[PATCH v4 2/7] net/ark: update MPU functions for firmware update

[Ed Czeck <ed.czeck@atomicrules.com>]

new firmware version for MPU (Mbuf Prefetch Unit)
remove device-level global operations
remove ark_mpu_reset_stats function

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>

---
v2:
- document version compatibility between firmware and DPDK
- reword commit message
v4:
- clarify version compatibility note
- firmware change requirement added to release notes
---
 doc/guides/nics/ark.rst                | 19 +++++++++++++++++
 doc/guides/rel_notes/release_22_07.rst |  3 +++
 drivers/net/ark/ark_ethdev.c           |  2 --
 drivers/net/ark/ark_ethdev_rx.c        |  4 ----
 drivers/net/ark/ark_mpu.c              | 21 ++++---------------
 drivers/net/ark/ark_mpu.h              | 29 ++------------------------
 6 files changed, 28 insertions(+), 50 deletions(-)

diff --git a/doc/guides/nics/ark.rst b/doc/guides/nics/ark.rst
index 60b61e08e8..d8acb36d74 100644
--- a/doc/guides/nics/ark.rst
+++ b/doc/guides/nics/ark.rst
@@ -300,6 +300,25 @@ ARK PMD supports the following Arkville RTL PCIe instances including:
 * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile]
 * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device]
 
+DPDK and Arkville Firmware Versioning
+-------------------------------------
+
+Arkville's firmware releases and its PMD have version dependencies which
+must be stepped together at certain releases. PMD code ensures the
+versions are compatible. The following lists shows where version
+compatible steps have occurred between DPDK releases and the corresponding
+Arkville releases.  Intermediate releases not listed below remain
+compatible, e.g., DPDK releases 21.05, 21.08, and 21.11 are all compatible
+with Arkville releases 21.05, 21.08 and 21.11. LTS versions of DPDK remain
+compatible with the corresponding Arkville version.  If other combinations
+are required, please contact Atomic Rules support.
+
+* DPDK 22.07 requires Arkville 22.07.
+* DPDK 22.03 requires Arkville 22.03.
+* DPDK 21.05 requires Arkville 21.05.
+* DPDK 18.11 requires Arkville 18.11.
+* DPDK 17.05 requires Arkville 17.05 -- initial version.
+
 Supported Operating Systems
 ---------------------------
 
diff --git a/doc/guides/rel_notes/release_22_07.rst b/doc/guides/rel_notes/release_22_07.rst
index d46f773df0..aca946cea6 100644
--- a/doc/guides/rel_notes/release_22_07.rst
+++ b/doc/guides/rel_notes/release_22_07.rst
@@ -170,6 +170,9 @@ New Features
   This is a fall-back implementation for platforms that
   don't support vector operations.
 
+* **Updated Atomic Rules' Arkville PMD.**
+
+  A firmware version update to Arkville 22.07 is required.
 
 Removed Items
 -------------
diff --git a/drivers/net/ark/ark_ethdev.c b/drivers/net/ark/ark_ethdev.c
index 76b88c62d0..c0578b85ce 100644
--- a/drivers/net/ark/ark_ethdev.c
+++ b/drivers/net/ark/ark_ethdev.c
@@ -524,7 +524,6 @@ ark_config_device(struct rte_eth_dev *dev)
 	num_q = ark_api_num_queues(mpu);
 	ark->rx_queues = num_q;
 	for (i = 0; i < num_q; i++) {
-		ark_mpu_reset(mpu);
 		mpu = RTE_PTR_ADD(mpu, ARK_MPU_QOFFSET);
 	}
 
@@ -536,7 +535,6 @@ ark_config_device(struct rte_eth_dev *dev)
 	num_q = ark_api_num_queues(mpu);
 	ark->tx_queues = num_q;
 	for (i = 0; i < num_q; i++) {
-		ark_mpu_reset(mpu);
 		mpu = RTE_PTR_ADD(mpu, ARK_MPU_QOFFSET);
 	}
 
diff --git a/drivers/net/ark/ark_ethdev_rx.c b/drivers/net/ark/ark_ethdev_rx.c
index 0fbb2603db..85e34d0bb8 100644
--- a/drivers/net/ark/ark_ethdev_rx.c
+++ b/drivers/net/ark/ark_ethdev_rx.c
@@ -91,9 +91,6 @@ eth_ark_rx_hw_setup(struct rte_eth_dev *dev,
 
 	ark_udm_write_addr(queue->udm, phys_addr_prod_index);
 
-	/* advance the valid pointer, but don't start until the queue starts */
-	ark_mpu_reset_stats(queue->mpu);
-
 	/* The seed is the producer index for the HW */
 	ark_mpu_set_producer(queue->mpu, queue->seed_index);
 	dev->data->rx_queue_state[rx_queue_idx] = RTE_ETH_QUEUE_STATE_STOPPED;
@@ -589,7 +586,6 @@ eth_rx_queue_stats_reset(void *vqueue)
 	if (queue == 0)
 		return;
 
-	ark_mpu_reset_stats(queue->mpu);
 	ark_udm_queue_stats_reset(queue->udm);
 }
 
diff --git a/drivers/net/ark/ark_mpu.c b/drivers/net/ark/ark_mpu.c
index b8e94b6ed3..9d5ee7841b 100644
--- a/drivers/net/ark/ark_mpu.c
+++ b/drivers/net/ark/ark_mpu.c
@@ -24,10 +24,10 @@ ark_mpu_verify(struct ark_mpu_t *mpu, uint32_t obj_size)
 {
 	uint32_t version;
 
-	version = mpu->id.vernum & 0x0000fF00;
-	if ((mpu->id.idnum != 0x2055504d) ||
-	    (mpu->hw.obj_size != obj_size) ||
-	    (version != 0x00003100)) {
+	version = mpu->id.vernum;
+	if (mpu->id.idnum != ARK_MPU_MODID ||
+	    version != ARK_MPU_MODVER ||
+	    mpu->hw.obj_size != obj_size) {
 		ARK_PMD_LOG(ERR,
 			    "   MPU module not found as expected %08x"
 			    " \"%c%c%c%c %c%c%c%c\"\n",
@@ -79,16 +79,9 @@ ark_mpu_reset(struct ark_mpu_t *mpu)
 		mpu->cfg.command = MPU_CMD_FORCE_RESET;
 		usleep(10);
 	}
-	ark_mpu_reset_stats(mpu);
 	return mpu->cfg.command != MPU_CMD_IDLE;
 }
 
-void
-ark_mpu_reset_stats(struct ark_mpu_t *mpu)
-{
-	mpu->stats.pci_request = 1;	/* reset stats */
-}
-
 int
 ark_mpu_configure(struct ark_mpu_t *mpu, rte_iova_t ring, uint32_t ring_size,
 		  int is_tx)
@@ -118,12 +111,6 @@ ark_mpu_dump(struct ark_mpu_t *mpu, const char *code, uint16_t qid)
 	ARK_PMD_LOG(DEBUG, "MPU: %s Q: %3u sw_prod %u, hw_cons: %u\n",
 		      code, qid,
 		      mpu->cfg.sw_prod_index, mpu->cfg.hw_cons_index);
-	ARK_PMD_LOG(DEBUG, "MPU: %s state: %d count %d, reserved %d"
-		      "\n",
-		      code,
-		      mpu->debug.state, mpu->debug.count,
-		      mpu->debug.reserved
-		      );
 }
 
 void
diff --git a/drivers/net/ark/ark_mpu.h b/drivers/net/ark/ark_mpu.h
index 92c3e67c86..9d2b70d35f 100644
--- a/drivers/net/ark/ark_mpu.h
+++ b/drivers/net/ark/ark_mpu.h
@@ -15,6 +15,8 @@
  * there is minimal documentation.
  */
 
+#define ARK_MPU_MODID 0x2055504d
+#define ARK_MPU_MODVER 0x37313232
 /*
  * MPU hardware structures
  * These are overlay structures to a memory mapped FPGA device.  These
@@ -64,26 +66,6 @@ enum ARK_MPU_COMMAND {
 	MPU_COMMAND_LIMIT = 0xfFFFFFFF
 };
 
-#define ARK_MPU_STATS 0x080
-struct ark_mpu_stats_t {
-	volatile uint64_t pci_request;
-	volatile uint64_t q_empty;
-	volatile uint64_t q_q1;
-	volatile uint64_t q_q2;
-	volatile uint64_t q_q3;
-	volatile uint64_t q_q4;
-	volatile uint64_t q_full;
-};
-
-#define ARK_MPU_DEBUG 0x0C0
-struct ark_mpu_debug_t {
-	volatile uint32_t state;
-	uint32_t reserved;
-	volatile uint32_t count;
-	volatile uint32_t take;
-	volatile uint32_t peek[4];
-};
-
 /*  Consolidated structure */
 struct ark_mpu_t {
 	struct ark_mpu_id_t id;
@@ -93,12 +75,6 @@ struct ark_mpu_t {
 	uint8_t reserved1[(ARK_MPU_CFG - ARK_MPU_HW) -
 			  sizeof(struct ark_mpu_hw_t)];
 	struct ark_mpu_cfg_t cfg;
-	uint8_t reserved2[(ARK_MPU_STATS - ARK_MPU_CFG) -
-			  sizeof(struct ark_mpu_cfg_t)];
-	struct ark_mpu_stats_t stats;
-	uint8_t reserved3[(ARK_MPU_DEBUG - ARK_MPU_STATS) -
-			  sizeof(struct ark_mpu_stats_t)];
-	struct ark_mpu_debug_t debug;
 };
 
 uint16_t ark_api_num_queues(struct ark_mpu_t *mpu);
@@ -113,7 +89,6 @@ int ark_mpu_configure(struct ark_mpu_t *mpu, rte_iova_t ring,
 
 void ark_mpu_dump(struct ark_mpu_t *mpu, const char *msg, uint16_t idx);
 void ark_mpu_dump_setup(struct ark_mpu_t *mpu, uint16_t qid);
-void ark_mpu_reset_stats(struct ark_mpu_t *mpu);
 
 /*  this action is in a performance critical path */
 static inline void
-- 
2.25.1