From: Spike Du <spiked@nvidia.com>
To: <matan@nvidia.com>, <viacheslavo@nvidia.com>, <orika@nvidia.com>,
<thomas@monjalon.net>
Cc: <dev@dpdk.org>, <rasland@nvidia.com>
Subject: [RFC v1 3/7] ethdev: introduce Rx queue based limit watermark
Date: Fri, 6 May 2022 06:56:41 +0300 [thread overview]
Message-ID: <20220506035645.4101714-4-spiked@nvidia.com> (raw)
In-Reply-To: <20220506035645.4101714-1-spiked@nvidia.com>
LWM(limit watermark) is a per Rx queue attribute that notifies dpdk
application event of RTE_ETH_EVENT_RXQ_LIMIT_REACHED when the Rx
queue's usable descriptor is under the watermark.
To simplify its configuration, LWM is a percentage of Rx queue
descriptor size with valid value of [0,99].
Setting LWM to 0 means disable it.
Add LWM's configuration handle in eth_dev_ops.
Signed-off-by: Spike Du <spiked@nvidia.com>
---
lib/ethdev/ethdev_driver.h | 7 +++++++
lib/ethdev/rte_ethdev.c | 28 ++++++++++++++++++++++++++++
lib/ethdev/rte_ethdev.h | 30 +++++++++++++++++++++++++++++-
lib/ethdev/version.map | 3 +++
4 files changed, 67 insertions(+), 1 deletion(-)
diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
index 69d9dc2..1e9cdbf 100644
--- a/lib/ethdev/ethdev_driver.h
+++ b/lib/ethdev/ethdev_driver.h
@@ -470,6 +470,10 @@ typedef int (*eth_rx_queue_setup_t)(struct rte_eth_dev *dev,
const struct rte_eth_rxconf *rx_conf,
struct rte_mempool *mb_pool);
+typedef int (*eth_rx_queue_set_lwm_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint8_t lwm);
+
/** @internal Setup a transmit queue of an Ethernet device. */
typedef int (*eth_tx_queue_setup_t)(struct rte_eth_dev *dev,
uint16_t tx_queue_id,
@@ -1283,6 +1287,9 @@ struct eth_dev_ops {
/** Dump private info from device */
eth_dev_priv_dump_t eth_dev_priv_dump;
+
+ /** Set Rx queue limit watermark */
+ eth_rx_queue_set_lwm_t rx_queue_set_lwm;
};
/**
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index 29a3d80..1e4fc6a 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -4414,6 +4414,34 @@ int rte_eth_set_queue_rate_limit(uint16_t port_id, uint16_t queue_idx,
queue_idx, tx_rate));
}
+int rte_eth_rx_queue_set_lwm(uint16_t port_id, uint16_t queue_idx,
+ uint8_t lwm)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ ret = rte_eth_dev_info_get(port_id, &dev_info);
+ if (ret != 0)
+ return ret;
+
+ if (queue_idx > dev_info.max_rx_queues) {
+ RTE_ETHDEV_LOG(ERR,
+ "Set queue rate limit:port %u: invalid queue ID=%u\n",
+ port_id, queue_idx);
+ return -EINVAL;
+ }
+
+ if (lwm > 99)
+ return -EINVAL;
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_set_lwm, -ENOTSUP);
+ return eth_err(port_id, (*dev->dev_ops->rx_queue_set_lwm)(dev,
+ queue_idx, lwm));
+}
+
RTE_INIT(eth_dev_init_fp_ops)
{
uint32_t i;
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 04cff8e..f29e53b 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -1249,8 +1249,12 @@ struct rte_eth_rxconf {
*/
union rte_eth_rxseg *rx_seg;
- uint64_t reserved_64s[2]; /**< Reserved for future fields */
+ uint64_t reserved_64s;
+ uint32_t reserved_32s;
+ uint32_t lwm:8;
+ uint32_t reserved_bits:24;
void *reserved_ptrs[2]; /**< Reserved for future fields */
+
};
/**
@@ -3668,6 +3672,29 @@ int rte_eth_dev_set_vlan_ether_type(uint16_t port_id,
*/
int rte_eth_dev_set_vlan_pvid(uint16_t port_id, uint16_t pvid, int on);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Set Rx queue based limit watermark.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_idx
+ * The index of the receive queue
+ * @param lwm
+ * The limit watermark percentage of Rx queue descriptor size.
+ * The valid range is [0,99].
+ * Setting 0 means disable limit watermark.
+ *
+ * @return
+ * - (0) if successful.
+ * - negative if failed.
+ */
+__rte_experimental
+int rte_eth_rx_queue_set_lwm(uint16_t port_id, uint16_t queue_idx,
+ uint8_t lwm);
+
typedef void (*buffer_tx_error_fn)(struct rte_mbuf **unsent, uint16_t count,
void *userdata);
@@ -3873,6 +3900,7 @@ enum rte_eth_event_type {
RTE_ETH_EVENT_DESTROY, /**< port is released */
RTE_ETH_EVENT_IPSEC, /**< IPsec offload related event */
RTE_ETH_EVENT_FLOW_AGED,/**< New aged-out flows is detected */
+ RTE_ETH_EVENT_RXQ_LIMIT_REACHED,/**< RX queue limit reached */
RTE_ETH_EVENT_MAX /**< max value of this enum */
};
diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map
index 20391ab..8b85ad8 100644
--- a/lib/ethdev/version.map
+++ b/lib/ethdev/version.map
@@ -279,6 +279,9 @@ EXPERIMENTAL {
rte_flow_async_action_handle_create;
rte_flow_async_action_handle_destroy;
rte_flow_async_action_handle_update;
+
+ # added in 22.07
+ rte_eth_rx_queue_set_lwm;
};
INTERNAL {
--
1.8.3.1
next prev parent reply other threads:[~2022-05-06 3:57 UTC|newest]
Thread overview: 131+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-01 3:22 [RFC 0/6] net/mlx5: introduce limit watermark and host shaper Spike Du
2022-04-01 3:22 ` [RFC 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-05-06 3:56 ` [RFC v1 0/7] net/mlx5: introduce limit watermark and host shaper Spike Du
2022-05-06 3:56 ` [RFC v1 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-05-06 3:56 ` [RFC v1 2/7] common/mlx5: share interrupt management Spike Du
2022-05-06 3:56 ` Spike Du [this message]
2022-05-19 9:37 ` [RFC v1 3/7] ethdev: introduce Rx queue based limit watermark Andrew Rybchenko
2022-05-06 3:56 ` [RFC v1 4/7] net/mlx5: add LWM event handling support Spike Du
2022-05-06 3:56 ` [RFC v1 5/7] net/mlx5: support Rx queue based limit watermark Spike Du
2022-05-06 3:56 ` [RFC v1 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-05-06 3:56 ` [RFC v1 7/7] app/testpmd: add LWM and Host Shaper command Spike Du
2022-05-22 5:58 ` [RFC v2 0/7] introduce per-queue limit watermark and host shaper Spike Du
2022-05-22 5:58 ` [RFC v2 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-05-22 5:58 ` [RFC v2 2/7] common/mlx5: share interrupt management Spike Du
2022-05-22 5:58 ` [RFC v2 3/7] ethdev: introduce Rx queue based limit watermark Spike Du
2022-05-22 15:23 ` Stephen Hemminger
2022-05-23 3:01 ` Spike Du
2022-05-23 21:45 ` Thomas Monjalon
2022-05-24 2:50 ` Spike Du
2022-05-24 8:18 ` Thomas Monjalon
2022-05-25 12:59 ` Andrew Rybchenko
2022-05-25 13:58 ` Thomas Monjalon
2022-05-25 14:23 ` Andrew Rybchenko
2022-05-23 22:54 ` Stephen Hemminger
2022-05-24 3:46 ` Spike Du
2022-05-22 15:24 ` Stephen Hemminger
2022-05-23 2:18 ` Spike Du
2022-05-23 6:07 ` Morten Brørup
2022-05-23 10:58 ` Thomas Monjalon
2022-05-23 14:10 ` Spike Du
2022-05-23 14:39 ` Thomas Monjalon
2022-05-24 6:35 ` Andrew Rybchenko
2022-05-24 9:40 ` Morten Brørup
2022-05-22 5:58 ` [RFC v2 4/7] net/mlx5: add LWM event handling support Spike Du
2022-05-22 5:58 ` [RFC v2 5/7] net/mlx5: support Rx queue based limit watermark Spike Du
2022-05-22 5:58 ` [RFC v2 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-05-22 5:59 ` [RFC v2 7/7] app/testpmd: add LWM and Host Shaper command Spike Du
2022-05-24 15:20 ` [PATCH v3 0/7] introduce per-queue limit watermark and host shaper Spike Du
2022-05-24 15:20 ` [PATCH v3 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-05-24 15:20 ` [PATCH v3 2/7] common/mlx5: share interrupt management Spike Du
2022-05-24 15:20 ` [PATCH v3 3/7] ethdev: introduce Rx queue based limit watermark Spike Du
2022-05-24 15:20 ` [PATCH v3 4/7] net/mlx5: add LWM event handling support Spike Du
2022-05-24 15:20 ` [PATCH v3 5/7] net/mlx5: support Rx queue based limit watermark Spike Du
2022-05-24 15:20 ` [PATCH v3 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-05-24 15:20 ` [PATCH v3 7/7] app/testpmd: add LWM and Host Shaper command Spike Du
2022-05-24 15:59 ` [PATCH v3 0/7] introduce per-queue limit watermark and host shaper Thomas Monjalon
2022-05-24 19:00 ` Morten Brørup
2022-05-24 19:22 ` Thomas Monjalon
2022-05-25 14:11 ` Andrew Rybchenko
2022-05-25 13:14 ` Spike Du
2022-05-25 13:40 ` Morten Brørup
2022-05-25 13:59 ` Spike Du
2022-05-25 14:16 ` Morten Brørup
2022-05-25 14:30 ` Andrew Rybchenko
2022-06-03 12:48 ` [PATCH v4 0/7] introduce per-queue fill threshold " Spike Du
2022-06-03 12:48 ` [PATCH v4 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-06-03 12:48 ` [PATCH v4 2/7] common/mlx5: share interrupt management Spike Du
2022-06-03 14:30 ` Ray Kinsella
2022-06-03 12:48 ` [PATCH v4 3/7] ethdev: introduce Rx queue based fill threshold Spike Du
2022-06-03 14:30 ` Ray Kinsella
2022-06-04 12:46 ` Andrew Rybchenko
2022-06-06 13:16 ` Spike Du
2022-06-06 17:15 ` Andrew Rybchenko
2022-06-06 21:30 ` Thomas Monjalon
2022-06-07 8:02 ` Andrew Rybchenko
2022-06-07 6:00 ` Spike Du
2022-06-06 15:49 ` Stephen Hemminger
2022-06-03 12:48 ` [PATCH v4 4/7] net/mlx5: add LWM event handling support Spike Du
2022-06-03 12:48 ` [PATCH v4 5/7] net/mlx5: support Rx queue based fill threshold Spike Du
2022-06-03 12:48 ` [PATCH v4 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-06-03 14:55 ` Ray Kinsella
2022-06-03 12:48 ` [PATCH v4 7/7] app/testpmd: add Host Shaper command Spike Du
2022-06-07 12:59 ` [PATCH v5 0/7] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-07 12:59 ` [PATCH v5 1/7] net/mlx5: add LWM support for Rxq Spike Du
2022-06-08 20:10 ` Matan Azrad
2022-06-07 12:59 ` [PATCH v5 2/7] common/mlx5: share interrupt management Spike Du
2022-06-07 12:59 ` [PATCH v5 3/7] ethdev: introduce Rx queue based available descriptor threshold Spike Du
2022-06-07 12:59 ` [PATCH v5 4/7] net/mlx5: add LWM event handling support Spike Du
2022-06-07 12:59 ` [PATCH v5 5/7] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-07 12:59 ` [PATCH v5 6/7] net/mlx5: add private API to config host port shaper Spike Du
2022-06-07 12:59 ` [PATCH v5 7/7] app/testpmd: add Host Shaper command Spike Du
2022-06-09 7:55 ` Andrew Rybchenko
2022-06-10 2:22 ` Spike Du
2022-06-13 2:50 ` [PATCH v6] " Spike Du
2022-06-13 2:50 ` Spike Du
2022-06-14 9:43 ` Singh, Aman Deep
2022-06-14 9:54 ` Spike Du
2022-06-14 12:01 ` [PATCH v7] " Spike Du
2022-06-14 12:01 ` Spike Du
2022-06-15 7:51 ` Matan Azrad
2022-06-15 11:08 ` Thomas Monjalon
2022-06-15 12:58 ` [PATCH v8 0/6] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-15 12:58 ` [PATCH v8 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-06-15 14:43 ` [PATCH v9 0/6] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-15 14:43 ` [PATCH v9 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-06-16 8:41 ` [PATCH v10 0/6] introduce per-queue available descriptor threshold and host shaper Spike Du
2022-06-16 8:41 ` [PATCH v10 1/6] net/mlx5: add LWM support for Rxq Spike Du
2022-06-16 8:41 ` [PATCH v10 2/6] common/mlx5: share interrupt management Spike Du
2022-06-23 16:05 ` Ray Kinsella
2022-06-16 8:41 ` [PATCH v10 3/6] net/mlx5: add LWM event handling support Spike Du
2022-06-16 8:41 ` [PATCH v10 4/6] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-16 8:41 ` [PATCH v10 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-06-16 8:41 ` [PATCH v10 6/6] app/testpmd: add Host Shaper command Spike Du
2022-06-19 8:14 ` [PATCH v10 0/6] introduce per-queue available descriptor threshold and host shaper Raslan Darawsheh
2022-06-15 14:43 ` [PATCH v9 2/6] common/mlx5: share interrupt management Spike Du
2022-06-15 14:43 ` [PATCH v9 3/6] net/mlx5: add LWM event handling support Spike Du
2022-06-15 14:43 ` [PATCH v9 4/6] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-15 14:43 ` [PATCH v9 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-06-15 14:43 ` [PATCH v9 6/6] app/testpmd: add Host Shaper command Spike Du
2022-06-15 12:58 ` [PATCH v8 2/6] common/mlx5: share interrupt management Spike Du
2022-06-15 12:58 ` [PATCH v8 3/6] net/mlx5: add LWM event handling support Spike Du
2022-06-15 12:58 ` [PATCH v8 4/6] net/mlx5: support Rx queue based available descriptor threshold Spike Du
2022-06-15 12:58 ` [PATCH v8 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-06-15 12:58 ` [PATCH v8 6/6] app/testpmd: add Host Shaper command Spike Du
2022-06-08 9:43 ` [PATCH v5 0/7] introduce per-queue available descriptor threshold and host shaper Andrew Rybchenko
2022-06-08 16:35 ` [PATCH v6] ethdev: introduce available Rx descriptors threshold Andrew Rybchenko
2022-06-08 17:22 ` Thomas Monjalon
2022-06-08 17:46 ` Thomas Monjalon
2022-06-09 0:17 ` fengchengwen
2022-06-09 7:05 ` Thomas Monjalon
2022-06-10 0:01 ` fengchengwen
2022-04-01 3:22 ` [RFC 2/6] common/mlx5: share interrupt management Spike Du
2022-04-01 3:22 ` [RFC 3/6] net/mlx5: add LWM event handling support Spike Du
2022-04-01 3:22 ` [RFC 4/6] net/mlx5: add private API to configure Rxq LWM Spike Du
2022-04-01 3:22 ` [RFC 5/6] net/mlx5: add private API to config host port shaper Spike Du
2022-04-01 3:22 ` [RFC 6/6] app/testpmd: add LWM and Host Shaper command Spike Du
2022-04-05 8:58 ` [RFC 0/6] net/mlx5: introduce limit watermark and host shaper Jerin Jacob
2022-04-26 2:42 ` Spike Du
2022-05-01 12:50 ` Jerin Jacob
2022-05-02 3:58 ` Spike Du
2022-04-29 5:48 ` Spike Du
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220506035645.4101714-4-spiked@nvidia.com \
--to=spiked@nvidia.com \
--cc=dev@dpdk.org \
--cc=matan@nvidia.com \
--cc=orika@nvidia.com \
--cc=rasland@nvidia.com \
--cc=thomas@monjalon.net \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).