From: Ciara Loftus <ciara.loftus@intel.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, Ciara Loftus <ciara.loftus@intel.com>,
Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Subject: [dpdk-dev] [PATCH v2] net/af_xdp: use bpf link for XDP programs
Date: Fri, 22 Oct 2021 10:42:53 +0000 [thread overview]
Message-ID: <20211022104253.31999-1-ciara.loftus@intel.com> (raw)
In-Reply-To: <20211014095040.29773-1-ciara.loftus@intel.com>
Since v0.4.0, if the underlying kernel supports it, libbpf uses 'bpf link'
to manage the programs on the interfaces of the xsks. This has two
repercussions for the PMD.
1. In the case where the PMD asks libbpf to load the default XDP program,
the PMD no longer needs to remove it on teardown. This is because bpf link
handles the unloading under the hood.
2. In the case where the PMD loads a custom program, libbpf expects this
program to be linked via bpf link prior to creating the socket.
This patch introduces probes for the libbpf version and kernel support
for bpf link and orchestrates the loading and unloading of
programs according to the capabilities of the kernel and libbpf. The
libbpf version is checked with meson and pkg-config. The probe for
kernel support mirrors how it is implemented in libbpf. A bpf_link is
created and looked up on loopback device. If successful, bpf_link will be
used for the AF_XDP netdev.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
drivers/net/af_xdp/compat.h | 124 ++++++++++++++++++++++++++++
drivers/net/af_xdp/meson.build | 7 ++
drivers/net/af_xdp/rte_eth_af_xdp.c | 13 +--
3 files changed, 139 insertions(+), 5 deletions(-)
diff --git a/drivers/net/af_xdp/compat.h b/drivers/net/af_xdp/compat.h
index 3880dc7dd7..1d66f5e318 100644
--- a/drivers/net/af_xdp/compat.h
+++ b/drivers/net/af_xdp/compat.h
@@ -2,6 +2,7 @@
* Copyright(c) 2020 Intel Corporation.
*/
+#include <bpf/bpf.h>
#include <bpf/xsk.h>
#include <linux/version.h>
#include <poll.h>
@@ -54,3 +55,126 @@ tx_syscall_needed(struct xsk_ring_prod *q __rte_unused)
return 1;
}
#endif
+
+#ifdef RTE_LIBRTE_AF_XDP_PMD_BPF_LINK
+static int link_lookup(int ifindex, int *link_fd)
+{
+ struct bpf_link_info link_info;
+ __u32 link_len;
+ __u32 id = 0;
+ int err;
+ int fd;
+
+ while (true) {
+ err = bpf_link_get_next_id(id, &id);
+ if (err) {
+ if (errno == ENOENT) {
+ err = 0;
+ break;
+ }
+ break;
+ }
+
+ fd = bpf_link_get_fd_by_id(id);
+ if (fd < 0) {
+ if (errno == ENOENT)
+ continue;
+ err = -errno;
+ break;
+ }
+
+ link_len = sizeof(struct bpf_link_info);
+ memset(&link_info, 0, link_len);
+ err = bpf_obj_get_info_by_fd(fd, &link_info, &link_len);
+ if (err) {
+ close(fd);
+ break;
+ }
+ if (link_info.type == BPF_LINK_TYPE_XDP) {
+ if ((int)link_info.xdp.ifindex == ifindex) {
+ *link_fd = fd;
+ break;
+ }
+ }
+ close(fd);
+ }
+
+ return err;
+}
+
+static bool probe_bpf_link(void)
+{
+ DECLARE_LIBBPF_OPTS(bpf_link_create_opts, opts,
+ .flags = XDP_FLAGS_SKB_MODE);
+ struct bpf_load_program_attr prog_attr;
+ struct bpf_insn insns[2];
+ int prog_fd, link_fd = -1;
+ int ifindex_lo = 1;
+ bool ret = false;
+ int err;
+
+ err = link_lookup(ifindex_lo, &link_fd);
+ if (err)
+ return ret;
+
+ if (link_fd >= 0)
+ return true;
+
+ /* BPF_MOV64_IMM(BPF_REG_0, XDP_PASS), */
+ insns[0].code = BPF_ALU64 | BPF_MOV | BPF_K;
+ insns[0].dst_reg = BPF_REG_0;
+ insns[0].imm = XDP_PASS;
+
+ /* BPF_EXIT_INSN() */
+ insns[1].code = BPF_JMP | BPF_EXIT;
+
+ memset(&prog_attr, 0, sizeof(prog_attr));
+ prog_attr.prog_type = BPF_PROG_TYPE_XDP;
+ prog_attr.insns = insns;
+ prog_attr.insns_cnt = RTE_DIM(insns);
+ prog_attr.license = "GPL";
+
+ prog_fd = bpf_load_program_xattr(&prog_attr, NULL, 0);
+ if (prog_fd < 0)
+ return ret;
+
+ link_fd = bpf_link_create(prog_fd, ifindex_lo, BPF_XDP, &opts);
+ close(prog_fd);
+
+ if (link_fd >= 0) {
+ ret = true;
+ close(link_fd);
+ }
+
+ return ret;
+}
+
+static int link_xdp_program(int if_index, int prog_fd, bool use_bpf_link)
+{
+ DECLARE_LIBBPF_OPTS(bpf_link_create_opts, opts);
+ int link_fd, ret = 0;
+
+ if (!use_bpf_link)
+ return bpf_set_link_xdp_fd(if_index, prog_fd,
+ XDP_FLAGS_UPDATE_IF_NOEXIST);
+
+ opts.flags = 0;
+ link_fd = bpf_link_create(prog_fd, if_index, BPF_XDP, &opts);
+ if (link_fd < 0)
+ ret = -1;
+
+ return ret;
+}
+#else
+static bool probe_bpf_link(void)
+{
+ return false;
+}
+
+static int link_xdp_program(int if_index, int prog_fd,
+ bool use_bpf_link __rte_unused)
+{
+ return bpf_set_link_xdp_fd(if_index, prog_fd,
+ XDP_FLAGS_UPDATE_IF_NOEXIST);
+}
+#endif
diff --git a/drivers/net/af_xdp/meson.build b/drivers/net/af_xdp/meson.build
index 3ed2b29784..42dc6d69ac 100644
--- a/drivers/net/af_xdp/meson.build
+++ b/drivers/net/af_xdp/meson.build
@@ -16,11 +16,18 @@ endif
if bpf_dep.found() and cc.has_header('bpf/xsk.h') and cc.has_header('linux/if_xdp.h')
ext_deps += bpf_dep
+ # check for libbpf shared umem APIs
bpf_ver_dep = dependency('libbpf', version : '>=0.2.0',
required: false, method: 'pkg-config')
if bpf_ver_dep.found()
dpdk_conf.set('RTE_LIBRTE_AF_XDP_PMD_SHARED_UMEM', 1)
endif
+ # check for libbpf bpf link support
+ bpf_link_dep = dependency('libbpf', version : '>=0.4.0',
+ required: false, method: 'pkg-config')
+ if bpf_link_dep.found()
+ dpdk_conf.set('RTE_LIBRTE_AF_XDP_PMD_BPF_LINK', 1)
+ endif
else
build = false
reason = 'missing dependency, "libbpf"'
diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c b/drivers/net/af_xdp/rte_eth_af_xdp.c
index b362ccdcd3..3d295d9277 100644
--- a/drivers/net/af_xdp/rte_eth_af_xdp.c
+++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
@@ -138,6 +138,7 @@ struct pmd_internals {
bool shared_umem;
char prog_path[PATH_MAX];
bool custom_prog_configured;
+ bool use_bpf_link;
struct rte_ether_addr eth_addr;
@@ -971,7 +972,8 @@ eth_dev_close(struct rte_eth_dev *dev)
*/
dev->data->mac_addrs = NULL;
- remove_xdp_program(internals);
+ if (!internals->use_bpf_link)
+ remove_xdp_program(internals);
if (internals->shared_umem) {
struct internal_list *list;
@@ -1146,7 +1148,7 @@ xsk_umem_info *xdp_umem_configure(struct pmd_internals *internals,
}
static int
-load_custom_xdp_prog(const char *prog_path, int if_index)
+load_custom_xdp_prog(const char *prog_path, int if_index, bool use_bpf_link)
{
int ret, prog_fd = -1;
struct bpf_object *obj;
@@ -1170,8 +1172,7 @@ load_custom_xdp_prog(const char *prog_path, int if_index)
}
/* Link the program with the given network device */
- ret = bpf_set_link_xdp_fd(if_index, prog_fd,
- XDP_FLAGS_UPDATE_IF_NOEXIST);
+ ret = link_xdp_program(if_index, prog_fd, use_bpf_link);
if (ret) {
AF_XDP_LOG(ERR, "Failed to set prog fd %d on interface\n",
prog_fd);
@@ -1271,7 +1272,8 @@ xsk_configure(struct pmd_internals *internals, struct pkt_rx_queue *rxq,
if (strnlen(internals->prog_path, PATH_MAX) &&
!internals->custom_prog_configured) {
ret = load_custom_xdp_prog(internals->prog_path,
- internals->if_index);
+ internals->if_index,
+ internals->use_bpf_link);
if (ret) {
AF_XDP_LOG(ERR, "Failed to load custom XDP program %s\n",
internals->prog_path);
@@ -1688,6 +1690,7 @@ init_internals(struct rte_vdev_device *dev, const char *if_name,
strlcpy(internals->if_name, if_name, IFNAMSIZ);
strlcpy(internals->prog_path, prog_path, PATH_MAX);
internals->custom_prog_configured = 0;
+ internals->use_bpf_link = probe_bpf_link();
#ifndef ETH_AF_XDP_SHARED_UMEM
if (shared_umem) {
--
2.17.1
next prev parent reply other threads:[~2021-10-22 10:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-14 9:50 [dpdk-dev] [PATCH] " Ciara Loftus
2021-10-19 13:14 ` Ferruh Yigit
2021-10-22 10:29 ` Loftus, Ciara
2021-10-22 10:42 ` Ciara Loftus [this message]
2021-11-02 16:50 ` [dpdk-dev] [PATCH v2] " Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211022104253.31999-1-ciara.loftus@intel.com \
--to=ciara.loftus@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=maciej.fijalkowski@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).