From: nipun.gupta@nxp.com
To: dev@dpdk.org
Cc: thomas@monjalon.net, ferruh.yigit@intel.com,
hemant.agrawal@nxp.com, Jun Yang <jun.yang@nxp.com>
Subject: [PATCH v2 06/16] net/dpaa2: support multiple txqs en-queue for ordered
Date: Mon, 27 Dec 2021 21:46:35 +0530 [thread overview]
Message-ID: <20211227161645.24359-7-nipun.gupta@nxp.com> (raw)
In-Reply-To: <20211227161645.24359-1-nipun.gupta@nxp.com>
From: Jun Yang <jun.yang@nxp.com>
Support the tx enqueue in order queue mode, where queue id
for each event may be different.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
---
drivers/event/dpaa2/dpaa2_eventdev.c | 12 ++-
drivers/net/dpaa2/dpaa2_ethdev.h | 4 +
drivers/net/dpaa2/dpaa2_rxtx.c | 142 +++++++++++++++++++++++++++
drivers/net/dpaa2/version.map | 1 +
4 files changed, 155 insertions(+), 4 deletions(-)
diff --git a/drivers/event/dpaa2/dpaa2_eventdev.c b/drivers/event/dpaa2/dpaa2_eventdev.c
index 4d94c315d2..f3d8a7e4f1 100644
--- a/drivers/event/dpaa2/dpaa2_eventdev.c
+++ b/drivers/event/dpaa2/dpaa2_eventdev.c
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright 2017,2019 NXP
+ * Copyright 2017,2019-2021 NXP
*/
#include <assert.h>
@@ -1003,16 +1003,20 @@ dpaa2_eventdev_txa_enqueue(void *port,
struct rte_event ev[],
uint16_t nb_events)
{
- struct rte_mbuf *m = (struct rte_mbuf *)ev[0].mbuf;
+ void *txq[32];
+ struct rte_mbuf *m[32];
uint8_t qid, i;
RTE_SET_USED(port);
for (i = 0; i < nb_events; i++) {
- qid = rte_event_eth_tx_adapter_txq_get(m);
- rte_eth_tx_burst(m->port, qid, &m, 1);
+ m[i] = (struct rte_mbuf *)ev[i].mbuf;
+ qid = rte_event_eth_tx_adapter_txq_get(m[i]);
+ txq[i] = rte_eth_devices[m[i]->port].data->tx_queues[qid];
}
+ dpaa2_dev_tx_multi_txq_ordered(txq, m, nb_events);
+
return nb_events;
}
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.h b/drivers/net/dpaa2/dpaa2_ethdev.h
index c21571e63d..e001a7e49d 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.h
+++ b/drivers/net/dpaa2/dpaa2_ethdev.h
@@ -241,6 +241,10 @@ void dpaa2_dev_process_ordered_event(struct qbman_swp *swp,
uint16_t dpaa2_dev_tx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts);
uint16_t dpaa2_dev_tx_ordered(void *queue, struct rte_mbuf **bufs,
uint16_t nb_pkts);
+__rte_internal
+uint16_t dpaa2_dev_tx_multi_txq_ordered(void **queue,
+ struct rte_mbuf **bufs, uint16_t nb_pkts);
+
uint16_t dummy_dev_tx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts);
void dpaa2_dev_free_eqresp_buf(uint16_t eqresp_ci);
void dpaa2_flow_clean(struct rte_eth_dev *dev);
diff --git a/drivers/net/dpaa2/dpaa2_rxtx.c b/drivers/net/dpaa2/dpaa2_rxtx.c
index ee3ed1b152..1096b1cf1d 100644
--- a/drivers/net/dpaa2/dpaa2_rxtx.c
+++ b/drivers/net/dpaa2/dpaa2_rxtx.c
@@ -1468,6 +1468,148 @@ dpaa2_set_enqueue_descriptor(struct dpaa2_queue *dpaa2_q,
*dpaa2_seqn(m) = DPAA2_INVALID_MBUF_SEQN;
}
+uint16_t
+dpaa2_dev_tx_multi_txq_ordered(void **queue,
+ struct rte_mbuf **bufs, uint16_t nb_pkts)
+{
+ /* Function to transmit the frames to multiple queues respectively.*/
+ uint32_t loop, retry_count;
+ int32_t ret;
+ struct qbman_fd fd_arr[MAX_TX_RING_SLOTS];
+ uint32_t frames_to_send;
+ struct rte_mempool *mp;
+ struct qbman_eq_desc eqdesc[MAX_TX_RING_SLOTS];
+ struct dpaa2_queue *dpaa2_q[MAX_TX_RING_SLOTS];
+ struct qbman_swp *swp;
+ uint16_t bpid;
+ struct rte_mbuf *mi;
+ struct rte_eth_dev_data *eth_data;
+ struct dpaa2_dev_priv *priv;
+ struct dpaa2_queue *order_sendq;
+
+ if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
+ ret = dpaa2_affine_qbman_swp();
+ if (ret) {
+ DPAA2_PMD_ERR(
+ "Failed to allocate IO portal, tid: %d\n",
+ rte_gettid());
+ return 0;
+ }
+ }
+ swp = DPAA2_PER_LCORE_PORTAL;
+
+ for (loop = 0; loop < nb_pkts; loop++) {
+ dpaa2_q[loop] = (struct dpaa2_queue *)queue[loop];
+ eth_data = dpaa2_q[loop]->eth_data;
+ priv = eth_data->dev_private;
+ qbman_eq_desc_clear(&eqdesc[loop]);
+ if (*dpaa2_seqn(*bufs) && priv->en_ordered) {
+ order_sendq = (struct dpaa2_queue *)priv->tx_vq[0];
+ dpaa2_set_enqueue_descriptor(order_sendq,
+ (*bufs),
+ &eqdesc[loop]);
+ } else {
+ qbman_eq_desc_set_no_orp(&eqdesc[loop],
+ DPAA2_EQ_RESP_ERR_FQ);
+ qbman_eq_desc_set_fq(&eqdesc[loop],
+ dpaa2_q[loop]->fqid);
+ }
+
+ retry_count = 0;
+ while (qbman_result_SCN_state(dpaa2_q[loop]->cscn)) {
+ retry_count++;
+ /* Retry for some time before giving up */
+ if (retry_count > CONG_RETRY_COUNT)
+ goto send_frames;
+ }
+
+ if (likely(RTE_MBUF_DIRECT(*bufs))) {
+ mp = (*bufs)->pool;
+ /* Check the basic scenario and set
+ * the FD appropriately here itself.
+ */
+ if (likely(mp && mp->ops_index ==
+ priv->bp_list->dpaa2_ops_index &&
+ (*bufs)->nb_segs == 1 &&
+ rte_mbuf_refcnt_read((*bufs)) == 1)) {
+ if (unlikely((*bufs)->ol_flags
+ & RTE_MBUF_F_TX_VLAN)) {
+ ret = rte_vlan_insert(bufs);
+ if (ret)
+ goto send_frames;
+ }
+ DPAA2_MBUF_TO_CONTIG_FD((*bufs),
+ &fd_arr[loop],
+ mempool_to_bpid(mp));
+ bufs++;
+ dpaa2_q[loop]++;
+ continue;
+ }
+ } else {
+ mi = rte_mbuf_from_indirect(*bufs);
+ mp = mi->pool;
+ }
+ /* Not a hw_pkt pool allocated frame */
+ if (unlikely(!mp || !priv->bp_list)) {
+ DPAA2_PMD_ERR("Err: No buffer pool attached");
+ goto send_frames;
+ }
+
+ if (mp->ops_index != priv->bp_list->dpaa2_ops_index) {
+ DPAA2_PMD_WARN("Non DPAA2 buffer pool");
+ /* alloc should be from the default buffer pool
+ * attached to this interface
+ */
+ bpid = priv->bp_list->buf_pool.bpid;
+
+ if (unlikely((*bufs)->nb_segs > 1)) {
+ DPAA2_PMD_ERR(
+ "S/G not supp for non hw offload buffer");
+ goto send_frames;
+ }
+ if (eth_copy_mbuf_to_fd(*bufs,
+ &fd_arr[loop], bpid)) {
+ goto send_frames;
+ }
+ /* free the original packet */
+ rte_pktmbuf_free(*bufs);
+ } else {
+ bpid = mempool_to_bpid(mp);
+ if (unlikely((*bufs)->nb_segs > 1)) {
+ if (eth_mbuf_to_sg_fd(*bufs,
+ &fd_arr[loop],
+ mp,
+ bpid))
+ goto send_frames;
+ } else {
+ eth_mbuf_to_fd(*bufs,
+ &fd_arr[loop], bpid);
+ }
+ }
+
+ bufs++;
+ dpaa2_q[loop]++;
+ }
+
+send_frames:
+ frames_to_send = loop;
+ loop = 0;
+ while (loop < frames_to_send) {
+ ret = qbman_swp_enqueue_multiple_desc(swp, &eqdesc[loop],
+ &fd_arr[loop],
+ frames_to_send - loop);
+ if (likely(ret > 0)) {
+ loop += ret;
+ } else {
+ retry_count++;
+ if (retry_count > DPAA2_MAX_TX_RETRY_COUNT)
+ break;
+ }
+ }
+
+ return loop;
+}
+
/* Callback to handle sending ordered packets through WRIOP based interface */
uint16_t
dpaa2_dev_tx_ordered(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
diff --git a/drivers/net/dpaa2/version.map b/drivers/net/dpaa2/version.map
index 2fe61f3442..cc82b8579d 100644
--- a/drivers/net/dpaa2/version.map
+++ b/drivers/net/dpaa2/version.map
@@ -21,6 +21,7 @@ EXPERIMENTAL {
INTERNAL {
global:
+ dpaa2_dev_tx_multi_txq_ordered;
dpaa2_eth_eventq_attach;
dpaa2_eth_eventq_detach;
--
2.17.1
next prev parent reply other threads:[~2021-12-27 16:17 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-06 12:18 [PATCH 00/17] features and fixes on NXP eth devices nipun.gupta
2021-12-06 12:18 ` [PATCH 01/17] bus/fslmc: update MC to 10.29 nipun.gupta
2021-12-06 12:18 ` [PATCH 02/17] bus/fslmc: use dmb oshst for synchronization before I/O nipun.gupta
2021-12-06 12:18 ` [PATCH 03/17] net/dpaa2: warn user in case of high nb desc nipun.gupta
2021-12-06 12:18 ` [PATCH 04/17] net/dpaa2: fix unregistering interrupt handler nipun.gupta
2021-12-06 12:18 ` [PATCH 05/17] net/dpaa2: fix timestamping for IEEE1588 nipun.gupta
2021-12-06 12:18 ` [PATCH 06/17] net/dpaa2: support multiple txqs en-queue for ordered nipun.gupta
2021-12-06 12:18 ` [PATCH 07/17] net/dpaa2: add support for level 2 in traffic management nipun.gupta
2021-12-06 12:18 ` [PATCH 08/17] net/dpaa2: secondary process handling for dpni nipun.gupta
2021-12-06 12:18 ` [PATCH 09/17] bus/fslmc: add and scan dprc devices nipun.gupta
2021-12-06 12:18 ` [PATCH 10/17] net/dpaa2: support recycle loopback port nipun.gupta
2021-12-06 12:18 ` [PATCH 11/17] net/dpaa: check status before configuring shared MAC nipun.gupta
2021-12-06 12:18 ` [PATCH 12/17] net/dpaa: enable checksum for shared MAC interface nipun.gupta
2021-12-06 12:18 ` [PATCH 13/17] net/enetc: add support for VFs nipun.gupta
2021-12-06 12:18 ` [PATCH 14/17] net/pfe: disable HW CRC stripping nipun.gupta
2021-12-06 12:18 ` [PATCH 15/17] net/pfe: reduce driver initialization time nipun.gupta
2021-12-06 12:18 ` [PATCH 16/17] net/pfe: remove setting unused value nipun.gupta
2021-12-06 12:18 ` [PATCH 17/17] net/pfe: fix for 32 bit and PPC compilation nipun.gupta
2021-12-27 16:16 ` [PATCH v2 00/16] features and fixes on NXP eth devices nipun.gupta
2021-12-27 16:16 ` [PATCH v2 01/16] bus/fslmc: update MC to 10.29 nipun.gupta
2021-12-27 16:16 ` [PATCH v2 02/16] bus/fslmc: use dmb oshst for synchronization before I/O nipun.gupta
2021-12-27 16:16 ` [PATCH v2 03/16] net/dpaa2: warn user in case of high nb desc nipun.gupta
2021-12-27 16:16 ` [PATCH v2 04/16] net/dpaa2: fix unregistering interrupt handler nipun.gupta
2021-12-27 16:16 ` [PATCH v2 05/16] net/dpaa2: fix timestamping for IEEE1588 nipun.gupta
2021-12-27 16:16 ` nipun.gupta [this message]
2021-12-27 18:01 ` [PATCH v2 06/16] net/dpaa2: support multiple txqs en-queue for ordered Stephen Hemminger
2022-01-03 5:47 ` Nipun Gupta
2022-01-03 8:39 ` Nipun Gupta
2021-12-27 16:16 ` [PATCH v2 07/16] net/dpaa2: add support for level 2 in traffic management nipun.gupta
2021-12-27 16:16 ` [PATCH v2 08/16] net/dpaa2: secondary process handling for dpni nipun.gupta
2021-12-27 16:16 ` [PATCH v2 09/16] bus/fslmc: add and scan dprc devices nipun.gupta
2021-12-27 16:16 ` [PATCH v2 10/16] net/dpaa2: support recycle loopback port nipun.gupta
2021-12-27 16:16 ` [PATCH v2 11/16] net/dpaa: check status before configuring shared MAC nipun.gupta
2021-12-27 16:16 ` [PATCH v2 12/16] net/dpaa: enable checksum for shared MAC interface nipun.gupta
2021-12-27 16:16 ` [PATCH v2 13/16] net/enetc: add support for VFs nipun.gupta
2021-12-27 16:16 ` [PATCH v2 14/16] net/pfe: disable HW CRC stripping nipun.gupta
2021-12-27 17:49 ` Stephen Hemminger
2022-01-03 6:09 ` Nipun Gupta
2021-12-27 16:16 ` [PATCH v2 15/16] net/pfe: reduce driver initialization time nipun.gupta
2021-12-27 17:57 ` Stephen Hemminger
2022-01-03 5:45 ` Nipun Gupta
2021-12-27 16:16 ` [PATCH v2 16/16] net/pfe: remove setting unused value nipun.gupta
2021-12-27 17:50 ` [PATCH v2 00/16] features and fixes on NXP eth devices Stephen Hemminger
2022-01-03 5:45 ` Nipun Gupta
2022-01-03 10:01 ` [PATCH v3 00/15] " nipun.gupta
2022-01-03 10:01 ` [PATCH v3 01/15] bus/fslmc: update MC to 10.29 nipun.gupta
2022-01-03 10:01 ` [PATCH v3 02/15] bus/fslmc: use dmb oshst for synchronization before I/O nipun.gupta
2022-01-03 10:01 ` [PATCH v3 03/15] net/dpaa2: warn user in case of high nb desc nipun.gupta
2022-01-03 10:01 ` [PATCH v3 04/15] net/dpaa2: fix unregistering interrupt handler nipun.gupta
2022-01-03 10:01 ` [PATCH v3 05/15] net/dpaa2: fix timestamping for IEEE1588 nipun.gupta
2022-01-03 10:01 ` [PATCH v3 06/15] net/dpaa2: support multiple txqs en-queue for ordered nipun.gupta
2022-01-03 10:01 ` [PATCH v3 07/15] net/dpaa2: add support for level 2 in traffic management nipun.gupta
2022-01-03 10:01 ` [PATCH v3 08/15] net/dpaa2: secondary process handling for dpni nipun.gupta
2022-01-03 10:01 ` [PATCH v3 09/15] bus/fslmc: add and scan dprc devices nipun.gupta
2022-01-03 10:01 ` [PATCH v3 10/15] net/dpaa2: support recycle loopback port nipun.gupta
2022-02-01 9:27 ` David Marchand
2022-02-01 9:34 ` Nipun Gupta
2022-02-01 9:43 ` Thomas Monjalon
2022-02-01 9:53 ` [PATCH] net/dpaa2: fix build with musl Thomas Monjalon
2022-02-01 10:10 ` Nipun Gupta
2022-02-01 11:03 ` Thomas Monjalon
2022-01-03 10:01 ` [PATCH v3 11/15] net/dpaa: check status before configuring shared MAC nipun.gupta
2022-01-03 10:01 ` [PATCH v3 12/15] net/dpaa: enable checksum for shared MAC interface nipun.gupta
2022-01-03 10:01 ` [PATCH v3 13/15] net/enetc: add support for VFs nipun.gupta
2022-01-03 10:01 ` [PATCH v3 14/15] net/pfe: reduce driver initialization time nipun.gupta
2022-01-03 10:01 ` [PATCH v3 15/15] net/pfe: remove setting unused value nipun.gupta
2022-01-12 6:05 ` [PATCH v3 00/15] features and fixes on NXP eth devices Hemant Agrawal
2022-01-20 15:26 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211227161645.24359-7-nipun.gupta@nxp.com \
--to=nipun.gupta@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=jun.yang@nxp.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).