From: Nithin Dabilpuram <ndabilpuram@marvell.com>
To: <jerinj@marvell.com>, Nithin Dabilpuram <ndabilpuram@marvell.com>,
"Kiran Kumar K" <kirankumark@marvell.com>,
Sunil Kumar Kori <skori@marvell.com>,
Satha Rao <skoteshwar@marvell.com>
Cc: <dev@dpdk.org>, <ferruh.yigit@intel.com>
Subject: [PATCH v2 10/10] net/cnxk: synchronize inline session create and destroy
Date: Fri, 21 Jan 2022 17:34:24 +0530 [thread overview]
Message-ID: <20220121120424.28166-10-ndabilpuram@marvell.com> (raw)
In-Reply-To: <20220121120424.28166-1-ndabilpuram@marvell.com>
Synchronize inline session create and destroy using spinlock.
Also move security related error prints outside the spinlock.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
---
drivers/net/cnxk/cn10k_ethdev_sec.c | 35 ++++++++++++++++++++++++++++-------
drivers/net/cnxk/cn9k_ethdev_sec.c | 32 ++++++++++++++++++++++++++------
drivers/net/cnxk/cnxk_ethdev.c | 7 +++++--
drivers/net/cnxk/cnxk_ethdev.h | 6 ++++++
4 files changed, 65 insertions(+), 15 deletions(-)
diff --git a/drivers/net/cnxk/cn10k_ethdev_sec.c b/drivers/net/cnxk/cn10k_ethdev_sec.c
index 235c168..12cec0a 100644
--- a/drivers/net/cnxk/cn10k_ethdev_sec.c
+++ b/drivers/net/cnxk/cn10k_ethdev_sec.c
@@ -238,6 +238,8 @@ cn10k_eth_sec_session_create(void *device,
struct rte_crypto_sym_xform *crypto;
struct cnxk_eth_sec_sess *eth_sec;
bool inbound, inl_dev;
+ rte_spinlock_t *lock;
+ char tbuf[128] = {0};
int rc = 0;
if (conf->action_type != RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL)
@@ -272,6 +274,9 @@ cn10k_eth_sec_session_create(void *device,
memset(eth_sec, 0, sizeof(struct cnxk_eth_sec_sess));
sess_priv.u64 = 0;
+ lock = inbound ? &dev->inb.lock : &dev->outb.lock;
+ rte_spinlock_lock(lock);
+
/* Acquire lock on inline dev for inbound */
if (inbound && inl_dev)
roc_nix_inl_dev_lock();
@@ -287,12 +292,14 @@ cn10k_eth_sec_session_create(void *device,
/* Get Inbound SA from NIX_RX_IPSEC_SA_BASE */
sa = roc_nix_inl_inb_sa_get(&dev->nix, inl_dev, ipsec->spi);
if (!sa && dev->inb.inl_dev) {
- plt_err("Failed to create ingress sa, inline dev "
- "not found or spi not in range");
+ snprintf(tbuf, sizeof(tbuf),
+ "Failed to create ingress sa, inline dev "
+ "not found or spi not in range");
rc = -ENOTSUP;
goto mempool_put;
} else if (!sa) {
- plt_err("Failed to create ingress sa");
+ snprintf(tbuf, sizeof(tbuf),
+ "Failed to create ingress sa");
rc = -EFAULT;
goto mempool_put;
}
@@ -301,8 +308,9 @@ cn10k_eth_sec_session_create(void *device,
/* Check if SA is already in use */
if (inb_sa->w2.s.valid) {
- plt_err("Inbound SA with SPI %u already in use",
- ipsec->spi);
+ snprintf(tbuf, sizeof(tbuf),
+ "Inbound SA with SPI %u already in use",
+ ipsec->spi);
rc = -EBUSY;
goto mempool_put;
}
@@ -313,7 +321,8 @@ cn10k_eth_sec_session_create(void *device,
/* Fill inbound sa params */
rc = cnxk_ot_ipsec_inb_sa_fill(inb_sa_dptr, ipsec, crypto);
if (rc) {
- plt_err("Failed to init inbound sa, rc=%d", rc);
+ snprintf(tbuf, sizeof(tbuf),
+ "Failed to init inbound sa, rc=%d", rc);
goto mempool_put;
}
@@ -371,7 +380,8 @@ cn10k_eth_sec_session_create(void *device,
/* Fill outbound sa params */
rc = cnxk_ot_ipsec_outb_sa_fill(outb_sa_dptr, ipsec, crypto);
if (rc) {
- plt_err("Failed to init outbound sa, rc=%d", rc);
+ snprintf(tbuf, sizeof(tbuf),
+ "Failed to init outbound sa, rc=%d", rc);
rc |= cnxk_eth_outb_sa_idx_put(dev, sa_idx);
goto mempool_put;
}
@@ -409,6 +419,7 @@ cn10k_eth_sec_session_create(void *device,
}
if (inbound && inl_dev)
roc_nix_inl_dev_unlock();
+ rte_spinlock_unlock(lock);
plt_nix_dbg("Created %s session with spi=%u, sa_idx=%u inl_dev=%u",
inbound ? "inbound" : "outbound", eth_sec->spi,
@@ -422,7 +433,11 @@ cn10k_eth_sec_session_create(void *device,
mempool_put:
if (inbound && inl_dev)
roc_nix_inl_dev_unlock();
+ rte_spinlock_unlock(lock);
+
rte_mempool_put(mempool, eth_sec);
+ if (rc)
+ plt_err("%s", tbuf);
return rc;
}
@@ -433,12 +448,16 @@ cn10k_eth_sec_session_destroy(void *device, struct rte_security_session *sess)
struct cnxk_eth_dev *dev = cnxk_eth_pmd_priv(eth_dev);
struct cnxk_eth_sec_sess *eth_sec;
struct rte_mempool *mp;
+ rte_spinlock_t *lock;
void *sa_dptr;
eth_sec = cnxk_eth_sec_sess_get_by_sess(dev, sess);
if (!eth_sec)
return -ENOENT;
+ lock = eth_sec->inb ? &dev->inb.lock : &dev->outb.lock;
+ rte_spinlock_lock(lock);
+
if (eth_sec->inl_dev)
roc_nix_inl_dev_lock();
@@ -468,6 +487,8 @@ cn10k_eth_sec_session_destroy(void *device, struct rte_security_session *sess)
if (eth_sec->inl_dev)
roc_nix_inl_dev_unlock();
+ rte_spinlock_unlock(lock);
+
plt_nix_dbg("Destroyed %s session with spi=%u, sa_idx=%u, inl_dev=%u",
eth_sec->inb ? "inbound" : "outbound", eth_sec->spi,
eth_sec->sa_idx, eth_sec->inl_dev);
diff --git a/drivers/net/cnxk/cn9k_ethdev_sec.c b/drivers/net/cnxk/cn9k_ethdev_sec.c
index b070ad5..27930d1 100644
--- a/drivers/net/cnxk/cn9k_ethdev_sec.c
+++ b/drivers/net/cnxk/cn9k_ethdev_sec.c
@@ -146,6 +146,8 @@ cn9k_eth_sec_session_create(void *device,
struct cn9k_sec_sess_priv sess_priv;
struct rte_crypto_sym_xform *crypto;
struct cnxk_eth_sec_sess *eth_sec;
+ rte_spinlock_t *lock;
+ char tbuf[128] = {0};
bool inbound;
int rc = 0;
@@ -174,6 +176,9 @@ cn9k_eth_sec_session_create(void *device,
return -ENOMEM;
}
+ lock = inbound ? &dev->inb.lock : &dev->outb.lock;
+ rte_spinlock_lock(lock);
+
memset(eth_sec, 0, sizeof(struct cnxk_eth_sec_sess));
sess_priv.u64 = 0;
@@ -188,17 +193,19 @@ cn9k_eth_sec_session_create(void *device,
* device always for CN9K.
*/
inb_sa = (struct roc_onf_ipsec_inb_sa *)
- roc_nix_inl_inb_sa_get(&dev->nix, false, ipsec->spi);
+ roc_nix_inl_inb_sa_get(&dev->nix, false, ipsec->spi);
if (!inb_sa) {
- plt_err("Failed to create ingress sa");
+ snprintf(tbuf, sizeof(tbuf),
+ "Failed to create ingress sa");
rc = -EFAULT;
goto mempool_put;
}
/* Check if SA is already in use */
if (inb_sa->ctl.valid) {
- plt_err("Inbound SA with SPI %u already in use",
- ipsec->spi);
+ snprintf(tbuf, sizeof(tbuf),
+ "Inbound SA with SPI %u already in use",
+ ipsec->spi);
rc = -EBUSY;
goto mempool_put;
}
@@ -208,7 +215,8 @@ cn9k_eth_sec_session_create(void *device,
/* Fill inbound sa params */
rc = cnxk_onf_ipsec_inb_sa_fill(inb_sa, ipsec, crypto);
if (rc) {
- plt_err("Failed to init inbound sa, rc=%d", rc);
+ snprintf(tbuf, sizeof(tbuf),
+ "Failed to init inbound sa, rc=%d", rc);
goto mempool_put;
}
@@ -263,7 +271,8 @@ cn9k_eth_sec_session_create(void *device,
/* Fill outbound sa params */
rc = cnxk_onf_ipsec_outb_sa_fill(outb_sa, ipsec, crypto);
if (rc) {
- plt_err("Failed to init outbound sa, rc=%d", rc);
+ snprintf(tbuf, sizeof(tbuf),
+ "Failed to init outbound sa, rc=%d", rc);
rc |= cnxk_eth_outb_sa_idx_put(dev, sa_idx);
goto mempool_put;
}
@@ -300,6 +309,8 @@ cn9k_eth_sec_session_create(void *device,
/* Sync SA content */
plt_atomic_thread_fence(__ATOMIC_ACQ_REL);
+ rte_spinlock_unlock(lock);
+
plt_nix_dbg("Created %s session with spi=%u, sa_idx=%u",
inbound ? "inbound" : "outbound", eth_sec->spi,
eth_sec->sa_idx);
@@ -310,7 +321,10 @@ cn9k_eth_sec_session_create(void *device,
return 0;
mempool_put:
+ rte_spinlock_unlock(lock);
rte_mempool_put(mempool, eth_sec);
+ if (rc)
+ plt_err("%s", tbuf);
return rc;
}
@@ -323,11 +337,15 @@ cn9k_eth_sec_session_destroy(void *device, struct rte_security_session *sess)
struct roc_onf_ipsec_inb_sa *inb_sa;
struct cnxk_eth_sec_sess *eth_sec;
struct rte_mempool *mp;
+ rte_spinlock_t *lock;
eth_sec = cnxk_eth_sec_sess_get_by_sess(dev, sess);
if (!eth_sec)
return -ENOENT;
+ lock = eth_sec->inb ? &dev->inb.lock : &dev->outb.lock;
+ rte_spinlock_lock(lock);
+
if (eth_sec->inb) {
inb_sa = eth_sec->sa;
/* Disable SA */
@@ -349,6 +367,8 @@ cn9k_eth_sec_session_destroy(void *device, struct rte_security_session *sess)
/* Sync SA content */
plt_atomic_thread_fence(__ATOMIC_ACQ_REL);
+ rte_spinlock_unlock(lock);
+
plt_nix_dbg("Destroyed %s session with spi=%u, sa_idx=%u",
eth_sec->inb ? "inbound" : "outbound", eth_sec->spi,
eth_sec->sa_idx);
diff --git a/drivers/net/cnxk/cnxk_ethdev.c b/drivers/net/cnxk/cnxk_ethdev.c
index 74f6255..c2e7f2f 100644
--- a/drivers/net/cnxk/cnxk_ethdev.c
+++ b/drivers/net/cnxk/cnxk_ethdev.c
@@ -1605,8 +1605,6 @@ cnxk_eth_dev_init(struct rte_eth_dev *eth_dev)
sec_ctx->flags =
(RTE_SEC_CTX_F_FAST_SET_MDATA | RTE_SEC_CTX_F_FAST_GET_UDATA);
eth_dev->security_ctx = sec_ctx;
- TAILQ_INIT(&dev->inb.list);
- TAILQ_INIT(&dev->outb.list);
/* For secondary processes, the primary has done all the work */
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
@@ -1642,6 +1640,11 @@ cnxk_eth_dev_init(struct rte_eth_dev *eth_dev)
dev->configured = 0;
dev->ptype_disable = 0;
+ TAILQ_INIT(&dev->inb.list);
+ TAILQ_INIT(&dev->outb.list);
+ rte_spinlock_init(&dev->inb.lock);
+ rte_spinlock_init(&dev->outb.lock);
+
/* For vfs, returned max_entries will be 0. but to keep default mac
* address, one entry must be allocated. so setting up to 1.
*/
diff --git a/drivers/net/cnxk/cnxk_ethdev.h b/drivers/net/cnxk/cnxk_ethdev.h
index 5bfda3d..db1fb4b 100644
--- a/drivers/net/cnxk/cnxk_ethdev.h
+++ b/drivers/net/cnxk/cnxk_ethdev.h
@@ -271,6 +271,9 @@ struct cnxk_eth_dev_sec_inb {
/* DPTR for WRITE_SA microcode op */
void *sa_dptr;
+
+ /* Lock to synchronize sa setup/release */
+ rte_spinlock_t lock;
};
/* Outbound security data */
@@ -304,6 +307,9 @@ struct cnxk_eth_dev_sec_outb {
/* DPTR for WRITE_SA microcode op */
void *sa_dptr;
+
+ /* Lock to synchronize sa setup/release */
+ rte_spinlock_t lock;
};
struct cnxk_eth_dev {
--
2.8.4
prev parent reply other threads:[~2022-01-21 12:05 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-09 9:13 [PATCH 1/8] common/cnxk: fix shift offset for tl3 length disable Nithin Dabilpuram
2021-12-09 9:13 ` [PATCH 2/8] common/cnxk: use for loop in shaper profiles cleanup Nithin Dabilpuram
2022-01-19 16:20 ` Jerin Jacob
2021-12-09 9:13 ` [PATCH 3/8] common/cnxk: change order of frag sizes and infos Nithin Dabilpuram
2022-01-19 16:25 ` Jerin Jacob
2022-01-21 10:03 ` Ferruh Yigit
2021-12-09 9:13 ` [PATCH 4/8] common/cnxk: reset stale values on error debug registers Nithin Dabilpuram
2022-01-19 16:25 ` Jerin Jacob
2021-12-09 9:13 ` [PATCH 5/8] common/cnxk: always use single qint with NIX Nithin Dabilpuram
2022-01-19 16:28 ` Jerin Jacob
2021-12-09 9:13 ` [PATCH 6/8] common/cnxk: handle issues from static analysis Nithin Dabilpuram
2022-01-19 16:44 ` Jerin Jacob
2022-01-21 10:05 ` Ferruh Yigit
2021-12-09 9:13 ` [PATCH 7/8] net/cnxk: improve inbound inline error handling for cn9k Nithin Dabilpuram
2022-01-21 10:06 ` Ferruh Yigit
2021-12-09 9:13 ` [PATCH 8/8] net/cnxk: synchronize inline session create and destroy Nithin Dabilpuram
2022-01-19 16:45 ` Jerin Jacob
2022-01-19 16:15 ` [PATCH 1/8] common/cnxk: fix shift offset for tl3 length disable Jerin Jacob
2022-01-21 10:08 ` Ferruh Yigit
2022-01-21 10:24 ` Nithin Kumar Dabilpuram
2022-01-21 12:04 ` [PATCH v2 01/10] common/cnxk: fix shift offset for TL3 " Nithin Dabilpuram
2022-01-21 12:04 ` [PATCH v2 02/10] common/cnxk: use for loop in shaper profiles cleanup Nithin Dabilpuram
2022-01-21 12:04 ` [PATCH v2 03/10] common/cnxk: fix byte order of frag sizes and infos Nithin Dabilpuram
2022-01-21 12:04 ` [PATCH v2 04/10] common/cnxk: reset stale values on error debug registers Nithin Dabilpuram
2022-01-21 12:04 ` [PATCH v2 05/10] common/cnxk: always use single interrupt ID with NIX Nithin Dabilpuram
2022-01-21 17:16 ` Kevin Traynor
2022-01-23 7:45 ` Jerin Jacob
2022-01-21 12:04 ` [PATCH v2 06/10] common/cnxk: fix null pointer dereferences Nithin Dabilpuram
2022-01-21 12:04 ` [PATCH v2 07/10] common/cnxk: fix uninitialized variable issues Nithin Dabilpuram
2022-01-21 12:04 ` [PATCH v2 08/10] net/cnxk: improve inbound inline error handling for cn9k Nithin Dabilpuram
2022-01-21 12:04 ` [PATCH v2 09/10] common/cnxk: set UDP ports for IPsec UDP encapsulation Nithin Dabilpuram
2022-01-21 12:04 ` Nithin Dabilpuram [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220121120424.28166-10-ndabilpuram@marvell.com \
--to=ndabilpuram@marvell.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=skori@marvell.com \
--cc=skoteshwar@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).