From: nipun.gupta@nxp.com
To: dev@dpdk.org
Cc: thomas@monjalon.net, ferruh.yigit@intel.com,
hemant.agrawal@nxp.com, Jun Yang <jun.yang@nxp.com>
Subject: [PATCH 10/17] net/dpaa2: support recycle loopback port
Date: Mon, 6 Dec 2021 17:48:17 +0530 [thread overview]
Message-ID: <20211206121824.3493-11-nipun.gupta@nxp.com> (raw)
In-Reply-To: <20211206121824.3493-1-nipun.gupta@nxp.com>
From: Jun Yang <jun.yang@nxp.com>
DPAA2 recycle port is used for configuring the device
in the loopback mode. Loopback configuraiton can be at
dpni level or at serdes level.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
---
drivers/bus/fslmc/portal/dpaa2_hw_pvt.h | 3 +-
drivers/net/dpaa2/dpaa2_ethdev.c | 32 +-
drivers/net/dpaa2/dpaa2_ethdev.h | 23 +
drivers/net/dpaa2/dpaa2_recycle.c | 780 ++++++++++++++++++++++++
drivers/net/dpaa2/mc/dpni.c | 32 +
drivers/net/dpaa2/mc/fsl_dpni_cmd.h | 1 +
drivers/net/dpaa2/meson.build | 1 +
7 files changed, 870 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/dpaa2/dpaa2_recycle.c
diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
index 8cb4d404aa..4d0f7e4b5d 100644
--- a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
+++ b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
- * Copyright 2016-2020 NXP
+ * Copyright 2016-2021 NXP
*
*/
@@ -176,6 +176,7 @@ struct dpaa2_queue {
uint16_t nb_desc;
uint16_t resv;
uint64_t offloads;
+ uint64_t lpbk_cntx;
} __rte_cache_aligned;
struct swp_active_dqs {
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
index a45beed75f..d81f8cb07a 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.c
+++ b/drivers/net/dpaa2/dpaa2_ethdev.c
@@ -668,6 +668,30 @@ dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
if (rx_offloads & RTE_ETH_RX_OFFLOAD_VLAN_FILTER)
dpaa2_vlan_offload_set(dev, RTE_ETH_VLAN_FILTER_MASK);
+ if (eth_conf->lpbk_mode) {
+ ret = dpaa2_dev_recycle_config(dev);
+ if (ret) {
+ DPAA2_PMD_ERR("Error to configure %s to recycle port.",
+ dev->data->name);
+
+ return ret;
+ }
+ } else {
+ /** User may disable loopback mode by calling
+ * "dev_configure" with lpbk_mode cleared.
+ * No matter the port was configured recycle or not,
+ * recycle de-configure is called here.
+ * If port is not recycled, the de-configure will return directly.
+ */
+ ret = dpaa2_dev_recycle_deconfig(dev);
+ if (ret) {
+ DPAA2_PMD_ERR("Error to de-configure recycle port %s.",
+ dev->data->name);
+
+ return ret;
+ }
+ }
+
dpaa2_tm_init(dev);
return 0;
@@ -2601,6 +2625,9 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
return -1;
}
+ if (eth_dev->data->dev_conf.lpbk_mode)
+ dpaa2_dev_recycle_deconfig(eth_dev);
+
/* Clean the device first */
ret = dpni_reset(dpni_dev, CMD_PRI_LOW, priv->token);
if (ret) {
@@ -2624,6 +2651,7 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
priv->dist_queues = attr.num_queues;
priv->num_channels = attr.num_channels;
priv->channel_inuse = 0;
+ rte_spinlock_init(&priv->lpbk_qp_lock);
/* only if the custom CG is enabled */
if (attr.options & DPNI_OPT_CUSTOM_CG)
@@ -2808,7 +2836,9 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
return ret;
}
}
- RTE_LOG(INFO, PMD, "%s: netdev created\n", eth_dev->data->name);
+ RTE_LOG(INFO, PMD, "%s: netdev created, connected to %s\n",
+ eth_dev->data->name, dpaa2_dev->ep_name);
+
return 0;
init_err:
dpaa2_dev_close(eth_dev);
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.h b/drivers/net/dpaa2/dpaa2_ethdev.h
index bd33a22a8e..b032da9eff 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.h
+++ b/drivers/net/dpaa2/dpaa2_ethdev.h
@@ -11,6 +11,7 @@
#include <rte_event_eth_rx_adapter.h>
#include <rte_pmd_dpaa2.h>
+#include <rte_fslmc.h>
#include <dpaa2_hw_pvt.h>
#include "dpaa2_tm.h"
@@ -65,6 +66,18 @@
/* Tx confirmation enabled */
#define DPAA2_TX_CONF_ENABLE 0x06
+/* HW loopback the egress traffic to self ingress*/
+#define DPAA2_TX_MAC_LOOPBACK_MODE 0x20
+
+#define DPAA2_TX_SERDES_LOOPBACK_MODE 0x40
+
+#define DPAA2_TX_DPNI_LOOPBACK_MODE 0x80
+
+#define DPAA2_TX_LOOPBACK_MODE \
+ (DPAA2_TX_MAC_LOOPBACK_MODE | \
+ DPAA2_TX_SERDES_LOOPBACK_MODE | \
+ DPAA2_TX_DPNI_LOOPBACK_MODE)
+
#define DPAA2_RSS_OFFLOAD_ALL ( \
RTE_ETH_RSS_L2_PAYLOAD | \
RTE_ETH_RSS_IP | \
@@ -192,6 +205,7 @@ struct dpaa2_dev_priv {
struct dpaa2_queue *next_tx_conf_queue;
struct rte_eth_dev *eth_dev; /**< Pointer back to holding ethdev */
+ rte_spinlock_t lpbk_qp_lock;
uint8_t channel_inuse;
LIST_HEAD(, rte_flow) flows; /**< Configured flow rule handles. */
@@ -268,4 +282,13 @@ int dpaa2_timesync_read_rx_timestamp(struct rte_eth_dev *dev,
uint32_t flags __rte_unused);
int dpaa2_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
struct timespec *timestamp);
+
+int dpaa2_dev_recycle_config(struct rte_eth_dev *eth_dev);
+int dpaa2_dev_recycle_deconfig(struct rte_eth_dev *eth_dev);
+int dpaa2_dev_recycle_qp_setup(struct rte_dpaa2_device *dpaa2_dev,
+ uint16_t qidx, uint64_t cntx,
+ eth_rx_burst_t tx_lpbk, eth_tx_burst_t rx_lpbk,
+ struct dpaa2_queue **txq,
+ struct dpaa2_queue **rxq);
+
#endif /* _DPAA2_ETHDEV_H */
diff --git a/drivers/net/dpaa2/dpaa2_recycle.c b/drivers/net/dpaa2/dpaa2_recycle.c
new file mode 100644
index 0000000000..e274d24ead
--- /dev/null
+++ b/drivers/net/dpaa2/dpaa2_recycle.c
@@ -0,0 +1,780 @@
+/* * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright 2019-2021 NXP
+ *
+ */
+
+#include <time.h>
+#include <net/if.h>
+
+#include <rte_mbuf.h>
+#include <ethdev_driver.h>
+#include <rte_malloc.h>
+#include <rte_memcpy.h>
+#include <rte_string_fns.h>
+#include <rte_cycles.h>
+#include <rte_kvargs.h>
+#include <rte_dev.h>
+#include <rte_fslmc.h>
+#include <rte_flow_driver.h>
+
+#include "dpaa2_pmd_logs.h"
+#include <fslmc_vfio.h>
+#include <dpaa2_hw_pvt.h>
+#include <dpaa2_hw_mempool.h>
+#include <dpaa2_hw_dpio.h>
+#include <mc/fsl_dpmng.h>
+#include "dpaa2_ethdev.h"
+#include "dpaa2_sparser.h"
+#include <fsl_qbman_debug.h>
+
+#include <rte_io.h>
+#include <unistd.h>
+#include <sys/mman.h>
+
+#define PAGE_SIZE (sysconf(_SC_PAGESIZE))
+#define PAGE_MASK (~(PAGE_SIZE - 1))
+
+#define LSX_SERDES_LAN_NB 8
+#define LSX_SERDES_REG_BASE 0x1ea0000
+#define LSX_LB_EN_BIT 0x10000000
+
+#define CONFIG_SYS_IMMR 0x01000000
+
+#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00E00000)
+#define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0xEA0000)
+
+#define FSL_LX_SRDS1_PRTCL_SHIFT 16
+#define FSL_LX_SRDS2_PRTCL_SHIFT 21
+#define FSL_LX_SRDS3_PRTCL_SHIFT 26
+
+#define FSL_LS_SRDS1_PRTCL_SHIFT 16
+#define FSL_LS_SRDS2_PRTCL_SHIFT 0
+
+#define FSL_LX_SRDS1_REGSR 29
+#define FSL_LX_SRDS2_REGSR 29
+#define FSL_LX_SRDS3_REGSR 29
+
+#define FSL_LS_SRDS1_REGSR 29
+#define FSL_LS_SRDS2_REGSR 30
+
+#define FSL_LX_SRDS1_PRTCL_MASK 0x001F0000
+#define FSL_LX_SRDS2_PRTCL_MASK 0x03E00000
+#define FSL_LX_SRDS3_PRTCL_MASK 0x7C000000
+
+#define FSL_LS_SRDS1_PRTCL_MASK 0xFFFF0000
+#define FSL_LS_SRDS2_PRTCL_MASK 0x0000FFFF
+
+struct ccsr_lx_serdes_lan {
+ uint8_t unused1[0xa0];
+ uint32_t lnatcsr0;
+ uint8_t unused2[0x100 - 0xa4];
+} __rte_packed;
+
+struct ccsr_lx_serdes {
+ uint8_t unused0[0x800];
+ struct ccsr_lx_serdes_lan lane[LSX_SERDES_LAN_NB];
+} __rte_packed;
+
+struct ccsr_ls_serdes {
+ uint8_t unused[0x800];
+ struct serdes_lane {
+ uint32_t gcr0; /* General Control Register 0 */
+ uint32_t gcr1; /* General Control Register 1 */
+ uint32_t gcr2; /* General Control Register 2 */
+ uint32_t ssc0; /* Speed Switch Control 0 */
+ uint32_t rec0; /* Receive Equalization Control 0 */
+ uint32_t rec1; /* Receive Equalization Control 1 */
+ uint32_t tec0; /* Transmit Equalization Control 0 */
+ uint32_t ssc1; /* Speed Switch Control 1 */
+ uint32_t ttlc;
+ uint32_t rev[6];
+ uint32_t tsc3;
+ } lane[LSX_SERDES_LAN_NB];
+ uint8_t res5[0x19fc - 0xa00];
+} __rte_packed;
+
+struct ccsr_gur {
+ uint32_t porsr1; /* POR status 1 */
+ uint32_t porsr2; /* POR status 2 */
+ uint8_t res_008[0x20 - 0x8];
+ uint32_t gpporcr1; /* General-purpose POR configuration */
+ uint32_t gpporcr2; /* General-purpose POR configuration 2 */
+ uint32_t gpporcr3;
+ uint32_t gpporcr4;
+ uint8_t res_030[0x60 - 0x30];
+ uint32_t dcfg_fusesr; /* Fuse status register */
+ uint8_t res_064[0x70 - 0x64];
+ uint32_t devdisr; /* Device disable control 1 */
+ uint32_t devdisr2; /* Device disable control 2 */
+ uint32_t devdisr3; /* Device disable control 3 */
+ uint32_t devdisr4; /* Device disable control 4 */
+ uint32_t devdisr5; /* Device disable control 5 */
+ uint32_t devdisr6; /* Device disable control 6 */
+ uint8_t res_088[0x94 - 0x88];
+ uint32_t coredisr; /* Device disable control 7 */
+ uint8_t res_098[0xa0 - 0x98];
+ uint32_t pvr; /* Processor version */
+ uint32_t svr; /* System version */
+ uint8_t res_0a8[0x100 - 0xa8];
+ uint32_t rcwsr[30]; /* Reset control word status */
+
+ uint8_t res_178[0x200 - 0x178];
+ uint32_t scratchrw[16]; /* Scratch Read/Write */
+ uint8_t res_240[0x300 - 0x240];
+ uint32_t scratchw1r[4]; /* Scratch Read (Write once) */
+ uint8_t res_310[0x400 - 0x310];
+ uint32_t bootlocptrl; /* Boot location pointer low-order addr */
+ uint32_t bootlocptrh; /* Boot location pointer high-order addr */
+ uint8_t res_408[0x520 - 0x408];
+ uint32_t usb1_amqr;
+ uint32_t usb2_amqr;
+ uint8_t res_528[0x530 - 0x528]; /* add more registers when needed */
+ uint32_t sdmm1_amqr;
+ uint32_t sdmm2_amqr;
+ uint8_t res_538[0x550 - 0x538]; /* add more registers when needed */
+ uint32_t sata1_amqr;
+ uint32_t sata2_amqr;
+ uint32_t sata3_amqr;
+ uint32_t sata4_amqr;
+ uint8_t res_560[0x570 - 0x560]; /* add more registers when needed */
+ uint32_t misc1_amqr;
+ uint8_t res_574[0x590 - 0x574]; /* add more registers when needed */
+ uint32_t spare1_amqr;
+ uint32_t spare2_amqr;
+ uint32_t spare3_amqr;
+ uint8_t res_59c[0x620 - 0x59c]; /* add more registers when needed */
+ uint32_t gencr[7]; /* General Control Registers */
+ uint8_t res_63c[0x640 - 0x63c]; /* add more registers when needed */
+ uint32_t cgensr1; /* Core General Status Register */
+ uint8_t res_644[0x660 - 0x644]; /* add more registers when needed */
+ uint32_t cgencr1; /* Core General Control Register */
+ uint8_t res_664[0x740 - 0x664]; /* add more registers when needed */
+ uint32_t tp_ityp[64]; /* Topology Initiator Type Register */
+ struct {
+ uint32_t upper;
+ uint32_t lower;
+ } tp_cluster[4]; /* Core cluster n Topology Register */
+ uint8_t res_864[0x920 - 0x864]; /* add more registers when needed */
+ uint32_t ioqoscr[8]; /*I/O Quality of Services Register */
+ uint32_t uccr;
+ uint8_t res_944[0x960 - 0x944]; /* add more registers when needed */
+ uint32_t ftmcr;
+ uint8_t res_964[0x990 - 0x964]; /* add more registers when needed */
+ uint32_t coredisablesr;
+ uint8_t res_994[0xa00 - 0x994]; /* add more registers when needed */
+ uint32_t sdbgcr; /*Secure Debug Confifuration Register */
+ uint8_t res_a04[0xbf8 - 0xa04]; /* add more registers when needed */
+ uint32_t ipbrr1;
+ uint32_t ipbrr2;
+ uint8_t res_858[0x1000 - 0xc00];
+} __rte_packed;
+
+static void *lsx_ccsr_map_region(uint64_t addr, size_t len)
+{
+ int fd;
+ void *tmp;
+ uint64_t start;
+ uint64_t offset;
+
+ fd = open("/dev/mem", O_RDWR);
+ if (fd < 0) {
+ DPAA2_PMD_ERR("Fail to open /dev/mem");
+ return NULL;
+ }
+
+ start = addr & PAGE_MASK;
+ offset = addr - start;
+ len = len & PAGE_MASK;
+ if (len < (size_t)PAGE_SIZE)
+ len = PAGE_SIZE;
+
+ tmp = mmap(NULL, len, PROT_READ | PROT_WRITE, MAP_SHARED, fd, start);
+
+ close(fd);
+
+ if (tmp != MAP_FAILED)
+ return (uint8_t *)tmp + offset;
+ else
+ return NULL;
+}
+
+static const uint8_t ls_sd1_prot_idx_map[] = {
+ 0x03, 0x05, 0x07, 0x09, 0x0a, 0x0c, 0x0e,
+ 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c,
+ 0x1e, 0x20, 0x22, 0x24, 0x26, 0x28, 0x2a,
+ 0x2b, 0x2d, 0x2e, 0x30, 0x32, 0x33, 0x35,
+ 0x37, 0x39, 0x3b, 0x4b, 0x4c, 0x4d, 0x58
+};
+
+static const uint8_t ls_sd2_prot_idx_map[] = {
+ 0x07, 0x09, 0x0a, 0x0c, 0x0e, 0x10, 0x12,
+ 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e, 0x20,
+ 0x22, 0x24, 0x3d, 0x3f, 0x41, 0x43, 0x45,
+ 0x47, 0x49, 0x4f, 0x50, 0x51, 0x52, 0x53,
+ 0x54, 0x55, 0x56, 0x57
+};
+
+static const uint8_t ls_sd1_eth_loopback_support[][LSX_SERDES_LAN_NB] = {
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0x03*/
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 0x05*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x07*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x09*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x0a*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x0c*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x0e*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x10*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x12*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x14*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x16*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x18*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x1a*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x1c*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x1e*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x20*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x22*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x24*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x26*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x28*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x2a*/
+
+ {0, 0, 0, 0, 1, 1, 1, 1}, /* 0x2b*/
+ {0, 0, 0, 0, 1, 1, 1, 1}, /* 0x2d*/
+ {0, 0, 0, 0, 1, 1, 1, 1}, /* 0x2e*/
+ {0, 0, 0, 0, 1, 1, 1, 1}, /* 0x30*/
+
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0x32*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0x33*/
+
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 0x35*/
+ {1, 1, 0, 0, 0, 0, 0, 0}, /* 0x37*/
+
+ {0, 1, 1, 1, 0, 1, 1, 1}, /* 0x39*/
+ {0, 1, 1, 1, 0, 1, 1, 1}, /* 0x3b*/
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 0x4b*/
+ {0, 0, 0, 0, 1, 1, 1, 1}, /* 0x4c*/
+ {0, 0, 1, 1, 0, 0, 1, 1}, /* 0x4d*/
+ {0, 0, 0, 0, 0, 0, 1, 1} /* 0x58*/
+};
+
+static const uint8_t ls_sd2_eth_loopback_support[][LSX_SERDES_LAN_NB] = {
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x07*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x09*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x0a*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x0c*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x0e*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x10*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x12*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x14*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x16*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x18*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x1a*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x1c*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x1e*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x20*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x22*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 0x24*/
+
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0x3d*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0x3f*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0x41*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0x43*/
+
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 0x45*/
+ {0, 1, 1, 1, 0, 1, 1, 1}, /* 0x47*/
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 0x49*/
+
+ {0, 0, 1, 1, 0, 0, 1, 1}, /* 0x4f*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0x50*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0x51*/
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 0x52*/
+ {0, 1, 1, 1, 0, 1, 1, 1}, /* 0x53*/
+ {0, 0, 1, 1, 0, 0, 1, 1}, /* 0x54*/
+ {0, 1, 1, 1, 0, 1, 1, 1}, /* 0x55*/
+ {0, 0, 1, 1, 0, 0, 1, 1}, /* 0x56*/
+ {0, 0, 0, 0, 0, 0, 1, 1} /* 0x57*/
+};
+
+enum lsx_serdes_id {
+ LSX_SERDES_1 = 1,
+ LSX_SERDES_2 = 2
+};
+
+static const uint8_t lx_sd1_loopback_support[][LSX_SERDES_LAN_NB] = {
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0 prot*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 1 prot*/
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 2 prot*/
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 3 prot*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 4 prot*/
+ {0, 0, 0, 0, 1, 1, 1, 1}, /* 5 prot*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 6 prot*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 7 prot*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 8 prot*/
+ {0, 1, 1, 1, 0, 1, 1, 1}, /* 9 prot*/
+ {0, 1, 1, 1, 0, 1, 1, 1}, /* 10 prot*/
+ {0, 0, 1, 1, 0, 0, 1, 1}, /* 11 prot*/
+ {0, 0, 0, 0, 0, 0, 1, 1}, /* 12 prot*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 13 prot*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 14 prot*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 15 prot*/
+ {0, 0, 1, 1, 0, 0, 0, 0}, /* 16 prot*/
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 17 prot*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 18 prot*/
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 19 prot*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 20 prot*/
+ {1, 1, 1, 1, 0, 0, 1, 1}, /* 21 prot*/
+ {1, 1, 1, 1, 0, 0, 1, 1} /* 22 prot*/
+};
+
+static const uint8_t lx_sd2_loopback_support[][LSX_SERDES_LAN_NB] = {
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 0 prot*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 1 prot*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 2 prot*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 3 prot*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 4 prot*/
+ {0, 0, 0, 0, 0, 0, 0, 0}, /* 5 prot*/
+ {0, 0, 0, 0, 1, 1, 1, 1}, /* 6 prot*/
+ {0, 1, 1, 1, 0, 1, 1, 1}, /* 7 prot*/
+ {0, 0, 0, 0, 0, 0, 1, 1}, /* 8 prot*/
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* 9 prot*/
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 10 prot*/
+ {0, 1, 1, 1, 0, 1, 1, 1}, /* 11 prot*/
+ {1, 1, 1, 1, 0, 0, 0, 0}, /* 12 prot*/
+ {0, 0, 0, 0, 0, 0, 1, 1}, /* 13 prot*/
+ {0, 0, 1, 1, 0, 0, 1, 1} /* 14 prot*/
+};
+
+static inline int
+ls_mac_to_serdes_id(uint8_t mac_id)
+{
+ if (mac_id >= 1 && mac_id <= 8)
+ return LSX_SERDES_1;
+ if (mac_id >= 9 && mac_id <= 16)
+ return LSX_SERDES_2;
+
+ return -1;
+}
+
+static inline int
+lx_mac_to_serdes_id(uint8_t mac_id)
+{
+ if (mac_id >= 1 && mac_id <= 10)
+ return LSX_SERDES_1;
+ if (mac_id >= 11 && mac_id <= 18)
+ return LSX_SERDES_2;
+
+ return -1;
+}
+
+static inline int
+ls_serdes_cfg_to_idx(uint8_t sd_cfg, int sd_id)
+{
+ int i;
+
+ if (sd_id == LSX_SERDES_1) {
+ for (i = 0; i < (int)sizeof(ls_sd1_prot_idx_map); i++) {
+ if (ls_sd1_prot_idx_map[i] == sd_cfg)
+ return i;
+ }
+ } else if (sd_id == LSX_SERDES_2) {
+ for (i = 0; i < (int)sizeof(ls_sd2_prot_idx_map); i++) {
+ if (ls_sd2_prot_idx_map[i] == sd_cfg)
+ return i;
+ }
+ }
+
+ return -1;
+}
+
+static inline int
+lx_serdes_cfg_to_idx(uint8_t sd_cfg, int sd_id __rte_unused)
+{
+ return sd_cfg;
+}
+
+static inline int
+ls_mac_serdes_lpbk_support(uint16_t mac_id,
+ uint16_t *serdes_id, uint16_t *lan_id)
+{
+ struct ccsr_gur *gur_base =
+ lsx_ccsr_map_region(CONFIG_SYS_FSL_GUTS_ADDR,
+ sizeof(struct ccsr_gur) / 64 * 64 + 64);
+ uint32_t sd_cfg;
+ int sd_id, sd_idx;
+ uint16_t lan_id_tmp = 0;
+ const uint8_t *ls_sd_loopback_support;
+
+ sd_id = ls_mac_to_serdes_id(mac_id);
+
+ if (sd_id == LSX_SERDES_1) {
+ sd_cfg = rte_read32(&gur_base->rcwsr[FSL_LS_SRDS1_REGSR - 1]) &
+ FSL_LS_SRDS1_PRTCL_MASK;
+ sd_cfg >>= FSL_LS_SRDS1_PRTCL_SHIFT;
+ } else if (sd_id == LSX_SERDES_2) {
+ sd_cfg = rte_read32(&gur_base->rcwsr[FSL_LS_SRDS2_REGSR - 1]) &
+ FSL_LS_SRDS2_PRTCL_MASK;
+ sd_cfg >>= FSL_LS_SRDS2_PRTCL_SHIFT;
+ } else {
+ return false;
+ }
+ sd_cfg = sd_cfg & 0xff;
+
+ sd_idx = ls_serdes_cfg_to_idx(sd_cfg, sd_id);
+ if (sd_idx < 0) {
+ DPAA2_PMD_ERR("Serdes protocol(0x%02x) does not exist\n",
+ sd_cfg);
+ return false;
+ }
+
+ if (sd_id == LSX_SERDES_1) {
+ ls_sd_loopback_support =
+ &ls_sd1_eth_loopback_support[sd_idx][0];
+ } else {
+ ls_sd_loopback_support =
+ &ls_sd2_eth_loopback_support[sd_idx][0];
+ }
+
+ if (sd_id == LSX_SERDES_1)
+ lan_id_tmp = (mac_id - 1);
+ else
+ lan_id_tmp = (mac_id - 9);
+
+ if (lan_id_tmp >= LSX_SERDES_LAN_NB) {
+ DPAA2_PMD_ERR("Invalid serdes lan(%d).", lan_id_tmp);
+ return false;
+ }
+
+ if (!ls_sd_loopback_support[lan_id_tmp])
+ return false;
+
+ if (lan_id)
+ *lan_id = lan_id_tmp;
+ if (serdes_id)
+ *serdes_id = sd_id;
+
+ return true;
+}
+
+static inline int
+lx_mac_serdes_lpbk_support(uint16_t mac_id,
+ uint16_t *serdes_id, uint16_t *lan_id)
+{
+ struct ccsr_gur *gur_base =
+ lsx_ccsr_map_region(CONFIG_SYS_FSL_GUTS_ADDR,
+ sizeof(struct ccsr_gur) / 64 * 64 + 64);
+ uint32_t sd_cfg;
+ int sd_id, sd_idx;
+ uint16_t lan_id_tmp = 0;
+ const uint8_t *lx_sd_loopback_support;
+
+ sd_id = lx_mac_to_serdes_id(mac_id);
+
+ if (sd_id == LSX_SERDES_1) {
+ sd_cfg = rte_read32(&gur_base->rcwsr[FSL_LX_SRDS1_REGSR - 1]) &
+ FSL_LX_SRDS1_PRTCL_MASK;
+ sd_cfg >>= FSL_LX_SRDS1_PRTCL_SHIFT;
+ } else if (sd_id == LSX_SERDES_2) {
+ sd_cfg = rte_read32(&gur_base->rcwsr[FSL_LX_SRDS2_REGSR - 1]) &
+ FSL_LX_SRDS2_PRTCL_MASK;
+ sd_cfg >>= FSL_LX_SRDS2_PRTCL_SHIFT;
+ } else {
+ return false;
+ }
+ sd_cfg = sd_cfg & 0xff;
+
+ sd_idx = lx_serdes_cfg_to_idx(sd_cfg, sd_id);
+ if (sd_idx < 0)
+ return false;
+
+ if (sd_id == LSX_SERDES_1)
+ lx_sd_loopback_support = &lx_sd1_loopback_support[sd_idx][0];
+ else
+ lx_sd_loopback_support = &lx_sd2_loopback_support[sd_idx][0];
+
+ if (sd_id == LSX_SERDES_1) {
+ if (mac_id == 1)
+ lan_id_tmp = 0;
+ else if (mac_id == 2)
+ lan_id_tmp = 4;
+ else
+ lan_id_tmp = (mac_id - 3);
+ } else {
+ if (mac_id == 11)
+ lan_id_tmp = 0;
+ else if (mac_id == 12)
+ lan_id_tmp = 1;
+ else if (mac_id == 13)
+ lan_id_tmp = 6;
+ else if (mac_id == 14)
+ lan_id_tmp = 7;
+ else if (mac_id == 15)
+ lan_id_tmp = 4;
+ else if (mac_id == 16)
+ lan_id_tmp = 5;
+ else if (mac_id == 17)
+ lan_id_tmp = 2;
+ else if (mac_id == 18)
+ lan_id_tmp = 3;
+ else
+ return false;
+ }
+
+ if (lan_id_tmp >= LSX_SERDES_LAN_NB)
+ return false;
+
+ if (!lx_sd_loopback_support[lan_id_tmp])
+ return false;
+
+ if (lan_id)
+ *lan_id = lan_id_tmp;
+ if (serdes_id)
+ *serdes_id = sd_id;
+
+ return true;
+}
+
+static inline int
+ls_serdes_eth_lpbk(uint16_t mac_id, int en)
+{
+ uint16_t serdes_id, lan_id;
+ int ret;
+ uint32_t data;
+ struct ccsr_ls_serdes *serdes_base;
+ void *reg = 0;
+
+ ret = ls_mac_serdes_lpbk_support(mac_id, &serdes_id, &lan_id);
+ if (!ret)
+ return -ENOTSUP;
+
+ serdes_base = lsx_ccsr_map_region(CONFIG_SYS_FSL_SERDES_ADDR +
+ (serdes_id - LSX_SERDES_1) * 0x10000,
+ sizeof(struct ccsr_ls_serdes) / 64 * 64 + 64);
+ if (!serdes_base) {
+ DPAA2_PMD_ERR("Serdes register map failed\n");
+ return -ENOMEM;
+ }
+
+ if (serdes_id == LSX_SERDES_1)
+ lan_id = LSX_SERDES_LAN_NB - lan_id - 1;
+
+ reg = &serdes_base->lane[lan_id].tsc3;
+
+ data = rte_read32(reg);
+ if (en)
+ rte_write32(data | LSX_LB_EN_BIT, reg);
+ else
+ rte_write32(data & (~LSX_LB_EN_BIT), reg);
+
+ return 0;
+}
+
+static inline int
+lx_serdes_eth_lpbk(uint16_t mac_id, int en)
+{
+ uint16_t serdes_id = 0xffff, lan_id = 0xffff;
+ int ret;
+ uint32_t data;
+ struct ccsr_lx_serdes *serdes_base;
+ void *reg = 0;
+
+ ret = lx_mac_serdes_lpbk_support(mac_id, &serdes_id, &lan_id);
+ if (!ret)
+ return -ENOTSUP;
+
+ serdes_base = lsx_ccsr_map_region(CONFIG_SYS_FSL_SERDES_ADDR +
+ (serdes_id - LSX_SERDES_1) * 0x10000,
+ sizeof(struct ccsr_lx_serdes) / 64 * 64 + 64);
+ if (!serdes_base) {
+ DPAA2_PMD_ERR("Serdes register map failed\n");
+ return -ENOMEM;
+ }
+
+ if (serdes_id == LSX_SERDES_1)
+ lan_id = LSX_SERDES_LAN_NB - lan_id - 1;
+
+ reg = &serdes_base->lane[lan_id].lnatcsr0;
+
+ data = rte_read32(reg);
+ if (en)
+ rte_write32(data | LSX_LB_EN_BIT, reg);
+ else
+ rte_write32(data & (~LSX_LB_EN_BIT), reg);
+
+ return 0;
+}
+
+/* Configure dpaa2 port as recycle port */
+int
+dpaa2_dev_recycle_config(struct rte_eth_dev *eth_dev)
+{
+ struct rte_device *dev = eth_dev->device;
+ struct dpaa2_dev_priv *priv = eth_dev->data->dev_private;
+ struct rte_dpaa2_device *dpaa2_dev =
+ container_of(dev, struct rte_dpaa2_device, device);
+ struct fsl_mc_io *dpni_dev = eth_dev->process_private;
+ struct dpni_port_cfg port_cfg;
+ int ret;
+
+ if (priv->flags & DPAA2_TX_LOOPBACK_MODE) {
+ DPAA2_PMD_INFO("%s has been configured recycle device.",
+ eth_dev->data->name);
+
+ return 0;
+ }
+
+ if (dpaa2_dev->ep_dev_type == DPAA2_MAC) {
+ /** For dpmac-dpni connection,
+ * try setting serdes loopback as recycle device at first.
+ */
+ if (dpaa2_svr_family == SVR_LS2088A) {
+ ret = ls_serdes_eth_lpbk(dpaa2_dev->ep_object_id, 1);
+ if (!ret) {
+ priv->flags |= DPAA2_TX_SERDES_LOOPBACK_MODE;
+ return 0;
+ }
+ } else if (dpaa2_svr_family == SVR_LX2160A) {
+ ret = lx_serdes_eth_lpbk(dpaa2_dev->ep_object_id, 1);
+ if (!ret) {
+ priv->flags |= DPAA2_TX_SERDES_LOOPBACK_MODE;
+ return 0;
+ }
+ } else {
+ DPAA2_PMD_DEBUG("Serdes loopback not support SoC(0x%08x)",
+ dpaa2_svr_family);
+ }
+
+ /** If serdes loopback is not supported for this mac,
+ * trying set mac loopback.
+ */
+
+ port_cfg.loopback_en = 1;
+ ret = dpni_set_port_cfg(dpni_dev, CMD_PRI_LOW,
+ priv->token,
+ DPNI_PORT_CFG_LOOPBACK,
+ &port_cfg);
+ if (ret) {
+ DPAA2_PMD_ERR("Error(%d) to enable loopback", ret);
+ return -ENOTSUP;
+ }
+
+ priv->flags |= DPAA2_TX_MAC_LOOPBACK_MODE;
+
+ return 0;
+ }
+
+ if (dpaa2_dev->ep_dev_type == DPAA2_ETH &&
+ dpaa2_dev->object_id == dpaa2_dev->ep_object_id) {
+ priv->flags |= DPAA2_TX_DPNI_LOOPBACK_MODE;
+
+ return 0;
+ }
+
+ return -ENOTSUP;
+}
+
+int
+dpaa2_dev_recycle_deconfig(struct rte_eth_dev *eth_dev)
+{
+ struct rte_device *dev = eth_dev->device;
+ struct dpaa2_dev_priv *priv = eth_dev->data->dev_private;
+ struct rte_dpaa2_device *dpaa2_dev =
+ container_of(dev, struct rte_dpaa2_device, device);
+ struct fsl_mc_io *dpni_dev = eth_dev->process_private;
+ struct dpni_port_cfg port_cfg;
+ int ret = 0;
+
+ if (!(priv->flags & DPAA2_TX_LOOPBACK_MODE))
+ return 0;
+
+ if (priv->flags & DPAA2_TX_SERDES_LOOPBACK_MODE) {
+ if (dpaa2_svr_family == SVR_LS2088A) {
+ ret = ls_serdes_eth_lpbk(dpaa2_dev->ep_object_id, 0);
+ if (ret) {
+ DPAA2_PMD_WARN("Error(%d) to disable Serdes loopback",
+ ret);
+ } else {
+ priv->flags &= ~DPAA2_TX_SERDES_LOOPBACK_MODE;
+ }
+ } else if (dpaa2_svr_family == SVR_LX2160A) {
+ ret = lx_serdes_eth_lpbk(dpaa2_dev->ep_object_id, 0);
+ if (ret) {
+ DPAA2_PMD_WARN("Error(%d) to disable Serdes loopback",
+ ret);
+ } else {
+ priv->flags &= ~DPAA2_TX_SERDES_LOOPBACK_MODE;
+ }
+ } else {
+ DPAA2_PMD_DEBUG("Serdes loopback not support SoC(0x%08x)",
+ dpaa2_svr_family);
+ }
+ }
+
+ if (priv->flags & DPAA2_TX_MAC_LOOPBACK_MODE) {
+ port_cfg.loopback_en = 0;
+ ret = dpni_set_port_cfg(dpni_dev, CMD_PRI_LOW,
+ priv->token,
+ DPNI_PORT_CFG_LOOPBACK,
+ &port_cfg);
+ if (ret) {
+ DPAA2_PMD_ERR("Error(%d) to disable TX mac loopback",
+ ret);
+ } else {
+ priv->flags &= ~DPAA2_TX_MAC_LOOPBACK_MODE;
+ }
+ }
+
+ if (priv->flags & DPAA2_TX_DPNI_LOOPBACK_MODE)
+ priv->flags &= ~DPAA2_TX_DPNI_LOOPBACK_MODE;
+
+ return ret;
+}
+
+int
+dpaa2_dev_recycle_qp_setup(struct rte_dpaa2_device *dpaa2_dev,
+ uint16_t qidx, uint64_t cntx,
+ eth_rx_burst_t tx_lpbk, eth_tx_burst_t rx_lpbk,
+ struct dpaa2_queue **txq,
+ struct dpaa2_queue **rxq)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_data *data;
+ struct dpaa2_queue *txq_tmp;
+ struct dpaa2_queue *rxq_tmp;
+ struct dpaa2_dev_priv *priv;
+
+ dev = dpaa2_dev->eth_dev;
+ data = dev->data;
+ priv = data->dev_private;
+
+ if (!(priv->flags & DPAA2_TX_LOOPBACK_MODE) &&
+ (tx_lpbk || rx_lpbk)) {
+ DPAA2_PMD_ERR("%s is NOT recycle device!", data->name);
+
+ return -EINVAL;
+ }
+
+ if (qidx >= data->nb_rx_queues || qidx >= data->nb_tx_queues)
+ return -EINVAL;
+
+ rte_spinlock_lock(&priv->lpbk_qp_lock);
+
+ if (tx_lpbk)
+ dev->tx_pkt_burst = tx_lpbk;
+
+ if (rx_lpbk)
+ dev->rx_pkt_burst = rx_lpbk;
+
+ txq_tmp = data->tx_queues[qidx];
+ txq_tmp->lpbk_cntx = cntx;
+ rxq_tmp = data->rx_queues[qidx];
+ rxq_tmp->lpbk_cntx = cntx;
+
+ if (txq)
+ *txq = txq_tmp;
+ if (rxq)
+ *rxq = rxq_tmp;
+
+ rte_spinlock_unlock(&priv->lpbk_qp_lock);
+
+ return 0;
+}
diff --git a/drivers/net/dpaa2/mc/dpni.c b/drivers/net/dpaa2/mc/dpni.c
index b7a65cb637..7a2bc15eb4 100644
--- a/drivers/net/dpaa2/mc/dpni.c
+++ b/drivers/net/dpaa2/mc/dpni.c
@@ -3087,3 +3087,35 @@ int dpni_get_custom_tpid(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
return err;
}
+/**
+ * dpni_set_port_cfg() - performs configurations at physical port connected on
+ * this dpni. The command have effect only if dpni is connected to
+ * another dpni object
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPNI object
+ * @flags: Valid fields from port_cfg structure
+ * @port_cfg: Configuration data; one or more of DPNI_PORT_CFG_
+ * The command can be called only when dpni is connected to a dpmac object. If
+ * the dpni is unconnected or the endpoint is not a dpni it will return error.
+ * If dpmac endpoint is disconnected the settings will be lost
+ */
+int dpni_set_port_cfg(struct fsl_mc_io *mc_io, uint32_t cmd_flags,
+ uint16_t token, uint32_t flags, struct dpni_port_cfg *port_cfg)
+{
+ struct dpni_cmd_set_port_cfg *cmd_params;
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_PORT_CFG,
+ cmd_flags, token);
+
+ cmd_params = (struct dpni_cmd_set_port_cfg *)cmd.params;
+ cmd_params->flags = cpu_to_le32(flags);
+ dpni_set_field(cmd_params->bit_params, PORT_LOOPBACK_EN,
+ !!port_cfg->loopback_en);
+
+ /* send command to MC */
+ return mc_send_command(mc_io, &cmd);
+}
+
diff --git a/drivers/net/dpaa2/mc/fsl_dpni_cmd.h b/drivers/net/dpaa2/mc/fsl_dpni_cmd.h
index ed0bd7615a..b7bd7556af 100644
--- a/drivers/net/dpaa2/mc/fsl_dpni_cmd.h
+++ b/drivers/net/dpaa2/mc/fsl_dpni_cmd.h
@@ -119,6 +119,7 @@
#define DPNI_CMDID_REMOVE_CUSTOM_TPID DPNI_CMD(0x276)
#define DPNI_CMDID_GET_CUSTOM_TPID DPNI_CMD(0x277)
#define DPNI_CMDID_GET_LINK_CFG DPNI_CMD(0x278)
+#define DPNI_CMDID_SET_PORT_CFG DPNI_CMD(0x27B)
/* Macros for accessing command fields smaller than 1byte */
#define DPNI_MASK(field) \
diff --git a/drivers/net/dpaa2/meson.build b/drivers/net/dpaa2/meson.build
index 21b827a259..51598c048c 100644
--- a/drivers/net/dpaa2/meson.build
+++ b/drivers/net/dpaa2/meson.build
@@ -14,6 +14,7 @@ sources = files(
'dpaa2_mux.c',
'dpaa2_ethdev.c',
'dpaa2_flow.c',
+ 'dpaa2_recycle.c',
'dpaa2_rxtx.c',
'dpaa2_sparser.c',
'dpaa2_ptp.c',
--
2.17.1
next prev parent reply other threads:[~2021-12-06 12:19 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-06 12:18 [PATCH 00/17] features and fixes on NXP eth devices nipun.gupta
2021-12-06 12:18 ` [PATCH 01/17] bus/fslmc: update MC to 10.29 nipun.gupta
2021-12-06 12:18 ` [PATCH 02/17] bus/fslmc: use dmb oshst for synchronization before I/O nipun.gupta
2021-12-06 12:18 ` [PATCH 03/17] net/dpaa2: warn user in case of high nb desc nipun.gupta
2021-12-06 12:18 ` [PATCH 04/17] net/dpaa2: fix unregistering interrupt handler nipun.gupta
2021-12-06 12:18 ` [PATCH 05/17] net/dpaa2: fix timestamping for IEEE1588 nipun.gupta
2021-12-06 12:18 ` [PATCH 06/17] net/dpaa2: support multiple txqs en-queue for ordered nipun.gupta
2021-12-06 12:18 ` [PATCH 07/17] net/dpaa2: add support for level 2 in traffic management nipun.gupta
2021-12-06 12:18 ` [PATCH 08/17] net/dpaa2: secondary process handling for dpni nipun.gupta
2021-12-06 12:18 ` [PATCH 09/17] bus/fslmc: add and scan dprc devices nipun.gupta
2021-12-06 12:18 ` nipun.gupta [this message]
2021-12-06 12:18 ` [PATCH 11/17] net/dpaa: check status before configuring shared MAC nipun.gupta
2021-12-06 12:18 ` [PATCH 12/17] net/dpaa: enable checksum for shared MAC interface nipun.gupta
2021-12-06 12:18 ` [PATCH 13/17] net/enetc: add support for VFs nipun.gupta
2021-12-06 12:18 ` [PATCH 14/17] net/pfe: disable HW CRC stripping nipun.gupta
2021-12-06 12:18 ` [PATCH 15/17] net/pfe: reduce driver initialization time nipun.gupta
2021-12-06 12:18 ` [PATCH 16/17] net/pfe: remove setting unused value nipun.gupta
2021-12-06 12:18 ` [PATCH 17/17] net/pfe: fix for 32 bit and PPC compilation nipun.gupta
2021-12-27 16:16 ` [PATCH v2 00/16] features and fixes on NXP eth devices nipun.gupta
2021-12-27 16:16 ` [PATCH v2 01/16] bus/fslmc: update MC to 10.29 nipun.gupta
2021-12-27 16:16 ` [PATCH v2 02/16] bus/fslmc: use dmb oshst for synchronization before I/O nipun.gupta
2021-12-27 16:16 ` [PATCH v2 03/16] net/dpaa2: warn user in case of high nb desc nipun.gupta
2021-12-27 16:16 ` [PATCH v2 04/16] net/dpaa2: fix unregistering interrupt handler nipun.gupta
2021-12-27 16:16 ` [PATCH v2 05/16] net/dpaa2: fix timestamping for IEEE1588 nipun.gupta
2021-12-27 16:16 ` [PATCH v2 06/16] net/dpaa2: support multiple txqs en-queue for ordered nipun.gupta
2021-12-27 18:01 ` Stephen Hemminger
2022-01-03 5:47 ` Nipun Gupta
2022-01-03 8:39 ` Nipun Gupta
2021-12-27 16:16 ` [PATCH v2 07/16] net/dpaa2: add support for level 2 in traffic management nipun.gupta
2021-12-27 16:16 ` [PATCH v2 08/16] net/dpaa2: secondary process handling for dpni nipun.gupta
2021-12-27 16:16 ` [PATCH v2 09/16] bus/fslmc: add and scan dprc devices nipun.gupta
2021-12-27 16:16 ` [PATCH v2 10/16] net/dpaa2: support recycle loopback port nipun.gupta
2021-12-27 16:16 ` [PATCH v2 11/16] net/dpaa: check status before configuring shared MAC nipun.gupta
2021-12-27 16:16 ` [PATCH v2 12/16] net/dpaa: enable checksum for shared MAC interface nipun.gupta
2021-12-27 16:16 ` [PATCH v2 13/16] net/enetc: add support for VFs nipun.gupta
2021-12-27 16:16 ` [PATCH v2 14/16] net/pfe: disable HW CRC stripping nipun.gupta
2021-12-27 17:49 ` Stephen Hemminger
2022-01-03 6:09 ` Nipun Gupta
2021-12-27 16:16 ` [PATCH v2 15/16] net/pfe: reduce driver initialization time nipun.gupta
2021-12-27 17:57 ` Stephen Hemminger
2022-01-03 5:45 ` Nipun Gupta
2021-12-27 16:16 ` [PATCH v2 16/16] net/pfe: remove setting unused value nipun.gupta
2021-12-27 17:50 ` [PATCH v2 00/16] features and fixes on NXP eth devices Stephen Hemminger
2022-01-03 5:45 ` Nipun Gupta
2022-01-03 10:01 ` [PATCH v3 00/15] " nipun.gupta
2022-01-03 10:01 ` [PATCH v3 01/15] bus/fslmc: update MC to 10.29 nipun.gupta
2022-01-03 10:01 ` [PATCH v3 02/15] bus/fslmc: use dmb oshst for synchronization before I/O nipun.gupta
2022-01-03 10:01 ` [PATCH v3 03/15] net/dpaa2: warn user in case of high nb desc nipun.gupta
2022-01-03 10:01 ` [PATCH v3 04/15] net/dpaa2: fix unregistering interrupt handler nipun.gupta
2022-01-03 10:01 ` [PATCH v3 05/15] net/dpaa2: fix timestamping for IEEE1588 nipun.gupta
2022-01-03 10:01 ` [PATCH v3 06/15] net/dpaa2: support multiple txqs en-queue for ordered nipun.gupta
2022-01-03 10:01 ` [PATCH v3 07/15] net/dpaa2: add support for level 2 in traffic management nipun.gupta
2022-01-03 10:01 ` [PATCH v3 08/15] net/dpaa2: secondary process handling for dpni nipun.gupta
2022-01-03 10:01 ` [PATCH v3 09/15] bus/fslmc: add and scan dprc devices nipun.gupta
2022-01-03 10:01 ` [PATCH v3 10/15] net/dpaa2: support recycle loopback port nipun.gupta
2022-02-01 9:27 ` David Marchand
2022-02-01 9:34 ` Nipun Gupta
2022-02-01 9:43 ` Thomas Monjalon
2022-02-01 9:53 ` [PATCH] net/dpaa2: fix build with musl Thomas Monjalon
2022-02-01 10:10 ` Nipun Gupta
2022-02-01 11:03 ` Thomas Monjalon
2022-01-03 10:01 ` [PATCH v3 11/15] net/dpaa: check status before configuring shared MAC nipun.gupta
2022-01-03 10:01 ` [PATCH v3 12/15] net/dpaa: enable checksum for shared MAC interface nipun.gupta
2022-01-03 10:01 ` [PATCH v3 13/15] net/enetc: add support for VFs nipun.gupta
2022-01-03 10:01 ` [PATCH v3 14/15] net/pfe: reduce driver initialization time nipun.gupta
2022-01-03 10:01 ` [PATCH v3 15/15] net/pfe: remove setting unused value nipun.gupta
2022-01-12 6:05 ` [PATCH v3 00/15] features and fixes on NXP eth devices Hemant Agrawal
2022-01-20 15:26 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211206121824.3493-11-nipun.gupta@nxp.com \
--to=nipun.gupta@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=jun.yang@nxp.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).