From: <psatheesh@marvell.com>
To: Radu Nicolau <radu.nicolau@intel.com>, Akhil Goyal <gakhil@marvell.com>
Cc: <dev@dpdk.org>, Satheesh Paul <psatheesh@marvell.com>
Subject: [dpdk-dev] [PATCH v2] examples/ipsec-secgw: support more flow patterns and actions
Date: Tue, 24 May 2022 11:02:15 +0530 [thread overview]
Message-ID: <20220524053215.952952-1-psatheesh@marvell.com> (raw)
In-Reply-To: <20220419082537.270116-1-psatheesh@marvell.com>
From: Satheesh Paul <psatheesh@marvell.com>
Added support to create flow rules with count, mark and
security actions and mark pattern.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
---
v2:
* Updated documentation in ipsec_secgw.rst
doc/guides/sample_app_ug/ipsec_secgw.rst | 58 ++++-
examples/ipsec-secgw/flow.c | 280 +++++++++++++++++++----
examples/ipsec-secgw/flow.h | 1 +
examples/ipsec-secgw/ipsec-secgw.c | 3 +-
4 files changed, 288 insertions(+), 54 deletions(-)
diff --git a/doc/guides/sample_app_ug/ipsec_secgw.rst b/doc/guides/sample_app_ug/ipsec_secgw.rst
index d93acf0667..711026d2ef 100644
--- a/doc/guides/sample_app_ug/ipsec_secgw.rst
+++ b/doc/guides/sample_app_ug/ipsec_secgw.rst
@@ -886,16 +886,32 @@ The flow rule syntax is shown as follows:
.. code-block:: console
- flow <ip_ver> <src_ip> <dst_ip> <port> <queue>
-
+ flow <mark> <eth> <ip_ver> <src_ip> <dst_ip> <port> <queue> \
+ <count> <security> <set_mark>
where each options means:
+``<mark>``
+
+ * Set RTE_FLOW_ITEM_TYPE_MARK pattern item with the given mark value.
+
+ * Optional: Yes, this pattern is not set by default.
+
+ * Syntax: *mark X*
+
+``<eth>``
+
+ * Set RTE_FLOW_ITEM_TYPE_ETH pattern item. This matches all ethernet packets.
+
+ * Optional: Yes, this pattern is not set by default.
+
+ * Syntax: *eth*
+
``<ip_ver>``
* IP protocol version
- * Optional: No
+ * Optional: Yes, this pattern is not set by default.
* Available options:
@@ -940,6 +956,30 @@ where each options means:
* Syntax: *queue X*
+``<count>``
+
+ * Set RTE_FLOW_ACTION_TYPE_COUNT action.
+
+ * Optional: yes, this action is not set by default.
+
+ * Syntax: *count*
+
+``<security>``
+
+ * Set RTE_FLOW_ITEM_TYPE_ESP pattern and RTE_FLOW_ACTION_TYPE_SECURITY action.
+
+ * Optional: yes, this pattern and action are not set by default.
+
+ * Syntax: *security*
+
+``<set_mark>``
+
+ * Set RTE_FLOW_ACTION_TYPE_MARK action with the given mark value.
+
+ * Optional: yes, this action is not set by default.
+
+ * Syntax: *set_mark X*
+
Example flow rules:
.. code-block:: console
@@ -948,6 +988,18 @@ Example flow rules:
flow ipv6 dst 1111:1111:1111:1111:1111:1111:1111:5555/116 port 1 queue 0
+ flow mark 123 ipv4 dst 192.168.0.0/16 port 0 queue 0 count
+
+ flow eth ipv4 dst 192.168.0.0/16 port 0 queue 0 count
+
+ flow ipv4 dst 192.168.0.0/16 port 0 queue 0 count
+
+ flow ipv4 dst 192.168.0.0/16 port 0 queue 0
+
+ flow port 0 security set_mark 123
+
+ flow ipv4 dst 1.1.0.0/16 port 0 count set_mark 123 security
+
Neighbour rule syntax
^^^^^^^^^^^^^^^^^^^^^
diff --git a/examples/ipsec-secgw/flow.c b/examples/ipsec-secgw/flow.c
index 1a1ec7861c..23962f35e7 100644
--- a/examples/ipsec-secgw/flow.c
+++ b/examples/ipsec-secgw/flow.c
@@ -15,7 +15,9 @@
#define FLOW_RULES_MAX 128
struct flow_rule_entry {
+ uint8_t is_eth;
uint8_t is_ipv4;
+ uint8_t is_ipv6;
RTE_STD_C11
union {
struct {
@@ -27,8 +29,15 @@ struct flow_rule_entry {
struct rte_flow_item_ipv6 mask;
} ipv6;
};
+ struct rte_flow_item_mark mark_val;
uint16_t port;
uint16_t queue;
+ bool is_queue_set;
+ bool enable_count;
+ bool enable_mark;
+ bool set_security_action;
+ bool set_mark_action;
+ uint32_t mark_action_val;
struct rte_flow *flow;
} flow_rule_tbl[FLOW_RULES_MAX];
@@ -64,8 +73,9 @@ ipv4_addr_cpy(rte_be32_t *spec, rte_be32_t *mask, char *token,
memcpy(mask, &rte_flow_item_ipv4_mask.hdr.src_addr, sizeof(ip));
*spec = ip.s_addr;
+
if (depth < 32)
- *mask = *mask << (32-depth);
+ *mask = htonl(*mask << (32 - depth));
return 0;
}
@@ -124,7 +134,7 @@ parse_flow_tokens(char **tokens, uint32_t n_tokens,
struct parse_status *status)
{
struct flow_rule_entry *rule;
- uint32_t ti;
+ uint32_t ti = 0;
if (nb_flow_rule >= FLOW_RULES_MAX) {
printf("Too many flow rules\n");
@@ -134,49 +144,73 @@ parse_flow_tokens(char **tokens, uint32_t n_tokens,
rule = &flow_rule_tbl[nb_flow_rule];
memset(rule, 0, sizeof(*rule));
- if (strcmp(tokens[0], "ipv4") == 0) {
- rule->is_ipv4 = 1;
- } else if (strcmp(tokens[0], "ipv6") == 0) {
- rule->is_ipv4 = 0;
- } else {
- APP_CHECK(0, status, "unrecognized input \"%s\"", tokens[0]);
- return;
- }
-
- for (ti = 1; ti < n_tokens; ti++) {
- if (strcmp(tokens[ti], "src") == 0) {
+ for (ti = 0; ti < n_tokens; ti++) {
+ if (strcmp(tokens[ti], "mark") == 0) {
INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ APP_CHECK_TOKEN_IS_NUM(tokens, ti, status);
if (status->status < 0)
return;
- if (rule->is_ipv4) {
+ rule->mark_val.id = atoi(tokens[ti]);
+ rule->enable_mark = true;
+ continue;
+ }
+ if (strcmp(tokens[ti], "eth") == 0) {
+ rule->is_eth = true;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "ipv4") == 0) {
+ rule->is_ipv4 = true;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ if (strcmp(tokens[ti], "src") == 0) {
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
if (ipv4_addr_cpy(&rule->ipv4.spec.hdr.src_addr,
&rule->ipv4.mask.hdr.src_addr,
tokens[ti], status))
return;
- } else {
- if (ipv6_addr_cpy(rule->ipv6.spec.hdr.src_addr,
- rule->ipv6.mask.hdr.src_addr,
+ }
+ if (strcmp(tokens[ti], "dst") == 0) {
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ if (ipv4_addr_cpy(&rule->ipv4.spec.hdr.src_addr,
+ &rule->ipv4.mask.hdr.src_addr,
tokens[ti], status))
return;
}
+ continue;
}
- if (strcmp(tokens[ti], "dst") == 0) {
+ if (strcmp(tokens[ti], "ipv6") == 0) {
+ rule->is_ipv6 = true;
INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
if (status->status < 0)
return;
-
- if (rule->is_ipv4) {
- if (ipv4_addr_cpy(&rule->ipv4.spec.hdr.dst_addr,
- &rule->ipv4.mask.hdr.dst_addr,
+ if (strcmp(tokens[ti], "src") == 0) {
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ if (ipv6_addr_cpy(rule->ipv6.spec.hdr.src_addr,
+ rule->ipv6.mask.hdr.src_addr,
tokens[ti], status))
return;
- } else {
- if (ipv6_addr_cpy(rule->ipv6.spec.hdr.dst_addr,
- rule->ipv6.mask.hdr.dst_addr,
+ }
+ if (strcmp(tokens[ti], "dst") == 0) {
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ if (ipv6_addr_cpy(rule->ipv6.spec.hdr.src_addr,
+ rule->ipv6.mask.hdr.src_addr,
tokens[ti], status))
return;
}
+ continue;
}
if (strcmp(tokens[ti], "port") == 0) {
@@ -188,6 +222,7 @@ parse_flow_tokens(char **tokens, uint32_t n_tokens,
return;
rule->port = atoi(tokens[ti]);
+ continue;
}
if (strcmp(tokens[ti], "queue") == 0) {
@@ -199,50 +234,129 @@ parse_flow_tokens(char **tokens, uint32_t n_tokens,
return;
rule->queue = atoi(tokens[ti]);
+ rule->is_queue_set = true;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "count") == 0) {
+ rule->enable_count = true;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "security") == 0) {
+ rule->set_security_action = true;
+ continue;
}
+
+ if (strcmp(tokens[ti], "set_mark") == 0) {
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ APP_CHECK_TOKEN_IS_NUM(tokens, ti, status);
+ if (status->status < 0)
+ return;
+
+ rule->set_mark_action = true;
+ rule->mark_action_val = atoi(tokens[ti]);
+ continue;
+ }
+
+ sprintf(status->parse_msg, "Unrecognized input:%s\n", tokens[ti]);
+ status->status = -1;
+ return;
}
+ printf("\n");
nb_flow_rule++;
}
-#define MAX_RTE_FLOW_PATTERN (3)
-#define MAX_RTE_FLOW_ACTIONS (2)
+#define MAX_RTE_FLOW_PATTERN (4)
+#define MAX_RTE_FLOW_ACTIONS (5)
static void
flow_init_single(struct flow_rule_entry *rule)
{
- struct rte_flow_item pattern[MAX_RTE_FLOW_PATTERN] = {};
struct rte_flow_action action[MAX_RTE_FLOW_ACTIONS] = {};
+ struct rte_flow_item pattern[MAX_RTE_FLOW_PATTERN] = {};
+ struct rte_flow_action_queue queue_action;
+ struct rte_flow_action_mark mark_action;
+ int ret, pattern_idx = 0, act_idx = 0;
+ struct rte_flow_item_mark mark_mask;
struct rte_flow_attr attr = {};
- struct rte_flow_error err;
- int ret;
+ struct rte_flow_error err = {};
attr.egress = 0;
attr.ingress = 1;
- action[0].type = RTE_FLOW_ACTION_TYPE_QUEUE;
- action[0].conf = &(struct rte_flow_action_queue) {
- .index = rule->queue,
- };
- action[1].type = RTE_FLOW_ACTION_TYPE_END;
+ if (rule->is_queue_set) {
+ queue_action.index = rule->queue;
+ action[act_idx].type = RTE_FLOW_ACTION_TYPE_QUEUE;
+ action[act_idx].conf = &queue_action;
+ act_idx++;
+ }
+
+ if (rule->enable_count) {
+ action[act_idx].type = RTE_FLOW_ACTION_TYPE_COUNT;
+ act_idx++;
+ }
+
+ if (rule->set_security_action) {
+ action[act_idx].type = RTE_FLOW_ACTION_TYPE_SECURITY;
+ action[act_idx].conf = NULL;
+ act_idx++;
+ }
+
+ if (rule->set_mark_action) {
+ mark_action.id = rule->mark_action_val;
+ action[act_idx].type = RTE_FLOW_ACTION_TYPE_MARK;
+ action[act_idx].conf = &mark_action;
+ act_idx++;
+ }
- pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH;
+ action[act_idx].type = RTE_FLOW_ACTION_TYPE_END;
+ action[act_idx].conf = NULL;
+
+ if (rule->enable_mark) {
+ mark_mask.id = UINT32_MAX;
+ pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_MARK;
+ pattern[pattern_idx].spec = &rule->mark_val;
+ pattern[pattern_idx].mask = &mark_mask;
+ pattern_idx++;
+ }
+
+ if (rule->is_eth) {
+ pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_ETH;
+ pattern_idx++;
+ }
if (rule->is_ipv4) {
- pattern[1].type = RTE_FLOW_ITEM_TYPE_IPV4;
- pattern[1].spec = &rule->ipv4.spec;
- pattern[1].mask = &rule->ipv4.mask;
- } else {
- pattern[1].type = RTE_FLOW_ITEM_TYPE_IPV6;
- pattern[1].spec = &rule->ipv6.spec;
- pattern[1].mask = &rule->ipv6.mask;
+ pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_IPV4;
+ pattern[pattern_idx].spec = &rule->ipv4.spec;
+ pattern[pattern_idx].mask = &rule->ipv4.mask;
+ pattern_idx++;
+ }
+
+ if (rule->is_ipv6) {
+ pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_IPV6;
+ pattern[pattern_idx].spec = &rule->ipv6.spec;
+ pattern[pattern_idx].mask = &rule->ipv6.mask;
+ pattern_idx++;
+ }
+
+ if (rule->set_security_action) {
+ pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_ESP;
+ pattern[pattern_idx].spec = NULL;
+ pattern[pattern_idx].mask = NULL;
+ pattern[pattern_idx].last = NULL;
+ pattern_idx++;
}
- pattern[2].type = RTE_FLOW_ITEM_TYPE_END;
+ pattern[pattern_idx].type = RTE_FLOW_ITEM_TYPE_END;
ret = rte_flow_validate(rule->port, &attr, pattern, action, &err);
if (ret < 0) {
RTE_LOG(ERR, IPSEC, "Flow validation failed %s\n", err.message);
+ rule->flow = 0;
return;
}
@@ -251,6 +365,56 @@ flow_init_single(struct flow_rule_entry *rule)
RTE_LOG(ERR, IPSEC, "Flow creation return %s\n", err.message);
}
+void
+flow_print_counters(void)
+{
+ struct rte_flow_query_count count_query;
+ struct rte_flow_action action;
+ struct flow_rule_entry *rule;
+ struct rte_flow_error error;
+ int i = 0, ret = 0;
+
+ action.type = RTE_FLOW_ACTION_TYPE_COUNT;
+
+ for (i = 0; i < nb_flow_rule; i++) {
+ rule = &flow_rule_tbl[i];
+ if (!rule->flow || !rule->enable_count)
+ continue;
+
+ /* Poisoning to make sure PMDs update it in case of error. */
+ memset(&error, 0x55, sizeof(error));
+ memset(&count_query, 0, sizeof(count_query));
+ ret = rte_flow_query(rule->port, rule->flow, &action,
+ &count_query, &error);
+ if (ret)
+ RTE_LOG(ERR, IPSEC,
+ "Failed to get flow counter "
+ " for port %u, err msg: %s\n",
+ rule->port, error.message);
+
+ printf("Flow #%3d:", i);
+ if (rule->is_ipv4) {
+ printf(" spec ipv4 ");
+ ipv4_hdr_print(&rule->ipv4.spec.hdr);
+ }
+ if (rule->is_ipv6) {
+ printf(" spec ipv6 ");
+ ipv6_hdr_print(&rule->ipv6.spec.hdr);
+ }
+
+ if (rule->set_security_action)
+ printf(" Security action set,");
+
+ if (rule->enable_mark)
+ printf(" Mark Enabled");
+
+ printf(" Port: %d,", rule->port);
+ if (rule->is_queue_set)
+ printf(" Queue: %d", rule->queue);
+ printf(" Hits: %"PRIu64"\n", count_query.hits);
+ }
+}
+
void
flow_init(void)
{
@@ -264,21 +428,37 @@ flow_init(void)
for (i = 0; i < nb_flow_rule; i++) {
rule = &flow_rule_tbl[i];
+ printf("Flow #%3d: ", i);
if (rule->is_ipv4) {
- printf("Flow #%3d: spec ipv4 ", i);
+ printf("spec ipv4 ");
ipv4_hdr_print(&rule->ipv4.spec.hdr);
printf("\n");
- printf(" mask ipv4 ");
+ printf(" mask ipv4 ");
ipv4_hdr_print(&rule->ipv4.mask.hdr);
- } else {
- printf("Flow #%3d: spec ipv6 ", i);
+ }
+ if (rule->is_ipv6) {
+ printf("spec ipv6 ");
ipv6_hdr_print(&rule->ipv6.spec.hdr);
printf("\n");
- printf(" mask ipv6 ");
+ printf(" mask ipv6 ");
ipv6_hdr_print(&rule->ipv6.mask.hdr);
}
- printf("\tPort: %d, Queue: %d", rule->port, rule->queue);
+ if (rule->enable_mark)
+ printf(", Mark enabled");
+
+ printf("\tPort: %d,", rule->port);
+ if (rule->is_queue_set)
+ printf(" Queue: %d,", rule->queue);
+
+ if (rule->set_security_action)
+ printf(" Security action set,");
+
+ if (rule->set_mark_action)
+ printf(" Mark: %d,", rule->mark_action_val);
+
+ if (rule->enable_count)
+ printf(" Counter enabled,");
if (rule->flow == NULL)
printf(" [UNSUPPORTED]");
diff --git a/examples/ipsec-secgw/flow.h b/examples/ipsec-secgw/flow.h
index 1b1b4774e4..9492d06346 100644
--- a/examples/ipsec-secgw/flow.h
+++ b/examples/ipsec-secgw/flow.h
@@ -11,5 +11,6 @@ void parse_flow_tokens(char **tokens, uint32_t n_tokens,
struct parse_status *status);
void flow_init(void);
+void flow_print_counters(void);
#endif /* _FLOW_H_ */
diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index 42b5081840..244453e06e 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -3271,7 +3271,6 @@ ipsec_secgw_telemetry_init(void)
"Optional Parameters: int <logical core id>");
}
-
int32_t
main(int32_t argc, char **argv)
{
@@ -3512,6 +3511,8 @@ main(int32_t argc, char **argv)
printf(" Done\n");
}
+ flow_print_counters();
+
RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
--
2.35.3
next prev parent reply other threads:[~2022-05-24 5:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-19 8:25 [dpdk-dev] [PATCH] " psatheesh
2022-05-24 5:32 ` psatheesh [this message]
2022-06-03 3:16 ` [dpdk-dev] [PATCH v3] " psatheesh
2022-06-17 9:52 ` Zhang, Roy Fan
2022-06-17 10:59 ` Satheesh Paul Antonysamy
2022-06-17 10:57 ` [dpdk-dev] [PATCH v4] " psatheesh
2022-06-21 12:53 ` Akhil Goyal
2022-06-21 17:25 ` Akhil Goyal
2022-06-22 1:22 ` [dpdk-dev] [PATCH v5] " psatheesh
2022-06-23 8:35 ` Zhang, Roy Fan
2022-06-28 8:22 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220524053215.952952-1-psatheesh@marvell.com \
--to=psatheesh@marvell.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=radu.nicolau@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).