From: Nithin Dabilpuram <ndabilpuram@marvell.com>
To: <jerinj@marvell.com>, Nithin Dabilpuram <ndabilpuram@marvell.com>,
"Kiran Kumar K" <kirankumark@marvell.com>,
Sunil Kumar Kori <skori@marvell.com>,
Satha Rao <skoteshwar@marvell.com>
Cc: <dev@dpdk.org>
Subject: [PATCH v2 27/28] net/cnxk: setup variable inline inbound SA
Date: Fri, 22 Apr 2022 16:17:08 +0530 [thread overview]
Message-ID: <20220422104709.20722-27-ndabilpuram@marvell.com> (raw)
In-Reply-To: <20220422104709.20722-1-ndabilpuram@marvell.com>
Setup inline inbound SA assuming variable size defined
at compile time.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
---
drivers/net/cnxk/cn10k_ethdev_sec.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/net/cnxk/cn10k_ethdev_sec.c b/drivers/net/cnxk/cn10k_ethdev_sec.c
index 7c4988b..65519ee 100644
--- a/drivers/net/cnxk/cn10k_ethdev_sec.c
+++ b/drivers/net/cnxk/cn10k_ethdev_sec.c
@@ -259,7 +259,7 @@ static const struct rte_security_capability cn10k_eth_sec_capabilities[] = {
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
.direction = RTE_SECURITY_IPSEC_SA_DIR_INGRESS,
- .replay_win_sz_max = ROC_AR_WIN_SIZE_MAX,
+ .replay_win_sz_max = ROC_NIX_INL_OT_IPSEC_AR_WIN_SZ_MAX,
.options = {
.udp_encap = 1,
.udp_ports_verify = 1,
@@ -284,7 +284,7 @@ static const struct rte_security_capability cn10k_eth_sec_capabilities[] = {
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
.direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
- .replay_win_sz_max = ROC_AR_WIN_SIZE_MAX,
+ .replay_win_sz_max = ROC_NIX_INL_OT_IPSEC_AR_WIN_SZ_MAX,
.options = {
.iv_gen_disable = 1,
.udp_encap = 1,
@@ -309,7 +309,7 @@ static const struct rte_security_capability cn10k_eth_sec_capabilities[] = {
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT,
.direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
- .replay_win_sz_max = ROC_AR_WIN_SIZE_MAX,
+ .replay_win_sz_max = ROC_NIX_INL_OT_IPSEC_AR_WIN_SZ_MAX,
.options = {
.iv_gen_disable = 1,
.udp_encap = 1,
@@ -333,7 +333,7 @@ static const struct rte_security_capability cn10k_eth_sec_capabilities[] = {
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT,
.direction = RTE_SECURITY_IPSEC_SA_DIR_INGRESS,
- .replay_win_sz_max = ROC_AR_WIN_SIZE_MAX,
+ .replay_win_sz_max = ROC_NIX_INL_OT_IPSEC_AR_WIN_SZ_MAX,
.options = {
.udp_encap = 1,
.udp_ports_verify = 1,
@@ -658,7 +658,7 @@ cn10k_eth_sec_session_create(void *device,
}
inb_sa_dptr = (struct roc_ot_ipsec_inb_sa *)dev->inb.sa_dptr;
- memset(inb_sa_dptr, 0, sizeof(struct roc_ot_ipsec_inb_sa));
+ memset(inb_sa_dptr, 0, ROC_NIX_INL_OT_IPSEC_INB_HW_SZ);
/* Fill inbound sa params */
rc = cnxk_ot_ipsec_inb_sa_fill(inb_sa_dptr, ipsec, crypto,
@@ -701,7 +701,7 @@ cn10k_eth_sec_session_create(void *device,
/* Sync session in context cache */
rc = roc_nix_inl_ctx_write(&dev->nix, inb_sa_dptr, eth_sec->sa,
eth_sec->inb,
- sizeof(struct roc_ot_ipsec_inb_sa));
+ ROC_NIX_INL_OT_IPSEC_INB_HW_SZ);
if (rc)
goto mempool_put;
@@ -731,7 +731,7 @@ cn10k_eth_sec_session_create(void *device,
rlens = &outb_priv->rlens;
outb_sa_dptr = (struct roc_ot_ipsec_outb_sa *)dev->outb.sa_dptr;
- memset(outb_sa_dptr, 0, sizeof(struct roc_ot_ipsec_outb_sa));
+ memset(outb_sa_dptr, 0, ROC_NIX_INL_OT_IPSEC_OUTB_HW_SZ);
/* Fill outbound sa params */
rc = cnxk_ot_ipsec_outb_sa_fill(outb_sa_dptr, ipsec, crypto);
@@ -795,7 +795,7 @@ cn10k_eth_sec_session_create(void *device,
/* Sync session in context cache */
rc = roc_nix_inl_ctx_write(&dev->nix, outb_sa_dptr, eth_sec->sa,
eth_sec->inb,
- sizeof(struct roc_ot_ipsec_outb_sa));
+ ROC_NIX_INL_OT_IPSEC_OUTB_HW_SZ);
if (rc)
goto mempool_put;
}
@@ -846,21 +846,23 @@ cn10k_eth_sec_session_destroy(void *device, struct rte_security_session *sess)
if (eth_sec->inb) {
/* Disable SA */
sa_dptr = dev->inb.sa_dptr;
+ memset(sa_dptr, 0, ROC_NIX_INL_OT_IPSEC_INB_HW_SZ);
roc_ot_ipsec_inb_sa_init(sa_dptr, true);
roc_nix_inl_ctx_write(&dev->nix, sa_dptr, eth_sec->sa,
eth_sec->inb,
- sizeof(struct roc_ot_ipsec_inb_sa));
+ ROC_NIX_INL_OT_IPSEC_INB_HW_SZ);
TAILQ_REMOVE(&dev->inb.list, eth_sec, entry);
dev->inb.nb_sess--;
} else {
/* Disable SA */
sa_dptr = dev->outb.sa_dptr;
+ memset(sa_dptr, 0, ROC_NIX_INL_OT_IPSEC_OUTB_HW_SZ);
roc_ot_ipsec_outb_sa_init(sa_dptr);
roc_nix_inl_ctx_write(&dev->nix, sa_dptr, eth_sec->sa,
eth_sec->inb,
- sizeof(struct roc_ot_ipsec_outb_sa));
+ ROC_NIX_INL_OT_IPSEC_OUTB_HW_SZ);
/* Release Outbound SA index */
cnxk_eth_outb_sa_idx_put(dev, eth_sec->sa_idx);
TAILQ_REMOVE(&dev->outb.list, eth_sec, entry);
--
2.8.4
next prev parent reply other threads:[~2022-04-22 10:49 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-22 10:46 [PATCH v2 01/28] common/cnxk: add multi channel support for SDP send queues Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 02/28] net/cnxk: add receive channel backpressure for SDP Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 03/28] common/cnxk: add new pkind for CPT when ts is enabled Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 04/28] common/cnxk: support to configure the ts pkind in CPT Nithin Dabilpuram
2022-04-26 10:12 ` Ray Kinsella
2022-04-22 10:46 ` [PATCH v2 05/28] common/cnxk: fix SQ flush sequence Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 06/28] common/cnxk: skip probing SoC environment for CN9k Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 07/28] common/cnxk: fix issues in soft expiry disable path Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 08/28] common/cnxk: convert warning to debug print Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 09/28] common/cnxk: use aggregate level rr prio from mbox Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 10/28] net/cnxk: support loopback mode on AF VF's Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 11/28] net/cnxk: update LBK ethdev link info Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 12/28] net/cnxk: add barrier after meta batch free in scalar Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 13/28] net/cnxk: disable default inner chksum for outb inline Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 14/28] net/cnxk: fix roundup size with transport mode Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 15/28] net/cnxk: update inline device in ethdev telemetry Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 16/28] net/cnxk: change env for debug IV Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 17/28] net/cnxk: reset offload flag if reassembly is disabled Nithin Dabilpuram
2022-04-22 10:46 ` [PATCH v2 18/28] net/cnxk: support decrement TTL for inline IPsec Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 19/28] net/cnxk: optimize Rx fast path for security pkts Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 20/28] net/cnxk: update olflags with L3/L4 csum offload Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 21/28] net/cnxk: add capabilities for IPsec crypto algos Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 22/28] net/cnxk: add capabilities for IPsec options Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 23/28] net/cnxk: support security stats Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 24/28] net/cnxk: add support for flow control for outbound inline Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 25/28] net/cnxk: perform early MTU setup for eventmode Nithin Dabilpuram
2022-04-22 10:47 ` [PATCH v2 26/28] common/cnxk: allow lesser inline inbound sa sizes Nithin Dabilpuram
2022-04-22 10:47 ` Nithin Dabilpuram [this message]
2022-04-22 10:47 ` [PATCH v2 28/28] net/cnxk: fix multi-seg extraction in vwqe path Nithin Dabilpuram
2022-04-22 10:54 ` Pavan Nikhilesh Bhagavatula
2022-05-03 17:36 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220422104709.20722-27-ndabilpuram@marvell.com \
--to=ndabilpuram@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=skori@marvell.com \
--cc=skoteshwar@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).