From: Archana Muniganti <marchana@marvell.com>
To: <gakhil@marvell.com>, <radu.nicolau@intel.com>,
<roy.fan.zhang@intel.com>, <hemant.agrawal@nxp.com>,
<konstantin.ananyev@intel.com>
Cc: Archana Muniganti <marchana@marvell.com>, <anoobj@marvell.com>,
<ktejasree@marvell.com>, <adwivedi@marvell.com>,
<jerinj@marvell.com>, <dev@dpdk.org>
Subject: [PATCH 2/3] test/crypto: add AH test vectors
Date: Fri, 8 Apr 2022 15:46:24 +0530 [thread overview]
Message-ID: <20220408101625.12020-3-marchana@marvell.com> (raw)
In-Reply-To: <20220408101625.12020-1-marchana@marvell.com>
Added tunnel and transport AH known test vectors for
SHA256 HMAC.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
---
app/test/test_cryptodev.c | 33 ++-
...st_cryptodev_security_ipsec_test_vectors.h | 210 ++++++++++++++++++
doc/guides/rel_notes/release_22_03.rst | 1 +
3 files changed, 240 insertions(+), 4 deletions(-)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index eda4a5b6f1..e152d45e1c 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -9139,6 +9139,8 @@ test_ipsec_proto_process(const struct ipsec_test_data td[],
0x0000, 0x001a};
uint16_t v6_dst[8] = {0x2001, 0x0470, 0xe5bf, 0xdead, 0x4957, 0x2174,
0xe82c, 0x4887};
+ const struct rte_ipv4_hdr *ipv4 =
+ (const struct rte_ipv4_hdr *)td[0].output_text.data;
struct crypto_testsuite_params *ts_params = &testsuite_params;
struct crypto_unittest_params *ut_params = &unittest_params;
struct rte_security_capability_idx sec_cap_idx;
@@ -9147,11 +9149,10 @@ test_ipsec_proto_process(const struct ipsec_test_data td[],
uint8_t dev_id = ts_params->valid_devs[0];
enum rte_security_ipsec_sa_direction dir;
struct ipsec_test_data *res_d_tmp = NULL;
- uint32_t src = RTE_IPV4(192, 168, 1, 0);
- uint32_t dst = RTE_IPV4(192, 168, 1, 1);
int salt_len, i, ret = TEST_SUCCESS;
struct rte_security_ctx *ctx;
uint8_t *input_text;
+ uint32_t src, dst;
uint32_t verify;
ut_params->type = RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL;
@@ -9165,6 +9166,9 @@ test_ipsec_proto_process(const struct ipsec_test_data td[],
dir = ipsec_xform.direction;
verify = flags->tunnel_hdr_verify;
+ memcpy(&src, &ipv4->src_addr, sizeof(ipv4->src_addr));
+ memcpy(&dst, &ipv4->dst_addr, sizeof(ipv4->dst_addr));
+
if ((dir == RTE_SECURITY_IPSEC_SA_DIR_INGRESS) && verify) {
if (verify == RTE_SECURITY_IPSEC_TUNNEL_VERIFY_SRC_DST_ADDR)
src += 1;
@@ -9431,8 +9435,9 @@ test_ipsec_proto_known_vec(const void *test_data)
memcpy(&td_outb, test_data, sizeof(td_outb));
- if (td_outb.aead ||
- td_outb.xform.chain.cipher.cipher.algo != RTE_CRYPTO_CIPHER_NULL) {
+ if ((td_outb.ipsec_xform.proto != RTE_SECURITY_IPSEC_SA_PROTO_AH) &&
+ (td_outb.aead || (td_outb.xform.chain.cipher.cipher.algo !=
+ RTE_CRYPTO_CIPHER_NULL))) {
/* Disable IV gen to be able to test with known vectors */
td_outb.ipsec_xform.options.iv_gen_disable = 1;
}
@@ -15082,6 +15087,16 @@ static struct unit_test_suite ipsec_proto_testsuite = {
ut_setup_security, ut_teardown,
test_ipsec_proto_known_vec,
&pkt_null_aes_xcbc),
+ TEST_CASE_NAMED_WITH_DATA(
+ "Outbound known vector (AH tunnel mode IPv4 HMAC-SHA256)",
+ ut_setup_security, ut_teardown,
+ test_ipsec_proto_known_vec,
+ &pkt_ah_tunnel_sha256),
+ TEST_CASE_NAMED_WITH_DATA(
+ "Outbound known vector (AH transport mode IPv4 HMAC-SHA256)",
+ ut_setup_security, ut_teardown,
+ test_ipsec_proto_known_vec,
+ &pkt_ah_transport_sha256),
TEST_CASE_NAMED_WITH_DATA(
"Outbound fragmented packet",
ut_setup_security, ut_teardown,
@@ -15132,6 +15147,16 @@ static struct unit_test_suite ipsec_proto_testsuite = {
ut_setup_security, ut_teardown,
test_ipsec_proto_known_vec_inb,
&pkt_null_aes_xcbc),
+ TEST_CASE_NAMED_WITH_DATA(
+ "Inbound known vector (AH tunnel mode IPv4 HMAC-SHA256)",
+ ut_setup_security, ut_teardown,
+ test_ipsec_proto_known_vec_inb,
+ &pkt_ah_tunnel_sha256),
+ TEST_CASE_NAMED_WITH_DATA(
+ "Inbound known vector (AH transport mode IPv4 HMAC-SHA256)",
+ ut_setup_security, ut_teardown,
+ test_ipsec_proto_known_vec_inb,
+ &pkt_ah_transport_sha256),
TEST_CASE_NAMED_ST(
"Combined test alg list",
ut_setup_security, ut_teardown,
diff --git a/app/test/test_cryptodev_security_ipsec_test_vectors.h b/app/test/test_cryptodev_security_ipsec_test_vectors.h
index fe2fd855df..f50986e9b4 100644
--- a/app/test/test_cryptodev_security_ipsec_test_vectors.h
+++ b/app/test/test_cryptodev_security_ipsec_test_vectors.h
@@ -1153,4 +1153,214 @@ struct ipsec_test_data pkt_null_aes_xcbc = {
},
};
+struct ipsec_test_data pkt_ah_tunnel_sha256 = {
+ .auth_key = {
+ .data = {
+ 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a,
+ 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a,
+ 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a,
+ 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a,
+ },
+ },
+ .input_text = {
+ .data = {
+ /* IP */
+ 0x45, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00,
+ 0x40, 0x01, 0xac, 0x27, 0xc0, 0xa8, 0x6f, 0x02,
+ 0xc0, 0xa8, 0xde, 0x02,
+
+ /* ICMP */
+ 0x08, 0x00, 0xfb, 0x37, 0x12, 0x34, 0x00, 0x00,
+ 0xba, 0xbe, 0x01, 0x23, 0x45, 0x67, 0xca, 0xfe,
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
+ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
+ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
+ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
+ 0x58, 0x59, 0x5a, 0x5b,
+ },
+ .len = 128,
+ },
+ .output_text = {
+ .data = {
+ /* IP outer header */
+ 0x45, 0x00, 0x00, 0xb0, 0x00, 0x01, 0x00, 0x00,
+ 0x00, 0x33, 0x59, 0x16, 0x0a, 0x00, 0x6f, 0x02,
+ 0x0a, 0x00, 0xde, 0x02,
+
+ /* AH */
+ 0x04, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7b,
+ 0x00, 0x00, 0x00, 0x01,
+ 0x59, 0xfd, 0xb4, 0xdb, 0x70, 0x57, 0x4f, 0x27,
+ 0x72, 0xfe, 0xc9, 0xdc, 0xb2, 0xf0, 0xab, 0xea,
+
+ /* Inner IP */
+ 0x45, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00,
+ 0x40, 0x01, 0xac, 0x27, 0xc0, 0xa8, 0x6f, 0x02,
+ 0xc0, 0xa8, 0xde, 0x02,
+
+ /* ICMP */
+ 0x08, 0x00, 0xfb, 0x37, 0x12, 0x34, 0x00, 0x00,
+ 0xba, 0xbe, 0x01, 0x23, 0x45, 0x67, 0xca, 0xfe,
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
+ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
+ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
+ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
+ 0x58, 0x59, 0x5a, 0x5b,
+ },
+ .len = 176,
+ },
+
+ .ipsec_xform = {
+ .spi = 0x7b,
+ .options.esn = 0,
+ .options.udp_encap = 0,
+ .options.copy_dscp = 0,
+ .options.copy_flabel = 0,
+ .options.copy_df = 0,
+ .options.dec_ttl = 0,
+ .options.ecn = 0,
+ .options.stats = 0,
+ .options.tunnel_hdr_verify = 0,
+ .options.ip_csum_enable = 0,
+ .options.l4_csum_enable = 0,
+ .direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
+ .proto = RTE_SECURITY_IPSEC_SA_PROTO_AH,
+ .mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
+ .tunnel.type = RTE_SECURITY_IPSEC_TUNNEL_IPV4,
+ .replay_win_sz = 0,
+ },
+
+ .aead = false,
+ .auth_only = true,
+
+ .xform = {
+ .chain.auth = {
+ .next = NULL,
+ .type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ .auth = {
+ .op = RTE_CRYPTO_AUTH_OP_GENERATE,
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .key.length = 32,
+ .digest_length = 16,
+ },
+ },
+ },
+};
+
+struct ipsec_test_data pkt_ah_transport_sha256 = {
+ .auth_key = {
+ .data = {
+ 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a,
+ 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a,
+ 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a,
+ 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a, 0x5a,
+ },
+ },
+ .input_text = {
+ .data = {
+ /* IP */
+ 0x45, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00,
+ 0x40, 0x01, 0xac, 0x27, 0xc0, 0xa8, 0x6f, 0x02,
+ 0xc0, 0xa8, 0xde, 0x02,
+
+ /* ICMP */
+ 0x08, 0x00, 0xfb, 0x37, 0x12, 0x34, 0x00, 0x00,
+ 0xba, 0xbe, 0x01, 0x23, 0x45, 0x67, 0xca, 0xfe,
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
+ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
+ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
+ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
+ 0x58, 0x59, 0x5a, 0x5b,
+ },
+ .len = 128,
+ },
+ .output_text = {
+ .data = {
+ /* IP outer header */
+ 0x45, 0x00, 0x00, 0x9c, 0x00, 0x00, 0x00, 0x00,
+ 0x40, 0x33, 0xab, 0xd9, 0xc0, 0xa8, 0x6f, 0x02,
+ 0xc0, 0xa8, 0xde, 0x02,
+
+ /* AH */
+ 0x01, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7b,
+ 0x00, 0x00, 0x00, 0x01,
+ 0x6c, 0x2e, 0xf7, 0x1f, 0x7c, 0x70, 0x39, 0xa3,
+ 0x4a, 0x77, 0x01, 0x47, 0x9e, 0x45, 0x73, 0x51,
+
+ /* ICMP */
+ 0x08, 0x00, 0xfb, 0x37, 0x12, 0x34, 0x00, 0x00,
+ 0xba, 0xbe, 0x01, 0x23, 0x45, 0x67, 0xca, 0xfe,
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
+ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
+ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
+ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
+ 0x58, 0x59, 0x5a, 0x5b,
+ },
+ .len = 156,
+ },
+
+ .ipsec_xform = {
+ .spi = 0x7b,
+ .options.esn = 0,
+ .options.udp_encap = 0,
+ .options.copy_dscp = 0,
+ .options.copy_flabel = 0,
+ .options.copy_df = 0,
+ .options.dec_ttl = 0,
+ .options.ecn = 0,
+ .options.stats = 0,
+ .options.tunnel_hdr_verify = 0,
+ .options.ip_csum_enable = 0,
+ .options.l4_csum_enable = 0,
+ .direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
+ .proto = RTE_SECURITY_IPSEC_SA_PROTO_AH,
+ .mode = RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT,
+ .replay_win_sz = 0,
+ },
+
+ .aead = false,
+ .auth_only = true,
+
+ .xform = {
+ .chain.auth = {
+ .next = NULL,
+ .type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ .auth = {
+ .op = RTE_CRYPTO_AUTH_OP_GENERATE,
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .key.length = 32,
+ .digest_length = 16,
+ },
+ },
+ },
+};
+
#endif /* TEST_CRYPTODEV_SECURITY_IPSEC_TEST_VECTORS_H_ */
diff --git a/doc/guides/rel_notes/release_22_03.rst b/doc/guides/rel_notes/release_22_03.rst
index 9eaf9919ca..8874440af2 100644
--- a/doc/guides/rel_notes/release_22_03.rst
+++ b/doc/guides/rel_notes/release_22_03.rst
@@ -193,6 +193,7 @@ New Features
* **Updated lookaside protocol (IPsec) tests in dpdk-test.**
* Added tests to verify IPSec AH in combined mode.
+ * Added AH known test vectors for SHA256 HMAC.
Removed Items
-------------
--
2.22.0
next prev parent reply other threads:[~2022-04-08 10:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 10:16 [PATCH 0/3] add IPsec AH test cases Archana Muniganti
2022-04-08 10:16 ` [PATCH 1/3] test/crypto: add AH under combined mode UT Archana Muniganti
2022-04-08 10:16 ` Archana Muniganti [this message]
2022-04-08 10:16 ` [PATCH 3/3] test/crypto: add AH AES-GMAC test vectors Archana Muniganti
2022-04-16 19:13 ` [PATCH 0/3] add IPsec AH test cases Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220408101625.12020-3-marchana@marvell.com \
--to=marchana@marvell.com \
--cc=adwivedi@marvell.com \
--cc=anoobj@marvell.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=hemant.agrawal@nxp.com \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=ktejasree@marvell.com \
--cc=radu.nicolau@intel.com \
--cc=roy.fan.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).