From: Ke Zhang <ke1x.zhang@intel.com>
To: qiming.yang@intel.com, qi.z.zhang@intel.com
Cc: dev@dpdk.org
Subject: [DPDK 3/3] net/ice: Add / Remove VF mac address on DCF representor
Date: Thu, 27 Jan 2022 09:03:12 +0000 [thread overview]
Message-ID: <20220127090312.371891-1-ke1x.zhang@intel.com> (raw)
this feature need to update ice kernel driver (newer than v1.8.0_3)
Signed-off-by: Ke Zhang <ke1x.zhang@intel.com>
---
drivers/net/ice/ice_dcf_ethdev.h | 1 +
drivers/net/ice/ice_dcf_vf_representor.c | 81 +++++++++++++++++++++++-
2 files changed, 81 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ice/ice_dcf_ethdev.h b/drivers/net/ice/ice_dcf_ethdev.h
index 8510e37119..b1bdf39a74 100644
--- a/drivers/net/ice/ice_dcf_ethdev.h
+++ b/drivers/net/ice/ice_dcf_ethdev.h
@@ -50,6 +50,7 @@ struct ice_dcf_vf_repr {
struct rte_ether_addr mac_addr;
uint16_t switch_domain_id;
uint16_t vf_id;
+ uint16_t mac_num; /* Number of MAC addresses */
struct ice_dcf_vlan outer_vlan_info; /* DCF always handle outer VLAN */
};
diff --git a/drivers/net/ice/ice_dcf_vf_representor.c b/drivers/net/ice/ice_dcf_vf_representor.c
index bb353fb45f..9df3553508 100644
--- a/drivers/net/ice/ice_dcf_vf_representor.c
+++ b/drivers/net/ice/ice_dcf_vf_representor.c
@@ -136,7 +136,7 @@ ice_dcf_vf_repr_dev_info_get(struct rte_eth_dev *dev,
return -EIO;
dev_info->device = dev->device;
- dev_info->max_mac_addrs = 1;
+ dev_info->max_mac_addrs = ICE_NUM_MACADDR_MAX;
dev_info->max_rx_queues = dcf_hw->vsi_res->num_queue_pairs;
dev_info->max_tx_queues = dcf_hw->vsi_res->num_queue_pairs;
dev_info->min_rx_bufsize = ICE_BUF_SIZE_MIN;
@@ -513,6 +513,82 @@ ice_dcf_vf_repr_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
}
return ret;
}
+static int
+ice_dcf_repr_add_del_eth_addr(struct ice_dcf_hw *hw,
+ uint16_t vf_id,
+ struct rte_ether_addr *addr,
+ bool add, uint8_t type)
+{
+ struct virtchnl_ether_addr_list *list;
+ struct dcf_virtchnl_cmd args;
+ uint8_t cmd_buffer[sizeof(struct virtchnl_ether_addr_list) +
+ sizeof(struct virtchnl_ether_addr)];
+ int err;
+
+ list = (struct virtchnl_ether_addr_list *)cmd_buffer;
+ list->vsi_id = hw->vf_vsi_map[vf_id] & ~VIRTCHNL_DCF_VF_VSI_VALID;
+ list->num_elements = 1;
+ list->list[0].type = type;
+ rte_memcpy(list->list[0].addr, addr->addr_bytes,
+ sizeof(addr->addr_bytes));
+
+ args.v_op = add ? VIRTCHNL_OP_ADD_ETH_ADDR : VIRTCHNL_OP_DEL_ETH_ADDR;
+ args.req_msg = cmd_buffer;
+ args.req_msglen = sizeof(cmd_buffer);
+
+ err = ice_dcf_execute_virtchnl_cmd(hw, &args);
+ if (err) {
+ PMD_DRV_LOG(ERR, "Fail to execute command %s",
+ add ? "OP_ADD_ETH_ADDR" : "OP_DEL_ETH_ADDR");
+ return err;
+ }
+
+ return 0;
+}
+
+static int
+ice_dcf_vf_repr_add_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *addr,
+ __rte_unused uint32_t index,
+ __rte_unused uint32_t pool)
+{
+ struct ice_dcf_vf_repr *repr = dev->data->dev_private;
+ struct ice_dcf_hw *hw = ice_dcf_vf_repr_hw(repr);
+ int err;
+
+ if (rte_is_zero_ether_addr(addr)) {
+ PMD_DRV_LOG(ERR, "Invalid Ethernet Address");
+ return -EINVAL;
+ }
+
+ err = ice_dcf_repr_add_del_eth_addr(hw, repr->vf_id, addr, true, VIRTCHNL_ETHER_ADDR_EXTRA);
+ if (err) {
+ PMD_DRV_LOG(ERR, "fail to add MAC address");
+ return -EIO;
+ }
+
+ repr->mac_num++;
+
+ return 0;
+}
+
+static void
+ice_dcf_vf_repr_del_mac_addr(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct ice_dcf_vf_repr *repr = dev->data->dev_private;
+ struct ice_dcf_hw *hw = ice_dcf_vf_repr_hw(repr);
+ struct rte_ether_addr *addr;
+ int err;
+
+ addr = &dev->data->mac_addrs[index];
+
+ err = ice_dcf_repr_add_del_eth_addr(hw, repr->vf_id, addr,
+ false, VIRTCHNL_ETHER_ADDR_EXTRA);
+ if (err)
+ PMD_DRV_LOG(ERR, "fail to del MAC address");
+
+ repr->mac_num--;
+}
+
static int
ice_dcf_add_del_vlan_v2(struct rte_eth_dev *dev, uint16_t vlanid, bool add)
{
@@ -581,6 +657,8 @@ static const struct eth_dev_ops ice_dcf_vf_repr_dev_ops = {
.vlan_tpid_set = ice_dcf_vf_repr_vlan_tpid_set,
.stats_reset = ice_dcf_vf_repr_stats_reset,
.stats_get = ice_dcf_vf_repr_stats_get,
+ .mac_addr_add = ice_dcf_vf_repr_add_mac_addr,
+ .mac_addr_remove = ice_dcf_vf_repr_del_mac_addr,
.vlan_filter_set = ice_dcf_vf_repr_vlan_filter_set,
};
@@ -596,6 +674,7 @@ ice_dcf_vf_repr_init(struct rte_eth_dev *vf_rep_eth_dev, void *init_param)
repr->outer_vlan_info.port_vlan_ena = false;
repr->outer_vlan_info.stripping_ena = false;
repr->outer_vlan_info.tpid = RTE_ETHER_TYPE_VLAN;
+ repr->mac_num = 1;
vf_rep_eth_dev->dev_ops = &ice_dcf_vf_repr_dev_ops;
--
2.25.1
reply other threads:[~2022-01-27 9:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220127090312.371891-1-ke1x.zhang@intel.com \
--to=ke1x.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=qi.z.zhang@intel.com \
--cc=qiming.yang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).