DPDK patches and discussions
 help / color / mirror / Atom feed
From: Harman Kalra <hkalra@marvell.com>
To: <dev@dpdk.org>, Jerin Jacob <jerinj@marvell.com>,
	Maciej Czekaj <mczekaj@marvell.com>
Cc: Hanumanth Pothula <hpothula@marvell.com>
Subject: [PATCH 06/12] net/thunderx: implement polling of link state change
Date: Tue, 17 May 2022 23:09:35 +0530	[thread overview]
Message-ID: <20220517173941.189330-6-hkalra@marvell.com> (raw)
In-Reply-To: <20220517173941.189330-1-hkalra@marvell.com>

From: Hanumanth Pothula <hpothula@marvell.com>

Moving the logic of link polling to VF from PF. Now VF
is supposed to poll for the link status, rather PF alerting
VF about any link change.

Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>
---
 drivers/net/thunderx/base/nicvf_mbox.c |  9 ++++++++
 drivers/net/thunderx/base/nicvf_mbox.h |  1 +
 drivers/net/thunderx/nicvf_ethdev.c    | 32 ++++++++++++++------------
 drivers/net/thunderx/nicvf_ethdev.h    | 10 ++++----
 4 files changed, 33 insertions(+), 19 deletions(-)

diff --git a/drivers/net/thunderx/base/nicvf_mbox.c b/drivers/net/thunderx/base/nicvf_mbox.c
index d7209c0083..281027ccce 100644
--- a/drivers/net/thunderx/base/nicvf_mbox.c
+++ b/drivers/net/thunderx/base/nicvf_mbox.c
@@ -440,3 +440,12 @@ nicvf_mbox_cfg_done(struct nicvf *nic)
 	mbx.msg.msg = NIC_MBOX_MSG_CFG_DONE;
 	nicvf_mbox_send_async_msg_to_pf(nic, &mbx);
 }
+
+void
+nicvf_mbox_link_change(struct nicvf *nic)
+{
+	struct nic_mbx mbx = { .msg = { 0 } };
+
+	mbx.msg.msg = NIC_MBOX_MSG_BGX_LINK_CHANGE;
+	nicvf_mbox_send_async_msg_to_pf(nic, &mbx);
+}
diff --git a/drivers/net/thunderx/base/nicvf_mbox.h b/drivers/net/thunderx/base/nicvf_mbox.h
index d0b294362c..490bed206b 100644
--- a/drivers/net/thunderx/base/nicvf_mbox.h
+++ b/drivers/net/thunderx/base/nicvf_mbox.h
@@ -222,5 +222,6 @@ int nicvf_mbox_reset_stat_counters(struct nicvf *nic, uint16_t rx_stat_mask,
 int nicvf_mbox_set_link_up_down(struct nicvf *nic, bool enable);
 void nicvf_mbox_shutdown(struct nicvf *nic);
 void nicvf_mbox_cfg_done(struct nicvf *nic);
+void nicvf_mbox_link_change(struct nicvf *nic);
 
 #endif /* __THUNDERX_NICVF_MBOX__ */
diff --git a/drivers/net/thunderx/nicvf_ethdev.c b/drivers/net/thunderx/nicvf_ethdev.c
index fc334cf734..addbd53735 100644
--- a/drivers/net/thunderx/nicvf_ethdev.c
+++ b/drivers/net/thunderx/nicvf_ethdev.c
@@ -71,6 +71,9 @@ nicvf_link_status_update(struct nicvf *nic,
 	link->link_autoneg = RTE_ETH_LINK_AUTONEG;
 }
 
+/*Poll for link status change by sending NIC_MBOX_MSG_BGX_LINK_CHANGE msg
+ * periodically to PF.
+ */
 static void
 nicvf_interrupt(void *arg)
 {
@@ -78,7 +81,10 @@ nicvf_interrupt(void *arg)
 	struct nicvf *nic = nicvf_pmd_priv(dev);
 	struct rte_eth_link link;
 
-	if (nicvf_reg_poll_interrupts(nic) == NIC_MBOX_MSG_BGX_LINK_CHANGE) {
+	rte_eth_linkstatus_get(dev, &link);
+
+	nicvf_mbox_link_change(nic);
+	if (nic->link_up != link.link_status) {
 		if (dev->data->dev_conf.intr_conf.lsc) {
 			nicvf_link_status_update(nic, &link);
 			rte_eth_linkstatus_set(dev, &link);
@@ -89,7 +95,7 @@ nicvf_interrupt(void *arg)
 		}
 	}
 
-	rte_eal_alarm_set(NICVF_INTR_POLL_INTERVAL_MS * 1000,
+	rte_eal_alarm_set(NICVF_INTR_LINK_POLL_INTERVAL_MS * 1000,
 				nicvf_interrupt, dev);
 }
 
@@ -1841,7 +1847,6 @@ nicvf_vf_stop(struct rte_eth_dev *dev, struct nicvf *nic, bool cleanup)
 static int
 nicvf_dev_close(struct rte_eth_dev *dev)
 {
-	size_t i;
 	struct nicvf *nic = nicvf_pmd_priv(dev);
 
 	PMD_INIT_FUNC_TRACE();
@@ -1850,13 +1855,7 @@ nicvf_dev_close(struct rte_eth_dev *dev)
 
 	nicvf_dev_stop_cleanup(dev, true);
 	nicvf_periodic_alarm_stop(nicvf_interrupt, dev);
-
-	for (i = 0; i < nic->sqs_count; i++) {
-		if (!nic->snicvf[i])
-			continue;
-
-		nicvf_periodic_alarm_stop(nicvf_vf_interrupt, nic->snicvf[i]);
-	}
+	nicvf_periodic_alarm_stop(nicvf_vf_interrupt, nic);
 
 	rte_intr_instance_free(nic->intr_handle);
 
@@ -2169,6 +2168,14 @@ nicvf_eth_dev_init(struct rte_eth_dev *eth_dev)
 
 	nicvf_disable_all_interrupts(nic);
 
+	/* To read mbox messages */
+	ret = nicvf_periodic_alarm_start(nicvf_vf_interrupt, nic);
+	if (ret) {
+		PMD_INIT_LOG(ERR, "Failed to start period alarm");
+		goto fail;
+	}
+
+	/* To poll link status change*/
 	ret = nicvf_periodic_alarm_start(nicvf_interrupt, eth_dev);
 	if (ret) {
 		PMD_INIT_LOG(ERR, "Failed to start period alarm");
@@ -2203,11 +2210,6 @@ nicvf_eth_dev_init(struct rte_eth_dev *eth_dev)
 		eth_dev->data->dev_private = NULL;
 
 		nicvf_periodic_alarm_stop(nicvf_interrupt, eth_dev);
-		ret = nicvf_periodic_alarm_start(nicvf_vf_interrupt, nic);
-		if (ret) {
-			PMD_INIT_LOG(ERR, "Failed to start period alarm");
-			goto fail;
-		}
 
 		/* Detach port by returning positive error number */
 		return ENOTSUP;
diff --git a/drivers/net/thunderx/nicvf_ethdev.h b/drivers/net/thunderx/nicvf_ethdev.h
index cb474e26b8..a947b55fd4 100644
--- a/drivers/net/thunderx/nicvf_ethdev.h
+++ b/drivers/net/thunderx/nicvf_ethdev.h
@@ -10,10 +10,12 @@
 #define THUNDERX_NICVF_PMD_VERSION      "2.0"
 #define THUNDERX_REG_BYTES		8
 
-#define NICVF_INTR_POLL_INTERVAL_MS	50
-#define NICVF_HALF_DUPLEX		0x00
-#define NICVF_FULL_DUPLEX		0x01
-#define NICVF_UNKNOWN_DUPLEX		0xff
+#define NICVF_INTR_POLL_INTERVAL_MS		50
+/* Poll for link state for every 2 sec */
+#define NICVF_INTR_LINK_POLL_INTERVAL_MS	2000
+#define NICVF_HALF_DUPLEX			0x00
+#define NICVF_FULL_DUPLEX			0x01
+#define NICVF_UNKNOWN_DUPLEX			0xff
 
 #define NICVF_RSS_OFFLOAD_PASS1 ( \
 	RTE_ETH_RSS_PORT | \
-- 
2.18.0


  parent reply	other threads:[~2022-05-17 17:40 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-17 17:39 [PATCH 01/12] config: add thundert83 config Harman Kalra
2022-05-17 17:39 ` [PATCH 02/12] event/octeontx: fix SSO fastpath Harman Kalra
2022-05-23 16:10   ` [PATCH v2 01/11] " Harman Kalra
2022-05-23 16:10     ` [PATCH v2 02/11] net/octeontx: fix port close Harman Kalra
2022-05-23 16:10     ` [PATCH v2 03/11] net/octeontx: setting link attributes Harman Kalra
2022-05-23 16:10     ` [PATCH v2 04/11] net/octeontx: handle port reconfiguration Harman Kalra
2022-05-23 16:10     ` [PATCH v2 05/11] net/thunderx: implement polling of link state change Harman Kalra
2022-05-23 16:10     ` [PATCH v2 06/11] net/thunderx: reset Rx DMAC control register Harman Kalra
2022-05-23 16:10     ` [PATCH v2 07/11] net/thunderx: setting link attributes Harman Kalra
2022-05-23 16:10     ` [PATCH v2 08/11] net/octeontx: implement xstats Harman Kalra
2022-05-23 16:10     ` [PATCH v2 09/11] net/octeontx: support allmulticast Harman Kalra
2022-05-23 16:10     ` [PATCH v2 10/11] net/thunderx: device attach from secondary Harman Kalra
2022-05-23 16:11     ` [PATCH v2 11/11] net/thunderx: populate max and min MTU values Harman Kalra
2022-05-24  8:42   ` [PATCH v3 01/11] event/octeontx: fix SSO fastpath Harman Kalra
2022-05-24  8:42     ` [PATCH v3 02/11] net/octeontx: fix port close Harman Kalra
2022-05-24  8:42     ` [PATCH v3 03/11] net/octeontx: setting link attributes Harman Kalra
2022-05-24  8:42     ` [PATCH v3 04/11] net/octeontx: handle port reconfiguration Harman Kalra
2022-05-24  8:42     ` [PATCH v3 05/11] net/thunderx: implement polling of link state change Harman Kalra
2022-05-24  8:42     ` [PATCH v3 06/11] net/thunderx: reset Rx DMAC control register Harman Kalra
2022-05-24  8:42     ` [PATCH v3 07/11] net/thunderx: setting link attributes Harman Kalra
2022-05-24  8:42     ` [PATCH v3 08/11] net/octeontx: implement xstats Harman Kalra
2022-06-09 16:13       ` Jerin Jacob
2022-05-24  8:42     ` [PATCH v3 09/11] net/octeontx: support allmulticast Harman Kalra
2022-05-24  8:42     ` [PATCH v3 10/11] net/thunderx: device attach from secondary Harman Kalra
2022-05-24  8:42     ` [PATCH v3 11/11] net/thunderx: populate max and min MTU values Harman Kalra
2022-06-09 15:55       ` Jerin Jacob
2022-06-09 15:53     ` [PATCH v3 01/11] event/octeontx: fix SSO fastpath Jerin Jacob
2022-05-17 17:39 ` [PATCH 03/12] net/octeontx: fix port close Harman Kalra
2022-05-17 17:39 ` [PATCH 04/12] net/octeontx: setting link attributes Harman Kalra
2022-05-17 17:39 ` [PATCH 05/12] net/octeontx: handle port reconfiguration Harman Kalra
2022-05-17 17:39 ` Harman Kalra [this message]
2022-05-17 17:39 ` [PATCH 07/12] net/thunderx: reset Rx DMAC control register Harman Kalra
2022-05-17 17:39 ` [PATCH 08/12] net/thunderx: setting link attributes Harman Kalra
2022-05-17 17:39 ` [PATCH 09/12] net/octeontx: implement xstats Harman Kalra
2022-05-17 17:39 ` [PATCH 10/12] net/octeontx: support allmulticast Harman Kalra
2022-05-17 17:39 ` [PATCH 11/12] net/thunderx: device attach from secondary Harman Kalra
2022-05-17 17:39 ` [PATCH 12/12] net/thunderx: populate max and min MTU values Harman Kalra
2022-05-18  6:10 ` [PATCH 01/12] config: add thundert83 config Ruifeng Wang
2022-05-23 13:34 ` [PATCH v2] config: add thunderX t83 config Harman Kalra
2022-06-01 22:02   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220517173941.189330-6-hkalra@marvell.com \
    --to=hkalra@marvell.com \
    --cc=dev@dpdk.org \
    --cc=hpothula@marvell.com \
    --cc=jerinj@marvell.com \
    --cc=mczekaj@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).