From: Robin Zhang <robinx.zhang@intel.com>
To: dev@dpdk.org
Cc: Thomas Monjalon <thomas@monjalon.net>,
Ferruh Yigit <ferruh.yigit@xilinx.com>,
Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
Robin Zhang <robinx.zhang@intel.com>
Subject: [PATCH v6 3/5] ethdev: format module EEPROM for SFF-8079
Date: Wed, 11 May 2022 02:14:40 +0000 [thread overview]
Message-ID: <20220511021442.811950-4-robinx.zhang@intel.com> (raw)
In-Reply-To: <20220511021442.811950-1-robinx.zhang@intel.com>
This patch implements format module EEPROM information for
SFF-8079 Rev 1.7
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
---
lib/ethdev/ethdev_sff_telemetry.c | 3 +
lib/ethdev/meson.build | 1 +
lib/ethdev/sff_8079.c | 406 ++++++++++++++++++++++++++++++
3 files changed, 410 insertions(+)
create mode 100644 lib/ethdev/sff_8079.c
diff --git a/lib/ethdev/ethdev_sff_telemetry.c b/lib/ethdev/ethdev_sff_telemetry.c
index f756b9643f..63b0d21786 100644
--- a/lib/ethdev/ethdev_sff_telemetry.c
+++ b/lib/ethdev/ethdev_sff_telemetry.c
@@ -70,6 +70,9 @@ sff_port_module_eeprom_parse(uint16_t port_id, struct rte_tel_data *d)
switch (minfo.type) {
/* parsing module EEPROM data base on different module type */
+ case RTE_ETH_MODULE_SFF_8079:
+ sff_8079_show_all(einfo.data, d);
+ break;
default:
RTE_ETHDEV_LOG(NOTICE, "Unsupported module type: %u\n", minfo.type);
break;
diff --git a/lib/ethdev/meson.build b/lib/ethdev/meson.build
index 8f39739e43..d94860da0c 100644
--- a/lib/ethdev/meson.build
+++ b/lib/ethdev/meson.build
@@ -13,6 +13,7 @@ sources = files(
'rte_tm.c',
'ethdev_sff_telemetry.c',
'sff_common.c',
+ 'sff_8079.c',
)
headers = files(
diff --git a/lib/ethdev/sff_8079.c b/lib/ethdev/sff_8079.c
new file mode 100644
index 0000000000..cfa20bd3cb
--- /dev/null
+++ b/lib/ethdev/sff_8079.c
@@ -0,0 +1,406 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Intel Corporation
+ *
+ * Implements SFF-8079 optics diagnostics.
+ *
+ */
+
+#include <stdio.h>
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_flow.h>
+#include "sff_common.h"
+#include "ethdev_sff_telemetry.h"
+
+static void sff_8079_show_identifier(const uint8_t *data, struct rte_tel_data *d)
+{
+ sff_8024_show_identifier(data, 0, d);
+}
+
+static void sff_8079_show_ext_identifier(const uint8_t *data, struct rte_tel_data *d)
+{
+ char val_string[SFF_ITEM_VAL_COMPOSE_SIZE];
+
+ snprintf(val_string, sizeof(val_string), "0x%02x", data[1]);
+ if (data[1] == 0x00)
+ strlcat(val_string, " (GBIC not specified / not MOD_DEF compliant)",
+ sizeof(val_string));
+ else if (data[1] == 0x04)
+ strlcat(val_string, " (GBIC/SFP defined by 2-wire interface ID)",
+ sizeof(val_string));
+ else if (data[1] <= 0x07) {
+ char tmp[SFF_ITEM_VAL_COMPOSE_SIZE];
+ snprintf(tmp, sizeof(tmp), " (GBIC compliant with MOD_DEF %u)", data[1]);
+ strlcat(val_string, tmp, sizeof(val_string));
+ } else
+ strlcat(val_string, " (unknown)", sizeof(val_string));
+ ssf_add_dict_string(d, "Extended identifier", val_string);
+}
+
+static void sff_8079_show_connector(const uint8_t *data, struct rte_tel_data *d)
+{
+ sff_8024_show_connector(data, 2, d);
+}
+
+static void sff_8079_show_transceiver(const uint8_t *data, struct rte_tel_data *d)
+{
+ static const char *name = "Transceiver type";
+ char val_string[SFF_ITEM_VAL_COMPOSE_SIZE];
+
+ snprintf(val_string, sizeof(val_string),
+ "0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x",
+ data[3], data[4], data[5], data[6], data[7], data[8], data[9], data[10], data[36]);
+ ssf_add_dict_string(d, "Transceiver codes", val_string);
+
+ /* 10G Ethernet Compliance Codes */
+ if (data[3] & (1 << 7))
+ ssf_add_dict_string(d, "10G Ethernet transceiver type",
+ "10G Ethernet: 10G Base-ER [SFF-8472 rev10.4 onwards]");
+ if (data[3] & (1 << 6))
+ ssf_add_dict_string(d, name, "10G Ethernet: 10G Base-LRM");
+ if (data[3] & (1 << 5))
+ ssf_add_dict_string(d, name, "10G Ethernet: 10G Base-LR");
+ if (data[3] & (1 << 4))
+ ssf_add_dict_string(d, name, "10G Ethernet: 10G Base-SR");
+
+ /* Infiniband Compliance Codes */
+ if (data[3] & (1 << 3))
+ ssf_add_dict_string(d, name, "Infiniband: 1X SX");
+ if (data[3] & (1 << 2))
+ ssf_add_dict_string(d, name, "Infiniband: 1X LX");
+ if (data[3] & (1 << 1))
+ ssf_add_dict_string(d, name, "Infiniband: 1X Copper Active");
+ if (data[3] & (1 << 0))
+ ssf_add_dict_string(d, name, "Infiniband: 1X Copper Passive");
+
+ /* ESCON Compliance Codes */
+ if (data[4] & (1 << 7))
+ ssf_add_dict_string(d, name, "ESCON: ESCON MMF, 1310nm LED");
+ if (data[4] & (1 << 6))
+ ssf_add_dict_string(d, name, "ESCON: ESCON SMF, 1310nm Laser");
+
+ /* SONET Compliance Codes */
+ if (data[4] & (1 << 5))
+ ssf_add_dict_string(d, name, "SONET: OC-192, short reach");
+ if (data[4] & (1 << 4))
+ ssf_add_dict_string(d, name, "SONET: SONET reach specifier bit 1");
+ if (data[4] & (1 << 3))
+ ssf_add_dict_string(d, name, "SONET: SONET reach specifier bit 2");
+ if (data[4] & (1 << 2))
+ ssf_add_dict_string(d, name, "SONET: OC-48, long reach");
+ if (data[4] & (1 << 1))
+ ssf_add_dict_string(d, name, "SONET: OC-48, intermediate reach");
+ if (data[4] & (1 << 0))
+ ssf_add_dict_string(d, name, "SONET: OC-48, short reach");
+ if (data[5] & (1 << 6))
+ ssf_add_dict_string(d, name, "SONET: OC-12, single mode, long reach");
+ if (data[5] & (1 << 5))
+ ssf_add_dict_string(d, name, "SONET: OC-12, single mode, inter. reach");
+ if (data[5] & (1 << 4))
+ ssf_add_dict_string(d, name, "SONET: OC-12, short reach");
+ if (data[5] & (1 << 2))
+ ssf_add_dict_string(d, name, "SONET: OC-3, single mode, long reach");
+ if (data[5] & (1 << 1))
+ ssf_add_dict_string(d, name, "SONET: OC-3, single mode, inter. reach");
+ if (data[5] & (1 << 0))
+ ssf_add_dict_string(d, name, "SONET: OC-3, short reach");
+
+ /* Ethernet Compliance Codes */
+ if (data[6] & (1 << 7))
+ ssf_add_dict_string(d, name, "Ethernet: BASE-PX");
+ if (data[6] & (1 << 6))
+ ssf_add_dict_string(d, name, "Ethernet: BASE-BX10");
+ if (data[6] & (1 << 5))
+ ssf_add_dict_string(d, name, "Ethernet: 100BASE-FX");
+ if (data[6] & (1 << 4))
+ ssf_add_dict_string(d, name, "Ethernet: 100BASE-LX/LX10");
+ if (data[6] & (1 << 3))
+ ssf_add_dict_string(d, name, "Ethernet: 1000BASE-T");
+ if (data[6] & (1 << 2))
+ ssf_add_dict_string(d, name, "Ethernet: 1000BASE-CX");
+ if (data[6] & (1 << 1))
+ ssf_add_dict_string(d, name, "Ethernet: 1000BASE-LX");
+ if (data[6] & (1 << 0))
+ ssf_add_dict_string(d, name, "Ethernet: 1000BASE-SX");
+
+ /* Fibre Channel link length */
+ if (data[7] & (1 << 7))
+ ssf_add_dict_string(d, name, "FC: very long distance (V)");
+ if (data[7] & (1 << 6))
+ ssf_add_dict_string(d, name, "FC: short distance (S)");
+ if (data[7] & (1 << 5))
+ ssf_add_dict_string(d, name, "FC: intermediate distance (I)");
+ if (data[7] & (1 << 4))
+ ssf_add_dict_string(d, name, "FC: long distance (L)");
+ if (data[7] & (1 << 3))
+ ssf_add_dict_string(d, name, "FC: medium distance (M)");
+
+ /* Fibre Channel transmitter technology */
+ if (data[7] & (1 << 2))
+ ssf_add_dict_string(d, name, "FC: Shortwave laser, linear Rx (SA)");
+ if (data[7] & (1 << 1))
+ ssf_add_dict_string(d, name, "FC: Longwave laser (LC)");
+ if (data[7] & (1 << 0))
+ ssf_add_dict_string(d, name, "FC: Electrical inter-enclosure (EL)");
+ if (data[8] & (1 << 7))
+ ssf_add_dict_string(d, name, "FC: Electrical intra-enclosure (EL)");
+ if (data[8] & (1 << 6))
+ ssf_add_dict_string(d, name, "FC: Shortwave laser w/o OFC (SN)");
+ if (data[8] & (1 << 5))
+ ssf_add_dict_string(d, name, "FC: Shortwave laser with OFC (SL)");
+ if (data[8] & (1 << 4))
+ ssf_add_dict_string(d, name, "FC: Longwave laser (LL)");
+ if (data[8] & (1 << 3))
+ ssf_add_dict_string(d, name, "Active Cable");
+ if (data[8] & (1 << 2))
+ ssf_add_dict_string(d, name, "Passive Cable");
+ if (data[8] & (1 << 1))
+ ssf_add_dict_string(d, name, "FC: Copper FC-BaseT");
+
+ /* Fibre Channel transmission media */
+ if (data[9] & (1 << 7))
+ ssf_add_dict_string(d, name, "FC: Twin Axial Pair (TW)");
+ if (data[9] & (1 << 6))
+ ssf_add_dict_string(d, name, "FC: Twisted Pair (TP)");
+ if (data[9] & (1 << 5))
+ ssf_add_dict_string(d, name, "FC: Miniature Coax (MI)");
+ if (data[9] & (1 << 4))
+ ssf_add_dict_string(d, name, "FC: Video Coax (TV)");
+ if (data[9] & (1 << 3))
+ ssf_add_dict_string(d, name, "FC: Multimode, 62.5um (M6)");
+ if (data[9] & (1 << 2))
+ ssf_add_dict_string(d, name, "FC: Multimode, 50um (M5)");
+ if (data[9] & (1 << 0))
+ ssf_add_dict_string(d, name, "FC: Single Mode (SM)");
+
+ /* Fibre Channel speed */
+ if (data[10] & (1 << 7))
+ ssf_add_dict_string(d, name, "FC: 1200 MBytes/sec");
+ if (data[10] & (1 << 6))
+ ssf_add_dict_string(d, name, "FC: 800 MBytes/sec");
+ if (data[10] & (1 << 4))
+ ssf_add_dict_string(d, name, "FC: 400 MBytes/sec");
+ if (data[10] & (1 << 2))
+ ssf_add_dict_string(d, name, "FC: 200 MBytes/sec");
+ if (data[10] & (1 << 0))
+ ssf_add_dict_string(d, name, "FC: 100 MBytes/sec");
+
+ /* Extended Specification Compliance Codes from SFF-8024 */
+ switch (data[36]) {
+ case 0x1:
+ ssf_add_dict_string(d, name,
+ "Extended: 100G AOC or 25GAUI C2M AOC with worst BER of 5x10^(-5)");
+ break;
+ case 0x2:
+ ssf_add_dict_string(d, name, "Extended: 100G Base-SR4 or 25GBase-SR");
+ break;
+ case 0x3:
+ ssf_add_dict_string(d, name, "Extended: 100G Base-LR4 or 25GBase-LR");
+ break;
+ case 0x4:
+ ssf_add_dict_string(d, name, "Extended: 100G Base-ER4 or 25GBase-ER");
+ break;
+ case 0x8:
+ ssf_add_dict_string(d, name,
+ "Extended: 100G ACC or 25GAUI C2M ACC with worst BER of 5x10^(-5)");
+ break;
+ case 0xb:
+ ssf_add_dict_string(d, name, "Extended: 100G Base-CR4 or 25G Base-CR CA-L");
+ break;
+ case 0xc:
+ ssf_add_dict_string(d, name, "Extended: 25G Base-CR CA-S");
+ break;
+ case 0xd:
+ ssf_add_dict_string(d, name, "Extended: 25G Base-CR CA-N");
+ break;
+ case 0x16:
+ ssf_add_dict_string(d, name, "Extended: 10Gbase-T with SFI electrical interface");
+ break;
+ case 0x18:
+ ssf_add_dict_string(d, name,
+ "Extended: 100G AOC or 25GAUI C2M AOC with worst BER of 10^(-12)");
+ break;
+ case 0x19:
+ ssf_add_dict_string(d, name,
+ "Extended: 100G ACC or 25GAUI C2M ACC with worst BER of 10^(-12)");
+ break;
+ case 0x1c:
+ ssf_add_dict_string(d, name, "Extended: 10Gbase-T Short Reach");
+ break;
+ default:
+ break;
+ }
+}
+
+static void sff_8079_show_encoding(const uint8_t *data, struct rte_tel_data *d)
+{
+ sff_8024_show_encoding(data, 11, RTE_ETH_MODULE_SFF_8472, d);
+}
+
+static void sff_8079_show_rate_identifier(const uint8_t *data, struct rte_tel_data *d)
+{
+ char val_string[SFF_ITEM_VAL_COMPOSE_SIZE];
+
+ snprintf(val_string, sizeof(val_string), "0x%02x", data[13]);
+
+ switch (data[13]) {
+ case 0x00:
+ strlcat(val_string, " (unspecified)", sizeof(val_string));
+ break;
+ case 0x01:
+ strlcat(val_string, " (4/2/1G Rate_Select & AS0/AS1)", sizeof(val_string));
+ break;
+ case 0x02:
+ strlcat(val_string, " (8/4/2G Rx Rate_Select only)", sizeof(val_string));
+ break;
+ case 0x03:
+ strlcat(val_string, " (8/4/2G Independent Rx & Tx Rate_Select)",
+ sizeof(val_string));
+ break;
+ case 0x04:
+ strlcat(val_string, " (8/4/2G Tx Rate_Select only)", sizeof(val_string));
+ break;
+ default:
+ strlcat(val_string, " (reserved or unknown)", sizeof(val_string));
+ break;
+ }
+ ssf_add_dict_string(d, "Rate identifier", val_string);
+}
+
+static void sff_8079_show_oui(const uint8_t *data, struct rte_tel_data *d)
+{
+ sff_8024_show_oui(data, 37, d);
+}
+
+static void
+sff_8079_show_wavelength_or_copper_compliance(const uint8_t *data,
+ struct rte_tel_data *d)
+{
+ char val_string[SFF_ITEM_VAL_COMPOSE_SIZE];
+
+ if (data[8] & (1 << 2)) {
+ snprintf(val_string, sizeof(val_string), "0x%02x", data[60]);
+ switch (data[60]) {
+ case 0x00:
+ strlcat(val_string, " (unspecified)", sizeof(val_string));
+ break;
+ case 0x01:
+ strlcat(val_string, " (SFF-8431 appendix E)", sizeof(val_string));
+ break;
+ default:
+ strlcat(val_string, " (unknown)", sizeof(val_string));
+ break;
+ }
+ strlcat(val_string, " [SFF-8472 rev10.4 only]", sizeof(val_string));
+ ssf_add_dict_string(d, "Passive Cu cmplnce.", val_string);
+ } else if (data[8] & (1 << 3)) {
+ snprintf(val_string, sizeof(val_string), "0x%02x", data[60]);
+ switch (data[60]) {
+ case 0x00:
+ strlcat(val_string, " (unspecified)", sizeof(val_string));
+ break;
+ case 0x01:
+ strlcat(val_string, " (SFF-8431 appendix E)", sizeof(val_string));
+ break;
+ case 0x04:
+ strlcat(val_string, " (SFF-8431 limiting)", sizeof(val_string));
+ break;
+ default:
+ strlcat(val_string, " (unknown)", sizeof(val_string));
+ break;
+ }
+ strlcat(val_string, " [SFF-8472 rev10.4 only]", sizeof(val_string));
+ ssf_add_dict_string(d, "Active Cu cmplnce.", val_string);
+ } else {
+ snprintf(val_string, sizeof(val_string), "%unm", (data[60] << 8) | data[61]);
+ ssf_add_dict_string(d, "Laser wavelength", val_string);
+ }
+}
+
+static void sff_8079_show_options(const uint8_t *data, struct rte_tel_data *d)
+{
+ static const char *name = "Option";
+ char val_string[SFF_ITEM_VAL_COMPOSE_SIZE];
+
+ snprintf(val_string, sizeof(val_string), "0x%02x 0x%02x", data[64], data[65]);
+ ssf_add_dict_string(d, "Option values", val_string);
+
+ if (data[65] & (1 << 1))
+ ssf_add_dict_string(d, name, "RX_LOS implemented");
+ if (data[65] & (1 << 2))
+ ssf_add_dict_string(d, name, "RX_LOS implemented, inverted");
+ if (data[65] & (1 << 3))
+ ssf_add_dict_string(d, name, "TX_FAULT implemented");
+ if (data[65] & (1 << 4))
+ ssf_add_dict_string(d, name, "TX_DISABLE implemented");
+ if (data[65] & (1 << 5))
+ ssf_add_dict_string(d, name, "RATE_SELECT implemented");
+ if (data[65] & (1 << 6))
+ ssf_add_dict_string(d, name, "Tunable transmitter technology");
+ if (data[65] & (1 << 7))
+ ssf_add_dict_string(d, name, "Receiver decision threshold implemented");
+ if (data[64] & (1 << 0))
+ ssf_add_dict_string(d, name, "Linear receiver output implemented");
+ if (data[64] & (1 << 1))
+ ssf_add_dict_string(d, name, "Power level 2 requirement");
+ if (data[64] & (1 << 2))
+ ssf_add_dict_string(d, name, "Cooled transceiver implemented");
+ if (data[64] & (1 << 3))
+ ssf_add_dict_string(d, name, "Retimer or CDR implemented");
+ if (data[64] & (1 << 4))
+ ssf_add_dict_string(d, name, "Paging implemented");
+ if (data[64] & (1 << 5))
+ ssf_add_dict_string(d, name, "Power level 3 requirement");
+}
+
+void sff_8079_show_all(const uint8_t *data, struct rte_tel_data *d)
+{
+ sff_8079_show_identifier(data, d);
+ if (((data[0] == 0x02) || (data[0] == 0x03)) && (data[1] == 0x04)) {
+ unsigned int br_nom, br_min, br_max;
+ char val_string[SFF_ITEM_VAL_COMPOSE_SIZE];
+
+ if (data[12] == 0) {
+ br_nom = br_min = br_max = 0;
+ } else if (data[12] == 255) {
+ br_nom = data[66] * 250;
+ br_max = data[67];
+ br_min = data[67];
+ } else {
+ br_nom = data[12] * 100;
+ br_max = data[66];
+ br_min = data[67];
+ }
+ sff_8079_show_ext_identifier(data, d);
+ sff_8079_show_connector(data, d);
+ sff_8079_show_transceiver(data, d);
+ sff_8079_show_encoding(data, d);
+
+ snprintf(val_string, sizeof(val_string), "%uMBd", br_nom);
+ ssf_add_dict_string(d, "BR, Nominal", val_string);
+
+ sff_8079_show_rate_identifier(data, d);
+ sff_show_value_with_unit(data, 14,
+ "Length (SMF,km)", 1, "km", d);
+ sff_show_value_with_unit(data, 15, "Length (SMF)", 100, "m", d);
+ sff_show_value_with_unit(data, 16, "Length (50um)", 10, "m", d);
+ sff_show_value_with_unit(data, 17,
+ "Length (62.5um)", 10, "m", d);
+ sff_show_value_with_unit(data, 18, "Length (Copper)", 1, "m", d);
+ sff_show_value_with_unit(data, 19, "Length (OM3)", 10, "m", d);
+ sff_8079_show_wavelength_or_copper_compliance(data, d);
+ sff_show_ascii(data, 20, 35, "Vendor name", d);
+ sff_8079_show_oui(data, d);
+ sff_show_ascii(data, 40, 55, "Vendor PN", d);
+ sff_show_ascii(data, 56, 59, "Vendor rev", d);
+ sff_8079_show_options(data, d);
+
+ snprintf(val_string, sizeof(val_string), "%u%%", br_max);
+ ssf_add_dict_string(d, "BR margin, max", val_string);
+ snprintf(val_string, sizeof(val_string), "%u%%", br_min);
+ ssf_add_dict_string(d, "BR margin, min", val_string);
+
+ sff_show_ascii(data, 68, 83, "Vendor SN", d);
+ sff_show_ascii(data, 84, 91, "Date code", d);
+ }
+}
--
2.25.1
next prev parent reply other threads:[~2022-05-11 2:20 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-15 10:18 [PATCH] app/testpmd: format dump information of module EEPROM Robin Zhang
2022-02-15 13:28 ` Ferruh Yigit
2022-02-15 15:07 ` Thomas Monjalon
2022-02-16 2:26 ` Zhang, RobinX
2022-02-16 8:03 ` David Marchand
2022-02-16 8:45 ` Thomas Monjalon
2022-02-16 9:30 ` Bruce Richardson
2022-02-16 9:41 ` David Marchand
2022-02-16 10:02 ` Bruce Richardson
2022-02-16 10:15 ` David Marchand
2022-04-08 10:23 ` [PATCH v2] common/sff_module: add telemetry command to dump " Robin Zhang
2022-04-08 10:33 ` Bruce Richardson
2022-04-08 10:55 ` Zhang, RobinX
2022-04-08 11:00 ` Bruce Richardson
2022-04-08 11:20 ` Zhang, RobinX
2022-04-08 11:26 ` Bruce Richardson
2022-04-11 8:13 ` Zhang, RobinX
2022-04-11 9:13 ` Bruce Richardson
2022-04-13 12:13 ` Thomas Monjalon
2022-04-14 7:41 ` David Marchand
2022-04-20 7:00 ` [PATCH v3 0/5] add telemetry command for show " Robin Zhang
2022-04-20 7:00 ` [PATCH v3 1/5] ethdev: add telemetry command for " Robin Zhang
2022-04-20 9:16 ` Andrew Rybchenko
2022-04-20 7:00 ` [PATCH v3 2/5] ethdev: common utilities for different SFF specs Robin Zhang
2022-04-20 7:00 ` [PATCH v3 3/5] ethdev: format module EEPROM for SFF-8079 Robin Zhang
2022-04-20 7:00 ` [PATCH v3 4/5] ethdev: format module EEPROM for SFF-8472 Robin Zhang
2022-04-20 7:00 ` [PATCH v3 5/5] ethdev: format module EEPROM for SFF-8636 Robin Zhang
2022-04-20 8:49 ` [PATCH v3 0/5] add telemetry command for show module EEPROM Morten Brørup
2022-04-25 5:34 ` [PATCH v4 " Robin Zhang
2022-04-25 5:34 ` [PATCH v4 1/5] ethdev: add telemetry command for " Robin Zhang
2022-04-25 5:34 ` [PATCH v4 2/5] ethdev: common utilities for different SFF specs Robin Zhang
2022-04-25 5:34 ` [PATCH v4 3/5] ethdev: format module EEPROM for SFF-8079 Robin Zhang
2022-04-25 5:34 ` [PATCH v4 4/5] ethdev: format module EEPROM for SFF-8472 Robin Zhang
2022-04-25 5:34 ` [PATCH v4 5/5] ethdev: format module EEPROM for SFF-8636 Robin Zhang
2022-04-26 2:43 ` [PATCH v5 0/5] add telemetry command for show module EEPROM Robin Zhang
2022-04-26 2:43 ` [PATCH v5 1/5] ethdev: add telemetry command for " Robin Zhang
2022-05-04 10:16 ` Andrew Rybchenko
2022-04-26 2:43 ` [PATCH v5 2/5] ethdev: common utilities for different SFF specs Robin Zhang
2022-04-26 2:43 ` [PATCH v5 3/5] ethdev: format module EEPROM for SFF-8079 Robin Zhang
2022-04-26 2:43 ` [PATCH v5 4/5] ethdev: format module EEPROM for SFF-8472 Robin Zhang
2022-04-26 2:43 ` [PATCH v5 5/5] ethdev: format module EEPROM for SFF-8636 Robin Zhang
2022-05-04 8:13 ` [PATCH v5 0/5] add telemetry command for show module EEPROM Andrew Rybchenko
2022-05-11 2:14 ` [PATCH v6 " Robin Zhang
2022-05-11 2:14 ` [PATCH v6 1/5] ethdev: add telemetry command for " Robin Zhang
2022-05-11 2:14 ` [PATCH v6 2/5] ethdev: common utilities for different SFF specs Robin Zhang
2022-05-11 2:14 ` Robin Zhang [this message]
2022-05-11 2:14 ` [PATCH v6 4/5] ethdev: format module EEPROM for SFF-8472 Robin Zhang
2022-05-19 8:33 ` Andrew Rybchenko
2022-05-11 2:14 ` [PATCH v6 5/5] ethdev: format module EEPROM for SFF-8636 Robin Zhang
2022-05-24 6:24 ` [PATCH v7 0/5] add telemetry command for show module EEPROM Robin Zhang
2022-05-24 6:24 ` [PATCH v7 1/5] ethdev: add telemetry command for " Robin Zhang
2022-05-24 6:24 ` [PATCH v7 2/5] ethdev: common utilities for different SFF specs Robin Zhang
2022-05-24 6:24 ` [PATCH v7 3/5] ethdev: format module EEPROM for SFF-8079 Robin Zhang
2022-05-24 6:24 ` [PATCH v7 4/5] ethdev: format module EEPROM for SFF-8472 Robin Zhang
2022-05-24 6:24 ` [PATCH v7 5/5] ethdev: format module EEPROM for SFF-8636 Robin Zhang
2022-05-24 9:03 ` David Marchand
2022-05-25 2:43 ` Zhang, RobinX
2022-05-25 3:14 ` [PATCH v8 0/5] add telemetry command for show module EEPROM Robin Zhang
2022-05-25 3:14 ` [PATCH v8 1/5] ethdev: add telemetry command for " Robin Zhang
2022-05-25 9:24 ` Andrew Rybchenko
2022-05-25 3:14 ` [PATCH v8 2/5] ethdev: common utilities for different SFF specs Robin Zhang
2022-05-25 8:51 ` Andrew Rybchenko
2022-05-25 9:40 ` Andrew Rybchenko
2022-05-25 3:14 ` [PATCH v8 3/5] ethdev: format module EEPROM for SFF-8079 Robin Zhang
2022-05-25 9:55 ` Andrew Rybchenko
2022-05-25 3:14 ` [PATCH v8 4/5] ethdev: format module EEPROM for SFF-8472 Robin Zhang
2022-05-25 11:58 ` Andrew Rybchenko
2022-05-25 3:14 ` [PATCH v8 5/5] ethdev: format module EEPROM for SFF-8636 Robin Zhang
2022-05-25 9:01 ` Andrew Rybchenko
2022-05-25 12:01 ` Andrew Rybchenko
2022-05-26 7:32 ` [PATCH v9 0/5] add telemetry command for show module EEPROM Robin Zhang
2022-05-26 7:32 ` [PATCH v9 1/5] ethdev: add telemetry command for " Robin Zhang
2022-05-26 7:32 ` [PATCH v9 2/5] ethdev: add common code for different SFF specs Robin Zhang
2022-05-26 7:32 ` [PATCH v9 3/5] ethdev: support SFF-8079 module information telemetry Robin Zhang
2022-05-26 7:32 ` [PATCH v9 4/5] ethdev: support SFF-8472 " Robin Zhang
2022-05-26 7:32 ` [PATCH v9 5/5] ethdev: support SFF-8636 " Robin Zhang
2022-05-31 14:43 ` [PATCH v9 0/5] add telemetry command for show module EEPROM Andrew Rybchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220511021442.811950-4-robinx.zhang@intel.com \
--to=robinx.zhang@intel.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@xilinx.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).