPE_L2_ETHER;
+
+	/* L3 level */
+	if (oflags & (PKT_TX_OUTER_IPV4 | PKT_TX_OUTER_IP_CKSUM))
+		ptype |= RTE_PTYPE_L3_IPV4;
+	else if (oflags & (PKT_TX_OUTER_IPV6))
+		ptype |= RTE_PTYPE_L3_IPV6;
+
+	if (oflags & (PKT_TX_IPV4 | PKT_TX_IP_CKSUM))
+		ptype |= (tun ? RTE_PTYPE_INNER_L3_IPV4 : RTE_PTYPE_L3_IPV4);
+	else if (oflags & (PKT_TX_IPV6))
+		ptype |= (tun ? RTE_PTYPE_INNER_L3_IPV6 : RTE_PTYPE_L3_IPV6);
+
+	/* L4 level */
+	switch (oflags & (PKT_TX_L4_MASK)) {
+	case PKT_TX_TCP_CKSUM:
+		ptype |= (tun ? RTE_PTYPE_INNER_L4_TCP : RTE_PTYPE_L4_TCP);
+		break;
+	case PKT_TX_UDP_CKSUM:
+		ptype |= (tun ? RTE_PTYPE_INNER_L4_UDP : RTE_PTYPE_L4_UDP);
+		break;
+	case PKT_TX_SCTP_CKSUM:
+		ptype |= (tun ? RTE_PTYPE_INNER_L4_SCTP : RTE_PTYPE_L4_SCTP);
+		break;
+	}
+
+	if (oflags & PKT_TX_TCP_SEG)
+		ptype |= (tun ? RTE_PTYPE_INNER_L4_TCP : RTE_PTYPE_L4_TCP);
+
+	/* Tunnel */
+	switch (oflags & PKT_TX_TUNNEL_MASK) {
+	case PKT_TX_TUNNEL_IPIP:
+	case PKT_TX_TUNNEL_IP:
+		ptype |= RTE_PTYPE_L2_ETHER |
+			 RTE_PTYPE_L3_IPV4 |
+			 RTE_PTYPE_TUNNEL_IP;
+		break;
+	}
+
+	return ngbe_encode_ptype(ptype);
+}
+
+/* Reset transmit descriptors after they have been used */
+static inline int
+ngbe_xmit_cleanup(struct ngbe_tx_queue *txq)
+{
+	struct ngbe_tx_entry *sw_ring = txq->sw_ring;
+	volatile struct ngbe_tx_desc *txr = txq->tx_ring;
+	uint16_t last_desc_cleaned = txq->last_desc_cleaned;
+	uint16_t nb_tx_desc = txq->nb_tx_desc;
+	uint16_t desc_to_clean_to;
+	uint16_t nb_tx_to_clean;
+	uint32_t status;
+
+	/* Determine the last descriptor needing to be cleaned */
+	desc_to_clean_to = (uint16_t)(last_desc_cleaned + txq->tx_free_thresh);
+	if (desc_to_clean_to >= nb_tx_desc)
+		desc_to_clean_to = (uint16_t)(desc_to_clean_to - nb_tx_desc);
+
+	/* Check to make sure the last descriptor to clean is done */
+	desc_to_clean_to = sw_ring[desc_to_clean_to].last_id;
+	status = txr[desc_to_clean_to].dw3;
+	if (!(status & rte_cpu_to_le_32(NGBE_TXD_DD))) {
+		PMD_TX_LOG(DEBUG,
+			"Tx descriptor %4u is not done"
+			"(port=%d queue=%d)",
+			desc_to_clean_to,
+			txq->port_id, txq->queue_id);
+		if (txq->nb_tx_free >> 1 < txq->tx_free_thresh)
+			ngbe_set32_masked(txq->tdc_reg_addr,
+				NGBE_TXCFG_FLUSH, NGBE_TXCFG_FLUSH);
+		/* Failed to clean any descriptors, better luck next time */
+		return -(1);
+	}
+
+	/* Figure out how many descriptors will be cleaned */
+	if (last_desc_cleaned > desc_to_clean_to)
+		nb_tx_to_clean = (uint16_t)((nb_tx_desc - last_desc_cleaned) +
+							desc_to_clean_to);
+	else
+		nb_tx_to_clean = (uint16_t)(desc_to_clean_to -
+						last_desc_cleaned);
+
+	PMD_TX_LOG(DEBUG,
+		"Cleaning %4u Tx descriptors: %4u to %4u (port=%d queue=%d)",
+		nb_tx_to_clean, last_desc_cleaned, desc_to_clean_to,
+		txq->port_id, txq->queue_id);
+
+	/*
+	 * The last descriptor to clean is done, so that means all the
+	 * descriptors from the last descriptor that was cleaned
+	 * up to the last descriptor with the RS bit set
+	 * are done. Only reset the threshold descriptor.
+	 */
+	txr[desc_to_clean_to].dw3 = 0;
+
+	/* Update the txq to reflect the last descriptor that was cleaned */
+	txq->last_desc_cleaned = desc_to_clean_to;
+	txq->nb_tx_free = (uint16_t)(txq->nb_tx_free + nb_tx_to_clean);
+
+	/* No Error */
+	return 0;
+}
+
+uint16_t
+ngbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+		uint16_t nb_pkts)
+{
+	struct ngbe_tx_queue *txq;
+	struct ngbe_tx_entry *sw_ring;
+	struct ngbe_tx_entry *txe, *txn;
+	volatile struct ngbe_tx_desc *txr;
+	volatile struct ngbe_tx_desc *txd;
+	struct rte_mbuf     *tx_pkt;
+	struct rte_mbuf     *m_seg;
+	uint64_t buf_dma_addr;
+	uint32_t olinfo_status;
+	uint32_t cmd_type_len;
+	uint32_t pkt_len;
+	uint16_t slen;
+	uint64_t ol_flags;
+	uint16_t tx_id;
+	uint16_t tx_last;
+	uint16_t nb_tx;
+	uint16_t nb_used;
+	uint64_t tx_ol_req;
+	uint32_t ctx = 0;
+	uint32_t new_ctx;
+	union ngbe_tx_offload tx_offload;
+
+	tx_offload.data[0] = 0;
+	tx_offload.data[1] = 0;
+	txq = tx_queue;
+	sw_ring = txq->sw_ring;
+	txr     = txq->tx_ring;
+	tx_id   = txq->tx_tail;
+	txe = &sw_ring[tx_id];
+
+	/* Determine if the descriptor ring needs to be cleaned. */
+	if (txq->nb_tx_free < txq->tx_free_thresh)
+		ngbe_xmit_cleanup(txq);
+
+	rte_prefetch0(&txe->mbuf->pool);
+
+	/* Tx loop */
+	for (nb_tx = 0; nb_tx < nb_pkts; nb_tx++) {
+		new_ctx = 0;
+		tx_pkt = *tx_pkts++;
+		pkt_len = tx_pkt->pkt_len;
+
+		/*
+		 * Determine how many (if any) context descriptors
+		 * are needed for offload functionality.
+		 */
+		ol_flags = tx_pkt->ol_flags;
+
+		/* If hardware offload required */
+		tx_ol_req = ol_flags & NGBE_TX_OFFLOAD_MASK;
+		if (tx_ol_req) {
+			tx_offload.ptid = tx_desc_ol_flags_to_ptid(tx_ol_req,
+					tx_pkt->packet_type);
+			tx_offload.l2_len = tx_pkt->l2_len;
+			tx_offload.l3_len = tx_pkt->l3_len;
+			tx_offload.l4_len = tx_pkt->l4_len;
+			tx_offload.tso_segsz = tx_pkt->tso_segsz;
+			tx_offload.outer_l2_len = tx_pkt->outer_l2_len;
+			tx_offload.outer_l3_len = tx_pkt->outer_l3_len;
+			tx_offload.outer_tun_len = 0;
+
+			/* If new context need be built or reuse the exist ctx*/
+			ctx = what_ctx_update(txq, tx_ol_req, tx_offload);
+			/* Only allocate context descriptor if required */
+			new_ctx = (ctx == NGBE_CTX_NUM);
+			ctx = txq->ctx_curr;
+		}
+
+		/*
+		 * Keep track of how many descriptors are used this loop
+		 * This will always be the number of segments + the number of
+		 * Context descriptors required to transmit the packet
+		 */
+		nb_used = (uint16_t)(tx_pkt->nb_segs + new_ctx);
+
+		/*
+		 * The number of descriptors that must be allocated for a
+		 * packet is the number of segments of that packet, plus 1
+		 * Context Descriptor for the hardware offload, if any.
+		 * Determine the last Tx descriptor to allocate in the Tx ring
+		 * for the packet, starting from the current position (tx_id)
+		 * in the ring.
+		 */
+		tx_last = (uint16_t)(tx_id + nb_used - 1);
+
+		/* Circular ring */
+		if (tx_last >= txq->nb_tx_desc)
+			tx_last = (uint16_t)(tx_last - txq->nb_tx_desc);
+
+		PMD_TX_LOG(DEBUG, "port_id=%u queue_id=%u pktlen=%u"
+			   " tx_first=%u tx_last=%u",
+			   (uint16_t)txq->port_id,
+			   (uint16_t)txq->queue_id,
+			   (uint32_t)pkt_len,
+			   (uint16_t)tx_id,
+			   (uint16_t)tx_last);
+
+		/*
+		 * Make sure there are enough Tx descriptors available to
+		 * transmit the entire packet.
+		 * nb_used better be less than or equal to txq->tx_free_thresh
+		 */
+		if (nb_used > txq->nb_tx_free) {
+			PMD_TX_LOG(DEBUG,
+				"Not enough free Tx descriptors "
+				"nb_used=%4u nb_free=%4u "
+				"(port=%d queue=%d)",
+				nb_used, txq->nb_tx_free,
+				txq->port_id, txq->queue_id);
+
+			if (ngbe_xmit_cleanup(txq) != 0) {
+				/* Could not clean any descriptors */
+				if (nb_tx == 0)
+					return 0;
+				goto end_of_tx;
+			}
+
+			/* nb_used better be <= txq->tx_free_thresh */
+			if (unlikely(nb_used > txq->tx_free_thresh)) {
+				PMD_TX_LOG(DEBUG,
+					"The number of descriptors needed to "
+					"transmit the packet exceeds the "
+					"RS bit threshold. This will impact "
+					"performance."
+					"nb_used=%4u nb_free=%4u "
+					"tx_free_thresh=%4u. "
+					"(port=%d queue=%d)",
+					nb_used, txq->nb_tx_free,
+					txq->tx_free_thresh,
+					txq->port_id, txq->queue_id);
+				/*
+				 * Loop here until there are enough Tx
+				 * descriptors or until the ring cannot be
+				 * cleaned.
+				 */
+				while (nb_used > txq->nb_tx_free) {
+					if (ngbe_xmit_cleanup(txq) != 0) {
+						/*
+						 * Could not clean any
+						 * descriptors
+						 */
+						if (nb_tx == 0)
+							return 0;
+						goto end_of_tx;
+					}
+				}
+			}
+		}
+
+		/*
+		 * By now there are enough free Tx descriptors to transmit
+		 * the packet.
+		 */
+
+		/*
+		 * Set common flags of all Tx Data Descriptors.
+		 *
+		 * The following bits must be set in the first Data Descriptor
+		 * and are ignored in the other ones:
+		 *   - NGBE_TXD_FCS
+		 *
+		 * The following bits must only be set in the last Data
+		 * Descriptor:
+		 *   - NGBE_TXD_EOP
+		 */
+		cmd_type_len = NGBE_TXD_FCS;
+
+		olinfo_status = 0;
+		if (tx_ol_req) {
+			if (ol_flags & PKT_TX_TCP_SEG) {
+				/* when TSO is on, paylen in descriptor is the
+				 * not the packet len but the tcp payload len
+				 */
+				pkt_len -= (tx_offload.l2_len +
+					tx_offload.l3_len + tx_offload.l4_len);
+				pkt_len -=
+					(tx_pkt->ol_flags & PKT_TX_TUNNEL_MASK)
+					? tx_offload.outer_l2_len +
+					  tx_offload.outer_l3_len : 0;
+			}
+
+			/*
+			 * Setup the Tx Context Descriptor if required
+			 */
+			if (new_ctx) {
+				volatile struct ngbe_tx_ctx_desc *ctx_txd;
+
+				ctx_txd = (volatile struct ngbe_tx_ctx_desc *)
+				    &txr[tx_id];
+
+				txn = &sw_ring[txe->next_id];
+				rte_prefetch0(&txn->mbuf->pool);
+
+				if (txe->mbuf != NULL) {
+					rte_pktmbuf_free_seg(txe->mbuf);
+					txe->mbuf = NULL;
+				}
+
+				ngbe_set_xmit_ctx(txq, ctx_txd, tx_ol_req,
+					tx_offload);
+
+				txe->last_id = tx_last;
+				tx_id = txe->next_id;
+				txe = txn;
+			}
+
+			/*
+			 * Setup the Tx Data Descriptor,
+			 * This path will go through
+			 * whatever new/reuse the context descriptor
+			 */
+			cmd_type_len  |= tx_desc_ol_flags_to_cmdtype(ol_flags);
+			olinfo_status |=
+				tx_desc_cksum_flags_to_olinfo(ol_flags);
+			olinfo_status |= NGBE_TXD_IDX(ctx);
+		}
+
+		olinfo_status |= NGBE_TXD_PAYLEN(pkt_len);
+
+		m_seg = tx_pkt;
+		do {
+			txd = &txr[tx_id];
+			txn = &sw_ring[txe->next_id];
+			rte_prefetch0(&txn->mbuf->pool);
+
+			if (txe->mbuf != NULL)
+				rte_pktmbuf_free_seg(txe->mbuf);
+			txe->mbuf = m_seg;
+
+			/*
+			 * Set up Transmit Data Descriptor.
+			 */
+			slen = m_seg->data_len;
+			buf_dma_addr = rte_mbuf_data_iova(m_seg);
+			txd->qw0 = rte_cpu_to_le_64(buf_dma_addr);
+			txd->dw2 = rte_cpu_to_le_32(cmd_type_len | slen);
+			txd->dw3 = rte_cpu_to_le_32(olinfo_status);
+			txe->last_id = tx_last;
+			tx_id = txe->next_id;
+			txe = txn;
+			m_seg = m_seg->next;
+		} while (m_seg != NULL);
+
+		/*
+		 * The last packet data descriptor needs End Of Packet (EOP)
+		 */
+		cmd_type_len |= NGBE_TXD_EOP;
+		txq->nb_tx_free = (uint16_t)(txq->nb_tx_free - nb_used);
+
+		txd->dw2 |= rte_cpu_to_le_32(cmd_type_len);
+	}
+
+end_of_tx:
+
+	rte_wmb();
+
+	/*
+	 * Set the Transmit Descriptor Tail (TDT)
+	 */
+	PMD_TX_LOG(DEBUG, "port_id=%u queue_id=%u tx_tail=%u nb_tx=%u",
+		   (uint16_t)txq->port_id, (uint16_t)txq->queue_id,
+		   (uint16_t)tx_id, (uint16_t)nb_tx);
+	ngbe_set32_relaxed(txq->tdt_reg_addr, tx_id);
+	txq->tx_tail = tx_id;
+
+	return nb_tx;
+}
+
+/*********************************************************************
+ *
+ *  Tx prep functions
+ *
+ **********************************************************************/
+uint16_t
+ngbe_prep_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+	int i, ret;
+	uint64_t ol_flags;
+	struct rte_mbuf *m;
+	struct ngbe_tx_queue *txq = (struct ngbe_tx_queue *)tx_queue;
+
+	for (i = 0; i < nb_pkts; i++) {
+		m = tx_pkts[i];
+		ol_flags = m->ol_flags;
+
+		/**
+		 * Check if packet meets requirements for number of segments
+		 *
+		 * NOTE: for ngbe it's always (40 - WTHRESH) for both TSO and
+		 *       non-TSO
+		 */
+
+		if (m->nb_segs > NGBE_TX_MAX_SEG - txq->wthresh) {
+			rte_errno = -EINVAL;
+			return i;
+		}
+
+		if (ol_flags & NGBE_TX_OFFLOAD_NOTSUP_MASK) {
+			rte_errno = -ENOTSUP;
+			return i;
+		}
+
+#ifdef RTE_ETHDEV_DEBUG_TX
+		ret = rte_validate_tx_offload(m);
+		if (ret != 0) {
+			rte_errno = ret;
+			return i;
+		}
+#endif
+		ret = rte_net_intel_cksum_prepare(m);
+		if (ret != 0) {
+			rte_errno = ret;
+			return i;
+		}
+	}
+
+	return i;
+}
+
 /*********************************************************************
  *
  *  Rx functions
@@ -1040,6 +1662,56 @@ static const struct ngbe_txq_ops def_txq_ops = {
 	.reset = ngbe_reset_tx_queue,
 };
 
+/* Takes an ethdev and a queue and sets up the tx function to be used based on
+ * the queue parameters. Used in tx_queue_setup by primary process and then
+ * in dev_init by secondary process when attaching to an existing ethdev.
+ */
+void
+ngbe_set_tx_function(struct rte_eth_dev *dev, struct ngbe_tx_queue *txq)
+{
+	/* Use a simple Tx queue (no offloads, no multi segs) if possible */
+	if (txq->offloads == 0 &&
+			txq->tx_free_thresh >= RTE_PMD_NGBE_TX_MAX_BURST) {
+		PMD_INIT_LOG(DEBUG, "Using simple tx code path");
+		dev->tx_pkt_burst = ngbe_xmit_pkts_simple;
+		dev->tx_pkt_prepare = NULL;
+	} else {
+		PMD_INIT_LOG(DEBUG, "Using full-featured tx code path");
+		PMD_INIT_LOG(DEBUG,
+				" - offloads = 0x%" PRIx64,
+				txq->offloads);
+		PMD_INIT_LOG(DEBUG,
+				" - tx_free_thresh = %lu [RTE_PMD_NGBE_TX_MAX_BURST=%lu]",
+				(unsigned long)txq->tx_free_thresh,
+				(unsigned long)RTE_PMD_NGBE_TX_MAX_BURST);
+		dev->tx_pkt_burst = ngbe_xmit_pkts;
+		dev->tx_pkt_prepare = ngbe_prep_pkts;
+	}
+}
+
+uint64_t
+ngbe_get_tx_port_offloads(struct rte_eth_dev *dev)
+{
+	uint64_t tx_offload_capa;
+
+	RTE_SET_USED(dev);
+
+	tx_offload_capa =
+		DEV_TX_OFFLOAD_IPV4_CKSUM  |
+		DEV_TX_OFFLOAD_UDP_CKSUM   |
+		DEV_TX_OFFLOAD_TCP_CKSUM   |
+		DEV_TX_OFFLOAD_SCTP_CKSUM  |
+		DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
+		DEV_TX_OFFLOAD_TCP_TSO     |
+		DEV_TX_OFFLOAD_UDP_TSO	   |
+		DEV_TX_OFFLOAD_UDP_TNL_TSO	|
+		DEV_TX_OFFLOAD_IP_TNL_TSO	|
+		DEV_TX_OFFLOAD_IPIP_TNL_TSO	|
+		DEV_TX_OFFLOAD_MULTI_SEGS;
+
+	return tx_offload_capa;
+}
+
 int
 ngbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
 			 uint16_t queue_idx,
@@ -1051,10 +1723,13 @@ ngbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
 	struct ngbe_tx_queue *txq;
 	struct ngbe_hw     *hw;
 	uint16_t tx_free_thresh;
+	uint64_t offloads;
 
 	PMD_INIT_FUNC_TRACE();
 	hw = ngbe_dev_hw(dev);
 
+	offloads = tx_conf->offloads | dev->data->dev_conf.txmode.offloads;
+
 	/*
 	 * The Tx descriptor ring will be cleaned after txq->tx_free_thresh
 	 * descriptors are used or if the number of descriptors required
@@ -1116,6 +1791,7 @@ ngbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
 	txq->queue_id = queue_idx;
 	txq->reg_idx = queue_idx;
 	txq->port_id = dev->data->port_id;
+	txq->offloads = offloads;
 	txq->ops = &def_txq_ops;
 	txq->tx_deferred_start = tx_conf->tx_deferred_start;
 
@@ -1137,6 +1813,9 @@ ngbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
 		     "sw_ring=%p hw_ring=%p dma_addr=0x%" PRIx64,
 		     txq->sw_ring, txq->tx_ring, txq->tx_ring_phys_addr);
 
+	/* set up scalar Tx function as appropriate */
+	ngbe_set_tx_function(dev, txq);
+
 	txq->ops->reset(txq);
 
 	dev->data->tx_queues[queue_idx] = txq;
diff --git a/drivers/net/ngbe/ngbe_rxtx.h b/drivers/net/ngbe/ngbe_rxtx.h
index e59e6c461d..eb86a79760 100644
--- a/drivers/net/ngbe/ngbe_rxtx.h
+++ b/drivers/net/ngbe/ngbe_rxtx.h
@@ -135,8 +135,35 @@ struct ngbe_tx_ctx_desc {
 	rte_le32_t dw3; /* w.mss_l4len_idx    */
 };
 
+/* @ngbe_tx_ctx_desc.dw0 */
+#define NGBE_TXD_IPLEN(v)         LS(v, 0, 0x1FF) /* ip/fcoe header end */
+#define NGBE_TXD_MACLEN(v)        LS(v, 9, 0x7F) /* desc mac len */
+#define NGBE_TXD_VLAN(v)          LS(v, 16, 0xFFFF) /* vlan tag */
+
+/* @ngbe_tx_ctx_desc.dw1 */
+/*** bit 0-31, when NGBE_TXD_DTYP_FCOE=0 ***/
+#define NGBE_TXD_IPSEC_SAIDX(v)   LS(v, 0, 0x3FF) /* ipsec SA index */
+#define NGBE_TXD_ETYPE(v)         LS(v, 11, 0x1) /* tunnel type */
+#define NGBE_TXD_ETYPE_UDP        LS(0, 11, 0x1)
+#define NGBE_TXD_ETYPE_GRE        LS(1, 11, 0x1)
+#define NGBE_TXD_EIPLEN(v)        LS(v, 12, 0x7F) /* tunnel ip header */
+#define NGBE_TXD_DTYP_FCOE        MS(16, 0x1) /* FCoE/IP descriptor */
+#define NGBE_TXD_ETUNLEN(v)       LS(v, 21, 0xFF) /* tunnel header */
+#define NGBE_TXD_DECTTL(v)        LS(v, 29, 0xF) /* decrease ip TTL */
+
+/* @ngbe_tx_ctx_desc.dw2 */
+#define NGBE_TXD_IPSEC_ESPLEN(v)  LS(v, 1, 0x1FF) /* ipsec ESP length */
+#define NGBE_TXD_SNAP             MS(10, 0x1) /* SNAP indication */
+#define NGBE_TXD_TPID_SEL(v)      LS(v, 11, 0x7) /* vlan tag index */
+#define NGBE_TXD_IPSEC_ESP        MS(14, 0x1) /* ipsec type: esp=1 ah=0 */
+#define NGBE_TXD_IPSEC_ESPENC     MS(15, 0x1) /* ESP encrypt */
+#define NGBE_TXD_CTXT             MS(20, 0x1) /* context descriptor */
+#define NGBE_TXD_PTID(v)          LS(v, 24, 0xFF) /* packet type */
 /* @ngbe_tx_ctx_desc.dw3 */
 #define NGBE_TXD_DD               MS(0, 0x1) /* descriptor done */
+#define NGBE_TXD_IDX(v)           LS(v, 4, 0x1) /* ctxt desc index */
+#define NGBE_TXD_L4LEN(v)         LS(v, 8, 0xFF) /* l4 header length */
+#define NGBE_TXD_MSS(v)           LS(v, 16, 0xFFFF) /* l4 MSS */
 
 /**
  * Transmit Data Descriptor (NGBE_TXD_TYP=DATA)
@@ -256,11 +283,34 @@ enum ngbe_ctx_num {
 	NGBE_CTX_NUM  = 2, /**< CTX NUMBER  */
 };
 
+/** Offload features */
+union ngbe_tx_offload {
+	uint64_t data[2];
+	struct {
+		uint64_t ptid:8; /**< Packet Type Identifier. */
+		uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
+		uint64_t l3_len:9; /**< L3 (IP) Header Length. */
+		uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
+		uint64_t tso_segsz:16; /**< TCP TSO segment size */
+		uint64_t vlan_tci:16;
+		/**< VLAN Tag Control Identifier (CPU order). */
+
+		/* fields for TX offloading of tunnels */
+		uint64_t outer_tun_len:8; /**< Outer TUN (Tunnel) Hdr Length. */
+		uint64_t outer_l2_len:8; /**< Outer L2 (MAC) Hdr Length. */
+		uint64_t outer_l3_len:16; /**< Outer L3 (IP) Hdr Length. */
+	};
+};
+
 /**
  * Structure to check if new context need be built
  */
 struct ngbe_ctx_info {
 	uint64_t flags;           /**< ol_flags for context build. */
+	/**< tx offload: vlan, tso, l2-l3-l4 lengths. */
+	union ngbe_tx_offload tx_offload;
+	/** compare mask for tx offload. */
+	union ngbe_tx_offload tx_offload_mask;
 };
 
 /**
@@ -292,6 +342,7 @@ struct ngbe_tx_queue {
 	uint8_t              pthresh;       /**< Prefetch threshold register */
 	uint8_t              hthresh;       /**< Host threshold register */
 	uint8_t              wthresh;       /**< Write-back threshold reg */
+	uint64_t             offloads;      /**< Tx offload flags */
 	uint32_t             ctx_curr;      /**< Hardware context states */
 	/** Hardware context0 history */
 	struct ngbe_ctx_info ctx_cache[NGBE_CTX_NUM];
@@ -306,8 +357,15 @@ struct ngbe_txq_ops {
 	void (*reset)(struct ngbe_tx_queue *txq);
 };
 
+/* Takes an ethdev and a queue and sets up the tx function to be used based on
+ * the queue parameters. Used in tx_queue_setup by primary process and then
+ * in dev_init by secondary process when attaching to an existing ethdev.
+ */
+void ngbe_set_tx_function(struct rte_eth_dev *dev, struct ngbe_tx_queue *txq);
+
 void ngbe_set_rx_function(struct rte_eth_dev *dev);
 
+uint64_t ngbe_get_tx_port_offloads(struct rte_eth_dev *dev);
 uint64_t ngbe_get_rx_port_offloads(struct rte_eth_dev *dev);
 
 #endif /* _NGBE_RXTX_H_ */
-- 
2.21.0.windows.1




  parent reply	other threads:[~2021-10-21  9:51 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-21  9:49 [dpdk-dev] [PATCH v2 00/26] net/ngbe: add many features Jiawen Wu
2021-10-21  9:49 ` [dpdk-dev] [PATCH v2 01/26] net/ngbe: add packet type Jiawen Wu
2021-10-21  9:49 ` [dpdk-dev] [PATCH v2 02/26] net/ngbe: support scattered Rx Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 03/26] net/ngbe: support Rx checksum offload Jiawen Wu
2021-10-21  9:50 ` Jiawen Wu [this message]
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 05/26] net/ngbe: support Rx/Tx burst mode info Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 06/26] net/ngbe: support CRC offload Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 07/26] net/ngbe: support jumbo frame Jiawen Wu
2021-10-29 22:17   ` Ferruh Yigit
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 08/26] net/ngbe: support VLAN offload and VLAN filter Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 09/26] net/ngbe: support basic statistics Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 10/26] net/ngbe: support device xstats Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 11/26] net/ngbe: support MTU set Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 12/26] net/ngbe: add device promiscuous and allmulticast mode Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 13/26] net/ngbe: support getting FW version Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 14/26] net/ngbe: add loopback mode Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 15/26] net/ngbe: support MAC filters Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 16/26] net/ngbe: support RSS hash Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 17/26] net/ngbe: support SRIOV Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 18/26] net/ngbe: add mailbox process operations Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 19/26] net/ngbe: support flow control Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 20/26] net/ngbe: support device LED on and off Jiawen Wu
2021-10-29 22:20   ` Ferruh Yigit
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 21/26] net/ngbe: support EEPROM dump Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 22/26] net/ngbe: support register dump Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 23/26] net/ngbe: support timesync Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 24/26] net/ngbe: add Rx and Tx queue info get Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 25/26] net/ngbe: add Rx and Tx descriptor status Jiawen Wu
2021-10-21  9:50 ` [dpdk-dev] [PATCH v2 26/26] net/ngbe: add Tx done cleanup Jiawen Wu
2021-10-29 22:24   ` Ferruh Yigit
2021-10-29 22:15 ` [dpdk-dev] [PATCH v2 00/26] net/ngbe: add many features Ferruh Yigit
2021-10-29 22:55   ` Ferruh Yigit
2021-11-01  2:08   ` Jiawen Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211021095023.18288-5-jiawenwu@trustnetic.com \
    --to=jiawenwu@trustnetic.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).