From: Ciara Loftus <ciara.loftus@intel.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, bruce.richardson@intel.com,
Ciara Loftus <ciara.loftus@intel.com>
Subject: [PATCH v3] net/af_xdp: use libxdp if available
Date: Fri, 28 Jan 2022 09:50:29 +0000 [thread overview]
Message-ID: <20220128095029.4402-1-ciara.loftus@intel.com> (raw)
In-Reply-To: <20220125072043.1590-1-ciara.loftus@intel.com>
AF_XDP support is deprecated in libbpf since v0.7.0 [1]. The libxdp library
now provides the functionality which once was in libbpf and which the
AF_XDP PMD relies on. This commit updates the AF_XDP meson build to use the
libxdp library if a version >= v1.2.2 is available. If it is not available,
only versions of libbpf prior to v0.7.0 are allowed, as they still contain
the required AF_XDP functionality.
libbpf still remains a dependency even if libxdp is present, as we use
libbpf APIs for program loading.
The minimum required kernel version for libxdp for use with AF_XDP is v5.3.
For the library to be fully-featured, a kernel v5.10 or newer is
recommended. The full compatibility information can be found in the libxdp
README.
v1.2.2 of libxdp includes an important fix required for linking with DPDK
which is why this version or greater is required. Meson uses pkg-config to
verify the version of libxdp on the system, so it is necessary that the
library is discoverable using pkg-config in order for the PMD to use it. To
verify this, you can run: pkg-config --modversion libxdp
[1] https://github.com/libbpf/libbpf/commit/277846bc6c15
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
---
v3:
* Use cflags instead of writing to the build config
* Change flag names to suit convention.
v2:
* Set minimum libxdp version at v1.2.2
RFC -> v1:
* Set minimum libxdp version at v1.3.0
* Don't provide alternative to discovery via pkg-config
* Add missing newline to end of file
---
doc/guides/nics/af_xdp.rst | 6 ++--
doc/guides/rel_notes/release_22_03.rst | 4 +++
drivers/net/af_xdp/compat.h | 6 +++-
drivers/net/af_xdp/meson.build | 39 +++++++++++++++++++++-----
drivers/net/af_xdp/rte_eth_af_xdp.c | 1 -
5 files changed, 43 insertions(+), 13 deletions(-)
diff --git a/doc/guides/nics/af_xdp.rst b/doc/guides/nics/af_xdp.rst
index c9d0e1ad6c..db02ea1984 100644
--- a/doc/guides/nics/af_xdp.rst
+++ b/doc/guides/nics/af_xdp.rst
@@ -43,9 +43,7 @@ Prerequisites
This is a Linux-specific PMD, thus the following prerequisites apply:
* A Linux Kernel (version > v4.18) with XDP sockets configuration enabled;
-* libbpf (within kernel version > v5.1-rc4) with latest af_xdp support installed,
- User can install libbpf via `make install_lib` && `make install_headers` in
- <kernel src tree>/tools/lib/bpf;
+* Both libxdp >=v1.2.2 and libbpf libraries installed, or, libbpf <=v0.6.0
* A Kernel bound interface to attach to;
* For need_wakeup feature, it requires kernel version later than v5.3-rc1;
* For PMD zero copy, it requires kernel version later than v5.4-rc1;
@@ -143,4 +141,4 @@ Limitations
NAPI context from a watchdog timer instead of from softirqs. More information
on this feature can be found at [1].
- [1] https://lwn.net/Articles/837010/
\ No newline at end of file
+ [1] https://lwn.net/Articles/837010/
diff --git a/doc/guides/rel_notes/release_22_03.rst b/doc/guides/rel_notes/release_22_03.rst
index 3bc0630c7c..68ef02cb54 100644
--- a/doc/guides/rel_notes/release_22_03.rst
+++ b/doc/guides/rel_notes/release_22_03.rst
@@ -69,6 +69,10 @@ New Features
The new API ``rte_event_eth_rx_adapter_event_port_get()`` was added.
+* **Update AF_XDP PMD**
+
+ * Added support for libxdp >=v1.2.2.
+
Removed Items
-------------
diff --git a/drivers/net/af_xdp/compat.h b/drivers/net/af_xdp/compat.h
index 3880dc7dd7..bf40c6572e 100644
--- a/drivers/net/af_xdp/compat.h
+++ b/drivers/net/af_xdp/compat.h
@@ -2,12 +2,16 @@
* Copyright(c) 2020 Intel Corporation.
*/
+#ifdef RTE_NET_AF_XDP_LIBXDP
+#include <xdp/xsk.h>
+#else
#include <bpf/xsk.h>
+#endif
#include <linux/version.h>
#include <poll.h>
#if KERNEL_VERSION(5, 10, 0) <= LINUX_VERSION_CODE && \
- defined(RTE_LIBRTE_AF_XDP_PMD_SHARED_UMEM)
+ defined(RTE_NET_AF_XDP_SHARED_UMEM)
#define ETH_AF_XDP_SHARED_UMEM 1
#endif
diff --git a/drivers/net/af_xdp/meson.build b/drivers/net/af_xdp/meson.build
index 3ed2b29784..93e895eab9 100644
--- a/drivers/net/af_xdp/meson.build
+++ b/drivers/net/af_xdp/meson.build
@@ -9,19 +9,44 @@ endif
sources = files('rte_eth_af_xdp.c')
+xdp_dep = dependency('libxdp', version : '>=1.2.2', required: false, method: 'pkg-config')
bpf_dep = dependency('libbpf', required: false, method: 'pkg-config')
if not bpf_dep.found()
bpf_dep = cc.find_library('bpf', required: false)
endif
-if bpf_dep.found() and cc.has_header('bpf/xsk.h') and cc.has_header('linux/if_xdp.h')
- ext_deps += bpf_dep
- bpf_ver_dep = dependency('libbpf', version : '>=0.2.0',
- required: false, method: 'pkg-config')
- if bpf_ver_dep.found()
- dpdk_conf.set('RTE_LIBRTE_AF_XDP_PMD_SHARED_UMEM', 1)
+if cc.has_header('linux/if_xdp.h')
+ if xdp_dep.found() and cc.has_header('xdp/xsk.h')
+ if bpf_dep.found() and cc.has_header('bpf/bpf.h')
+ cflags += ['-DRTE_NET_AF_XDP_LIBXDP']
+ cflags += ['-DRTE_NET_AF_XDP_SHARED_UMEM']
+ ext_deps += xdp_dep
+ ext_deps += bpf_dep
+ else
+ build = false
+ reason = 'missing dependency, libbpf'
+ endif
+ elif bpf_dep.found() and cc.has_header('bpf/xsk.h') and cc.has_header('bpf/bpf.h')
+ # libxdp not found. Rely solely on libbpf for xsk functionality
+ # which is only available in versions <= v0.6.0.
+ bpf_ver_dep = dependency('libbpf', version : '<=0.6.0',
+ required: false, method: 'pkg-config')
+ if bpf_ver_dep.found()
+ ext_deps += bpf_dep
+ bpf_shumem_ver_dep = dependency('libbpf', version : '>=0.2.0',
+ required: false, method: 'pkg-config')
+ if bpf_shumem_ver_dep.found()
+ cflags += ['-DRTE_NET_AF_XDP_SHARED_UMEM']
+ endif
+ else
+ build = false
+ reason = 'missing dependency, "libxdp" or "libbpf <= v0.6.0"'
+ endif
+ else
+ build = false
+ reason = 'missing dependency, "libxdp" and "libbpf"'
endif
else
build = false
- reason = 'missing dependency, "libbpf"'
+ reason = 'missing header, "linux/if_xdp.h"'
endif
diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c b/drivers/net/af_xdp/rte_eth_af_xdp.c
index 96c2c9d939..5d89bebb01 100644
--- a/drivers/net/af_xdp/rte_eth_af_xdp.c
+++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
@@ -16,7 +16,6 @@
#include <linux/sockios.h>
#include "af_xdp_deps.h"
#include <bpf/bpf.h>
-#include <bpf/xsk.h>
#include <rte_ethdev.h>
#include <ethdev_driver.h>
--
2.17.1
next prev parent reply other threads:[~2022-01-28 9:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-10 10:58 [RFC PATCH] " Ciara Loftus
2022-01-12 13:07 ` [PATCH] " Ciara Loftus
2022-01-25 7:20 ` [PATCH v2] " Ciara Loftus
2022-01-25 9:27 ` Bruce Richardson
2022-01-27 8:42 ` Loftus, Ciara
2022-01-28 9:50 ` Ciara Loftus [this message]
2022-01-31 17:59 ` [PATCH v3] " Ferruh Yigit
2022-01-31 18:05 ` Bruce Richardson
2022-02-01 10:06 ` Ferruh Yigit
2022-02-01 10:11 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220128095029.4402-1-ciara.loftus@intel.com \
--to=ciara.loftus@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).