From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id B11CFA034C; Sun, 22 May 2022 08:00:14 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 3A32342B84; Sun, 22 May 2022 07:59:48 +0200 (CEST) Received: from NAM10-BN7-obe.outbound.protection.outlook.com (mail-bn7nam10on2045.outbound.protection.outlook.com [40.107.92.45]) by mails.dpdk.org (Postfix) with ESMTP id C365E42B7B for ; Sun, 22 May 2022 07:59:46 +0200 (CEST) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=abyJpbfG5z39Pf5u3p4ycPbTmrCT02MUWADne9DpKzfu8rlK8obYs3ZqYZ39yZIu56SXjy/zTJqTRprsNmmxWgSAJOF/AmMR+tYJjWVuJnLmC1n8XMG+b8XWNIKoTe8lhED+8nTSYJhVP06CDb2ShyRzw/WnnwwOETBearY1cIeSz/yOG02QUzkQfbdqfx2jFuZvywn9psOWEHRGNXdA7iEC0SAuErPlLhSYf4Rg1Lxa1nvcHe01gKX9+8Feqs+LimgJcyATGEwqTCQ9qsJbwgbFZ052IZ2GQROBm01EFdW0JfQX6HcpI2DtbgQf+NEhfhaWfdwmuKeflqPf6QsyAA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=WBsXwX/dwvAzw15BfPddRfDJMSY8IVu2tMtjPiguyns=; b=aHsershq3ckBaW8rqWIN191tlMpiLNHbfP6Lmbg6A3upTyaHqP7OpNoVxxg50S6IVMhYeWyzJd0wwiB9Em4FXQcNTKMhfr6UYKIsVmcOzBv3t2tuzvHPnkKFCXkFuXlh5dnW2Ta8LX3jJMhNvdHFDzIMd/bWKt1hbElnTP5ce2hiuiAt6YdhwdMkxXlgwcQM4rgn1LOl6dmkfuqb7eyth7MMqeeJN3Y3C6dmDaP87iVC2DKKRL2Hv/Lgg28p2qG7sufXCUEI1a9mlyykiEJ+VbzsSSX/vKt4QFdNVoVC8ZHxq7jQm//O768MgIOh4K+1dVWQM6nmK8gimScPdybQXw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 12.22.5.236) smtp.rcpttodomain=dpdk.org smtp.mailfrom=nvidia.com; dmarc=pass (p=reject sp=reject pct=100) action=none header.from=nvidia.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=Nvidia.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=WBsXwX/dwvAzw15BfPddRfDJMSY8IVu2tMtjPiguyns=; b=N9eJrlU/REnUGNB0j6mHnmeFfGfDWAb1idziwGRnE0kL7zB+kkcDxZaHsVNcAKt/oQHfQrdKSxY7oYyBb9iHPrXK+qA0BWY49vy2hG8ywCO+whgmYItk8eB1zpEzRh4ZM/TeHlYTLnVnkZ/VOIePi/mnntnUgSI4BFcIxGd54vsqmc4xm9Qo1IkfT+gf4Xbo/pmDnWPUpDCFE+xf1Xw5X53xLu3di6fl9WgUhGsfB+4hQ8L+XxpM0TiYVuCnMORf3h6ZpmEPmOjOxwn5Cwv9KfGRfczJA+h7V+fGNYj89Wls022/QfczPBSHibbzobPrTV5SJniO7ng9F01mSQjlrQ== Received: from DS7PR03CA0041.namprd03.prod.outlook.com (2603:10b6:5:3b5::16) by BL0PR12MB2417.namprd12.prod.outlook.com (2603:10b6:207:45::21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5273.13; Sun, 22 May 2022 05:59:44 +0000 Received: from DM6NAM11FT004.eop-nam11.prod.protection.outlook.com (2603:10b6:5:3b5:cafe::da) by DS7PR03CA0041.outlook.office365.com (2603:10b6:5:3b5::16) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5273.16 via Frontend Transport; Sun, 22 May 2022 05:59:44 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 12.22.5.236) smtp.mailfrom=nvidia.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=nvidia.com; Received-SPF: Pass (protection.outlook.com: domain of nvidia.com designates 12.22.5.236 as permitted sender) receiver=protection.outlook.com; client-ip=12.22.5.236; helo=mail.nvidia.com; pr=C Received: from mail.nvidia.com (12.22.5.236) by DM6NAM11FT004.mail.protection.outlook.com (10.13.172.217) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384) id 15.20.5273.14 via Frontend Transport; Sun, 22 May 2022 05:59:44 +0000 Received: from rnnvmail201.nvidia.com (10.129.68.8) by DRHQMAIL109.nvidia.com (10.27.9.19) with Microsoft SMTP Server (TLS) id 15.0.1497.32; Sun, 22 May 2022 05:59:38 +0000 Received: from nvidia.com (10.126.231.35) by rnnvmail201.nvidia.com (10.129.68.8) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.22; Sat, 21 May 2022 22:59:35 -0700 From: Spike Du To: , , , CC: , Subject: [RFC v2 6/7] net/mlx5: add private API to config host port shaper Date: Sun, 22 May 2022 08:58:59 +0300 Message-ID: <20220522055900.417282-7-spiked@nvidia.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20220522055900.417282-1-spiked@nvidia.com> References: <20220506035645.4101714-1-spiked@nvidia.com> <20220522055900.417282-1-spiked@nvidia.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-Originating-IP: [10.126.231.35] X-ClientProxiedBy: rnnvmail203.nvidia.com (10.129.68.9) To rnnvmail201.nvidia.com (10.129.68.8) X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 87a2ebfd-bfb3-43a5-eff7-08da3bb84511 X-MS-TrafficTypeDiagnostic: BL0PR12MB2417:EE_ X-LD-Processed: 43083d15-7273-40c1-b7db-39efd9ccc17a,ExtAddr X-Microsoft-Antispam-PRVS: X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:12.22.5.236; CTRY:US; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:mail.nvidia.com; PTR:InfoNoRecords; CAT:NONE; SFS:(13230001)(4636009)(40470700004)(46966006)(36840700001)(107886003)(1076003)(8936002)(26005)(6286002)(2616005)(2906002)(83380400001)(336012)(426003)(36860700001)(186003)(36756003)(47076005)(16526019)(7696005)(316002)(54906003)(70586007)(81166007)(30864003)(110136005)(8676002)(5660300002)(55016003)(508600001)(356005)(4326008)(82310400005)(6666004)(70206006)(40460700003)(86362001)(36900700001); DIR:OUT; SFP:1101; X-OriginatorOrg: Nvidia.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 22 May 2022 05:59:44.3608 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 87a2ebfd-bfb3-43a5-eff7-08da3bb84511 X-MS-Exchange-CrossTenant-Id: 43083d15-7273-40c1-b7db-39efd9ccc17a X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=43083d15-7273-40c1-b7db-39efd9ccc17a; Ip=[12.22.5.236]; Helo=[mail.nvidia.com] X-MS-Exchange-CrossTenant-AuthSource: DM6NAM11FT004.eop-nam11.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: BL0PR12MB2417 X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Host port shaper can be configured with QSHR(QoS Shaper Host Register). Add check in build files to enable this function or not. The host shaper configuration affects all the ethdev ports belonging to the same host port. Host shaper can configure shaper rate and lwm-triggered for a host port. The shaper limits the rate of traffic from host port to wire port. If lwm-triggered is enabled, a 100Mbps shaper is enabled automatically when one of the host port's Rx queues receives LWM(Limit Watermark) event. Signed-off-by: Spike Du --- doc/guides/nics/mlx5.rst | 26 +++++++ doc/guides/rel_notes/release_22_07.rst | 1 + drivers/common/mlx5/linux/meson.build | 13 ++++ drivers/common/mlx5/mlx5_prm.h | 25 ++++++ drivers/net/mlx5/mlx5.h | 2 + drivers/net/mlx5/mlx5_rx.c | 103 +++++++++++++++++++++++++ drivers/net/mlx5/rte_pmd_mlx5.h | 30 +++++++ drivers/net/mlx5/version.map | 2 + 8 files changed, 202 insertions(+) diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index 79f56018ef..3da6f5a03c 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -94,6 +94,7 @@ Features - Sub-Function representors. - Sub-Function. - Rx queue LWM (Limit WaterMark) configuration. +- Host shaper support. Limitations @@ -525,6 +526,12 @@ Limitations - Doesn't support shared Rx queue and Hairpin Rx queue. +- Host shaper: + + - Support BlueField series NIC from BlueField 2. + - When configure host shaper with MLX5_HOST_SHAPER_FLAG_LWM_TRIGGERED flag set, + only rate 0 and 100Mbps are supported. + Statistics ---------- @@ -1692,3 +1699,22 @@ LWM (Limit WaterMark) is a per Rx queue attribute, it should be configured as a percentage of the Rx queue size. When Rx queue fullness is above LWM, an event is sent to PMD. +Host shaper introduction +------------------------ + +Host shaper register is per host port register which sets a shaper +on the host port. +All VF/hostPF representors belonging to one host port share one host shaper. +For example, if representor 0 and representor 1 belong to same host port, +and a host shaper rate of 1Gbps is configured, the shaper throttles both +representors' traffic from host. +Host shaper has two modes for setting the shaper, immediate and deferred to +LWM event trigger. In immediate mode, the rate limit is configured immediately +to host shaper. When deferring to LWM trigger, the shaper is not set until an +LWM event is received by any Rx queue in a VF representor belonging to the host +port. The only rate supported for deferred mode is 100Mbps (there is no limit +on the supported rates for immediate mode). In deferred mode, the shaper is set +on the host port by the firmware upon receiving the LMW event, which allows +throttling host traffic on LWM events at minimum latency, preventing excess +drops in the Rx queue. + diff --git a/doc/guides/rel_notes/release_22_07.rst b/doc/guides/rel_notes/release_22_07.rst index 253bc7e381..21879bda41 100644 --- a/doc/guides/rel_notes/release_22_07.rst +++ b/doc/guides/rel_notes/release_22_07.rst @@ -81,6 +81,7 @@ New Features * Added support for MTU on Windows. * Added matching and RSS on IPsec ESP. * Added Rx queue LWM(Limit WaterMark) support. + * Added host shaper support. * **Updated Marvell cnxk crypto driver.** diff --git a/drivers/common/mlx5/linux/meson.build b/drivers/common/mlx5/linux/meson.build index 5335f5b027..51c6e5dd2e 100644 --- a/drivers/common/mlx5/linux/meson.build +++ b/drivers/common/mlx5/linux/meson.build @@ -45,6 +45,13 @@ if static_ibverbs ext_deps += declare_dependency(link_args:ibv_ldflags.split()) endif +libmtcr_ul_found = false +lib = cc.find_library('mtcr_ul', required:false) +if lib.found() and run_command('meson', '--version').stdout().version_compare('>= 0.49.2') + libmtcr_ul_found = true + ext_deps += lib +endif + sources += files('mlx5_nl.c') sources += files('mlx5_common_auxiliary.c') sources += files('mlx5_common_os.c') @@ -207,6 +214,12 @@ has_sym_args = [ [ 'HAVE_MLX5_IBV_IMPORT_CTX_PD_AND_MR', 'infiniband/verbs.h', 'ibv_import_device' ], ] +if libmtcr_ul_found + has_sym_args += [ + [ 'HAVE_MLX5_MSTFLINT', 'mstflint/mtcr.h', + 'mopen'], + ] +endif config = configuration_data() foreach arg:has_sym_args config.set(arg[0], cc.has_header_symbol(arg[1], arg[2], dependencies: libs)) diff --git a/drivers/common/mlx5/mlx5_prm.h b/drivers/common/mlx5/mlx5_prm.h index 3b5e60532a..92d05a7368 100644 --- a/drivers/common/mlx5/mlx5_prm.h +++ b/drivers/common/mlx5/mlx5_prm.h @@ -3771,6 +3771,7 @@ enum { MLX5_CRYPTO_COMMISSIONING_REGISTER_ID = 0xC003, MLX5_IMPORT_KEK_HANDLE_REGISTER_ID = 0xC004, MLX5_CREDENTIAL_HANDLE_REGISTER_ID = 0xC005, + MLX5_QSHR_REGISTER_ID = 0x4030, }; struct mlx5_ifc_register_mtutc_bits { @@ -3785,6 +3786,30 @@ struct mlx5_ifc_register_mtutc_bits { u8 time_adjustment[0x20]; }; +struct mlx5_ifc_ets_global_config_register_bits { + u8 reserved_at_0[0x2]; + u8 rate_limit_update[0x1]; + u8 reserved_at_3[0x29]; + u8 max_bw_units[0x4]; + u8 reserved_at_48[0x8]; + u8 max_bw_value[0x8]; +}; + +#define ETS_GLOBAL_CONFIG_BW_UNIT_DISABLED 0x0 +#define ETS_GLOBAL_CONFIG_BW_UNIT_HUNDREDS_MBPS 0x3 +#define ETS_GLOBAL_CONFIG_BW_UNIT_GBPS 0x4 + +struct mlx5_ifc_register_qshr_bits { + u8 reserved_at_0[0x4]; + u8 connected_host[0x1]; + u8 vqos[0x1]; + u8 fast_response[0x1]; + u8 reserved_at_7[0x1]; + u8 local_port[0x8]; + u8 reserved_at_16[0x230]; + struct mlx5_ifc_ets_global_config_register_bits global_config; +}; + #define MLX5_MTUTC_TIMESTAMP_MODE_INTERNAL_TIMER 0 #define MLX5_MTUTC_TIMESTAMP_MODE_REAL_TIME 1 diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index a76f2fed3d..8af84aef50 100644 --- a/drivers/net/mlx5/mlx5.h +++ b/drivers/net/mlx5/mlx5.h @@ -1271,6 +1271,8 @@ struct mlx5_dev_ctx_shared { void *devx_channel_lwm; struct rte_intr_handle *intr_handle_lwm; pthread_mutex_t lwm_config_lock; + uint32_t host_shaper_rate:8; + uint32_t lwm_triggered:1; /* Availability of mreg_c's. */ struct mlx5_dev_shared_port port[]; /* per device port data array. */ }; diff --git a/drivers/net/mlx5/mlx5_rx.c b/drivers/net/mlx5/mlx5_rx.c index d30522e6df..3f7b2620df 100644 --- a/drivers/net/mlx5/mlx5_rx.c +++ b/drivers/net/mlx5/mlx5_rx.c @@ -28,6 +28,9 @@ #include "mlx5_rxtx.h" #include "mlx5_devx.h" #include "mlx5_rx.h" +#ifdef HAVE_MLX5_MSTFLINT +#include +#endif static __rte_always_inline uint32_t @@ -1376,3 +1379,103 @@ mlx5_rx_queue_lwm_set(struct rte_eth_dev *dev, uint16_t rx_queue_id, return ret; } +/** + * Mlx5 access register function to configure host shaper. + * It calls API in libmtcr_ul to access QSHR(Qos Shaper Host Register) + * in firmware. + * + * @param dev + * Pointer to rte_eth_dev. + * @param lwm_triggered + * Flag to enable/disable lwm_triggered bit in QSHR. + * @param rate + * Host shaper rate, unit is 100Mbps, set to 0 means disable the shaper. + * @return + * 0 : operation success. + * Otherwise: + * - ENOENT - no ibdev interface. + * - EBUSY - the register access unit is busy. + * - EIO - the register access command meets IO error. + */ +static int +mlxreg_host_shaper_config(struct rte_eth_dev *dev, + bool lwm_triggered, uint8_t rate) +{ +#ifdef HAVE_MLX5_MSTFLINT + struct mlx5_priv *priv = dev->data->dev_private; + uint32_t data[MLX5_ST_SZ_DW(register_qshr)] = {0}; + int rc, retry_count = 3; + mfile *mf = NULL; + int status; + void *ptr; + + mf = mopen(priv->sh->ibdev_name); + if (!mf) { + DRV_LOG(WARNING, "mopen failed\n"); + rte_errno = ENOENT; + return -rte_errno; + } + MLX5_SET(register_qshr, data, connected_host, 1); + MLX5_SET(register_qshr, data, fast_response, lwm_triggered ? 1 : 0); + MLX5_SET(register_qshr, data, local_port, 1); + ptr = MLX5_ADDR_OF(register_qshr, data, global_config); + MLX5_SET(ets_global_config_register, ptr, rate_limit_update, 1); + MLX5_SET(ets_global_config_register, ptr, max_bw_units, + rate ? ETS_GLOBAL_CONFIG_BW_UNIT_HUNDREDS_MBPS : + ETS_GLOBAL_CONFIG_BW_UNIT_DISABLED); + MLX5_SET(ets_global_config_register, ptr, max_bw_value, rate); + do { + rc = maccess_reg(mf, + MLX5_QSHR_REGISTER_ID, + MACCESS_REG_METHOD_SET, + (u_int32_t *)&data[0], + sizeof(data), + sizeof(data), + sizeof(data), + &status); + if ((rc != ME_ICMD_STATUS_IFC_BUSY && + status != ME_REG_ACCESS_BAD_PARAM) || + !(mf->flags & MDEVS_REM)) { + break; + } + DRV_LOG(WARNING, "%s retry.", __func__); + usleep(10000); + } while (retry_count-- > 0); + mclose(mf); + rte_errno = (rc == ME_REG_ACCESS_DEV_BUSY) ? EBUSY : EIO; + return rc ? -rte_errno : 0; +#else + (void)dev; + (void)lwm_triggered; + (void)rate; + return -1; +#endif +} + +int rte_pmd_mlx5_host_shaper_config(int port_id, uint8_t rate, + uint32_t flags) +{ + struct rte_eth_dev *dev = &rte_eth_devices[port_id]; + struct mlx5_priv *priv = dev->data->dev_private; + bool lwm_triggered = + !!(flags & RTE_BIT32(MLX5_HOST_SHAPER_FLAG_LWM_TRIGGERED)); + + if (!lwm_triggered) { + priv->sh->host_shaper_rate = rate; + } else { + switch (rate) { + case 0: + /* Rate 0 means disable lwm_triggered. */ + priv->sh->lwm_triggered = 0; + break; + case 1: + /* Rate 1 means enable lwm_triggered. */ + priv->sh->lwm_triggered = 1; + break; + default: + return -ENOTSUP; + } + } + return mlxreg_host_shaper_config(dev, priv->sh->lwm_triggered, + priv->sh->host_shaper_rate); +} diff --git a/drivers/net/mlx5/rte_pmd_mlx5.h b/drivers/net/mlx5/rte_pmd_mlx5.h index 6e7907ee59..9964126df5 100644 --- a/drivers/net/mlx5/rte_pmd_mlx5.h +++ b/drivers/net/mlx5/rte_pmd_mlx5.h @@ -109,6 +109,36 @@ __rte_experimental int rte_pmd_mlx5_external_rx_queue_id_unmap(uint16_t port_id, uint16_t dpdk_idx); +/** + * The rate of the host port shaper will be updated directly at the next + * LWM event to the rate that comes with this flag set; set rate 0 + * to disable this rate update. + * Unset this flag to update the rate of the host port shaper directly in + * the API call; use rate 0 to disable the current shaper. + */ +#define MLX5_HOST_SHAPER_FLAG_LWM_TRIGGERED 0 + +/** + * Configure a HW shaper to limit Tx rate for a host port. + * The configuration will affect all the ethdev ports belonging to + * the same rte_device. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] rate + * Unit is 100Mbps, setting the rate to 0 disables the shaper. + * @param[in] flags + * Host shaper flags. + * @return + * 0 : operation success. + * Otherwise: + * - ENOENT - no ibdev interface. + * - EBUSY - the register access unit is busy. + * - EIO - the register access command meets IO error. + */ +__rte_experimental +int rte_pmd_mlx5_host_shaper_config(int port_id, uint8_t rate, uint32_t flags); + #ifdef __cplusplus } #endif diff --git a/drivers/net/mlx5/version.map b/drivers/net/mlx5/version.map index 79cb79acc6..c97dfe440a 100644 --- a/drivers/net/mlx5/version.map +++ b/drivers/net/mlx5/version.map @@ -12,4 +12,6 @@ EXPERIMENTAL { # added in 22.03 rte_pmd_mlx5_external_rx_queue_id_map; rte_pmd_mlx5_external_rx_queue_id_unmap; + # added in 22.07 + rte_pmd_mlx5_host_shaper_config; }; -- 2.27.0