From: Muhammad Jawad Hussain <jawad.hussain@emumba.com>
To: dev@dpdk.org
Cc: jawad.hussain@emumba.com
Subject: [PATCH v2] examples/ethtool: update rxmode to increase functionality
Date: Sun, 29 May 2022 19:28:50 +0500 [thread overview]
Message-ID: <20220529142850.76501-1-jawad.hussain@emumba.com> (raw)
previously rxmode functionality did not allow the user to choose
between different vfs nor did it allow the user to choose rxmode settings
by default it was set to vf = 0, rxmode = AUPE and the on/off state toggled
without letting the user know what state it is in
also there were no error messages
Changes:
- added flag for vf id
- added flags for AUPE|ROPE|BAM|MPE rxmodes
- added flag for on/off
- added error messages
- added info messages
Signed-off-by: Muhammad Jawad Hussain <jawad.hussain@emumba.com>
---
doc/guides/sample_app_ug/ethtool.rst | 2 +-
examples/ethtool/ethtool-app/ethapp.c | 134 ++++++++++++++++++++------
examples/ethtool/lib/rte_ethtool.c | 38 --------
examples/ethtool/meson.build | 4 +-
4 files changed, 110 insertions(+), 68 deletions(-)
diff --git a/doc/guides/sample_app_ug/ethtool.rst b/doc/guides/sample_app_ug/ethtool.rst
index 159e9e0639..2e53084cc3 100644
--- a/doc/guides/sample_app_ug/ethtool.rst
+++ b/doc/guides/sample_app_ug/ethtool.rst
@@ -53,7 +53,7 @@ they do as follows:
* ``portstats``: Print port statistics
* ``regs``: Dump port register(s) to file
* ``ringparam``: Get/set ring parameters
-* ``rxmode``: Toggle port Rx mode
+* ``rxmode``: Set rxmode of vfs on ports
* ``stop``: Stop port
* ``validate``: Check that given MAC address is valid unicast address
* ``vlan``: Add/remove VLAN id
diff --git a/examples/ethtool/ethtool-app/ethapp.c b/examples/ethtool/ethtool-app/ethapp.c
index 78e86534e8..214433a98b 100644
--- a/examples/ethtool/ethtool-app/ethapp.c
+++ b/examples/ethtool/ethtool-app/ethapp.c
@@ -8,12 +8,30 @@
#include <cmdline_parse_etheraddr.h>
#include <cmdline_socket.h>
#include <cmdline.h>
-
+#ifdef RTE_NET_IXGBE
+#include <rte_pmd_ixgbe.h>
+#endif
+#ifdef RTE_NET_BNXT
+#include <rte_pmd_bnxt.h>
+#endif
#include "rte_ethtool.h"
#include "ethapp.h"
#define EEPROM_DUMP_CHUNKSIZE 1024
+typedef uint16_t portid_t;
+
+/* *** CONFIGURE VF RECEIVE MODE *** */
+struct cmd_set_vf_rxmode {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t port;
+ portid_t port_id;
+ cmdline_fixed_string_t vf;
+ uint8_t vf_id;
+ cmdline_fixed_string_t what;
+ cmdline_fixed_string_t mode;
+ cmdline_fixed_string_t on;
+};
struct pcmd_get_params {
cmdline_fixed_string_t cmd;
@@ -65,8 +83,6 @@ cmdline_parse_token_string_t pcmd_open_token_cmd =
TOKEN_STRING_INITIALIZER(struct pcmd_int_params, cmd, "open");
cmdline_parse_token_string_t pcmd_stop_token_cmd =
TOKEN_STRING_INITIALIZER(struct pcmd_int_params, cmd, "stop");
-cmdline_parse_token_string_t pcmd_rxmode_token_cmd =
- TOKEN_STRING_INITIALIZER(struct pcmd_int_params, cmd, "rxmode");
cmdline_parse_token_string_t pcmd_portstats_token_cmd =
TOKEN_STRING_INITIALIZER(struct pcmd_int_params, cmd, "portstats");
cmdline_parse_token_num_t pcmd_int_token_port =
@@ -133,6 +149,31 @@ cmdline_parse_token_string_t pcmd_vlan_token_mode =
cmdline_parse_token_num_t pcmd_vlan_token_vid =
TOKEN_NUM_INITIALIZER(struct pcmd_vlan_params, vid, RTE_UINT16);
+/* rxmode */
+cmdline_parse_token_string_t cmd_set_vf_rxmode_set =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_vf_rxmode,
+ set, "set");
+cmdline_parse_token_string_t cmd_set_vf_rxmode_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_vf_rxmode,
+ port, "port");
+cmdline_parse_token_num_t cmd_set_vf_rxmode_portid =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_vf_rxmode,
+ port_id, RTE_UINT16);
+cmdline_parse_token_string_t cmd_set_vf_rxmode_vf =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_vf_rxmode,
+ vf, "vf");
+cmdline_parse_token_num_t cmd_set_vf_rxmode_vfid =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_vf_rxmode,
+ vf_id, RTE_UINT8);
+cmdline_parse_token_string_t cmd_set_vf_rxmode_what =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_vf_rxmode,
+ what, "rxmode");
+cmdline_parse_token_string_t cmd_set_vf_rxmode_mode =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_vf_rxmode,
+ mode, "AUPE#ROPE#BAM#MPE");
+cmdline_parse_token_string_t cmd_set_vf_rxmode_on =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_vf_rxmode,
+ on, "on#off");
static void
pcmd_quit_callback(__rte_unused void *ptr_params,
@@ -142,7 +183,6 @@ pcmd_quit_callback(__rte_unused void *ptr_params,
cmdline_quit(ctx);
}
-
static void
pcmd_drvinfo_callback(__rte_unused void *ptr_params,
__rte_unused struct cmdline *ctx,
@@ -150,7 +190,6 @@ pcmd_drvinfo_callback(__rte_unused void *ptr_params,
{
struct ethtool_drvinfo info;
uint16_t id_port;
-
RTE_ETH_FOREACH_DEV(id_port) {
memset(&info, 0, sizeof(info));
if (rte_ethtool_get_drvinfo(id_port, &info)) {
@@ -447,26 +486,57 @@ pcmd_stop_callback(__rte_unused void *ptr_params,
printf("Port %i: Error stopping device\n", params->port);
}
-
static void
-pcmd_rxmode_callback(void *ptr_params,
- __rte_unused struct cmdline *ctx,
- __rte_unused void *ptr_data)
+pcmd_rxmode_callback(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
{
- struct pcmd_intstr_params *params = ptr_params;
- int stat;
+ int ret = -ENOTSUP;
+ uint16_t vf_rxmode = 0;
+ struct cmd_set_vf_rxmode *res = parsed_result;
+
+ int is_on = (strcmp(res->on, "on") == 0) ? 1 : 0;
+ if (!strcmp(res->what, "rxmode")) {
+ if (!strcmp(res->mode, "AUPE"))
+ vf_rxmode |= RTE_ETH_VMDQ_ACCEPT_UNTAG;
+ else if (!strcmp(res->mode, "ROPE"))
+ vf_rxmode |= RTE_ETH_VMDQ_ACCEPT_HASH_UC;
+ else if (!strcmp(res->mode, "BAM"))
+ vf_rxmode |= RTE_ETH_VMDQ_ACCEPT_BROADCAST;
+ else if (!strncmp(res->mode, "MPE", 3))
+ vf_rxmode |= RTE_ETH_VMDQ_ACCEPT_MULTICAST;
+ }
- if (!rte_eth_dev_is_valid_port(params->port)) {
- printf("Error: Invalid port number %i\n", params->port);
- return;
+ RTE_SET_USED(is_on);
+ RTE_SET_USED(vf_rxmode);
+
+#ifdef RTE_NET_IXGBE
+ if (ret == -ENOTSUP) {
+ ret = rte_pmd_ixgbe_set_vf_rxmode(res->port_id, res->vf_id,
+ vf_rxmode, (uint8_t)is_on);
+ if (ret == -ENOTSUP)
+ printf("ixgbe not supported\n");
}
- stat = rte_ethtool_net_set_rx_mode(params->port);
- if (stat == 0)
- return;
- else if (stat == -ENOTSUP)
- printf("Port %i: Operation not supported\n", params->port);
- else
- printf("Port %i: Error setting rx mode\n", params->port);
+#endif
+#ifdef RTE_NET_BNXT
+ if (ret == -ENOTSUP) {
+ ret = rte_pmd_bnxt_set_vf_rxmode(res->port_id, res->vf_id,
+ vf_rxmode, (uint8_t)is_on);
+ if (ret == -ENOTSUP)
+ printf("bnxt not supported\n");
+ }
+#endif
+ int ret_offload = -ENOTSUP;
+ if (!strcmp(res->mode, "AUPE")) {
+ ret_offload = rte_eth_dev_set_vlan_offload(res->port_id, RTE_ETH_VLAN_FILTER_MASK);
+ if (ret_offload == -ENOTSUP)
+ printf("Port %i: VLAN Filter setting mask not supported\n", res->port_id);
+ }
+ if (ret < 0)
+ fprintf(stderr,
+ "bad VF receive mode parameter, return code = %d\n", ret);
+ else if (ret == 0)
+ printf("Successful\n");
}
@@ -763,16 +833,25 @@ cmdline_parse_inst_t pcmd_stop = {
NULL
},
};
-cmdline_parse_inst_t pcmd_rxmode = {
+
+cmdline_parse_inst_t cmd_set_vf_rxmode = {
.f = pcmd_rxmode_callback,
.data = NULL,
- .help_str = "rxmode <port_id>\n Toggle port Rx mode",
+ .help_str = "set port <port_id> vf <vf_id> rxmode "
+ "AUPE|ROPE|BAM|MPE on|off",
.tokens = {
- (void *)&pcmd_rxmode_token_cmd,
- (void *)&pcmd_int_token_port,
- NULL
+ (void *)&cmd_set_vf_rxmode_set,
+ (void *)&cmd_set_vf_rxmode_port,
+ (void *)&cmd_set_vf_rxmode_portid,
+ (void *)&cmd_set_vf_rxmode_vf,
+ (void *)&cmd_set_vf_rxmode_vfid,
+ (void *)&cmd_set_vf_rxmode_what,
+ (void *)&cmd_set_vf_rxmode_mode,
+ (void *)&cmd_set_vf_rxmode_on,
+ NULL,
},
};
+
cmdline_parse_inst_t pcmd_macaddr_get = {
.f = pcmd_macaddr_callback,
.data = NULL,
@@ -869,7 +948,6 @@ cmdline_parse_inst_t pcmd_vlan = {
},
};
-
cmdline_parse_ctx_t list_prompt_commands[] = {
(cmdline_parse_inst_t *)&pcmd_drvinfo,
(cmdline_parse_inst_t *)&pcmd_eeprom,
@@ -885,7 +963,7 @@ cmdline_parse_ctx_t list_prompt_commands[] = {
(cmdline_parse_inst_t *)&pcmd_regs,
(cmdline_parse_inst_t *)&pcmd_ringparam,
(cmdline_parse_inst_t *)&pcmd_ringparam_set,
- (cmdline_parse_inst_t *)&pcmd_rxmode,
+ (cmdline_parse_inst_t *)&cmd_set_vf_rxmode,
(cmdline_parse_inst_t *)&pcmd_stop,
(cmdline_parse_inst_t *)&pcmd_validate,
(cmdline_parse_inst_t *)&pcmd_vlan,
diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c
index ffaad96498..6951f0c2a8 100644
--- a/examples/ethtool/lib/rte_ethtool.c
+++ b/examples/ethtool/lib/rte_ethtool.c
@@ -373,44 +373,6 @@ rte_ethtool_net_vlan_rx_kill_vid(uint16_t port_id, uint16_t vid)
return rte_eth_dev_vlan_filter(port_id, vid, 0);
}
-/*
- * The set_rx_mode provides driver-specific rx mode setting.
- * This implementation implements rx mode setting based upon
- * ixgbe/igb drivers. Further improvement is to provide a
- * callback op field over struct rte_eth_dev::dev_ops so each
- * driver can register device-specific implementation
- */
-int
-rte_ethtool_net_set_rx_mode(uint16_t port_id)
-{
- uint16_t num_vfs;
- struct rte_eth_dev_info dev_info;
- uint16_t vf;
- int ret;
-
- ret = rte_eth_dev_info_get(port_id, &dev_info);
- if (ret != 0)
- return ret;
-
- num_vfs = dev_info.max_vfs;
-
- /* Set VF vf_rx_mode, VF unsupport status is discard */
- for (vf = 0; vf < num_vfs; vf++) {
-#ifdef RTE_NET_IXGBE
- rte_pmd_ixgbe_set_vf_rxmode(port_id, vf,
- RTE_ETH_VMDQ_ACCEPT_UNTAG, 0);
-#endif
- }
-
- /* Enable Rx vlan filter, VF unsupported status is discard */
- ret = rte_eth_dev_set_vlan_offload(port_id, RTE_ETH_VLAN_FILTER_MASK);
- if (ret != 0)
- return ret;
-
- return 0;
-}
-
-
int
rte_ethtool_get_ringparam(uint16_t port_id,
struct ethtool_ringparam *ring_param)
diff --git a/examples/ethtool/meson.build b/examples/ethtool/meson.build
index d7f63d48af..175a5ddd7a 100644
--- a/examples/ethtool/meson.build
+++ b/examples/ethtool/meson.build
@@ -22,5 +22,7 @@ deps += 'bus_pci'
if dpdk_conf.has('RTE_NET_IXGBE')
deps += 'net_ixgbe'
endif
-
+if dpdk_conf.has('RTE_NET_BNXT')
+ deps += 'net_bnxt'
+endif
allow_experimental_apis = true
--
2.32.0
next reply other threads:[~2022-05-29 14:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-29 14:28 Muhammad Jawad Hussain [this message]
2022-07-06 7:16 ` Muhammad Jawad Hussain
-- strict thread matches above, loose matches on Subject: below --
2022-05-25 6:12 [PATCH] " Muhammad Jawad Hussain
2022-08-11 12:58 ` [PATCH v2] " Muhammad Jawad Hussain
2023-07-03 22:19 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220529142850.76501-1-jawad.hussain@emumba.com \
--to=jawad.hussain@emumba.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).