From: Nithin Dabilpuram <ndabilpuram@marvell.com>
To: <jerinj@marvell.com>, Nithin Dabilpuram <ndabilpuram@marvell.com>,
"Kiran Kumar K" <kirankumark@marvell.com>,
Sunil Kumar Kori <skori@marvell.com>,
Satha Rao <skoteshwar@marvell.com>
Cc: <dev@dpdk.org>
Subject: [PATCH v2 10/28] net/cnxk: support loopback mode on AF VF's
Date: Fri, 22 Apr 2022 16:16:51 +0530 [thread overview]
Message-ID: <20220422104709.20722-10-ndabilpuram@marvell.com> (raw)
In-Reply-To: <20220422104709.20722-1-ndabilpuram@marvell.com>
Support internal loopback mode on AF VF's using RoC by setting
Tx channel same as Rx channel.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
---
drivers/net/cnxk/cnxk_ethdev.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/cnxk/cnxk_ethdev.c b/drivers/net/cnxk/cnxk_ethdev.c
index bd31a9a..e1b1e16 100644
--- a/drivers/net/cnxk/cnxk_ethdev.c
+++ b/drivers/net/cnxk/cnxk_ethdev.c
@@ -1119,6 +1119,9 @@ cnxk_nix_configure(struct rte_eth_dev *eth_dev)
nb_rxq = RTE_MAX(data->nb_rx_queues, 1);
nb_txq = RTE_MAX(data->nb_tx_queues, 1);
+ if (roc_nix_is_lbk(nix))
+ nix->enable_loop = eth_dev->data->dev_conf.lpbk_mode;
+
/* Alloc a nix lf */
rc = roc_nix_lf_alloc(nix, nb_rxq, nb_txq, rx_cfg);
if (rc) {
@@ -1242,6 +1245,9 @@ cnxk_nix_configure(struct rte_eth_dev *eth_dev)
}
}
+ if (roc_nix_is_lbk(nix))
+ goto skip_lbk_setup;
+
/* Configure loop back mode */
rc = roc_nix_mac_loopback_enable(nix,
eth_dev->data->dev_conf.lpbk_mode);
@@ -1250,6 +1256,7 @@ cnxk_nix_configure(struct rte_eth_dev *eth_dev)
goto cq_fini;
}
+skip_lbk_setup:
/* Setup Inline security support */
rc = nix_security_setup(dev);
if (rc)
--
2.8.4
next prev parent reply other threads:[~2022-04-22 10:48 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-22 10:46 [PATCH v2 01/28] common/cnxk: add multi channel support for SDP send queues Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 02/28] net/cnxk: add receive channel backpressure for SDP Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 03/28] common/cnxk: add new pkind for CPT when ts is enabled Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 04/28] common/cnxk: support to configure the ts pkind in CPT Nithin Dabilpuram
2022-04-26 10:12 ` Ray Kinsella
2022-04-22 10:46 ` [PATCH v2 05/28] common/cnxk: fix SQ flush sequence Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 06/28] common/cnxk: skip probing SoC environment for CN9k Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 07/28] common/cnxk: fix issues in soft expiry disable path Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 08/28] common/cnxk: convert warning to debug print Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 09/28] common/cnxk: use aggregate level rr prio from mbox Nithin Dabilpuram
2022-04-22 10:46 ` Nithin Dabilpuram [this message]
2022-04-22 10:46 ` [PATCH v2 11/28] net/cnxk: update LBK ethdev link info Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 12/28] net/cnxk: add barrier after meta batch free in scalar Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 13/28] net/cnxk: disable default inner chksum for outb inline Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 14/28] net/cnxk: fix roundup size with transport mode Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 15/28] net/cnxk: update inline device in ethdev telemetry Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 16/28] net/cnxk: change env for debug IV Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 17/28] net/cnxk: reset offload flag if reassembly is disabled Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 18/28] net/cnxk: support decrement TTL for inline IPsec Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 19/28] net/cnxk: optimize Rx fast path for security pkts Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 20/28] net/cnxk: update olflags with L3/L4 csum offload Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 21/28] net/cnxk: add capabilities for IPsec crypto algos Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 22/28] net/cnxk: add capabilities for IPsec options Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 23/28] net/cnxk: support security stats Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 24/28] net/cnxk: add support for flow control for outbound inline Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 25/28] net/cnxk: perform early MTU setup for eventmode Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 26/28] common/cnxk: allow lesser inline inbound sa sizes Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 27/28] net/cnxk: setup variable inline inbound SA Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 28/28] net/cnxk: fix multi-seg extraction in vwqe path Nithin Dabilpuram
2022-04-22 10:54 ` Pavan Nikhilesh Bhagavatula
2022-05-03 17:36 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220422104709.20722-10-ndabilpuram@marvell.com \
--to=ndabilpuram@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=skori@marvell.com \
--cc=skoteshwar@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).