DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Min Hu (Connor)" <humin29@huawei.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>, <thomas@monjalon.net>
Subject: [PATCH 1/2] net/bonding: fix promiscuous and allmulticast state
Date: Fri, 28 Jan 2022 10:25:32 +0800	[thread overview]
Message-ID: <20220128022533.44249-2-humin29@huawei.com> (raw)
In-Reply-To: <20220128022533.44249-1-humin29@huawei.com>

Currently, promiscuous or allmulticast state of bonding port will not be
passed to the new primary slave when active/standby switchover. It causes
bugs in some scenario.

For example, promiscuous state of bonding port is off now, primary slave
(called A) is off but secondary slave(called B) is on. Then active/standby
switchover, promiscuous state of the bonding port is off, but the new
primary slave turns to be B and its promiscuous state is still on. It is
not consistent with bonding port. And this patch will fix it.

Fixes: 2efb58cbab6e ("bond: new link bonding library")
Fixes: 68218b87c184 ("net/bonding: prefer allmulti to promiscuous for LACP")
Cc: stable@dpdk.org

Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
---
 drivers/net/bonding/rte_eth_bond_pmd.c | 70 ++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index c72fc64806..ba587e60bf 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -2691,6 +2691,39 @@ bond_ethdev_promiscuous_disable(struct rte_eth_dev *dev)
 	return ret;
 }
 
+static int
+bond_ethdev_promiscuous_update(struct rte_eth_dev *dev)
+{
+	struct bond_dev_private *internals = dev->data->dev_private;
+	uint16_t port_id = internals->current_primary_port;
+
+	switch (internals->mode) {
+	case BONDING_MODE_ROUND_ROBIN:
+	case BONDING_MODE_BALANCE:
+	case BONDING_MODE_BROADCAST:
+	case BONDING_MODE_8023AD:
+		/* As promiscuous mode is propagated to all slaves for these
+		 * mode, no need to update for bonding device.
+		 */
+		break;
+	case BONDING_MODE_ACTIVE_BACKUP:
+	case BONDING_MODE_TLB:
+	case BONDING_MODE_ALB:
+	default:
+		/* As promiscuous mode is propagated only to primary slave
+		 * for these mode. When active/standby switchover, promiscuous
+		 * mode should be set to new primary slave according to bonding
+		 * device.
+		 */
+		if (rte_eth_promiscuous_get(internals->port_id) == 1)
+			rte_eth_promiscuous_enable(port_id);
+		else
+			rte_eth_promiscuous_disable(port_id);
+	}
+
+	return 0;
+}
+
 static int
 bond_ethdev_allmulticast_enable(struct rte_eth_dev *eth_dev)
 {
@@ -2804,6 +2837,39 @@ bond_ethdev_allmulticast_disable(struct rte_eth_dev *eth_dev)
 	return ret;
 }
 
+static int
+bond_ethdev_allmulticast_update(struct rte_eth_dev *dev)
+{
+	struct bond_dev_private *internals = dev->data->dev_private;
+	uint16_t port_id = internals->current_primary_port;
+
+	switch (internals->mode) {
+	case BONDING_MODE_ROUND_ROBIN:
+	case BONDING_MODE_BALANCE:
+	case BONDING_MODE_BROADCAST:
+	case BONDING_MODE_8023AD:
+		/* As allmulticast mode is propagated to all slaves for these
+		 * mode, no need to update for bonding device.
+		 */
+		break;
+	case BONDING_MODE_ACTIVE_BACKUP:
+	case BONDING_MODE_TLB:
+	case BONDING_MODE_ALB:
+	default:
+		/* As allmulticast mode is propagated only to primary slave
+		 * for these mode. When active/standby switchover, allmulticast
+		 * mode should be set to new primary slave according to bonding
+		 * device.
+		 */
+		if (rte_eth_allmulticast_get(internals->port_id) == 1)
+			rte_eth_allmulticast_enable(port_id);
+		else
+			rte_eth_allmulticast_disable(port_id);
+	}
+
+	return 0;
+}
+
 static void
 bond_ethdev_delayed_lsc_propagation(void *arg)
 {
@@ -2893,6 +2959,8 @@ bond_ethdev_lsc_event_callback(uint16_t port_id, enum rte_eth_event_type type,
 			lsc_flag = 1;
 
 			mac_address_slaves_update(bonded_eth_dev);
+			bond_ethdev_promiscuous_update(bonded_eth_dev);
+			bond_ethdev_allmulticast_update(bonded_eth_dev);
 		}
 
 		activate_slave(bonded_eth_dev, port_id);
@@ -2922,6 +2990,8 @@ bond_ethdev_lsc_event_callback(uint16_t port_id, enum rte_eth_event_type type,
 			else
 				internals->current_primary_port = internals->primary_port;
 			mac_address_slaves_update(bonded_eth_dev);
+			bond_ethdev_promiscuous_update(bonded_eth_dev);
+			bond_ethdev_allmulticast_update(bonded_eth_dev);
 		}
 	}
 
-- 
2.33.0


  reply	other threads:[~2022-01-28  2:25 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-28  2:25 [PATCH 0/2] bugfix for bonding Min Hu (Connor)
2022-01-28  2:25 ` Min Hu (Connor) [this message]
2022-01-28  2:25 ` [PATCH 2/2] net/bonding: fix reference count on mbufs Min Hu (Connor)
2022-01-31 14:19 ` [PATCH 0/2] bugfix for bonding Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220128022533.44249-2-humin29@huawei.com \
    --to=humin29@huawei.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).