[PATCH v4 00/24] Support LoongArch architecture

[PATCH v4 00/24] Support LoongArch architecture

[Min Zhou]

Dear team,
The following patch set is intended to support DPDK running on LoongArch
architecture.

LoongArch is the general processor architecture of Loongson and is a new
RISC ISA, which is a bit like MIPS or RISC-V.

The online documents of LoongArch are here:
    https://loongson.github.io/LoongArch-Documentation/README-EN.html

The latest cross compile tool chain can be downloaded from:
    https://github.com/loongson/build-tools

v4:
    - rebase the patchset on the main repository of version 22.07.0

v3:
    - add URL for cross compile tool chain
    - remove rte_lpm_lsx.h which was a dummy vector implementation
      because there is already a scalar implementation, thanks to
      Michal Mazurek
    - modify the name of compiler for cross compiling
    - remove useless variable in meson.build

v2:
    - use standard atomics of toolchain to implement
      atomic operations
    - implement spinlock based on standard atomics

Min Zhou (24):
  eal/loongarch: add atomic operations for LoongArch
  eal/loongarch: add byte order operations for LoongArch
  eal/loongarch: add cpu cycle operations for LoongArch
  eal/loongarch: add prefetch operations for LoongArch
  eal/loongarch: add spinlock operations for LoongArch
  eal/loongarch: add cpu flag checks for LoongArch
  eal/loongarch: add dummy vector memcpy for LoongArch
  eal/loongarch: add io operations for LoongArch
  eal/loongarch: add mcslock operations for LoongArch
  eal/loongarch: add pause operations for LoongArch
  eal/loongarch: add pflock operations for LoongArch
  eal/loongarch: add rwlock operations for LoongArch
  eal/loongarch: add ticketlock operations for LoongArch
  eal/loongarch: add power operations for LoongArch
  eal/loongarch: add hypervisor operations for LoongArch
  mem: add huge page size definition for LoongArch
  eal/linux: set eal base address for LoongArch
  meson: introduce LoongArch architecture
  test/xmmt_ops: add dummy vector implementation for LoongArch
  ixgbe: add dummy vector implementation for LoongArch
  i40e: add dummy vector implementation for LoongArch
  tap: add system call number for LoongArch
  memif: add system call number for LoongArch
  maintainers: claim responsibility for LoongArch

 MAINTAINERS                                   |   9 +
 app/test/test_xmmt_ops.h                      |  17 ++
 .../loongarch/loongarch_loongarch64_linux_gcc |  16 ++
 config/loongarch/meson.build                  |  43 +++
 drivers/net/i40e/i40e_rxtx_vec_lsx.c          |  54 ++++
 drivers/net/i40e/meson.build                  |   2 +
 drivers/net/ixgbe/ixgbe_rxtx_vec_lsx.c        |  60 +++++
 drivers/net/ixgbe/meson.build                 |   2 +
 drivers/net/memif/rte_eth_memif.h             |   2 +-
 drivers/net/tap/tap_bpf.h                     |   2 +-
 lib/eal/include/rte_memory.h                  |   1 +
 lib/eal/include/rte_memzone.h                 |   1 +
 lib/eal/linux/eal_memory.c                    |   4 +
 lib/eal/loongarch/include/meson.build         |  21 ++
 lib/eal/loongarch/include/rte_atomic.h        | 253 ++++++++++++++++++
 lib/eal/loongarch/include/rte_byteorder.h     |  46 ++++
 lib/eal/loongarch/include/rte_cpuflags.h      |  39 +++
 lib/eal/loongarch/include/rte_cycles.h        |  53 ++++
 lib/eal/loongarch/include/rte_io.h            |  18 ++
 lib/eal/loongarch/include/rte_mcslock.h       |  18 ++
 lib/eal/loongarch/include/rte_memcpy.h        | 193 +++++++++++++
 lib/eal/loongarch/include/rte_pause.h         |  24 ++
 lib/eal/loongarch/include/rte_pflock.h        |  17 ++
 .../loongarch/include/rte_power_intrinsics.h  |  20 ++
 lib/eal/loongarch/include/rte_prefetch.h      |  47 ++++
 lib/eal/loongarch/include/rte_rwlock.h        |  42 +++
 lib/eal/loongarch/include/rte_spinlock.h      |  90 +++++++
 lib/eal/loongarch/include/rte_ticketlock.h    |  18 ++
 lib/eal/loongarch/include/rte_vect.h          |  46 ++++
 lib/eal/loongarch/meson.build                 |  11 +
 lib/eal/loongarch/rte_cpuflags.c              |  94 +++++++
 lib/eal/loongarch/rte_cycles.c                |  45 ++++
 lib/eal/loongarch/rte_hypervisor.c            |  11 +
 lib/eal/loongarch/rte_power_intrinsics.c      |  51 ++++
 meson.build                                   |   2 +
 35 files changed, 1370 insertions(+), 2 deletions(-)
 create mode 100644 config/loongarch/loongarch_loongarch64_linux_gcc
 create mode 100644 config/loongarch/meson.build
 create mode 100644 drivers/net/i40e/i40e_rxtx_vec_lsx.c
 create mode 100644 drivers/net/ixgbe/ixgbe_rxtx_vec_lsx.c
 create mode 100644 lib/eal/loongarch/include/meson.build
 create mode 100644 lib/eal/loongarch/include/rte_atomic.h
 create mode 100644 lib/eal/loongarch/include/rte_byteorder.h
 create mode 100644 lib/eal/loongarch/include/rte_cpuflags.h
 create mode 100644 lib/eal/loongarch/include/rte_cycles.h
 create mode 100644 lib/eal/loongarch/include/rte_io.h
 create mode 100644 lib/eal/loongarch/include/rte_mcslock.h
 create mode 100644 lib/eal/loongarch/include/rte_memcpy.h
 create mode 100644 lib/eal/loongarch/include/rte_pause.h
 create mode 100644 lib/eal/loongarch/include/rte_pflock.h
 create mode 100644 lib/eal/loongarch/include/rte_power_intrinsics.h
 create mode 100644 lib/eal/loongarch/include/rte_prefetch.h
 create mode 100644 lib/eal/loongarch/include/rte_rwlock.h
 create mode 100644 lib/eal/loongarch/include/rte_spinlock.h
 create mode 100644 lib/eal/loongarch/include/rte_ticketlock.h
 create mode 100644 lib/eal/loongarch/include/rte_vect.h
 create mode 100644 lib/eal/loongarch/meson.build
 create mode 100644 lib/eal/loongarch/rte_cpuflags.c
 create mode 100644 lib/eal/loongarch/rte_cycles.c
 create mode 100644 lib/eal/loongarch/rte_hypervisor.c
 create mode 100644 lib/eal/loongarch/rte_power_intrinsics.c

-- 
2.31.1

[PATCH v4 01/24] eal/loongarch: add atomic operations for LoongArch

[Min Zhou]

This patch adds architecture specific atomic operations for
LoongArch architecture. These implementations use standard atomics
of toolchain and heavily reference generic atomics codes.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_atomic.h | 253 +++++++++++++++++++++++++
 1 file changed, 253 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_atomic.h

diff --git a/lib/eal/loongarch/include/rte_atomic.h b/lib/eal/loongarch/include/rte_atomic.h
new file mode 100644
index 0000000000..8e007e7f76
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_atomic.h
@@ -0,0 +1,253 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_ATOMIC_LOONGARCH_H_
+#define _RTE_ATOMIC_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include "generic/rte_atomic.h"
+
+/**
+ * LoongArch Synchronize
+ */
+static inline void synchronize(void)
+{
+	__asm__ __volatile__("dbar 0":::"memory");
+}
+
+/**
+ * General memory barrier.
+ *
+ * Guarantees that the LOAD and STORE operations generated before the
+ * barrier occur before the LOAD and STORE operations generated after.
+ * This function is architecture dependent.
+ */
+#define rte_mb() synchronize()
+
+/**
+ * Write memory barrier.
+ *
+ * Guarantees that the STORE operations generated before the barrier
+ * occur before the STORE operations generated after.
+ * This function is architecture dependent.
+ */
+#define rte_wmb() synchronize()
+
+/**
+ * Read memory barrier.
+ *
+ * Guarantees that the LOAD operations generated before the barrier
+ * occur before the LOAD operations generated after.
+ * This function is architecture dependent.
+ */
+#define rte_rmb() synchronize()
+
+#define rte_smp_mb() rte_mb()
+
+#define rte_smp_wmb() rte_mb()
+
+#define rte_smp_rmb() rte_mb()
+
+#define rte_io_mb() rte_mb()
+
+#define rte_io_wmb() rte_mb()
+
+#define rte_io_rmb() rte_mb()
+
+static __rte_always_inline void
+rte_atomic_thread_fence(int memorder)
+{
+	__atomic_thread_fence(memorder);
+}
+
+#ifndef RTE_FORCE_INTRINSICS
+/*------------------------- 16 bit atomic operations -------------------------*/
+static inline int
+rte_atomic16_cmpset(volatile uint16_t *dst, uint16_t exp, uint16_t src)
+{
+	return __sync_bool_compare_and_swap(dst, exp, src);
+}
+
+static inline uint16_t
+rte_atomic16_exchange(volatile uint16_t *dst, uint16_t val)
+{
+#if defined(__clang__)
+	return __atomic_exchange_n(dst, val, __ATOMIC_SEQ_CST);
+#else
+	return __atomic_exchange_2(dst, val, __ATOMIC_SEQ_CST);
+#endif
+}
+
+static inline void
+rte_atomic16_inc(rte_atomic16_t *v)
+{
+	rte_atomic16_add(v, 1);
+}
+
+static inline void
+rte_atomic16_dec(rte_atomic16_t *v)
+{
+	rte_atomic16_sub(v, 1);
+}
+
+static inline int rte_atomic16_inc_and_test(rte_atomic16_t *v)
+{
+	return __sync_add_and_fetch(&v->cnt, 1) == 0;
+}
+
+static inline int rte_atomic16_dec_and_test(rte_atomic16_t *v)
+{
+	return __sync_sub_and_fetch(&v->cnt, 1) == 0;
+}
+
+static inline int rte_atomic16_test_and_set(rte_atomic16_t *v)
+{
+	return rte_atomic16_cmpset((volatile uint16_t *)&v->cnt, 0, 1);
+}
+
+/*------------------------- 32 bit atomic operations -------------------------*/
+static inline int
+rte_atomic32_cmpset(volatile uint32_t *dst, uint32_t exp, uint32_t src)
+{
+	return __sync_bool_compare_and_swap(dst, exp, src);
+}
+
+static inline uint32_t
+rte_atomic32_exchange(volatile uint32_t *dst, uint32_t val)
+{
+#if defined(__clang__)
+	return __atomic_exchange_n(dst, val, __ATOMIC_SEQ_CST);
+#else
+	return __atomic_exchange_4(dst, val, __ATOMIC_SEQ_CST);
+#endif
+}
+
+static inline void
+rte_atomic32_inc(rte_atomic32_t *v)
+{
+	rte_atomic32_add(v, 1);
+}
+
+static inline void
+rte_atomic32_dec(rte_atomic32_t *v)
+{
+	rte_atomic32_sub(v, 1);
+}
+
+static inline int rte_atomic32_inc_and_test(rte_atomic32_t *v)
+{
+	return __sync_add_and_fetch(&v->cnt, 1) == 0;
+}
+
+static inline int rte_atomic32_dec_and_test(rte_atomic32_t *v)
+{
+	return __sync_sub_and_fetch(&v->cnt, 1) == 0;
+}
+
+static inline int rte_atomic32_test_and_set(rte_atomic32_t *v)
+{
+	return rte_atomic32_cmpset((volatile uint32_t *)&v->cnt, 0, 1);
+}
+
+/*------------------------- 64 bit atomic operations -------------------------*/
+static inline int
+rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
+{
+	return __sync_bool_compare_and_swap(dst, exp, src);
+}
+
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dst, uint64_t val)
+{
+#if defined(__clang__)
+	return __atomic_exchange_n(dst, val, __ATOMIC_SEQ_CST);
+#else
+	return __atomic_exchange_8(dst, val, __ATOMIC_SEQ_CST);
+#endif
+}
+
+static inline void
+rte_atomic64_init(rte_atomic64_t *v)
+{
+	v->cnt = 0;
+}
+
+static inline int64_t
+rte_atomic64_read(rte_atomic64_t *v)
+{
+	return v->cnt;
+}
+
+static inline void
+rte_atomic64_set(rte_atomic64_t *v, int64_t new_value)
+{
+	v->cnt = new_value;
+}
+
+static inline void
+rte_atomic64_add(rte_atomic64_t *v, int64_t inc)
+{
+	__sync_fetch_and_add(&v->cnt, inc);
+}
+
+static inline void
+rte_atomic64_sub(rte_atomic64_t *v, int64_t dec)
+{
+	__sync_fetch_and_sub(&v->cnt, dec);
+}
+
+static inline void
+rte_atomic64_inc(rte_atomic64_t *v)
+{
+	rte_atomic64_add(v, 1);
+}
+
+static inline void
+rte_atomic64_dec(rte_atomic64_t *v)
+{
+	rte_atomic64_sub(v, 1);
+}
+
+static inline int64_t
+rte_atomic64_add_return(rte_atomic64_t *v, int64_t inc)
+{
+	return __sync_add_and_fetch(&v->cnt, inc);
+}
+
+static inline int64_t
+rte_atomic64_sub_return(rte_atomic64_t *v, int64_t dec)
+{
+	return __sync_sub_and_fetch(&v->cnt, dec);
+}
+
+static inline int rte_atomic64_inc_and_test(rte_atomic64_t *v)
+{
+	return rte_atomic64_add_return(v, 1) == 0;
+}
+
+static inline int rte_atomic64_dec_and_test(rte_atomic64_t *v)
+{
+	return rte_atomic64_sub_return(v, 1) == 0;
+}
+
+static inline int rte_atomic64_test_and_set(rte_atomic64_t *v)
+{
+	return rte_atomic64_cmpset((volatile uint64_t *)&v->cnt, 0, 1);
+}
+
+static inline void rte_atomic64_clear(rte_atomic64_t *v)
+{
+	rte_atomic64_set(v, 0);
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ATOMIC_LOONGARCH_H_ */
-- 
2.31.1

[PATCH v4 02/24] eal/loongarch: add byte order operations for LoongArch

[Min Zhou]

This patch adds architecture specific byte order operations
for LoongArch architecture. LoongArch bit designations are
always little-endian.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_byteorder.h | 46 +++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_byteorder.h

diff --git a/lib/eal/loongarch/include/rte_byteorder.h b/lib/eal/loongarch/include/rte_byteorder.h
new file mode 100644
index 0000000000..2cda010256
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_byteorder.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_BYTEORDER_LOONGARCH_H_
+#define _RTE_BYTEORDER_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_byteorder.h"
+
+#ifndef RTE_FORCE_INTRINSICS
+#define rte_bswap16(x) rte_constant_bswap16(x)
+#define rte_bswap32(x) rte_constant_bswap32(x)
+#define rte_bswap64(x) rte_constant_bswap64(x)
+#endif
+
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+
+#define rte_cpu_to_le_16(x) (x)
+#define rte_cpu_to_le_32(x) (x)
+#define rte_cpu_to_le_64(x) (x)
+
+#define rte_cpu_to_be_16(x) rte_bswap16(x)
+#define rte_cpu_to_be_32(x) rte_bswap32(x)
+#define rte_cpu_to_be_64(x) rte_bswap64(x)
+
+#define rte_le_to_cpu_16(x) (x)
+#define rte_le_to_cpu_32(x) (x)
+#define rte_le_to_cpu_64(x) (x)
+
+#define rte_be_to_cpu_16(x) rte_bswap16(x)
+#define rte_be_to_cpu_32(x) rte_bswap32(x)
+#define rte_be_to_cpu_64(x) rte_bswap64(x)
+
+#else /* RTE_BIG_ENDIAN */
+#error "LoongArch not support big endian!"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BYTEORDER_LOONGARCH_H_ */
-- 
2.31.1

[PATCH v4 03/24] eal/loongarch: add cpu cycle operations for LoongArch

[Min Zhou]

This patch adds architecture specific cpu cycle operations for
LoongArch. The RDTIME.D instruction is used to read constant
frequency timer information including counter value. The CPUCFG
instruction is used to dynamically identify which features of
LoongArch are implemented in the running processor during the
execution of the software. We can use this instruction to calculate
the frequency used by the timer.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_cycles.h | 53 ++++++++++++++++++++++++++
 lib/eal/loongarch/rte_cycles.c         | 45 ++++++++++++++++++++++
 2 files changed, 98 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_cycles.h
 create mode 100644 lib/eal/loongarch/rte_cycles.c

diff --git a/lib/eal/loongarch/include/rte_cycles.h b/lib/eal/loongarch/include/rte_cycles.h
new file mode 100644
index 0000000000..1f8f957faf
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_cycles.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_CYCLES_LOONGARCH_H_
+#define _RTE_CYCLES_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_cycles.h"
+
+static inline uint64_t
+get_cycle_count(void)
+{
+	uint64_t count;
+
+	__asm__ __volatile__ (
+		"rdtime.d %[cycles], $zero\n"
+		: [cycles] "=r" (count)
+		::
+		);
+	return count;
+}
+
+/**
+ * Read the time base register.
+ *
+ * @return
+ *   The time base for this lcore.
+ */
+static inline uint64_t
+rte_rdtsc(void)
+{
+	return get_cycle_count();
+}
+
+static inline uint64_t
+rte_rdtsc_precise(void)
+{
+	rte_mb();
+	return rte_rdtsc();
+}
+
+static inline uint64_t
+rte_get_tsc_cycles(void) { return rte_rdtsc(); }
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_CYCLES_LOONGARCH_H_ */
diff --git a/lib/eal/loongarch/rte_cycles.c b/lib/eal/loongarch/rte_cycles.c
new file mode 100644
index 0000000000..582601d335
--- /dev/null
+++ b/lib/eal/loongarch/rte_cycles.c
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#include "eal_private.h"
+
+#define LOONGARCH_CPUCFG4	0x4
+#define CPUCFG4_CCFREQ_MASK	0xFFFFFFFF
+#define CPUCFG4_CCFREQ_SHIFT	0
+
+#define LOONGARCH_CPUCFG5	0x5
+#define CPUCFG5_CCMUL_MASK	0xFFFF
+#define CPUCFG5_CCMUL_SHIFT	0
+
+#define CPUCFG5_CCDIV_MASK	0xFFFF0000
+#define CPUCFG5_CCDIV_SHIFT	16
+
+static __rte_noinline uint32_t
+read_cpucfg(int arg)
+{
+	int ret = 0;
+
+	__asm__ __volatile__ (
+		"cpucfg %[var], %[index]\n"
+		: [var]"=r"(ret)
+		: [index]"r"(arg)
+		:
+		);
+
+	return ret;
+}
+
+uint64_t
+get_tsc_freq_arch(void)
+{
+	uint32_t base_freq, mul_factor, div_factor;
+
+	base_freq = read_cpucfg(LOONGARCH_CPUCFG4);
+	mul_factor = (read_cpucfg(LOONGARCH_CPUCFG5) & CPUCFG5_CCMUL_MASK) >>
+		CPUCFG5_CCMUL_SHIFT;
+	div_factor = (read_cpucfg(LOONGARCH_CPUCFG5) & CPUCFG5_CCDIV_MASK) >>
+		CPUCFG5_CCDIV_SHIFT;
+
+	return base_freq * mul_factor / div_factor;
+}
-- 
2.31.1

[PATCH v4 04/24] eal/loongarch: add prefetch operations for LoongArch

[Min Zhou]

This patch adds architecture specific prefetch operations
for LoongArch architecture.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_prefetch.h | 47 ++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_prefetch.h

diff --git a/lib/eal/loongarch/include/rte_prefetch.h b/lib/eal/loongarch/include/rte_prefetch.h
new file mode 100644
index 0000000000..0fd9262ea8
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_prefetch.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_PREFETCH_LOONGARCH_H_
+#define _RTE_PREFETCH_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_common.h>
+#include "generic/rte_prefetch.h"
+
+static inline void rte_prefetch0(const volatile void *p)
+{
+	__builtin_prefetch((const void *)(uintptr_t)p, 0, 3);
+}
+
+static inline void rte_prefetch1(const volatile void *p)
+{
+	__builtin_prefetch((const void *)(uintptr_t)p, 0, 2);
+}
+
+static inline void rte_prefetch2(const volatile void *p)
+{
+	__builtin_prefetch((const void *)(uintptr_t)p, 0, 1);
+}
+
+static inline void rte_prefetch_non_temporal(const volatile void *p)
+{
+	/* non-temporal version not available, fallback to rte_prefetch0 */
+	rte_prefetch0(p);
+}
+
+__rte_experimental
+static inline void
+rte_cldemote(const volatile void *p)
+{
+	RTE_SET_USED(p);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_PREFETCH_LOONGARCH_H_ */
-- 
2.31.1

[PATCH v4 05/24] eal/loongarch: add spinlock operations for LoongArch

[Min Zhou]

This patch adds spinlock operations for LoongArch architecture.
These implementations are based on standard atomics of toolchain
and heavily reference generic spinlock codes.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_spinlock.h | 90 ++++++++++++++++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_spinlock.h

diff --git a/lib/eal/loongarch/include/rte_spinlock.h b/lib/eal/loongarch/include/rte_spinlock.h
new file mode 100644
index 0000000000..9ad46a3c91
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_spinlock.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_SPINLOCK_LOONGARCH_H_
+#define _RTE_SPINLOCK_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_common.h>
+#include "generic/rte_spinlock.h"
+
+#ifndef RTE_FORCE_INTRINSICS
+static inline void
+rte_spinlock_lock(rte_spinlock_t *sl)
+{
+	int exp = 0;
+
+	while (!__atomic_compare_exchange_n(&sl->locked, &exp, 1, 0,
+				__ATOMIC_ACQUIRE, __ATOMIC_RELAXED)) {
+		rte_wait_until_equal_32((volatile uint32_t *)&sl->locked,
+			       0, __ATOMIC_RELAXED);
+		exp = 0;
+	}
+}
+
+static inline void
+rte_spinlock_unlock(rte_spinlock_t *sl)
+{
+	__atomic_store_n(&sl->locked, 0, __ATOMIC_RELEASE);
+}
+
+static inline int
+rte_spinlock_trylock(rte_spinlock_t *sl)
+{
+	int exp = 0;
+	return __atomic_compare_exchange_n(&sl->locked, &exp, 1,
+				0, /* disallow spurious failure */
+				__ATOMIC_ACQUIRE, __ATOMIC_RELAXED);
+}
+#endif
+
+static inline int rte_tm_supported(void)
+{
+	return 0;
+}
+
+static inline void
+rte_spinlock_lock_tm(rte_spinlock_t *sl)
+{
+	rte_spinlock_lock(sl); /* fall-back */
+}
+
+static inline int
+rte_spinlock_trylock_tm(rte_spinlock_t *sl)
+{
+	return rte_spinlock_trylock(sl);
+}
+
+static inline void
+rte_spinlock_unlock_tm(rte_spinlock_t *sl)
+{
+	rte_spinlock_unlock(sl);
+}
+
+static inline void
+rte_spinlock_recursive_lock_tm(rte_spinlock_recursive_t *slr)
+{
+	rte_spinlock_recursive_lock(slr); /* fall-back */
+}
+
+static inline void
+rte_spinlock_recursive_unlock_tm(rte_spinlock_recursive_t *slr)
+{
+	rte_spinlock_recursive_unlock(slr);
+}
+
+static inline int
+rte_spinlock_recursive_trylock_tm(rte_spinlock_recursive_t *slr)
+{
+	return rte_spinlock_recursive_trylock(slr);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_SPINLOCK_LOONGARCH_H_ */
-- 
2.31.1

[PATCH v4 06/24] eal/loongarch: add cpu flag checks for LoongArch

[Min Zhou]

This patch uses aux vector software register to get CPU flags
and add CPU flag checking support for LoongArch architecture.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_cpuflags.h | 39 ++++++++++
 lib/eal/loongarch/rte_cpuflags.c         | 94 ++++++++++++++++++++++++
 2 files changed, 133 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_cpuflags.h
 create mode 100644 lib/eal/loongarch/rte_cpuflags.c

diff --git a/lib/eal/loongarch/include/rte_cpuflags.h b/lib/eal/loongarch/include/rte_cpuflags.h
new file mode 100644
index 0000000000..d9121a00a8
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_cpuflags.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_CPUFLAGS_LOONGARCH_H_
+#define _RTE_CPUFLAGS_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Enumeration of all CPU features supported
+ */
+enum rte_cpu_flag_t {
+	RTE_CPUFLAG_CPUCFG = 0,
+	RTE_CPUFLAG_LAM,
+	RTE_CPUFLAG_UAL,
+	RTE_CPUFLAG_FPU,
+	RTE_CPUFLAG_LSX,
+	RTE_CPUFLAG_LASX,
+	RTE_CPUFLAG_CRC32,
+	RTE_CPUFLAG_COMPLEX,
+	RTE_CPUFLAG_CRYPTO,
+	RTE_CPUFLAG_LVZ,
+	RTE_CPUFLAG_LBT_X86,
+	RTE_CPUFLAG_LBT_ARM,
+	RTE_CPUFLAG_LBT_MIPS,
+	/* The last item */
+	RTE_CPUFLAG_NUMFLAGS /**< This should always be the last! */
+};
+
+#include "generic/rte_cpuflags.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_CPUFLAGS_LOONGARCH_H_ */
diff --git a/lib/eal/loongarch/rte_cpuflags.c b/lib/eal/loongarch/rte_cpuflags.c
new file mode 100644
index 0000000000..4abcd0fdb3
--- /dev/null
+++ b/lib/eal/loongarch/rte_cpuflags.c
@@ -0,0 +1,94 @@
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#include "rte_cpuflags.h"
+
+#include <elf.h>
+#include <fcntl.h>
+#include <assert.h>
+#include <unistd.h>
+#include <string.h>
+
+/* Symbolic values for the entries in the auxiliary table */
+#define AT_HWCAP  16
+#define AT_HWCAP2 26
+
+/* software based registers */
+enum cpu_register_t {
+	REG_NONE = 0,
+	REG_HWCAP,
+	REG_MAX
+};
+
+typedef uint32_t hwcap_registers_t[REG_MAX];
+
+struct feature_entry {
+	uint32_t reg;
+	uint32_t bit;
+#define CPU_FLAG_NAME_MAX_LEN 64
+	char name[CPU_FLAG_NAME_MAX_LEN];
+};
+
+#define FEAT_DEF(name, reg, bit) \
+	[RTE_CPUFLAG_##name] = {reg, bit, #name},
+
+const struct feature_entry rte_cpu_feature_table[] = {
+	FEAT_DEF(CPUCFG,             REG_HWCAP,   0)
+	FEAT_DEF(LAM,                REG_HWCAP,   1)
+	FEAT_DEF(UAL,                REG_HWCAP,   2)
+	FEAT_DEF(FPU,                REG_HWCAP,   3)
+	FEAT_DEF(LSX,                REG_HWCAP,   4)
+	FEAT_DEF(LASX,               REG_HWCAP,   5)
+	FEAT_DEF(CRC32,              REG_HWCAP,   6)
+	FEAT_DEF(COMPLEX,            REG_HWCAP,   7)
+	FEAT_DEF(CRYPTO,             REG_HWCAP,   8)
+	FEAT_DEF(LVZ,                REG_HWCAP,   9)
+	FEAT_DEF(LBT_X86,            REG_HWCAP,  10)
+	FEAT_DEF(LBT_ARM,            REG_HWCAP,  11)
+	FEAT_DEF(LBT_MIPS,           REG_HWCAP,  12)
+};
+
+/*
+ * Read AUXV software register and get cpu features for LoongArch
+ */
+static void
+rte_cpu_get_features(hwcap_registers_t out)
+{
+	out[REG_HWCAP] = rte_cpu_getauxval(AT_HWCAP);
+}
+
+/*
+ * Checks if a particular flag is available on current machine.
+ */
+int
+rte_cpu_get_flag_enabled(enum rte_cpu_flag_t feature)
+{
+	const struct feature_entry *feat;
+	hwcap_registers_t regs = {0};
+
+	if (feature >= RTE_CPUFLAG_NUMFLAGS)
+		return -ENOENT;
+
+	feat = &rte_cpu_feature_table[feature];
+	if (feat->reg == REG_NONE)
+		return -EFAULT;
+
+	rte_cpu_get_features(regs);
+	return (regs[feat->reg] >> feat->bit) & 1;
+}
+
+const char *
+rte_cpu_get_flag_name(enum rte_cpu_flag_t feature)
+{
+	if (feature >= RTE_CPUFLAG_NUMFLAGS)
+		return NULL;
+	return rte_cpu_feature_table[feature].name;
+}
+
+void
+rte_cpu_get_intrinsics_support(struct rte_cpu_intrinsics *intrinsics)
+{
+	memset(intrinsics, 0, sizeof(*intrinsics));
+}
-- 
2.31.1

[PATCH v4 07/24] eal/loongarch: add dummy vector memcpy for LoongArch

[Min Zhou]

The hardware instructions based vector implementation for memcpy
will come later. At present, this dummy implementation can also
work.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_memcpy.h | 193 +++++++++++++++++++++++++
 lib/eal/loongarch/include/rte_vect.h   |  46 ++++++
 2 files changed, 239 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_memcpy.h
 create mode 100644 lib/eal/loongarch/include/rte_vect.h

diff --git a/lib/eal/loongarch/include/rte_memcpy.h b/lib/eal/loongarch/include/rte_memcpy.h
new file mode 100644
index 0000000000..98dc3dfc3b
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_memcpy.h
@@ -0,0 +1,193 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_MEMCPY_LOONGARCH_H_
+#define _RTE_MEMCPY_LOONGARCH_H_
+
+#include <stdint.h>
+#include <string.h>
+#include <rte_vect.h>
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_memcpy.h"
+
+static inline void
+rte_mov16(uint8_t *dst, const uint8_t *src)
+{
+	*(xmm_t *)dst = *(const xmm_t *)src;
+}
+
+static inline void
+rte_mov32(uint8_t *dst, const uint8_t *src)
+{
+	rte_mov16((uint8_t *)dst + 0 * 16, (const uint8_t *)src + 0 * 16);
+	rte_mov16((uint8_t *)dst + 1 * 16, (const uint8_t *)src + 1 * 16);
+}
+
+static inline void
+rte_mov48(uint8_t *dst, const uint8_t *src)
+{
+	rte_mov16((uint8_t *)dst + 0 * 16, (const uint8_t *)src + 0 * 16);
+	rte_mov16((uint8_t *)dst + 1 * 16, (const uint8_t *)src + 1 * 16);
+	rte_mov16((uint8_t *)dst + 1 * 32, (const uint8_t *)src + 1 * 32);
+}
+
+static inline void
+rte_mov64(uint8_t *dst, const uint8_t *src)
+{
+	rte_mov16((uint8_t *)dst + 0 * 16, (const uint8_t *)src + 0 * 16);
+	rte_mov16((uint8_t *)dst + 1 * 16, (const uint8_t *)src + 1 * 16);
+	rte_mov16((uint8_t *)dst + 2 * 16, (const uint8_t *)src + 2 * 16);
+	rte_mov16((uint8_t *)dst + 3 * 16, (const uint8_t *)src + 3 * 16);
+}
+
+static inline void
+rte_mov128(uint8_t *dst, const uint8_t *src)
+{
+	rte_mov16((uint8_t *)dst + 0 * 16, (const uint8_t *)src + 0 * 16);
+	rte_mov16((uint8_t *)dst + 1 * 16, (const uint8_t *)src + 1 * 16);
+	rte_mov16((uint8_t *)dst + 2 * 16, (const uint8_t *)src + 2 * 16);
+	rte_mov16((uint8_t *)dst + 3 * 16, (const uint8_t *)src + 3 * 16);
+	rte_mov16((uint8_t *)dst + 4 * 16, (const uint8_t *)src + 4 * 16);
+	rte_mov16((uint8_t *)dst + 5 * 16, (const uint8_t *)src + 5 * 16);
+	rte_mov16((uint8_t *)dst + 6 * 16, (const uint8_t *)src + 6 * 16);
+	rte_mov16((uint8_t *)dst + 7 * 16, (const uint8_t *)src + 7 * 16);
+}
+
+static inline void
+rte_mov256(uint8_t *dst, const uint8_t *src)
+{
+	rte_mov128(dst, src);
+	rte_mov128(dst + 128, src + 128);
+}
+
+#define rte_memcpy(dst, src, n)      \
+	rte_memcpy_func((dst), (src), (n))
+
+static inline void *
+rte_memcpy_func(void *dst, const void *src, size_t n)
+{
+	void *ret = dst;
+
+	/* We can't copy < 16 bytes using XMM registers so do it manually. */
+	if (n < 16) {
+		if (n & 0x01) {
+			*(uint8_t *)dst = *(const uint8_t *)src;
+			dst = (uint8_t *)dst + 1;
+			src = (const uint8_t *)src + 1;
+		}
+		if (n & 0x02) {
+			*(uint16_t *)dst = *(const uint16_t *)src;
+			dst = (uint16_t *)dst + 1;
+			src = (const uint16_t *)src + 1;
+		}
+		if (n & 0x04) {
+			*(uint32_t *)dst = *(const uint32_t *)src;
+			dst = (uint32_t *)dst + 1;
+			src = (const uint32_t *)src + 1;
+		}
+		if (n & 0x08)
+			*(uint64_t *)dst = *(const uint64_t *)src;
+		return ret;
+	}
+
+	/* Special fast cases for <= 128 bytes */
+	if (n <= 32) {
+		rte_mov16((uint8_t *)dst, (const uint8_t *)src);
+		rte_mov16((uint8_t *)dst - 16 + n,
+			(const uint8_t *)src - 16 + n);
+		return ret;
+	}
+
+	if (n <= 64) {
+		rte_mov32((uint8_t *)dst, (const uint8_t *)src);
+		rte_mov32((uint8_t *)dst - 32 + n,
+			(const uint8_t *)src - 32 + n);
+		return ret;
+	}
+
+	if (n <= 128) {
+		rte_mov64((uint8_t *)dst, (const uint8_t *)src);
+		rte_mov64((uint8_t *)dst - 64 + n,
+			(const uint8_t *)src - 64 + n);
+		return ret;
+	}
+
+	/*
+	 * For large copies > 128 bytes. This combination of 256, 64 and 16 byte
+	 * copies was found to be faster than doing 128 and 32 byte copies as
+	 * well.
+	 */
+	for ( ; n >= 256; n -= 256) {
+		rte_mov256((uint8_t *)dst, (const uint8_t *)src);
+		dst = (uint8_t *)dst + 256;
+		src = (const uint8_t *)src + 256;
+	}
+
+	/*
+	 * We split the remaining bytes (which will be less than 256) into
+	 * 64byte (2^6) chunks.
+	 * Using incrementing integers in the case labels of a switch statement
+	 * encourages the compiler to use a jump table. To get incrementing
+	 * integers, we shift the 2 relevant bits to the LSB position to first
+	 * get decrementing integers, and then subtract.
+	 */
+	switch (3 - (n >> 6)) {
+	case 0x00:
+		rte_mov64((uint8_t *)dst, (const uint8_t *)src);
+		n -= 64;
+		dst = (uint8_t *)dst + 64;
+		src = (const uint8_t *)src + 64;      /* fallthrough */
+	case 0x01:
+		rte_mov64((uint8_t *)dst, (const uint8_t *)src);
+		n -= 64;
+		dst = (uint8_t *)dst + 64;
+		src = (const uint8_t *)src + 64;      /* fallthrough */
+	case 0x02:
+		rte_mov64((uint8_t *)dst, (const uint8_t *)src);
+		n -= 64;
+		dst = (uint8_t *)dst + 64;
+		src = (const uint8_t *)src + 64;      /* fallthrough */
+	default:
+		break;
+	}
+
+	/*
+	 * We split the remaining bytes (which will be less than 64) into
+	 * 16byte (2^4) chunks, using the same switch structure as above.
+	 */
+	switch (3 - (n >> 4)) {
+	case 0x00:
+		rte_mov16((uint8_t *)dst, (const uint8_t *)src);
+		n -= 16;
+		dst = (uint8_t *)dst + 16;
+		src = (const uint8_t *)src + 16;      /* fallthrough */
+	case 0x01:
+		rte_mov16((uint8_t *)dst, (const uint8_t *)src);
+		n -= 16;
+		dst = (uint8_t *)dst + 16;
+		src = (const uint8_t *)src + 16;      /* fallthrough */
+	case 0x02:
+		rte_mov16((uint8_t *)dst, (const uint8_t *)src);
+		n -= 16;
+		dst = (uint8_t *)dst + 16;
+		src = (const uint8_t *)src + 16;      /* fallthrough */
+	default:
+		break;
+	}
+
+	/* Copy any remaining bytes, without going beyond end of buffers */
+	if (n != 0)
+		rte_mov16((uint8_t *)dst - 16 + n,
+			(const uint8_t *)src - 16 + n);
+	return ret;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_MEMCPY_LOONGARCH_H_ */
diff --git a/lib/eal/loongarch/include/rte_vect.h b/lib/eal/loongarch/include/rte_vect.h
new file mode 100644
index 0000000000..3e96fdd958
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_vect.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_VECT_LOONGARCH_H_
+#define _RTE_VECT_LOONGARCH_H_
+
+#include <stdint.h>
+#include "rte_common.h"
+#include "generic/rte_vect.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define RTE_VECT_DEFAULT_SIMD_BITWIDTH RTE_VECT_SIMD_256
+
+typedef union xmm {
+	int8_t   i8[16];
+	int16_t  i16[8];
+	int32_t  i32[4];
+	int64_t  i64[2];
+	uint8_t  u8[16];
+	uint16_t u16[8];
+	uint32_t u32[4];
+	uint64_t u64[2];
+	double   pd[2];
+} __rte_aligned(16) xmm_t;
+
+#define XMM_SIZE        (sizeof(xmm_t))
+#define XMM_MASK        (XMM_SIZE - 1)
+
+typedef union rte_xmm {
+	xmm_t x;
+	uint8_t  u8[XMM_SIZE / sizeof(uint8_t)];
+	uint16_t u16[XMM_SIZE / sizeof(uint16_t)];
+	uint32_t u32[XMM_SIZE / sizeof(uint32_t)];
+	uint64_t u64[XMM_SIZE / sizeof(uint64_t)];
+	double   pd[XMM_SIZE / sizeof(double)];
+} __rte_aligned(16) rte_xmm_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
-- 
2.31.1

[PATCH v4 08/24] eal/loongarch: add io operations for LoongArch

[Min Zhou]

This patch adds io operations for LoongArch architecture. Let it
uses generic I/O implementation.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_io.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_io.h

diff --git a/lib/eal/loongarch/include/rte_io.h b/lib/eal/loongarch/include/rte_io.h
new file mode 100644
index 0000000000..af152a727a
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_io.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_IO_LOONGARCH_H_
+#define _RTE_IO_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_io.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_IO_LOONGARCH_H_ */
-- 
2.31.1

[PATCH v4 09/24] eal/loongarch: add mcslock operations for LoongArch

[Min Zhou]

This patch adds mcslock operations for LoongArch architecture.
Let it uses generic mcslock implementation.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_mcslock.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_mcslock.h

diff --git a/lib/eal/loongarch/include/rte_mcslock.h b/lib/eal/loongarch/include/rte_mcslock.h
new file mode 100644
index 0000000000..c4484b66fa
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_mcslock.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_MCSLOCK_LOONGARCH_H_
+#define _RTE_MCSLOCK_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_mcslock.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_MCSLOCK_LOONGARCH_H_ */
-- 
2.31.1

[PATCH v4 10/24] eal/loongarch: add pause operations for LoongArch

[Min Zhou]

This patch adds architecture specific pause operations for
LoongArch architecture.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_pause.h | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_pause.h

diff --git a/lib/eal/loongarch/include/rte_pause.h b/lib/eal/loongarch/include/rte_pause.h
new file mode 100644
index 0000000000..438de23128
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_pause.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_PAUSE_LOONGARCH_H_
+#define _RTE_PAUSE_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "rte_atomic.h"
+
+#include "generic/rte_pause.h"
+
+static inline void rte_pause(void)
+{
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_PAUSE_LOONGARCH_H_ */
-- 
2.31.1

[PATCH v4 11/24] eal/loongarch: add pflock operations for LoongArch

[Min Zhou]

This patch adds pflock operations for LoongArch architecture.
Let it uses generic pflock implementation.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_pflock.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_pflock.h

diff --git a/lib/eal/loongarch/include/rte_pflock.h b/lib/eal/loongarch/include/rte_pflock.h
new file mode 100644
index 0000000000..39cc066f65
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_pflock.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+#ifndef _RTE_PFLOCK_LOONGARCH_H_
+#define _RTE_PFLOCK_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_pflock.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_PFLOCK_LOONGARCH_H_ */
-- 
2.31.1

[PATCH v4 12/24] eal/loongarch: add rwlock operations for LoongArch

[Min Zhou]

This patch adds rwlock operations for LoongArch architecture.
These implementations refer to rte_rwlock.h of PPC.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_rwlock.h | 42 ++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_rwlock.h

diff --git a/lib/eal/loongarch/include/rte_rwlock.h b/lib/eal/loongarch/include/rte_rwlock.h
new file mode 100644
index 0000000000..aac6f60120
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_rwlock.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_RWLOCK_LOONGARCH_H_
+#define _RTE_RWLOCK_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_rwlock.h"
+
+static inline void
+rte_rwlock_read_lock_tm(rte_rwlock_t *rwl)
+{
+	rte_rwlock_read_lock(rwl);
+}
+
+static inline void
+rte_rwlock_read_unlock_tm(rte_rwlock_t *rwl)
+{
+	rte_rwlock_read_unlock(rwl);
+}
+
+static inline void
+rte_rwlock_write_lock_tm(rte_rwlock_t *rwl)
+{
+	rte_rwlock_write_lock(rwl);
+}
+
+static inline void
+rte_rwlock_write_unlock_tm(rte_rwlock_t *rwl)
+{
+	rte_rwlock_write_unlock(rwl);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_RWLOCK_LOONGARCH_H_ */
-- 
2.31.1

[PATCH v4 13/24] eal/loongarch: add ticketlock operations for LoongArch

[Min Zhou]

This patch adds ticketlock operations for LoongArch architecture.
Let it uses generic ticketlock implementation.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/include/rte_ticketlock.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_ticketlock.h

diff --git a/lib/eal/loongarch/include/rte_ticketlock.h b/lib/eal/loongarch/include/rte_ticketlock.h
new file mode 100644
index 0000000000..3959bcae7b
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_ticketlock.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_TICKETLOCK_LOONGARCH_H_
+#define _RTE_TICKETLOCK_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_ticketlock.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_TICKETLOCK_LOONGARCH_H_ */
-- 
2.31.1

[PATCH v4 14/24] eal/loongarch: add power operations for LoongArch

[Min Zhou]

This patch adds power operations for LoongArch architecture. In
fact, these operations are temporarily not supported on LoongArch.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 .../loongarch/include/rte_power_intrinsics.h  | 20 ++++++++
 lib/eal/loongarch/rte_power_intrinsics.c      | 51 +++++++++++++++++++
 2 files changed, 71 insertions(+)
 create mode 100644 lib/eal/loongarch/include/rte_power_intrinsics.h
 create mode 100644 lib/eal/loongarch/rte_power_intrinsics.c

diff --git a/lib/eal/loongarch/include/rte_power_intrinsics.h b/lib/eal/loongarch/include/rte_power_intrinsics.h
new file mode 100644
index 0000000000..b6a2c0d82e
--- /dev/null
+++ b/lib/eal/loongarch/include/rte_power_intrinsics.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _RTE_POWER_INTRINSIC_LOONGARCH_H_
+#define _RTE_POWER_INTRINSIC_LOONGARCH_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_common.h>
+
+#include "generic/rte_power_intrinsics.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_POWER_INTRINSIC_LOONGARCH_H_ */
diff --git a/lib/eal/loongarch/rte_power_intrinsics.c b/lib/eal/loongarch/rte_power_intrinsics.c
new file mode 100644
index 0000000000..3dd1375ce4
--- /dev/null
+++ b/lib/eal/loongarch/rte_power_intrinsics.c
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#include "rte_power_intrinsics.h"
+
+/**
+ * This function is not supported on LOONGARCH.
+ */
+int
+rte_power_monitor(const struct rte_power_monitor_cond *pmc,
+		const uint64_t tsc_timestamp)
+{
+	RTE_SET_USED(pmc);
+	RTE_SET_USED(tsc_timestamp);
+
+	return -ENOTSUP;
+}
+
+/**
+ * This function is not supported on LOONGARCH.
+ */
+int
+rte_power_pause(const uint64_t tsc_timestamp)
+{
+	RTE_SET_USED(tsc_timestamp);
+
+	return -ENOTSUP;
+}
+
+/**
+ * This function is not supported on LOONGARCH.
+ */
+int
+rte_power_monitor_wakeup(const unsigned int lcore_id)
+{
+	RTE_SET_USED(lcore_id);
+
+	return -ENOTSUP;
+}
+
+int
+rte_power_monitor_multi(const struct rte_power_monitor_cond pmc[],
+		const uint32_t num, const uint64_t tsc_timestamp)
+{
+	RTE_SET_USED(pmc);
+	RTE_SET_USED(num);
+	RTE_SET_USED(tsc_timestamp);
+
+	return -ENOTSUP;
+}
-- 
2.31.1

[PATCH v4 15/24] eal/loongarch: add hypervisor operations for LoongArch

[Min Zhou]

This patch adds hypervisor operations for LoongArch architecture.
In fact, these operations are currently not supported on LoongArch.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/loongarch/rte_hypervisor.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
 create mode 100644 lib/eal/loongarch/rte_hypervisor.c

diff --git a/lib/eal/loongarch/rte_hypervisor.c b/lib/eal/loongarch/rte_hypervisor.c
new file mode 100644
index 0000000000..d044906f71
--- /dev/null
+++ b/lib/eal/loongarch/rte_hypervisor.c
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#include "rte_hypervisor.h"
+
+enum rte_hypervisor
+rte_hypervisor_get(void)
+{
+	return RTE_HYPERVISOR_UNKNOWN;
+}
-- 
2.31.1

[PATCH v4 16/24] mem: add huge page size definition for LoongArch

[Min Zhou]

LoongArch architecture has a different huge page size (32MB) than
other architectures. This patch adds a new huge page size for
LoongArch architecture.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/include/rte_memory.h  | 1 +
 lib/eal/include/rte_memzone.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/lib/eal/include/rte_memory.h b/lib/eal/include/rte_memory.h
index 68b069fd04..ff4b5695db 100644
--- a/lib/eal/include/rte_memory.h
+++ b/lib/eal/include/rte_memory.h
@@ -30,6 +30,7 @@ extern "C" {
 #define RTE_PGSIZE_256K (1ULL << 18)
 #define RTE_PGSIZE_2M   (1ULL << 21)
 #define RTE_PGSIZE_16M  (1ULL << 24)
+#define RTE_PGSIZE_32M  (1ULL << 25)
 #define RTE_PGSIZE_256M (1ULL << 28)
 #define RTE_PGSIZE_512M (1ULL << 29)
 #define RTE_PGSIZE_1G   (1ULL << 30)
diff --git a/lib/eal/include/rte_memzone.h b/lib/eal/include/rte_memzone.h
index 5db1210831..a3305d9e97 100644
--- a/lib/eal/include/rte_memzone.h
+++ b/lib/eal/include/rte_memzone.h
@@ -35,6 +35,7 @@ extern "C" {
 #define RTE_MEMZONE_1GB            0x00000002   /**< Use 1GB pages. */
 #define RTE_MEMZONE_16MB           0x00000100   /**< Use 16MB pages. */
 #define RTE_MEMZONE_16GB           0x00000200   /**< Use 16GB pages. */
+#define RTE_MEMZONE_32MB           0x00000400	/**< Use 32MB pages. */
 #define RTE_MEMZONE_256KB          0x00010000   /**< Use 256KB pages. */
 #define RTE_MEMZONE_256MB          0x00020000   /**< Use 256MB pages. */
 #define RTE_MEMZONE_512MB          0x00040000   /**< Use 512MB pages. */
-- 
2.31.1

[PATCH v4 17/24] eal/linux: set eal base address for LoongArch

[Min Zhou]

This patch sets a different eal base address for LoongArch
architecture.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 lib/eal/linux/eal_memory.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/lib/eal/linux/eal_memory.c b/lib/eal/linux/eal_memory.c
index c890c42106..60fc8cc6ca 100644
--- a/lib/eal/linux/eal_memory.c
+++ b/lib/eal/linux/eal_memory.c
@@ -77,7 +77,11 @@ uint64_t eal_get_baseaddr(void)
 	 * rte_mem_check_dma_mask for ensuring all memory is within supported
 	 * range.
 	 */
+#if defined(RTE_ARCH_LOONGARCH)
+	return 0x7000000000ULL;
+#else
 	return 0x100000000ULL;
+#endif
 }
 
 /*
-- 
2.31.1

[PATCH v4 18/24] meson: introduce LoongArch architecture

[Min Zhou]

This patch adds some meson.build files for building DPDK on
LoongArch architecture.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 .../loongarch/loongarch_loongarch64_linux_gcc | 16 +++++++
 config/loongarch/meson.build                  | 43 +++++++++++++++++++
 lib/eal/loongarch/include/meson.build         | 21 +++++++++
 lib/eal/loongarch/meson.build                 | 11 +++++
 meson.build                                   |  2 +
 5 files changed, 93 insertions(+)
 create mode 100644 config/loongarch/loongarch_loongarch64_linux_gcc
 create mode 100644 config/loongarch/meson.build
 create mode 100644 lib/eal/loongarch/include/meson.build
 create mode 100644 lib/eal/loongarch/meson.build

diff --git a/config/loongarch/loongarch_loongarch64_linux_gcc b/config/loongarch/loongarch_loongarch64_linux_gcc
new file mode 100644
index 0000000000..0c44ae96e6
--- /dev/null
+++ b/config/loongarch/loongarch_loongarch64_linux_gcc
@@ -0,0 +1,16 @@
+[binaries]
+c = 'loongarch64-unknown-linux-gnu-gcc'
+cpp = 'loongarch64-unknown-linux-gnu-cpp'
+ar = 'loongarch64-unknown-linux-gnu-gcc-ar'
+strip = 'loongarch64-unknown-linux-gnu-strip'
+pcap-config = ''
+
+[host_machine]
+system = 'linux'
+cpu_family = 'loongarch64'
+cpu = '3a5000'
+endian = 'little'
+
+[properties]
+implementor_id = 'generic'
+implementor_pn = 'default'
diff --git a/config/loongarch/meson.build b/config/loongarch/meson.build
new file mode 100644
index 0000000000..d58e1ea6e9
--- /dev/null
+++ b/config/loongarch/meson.build
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2022 Loongson Technology Corporation Limited
+
+if not dpdk_conf.get('RTE_ARCH_64')
+	error('Only 64-bit compiles are supported for this platform type')
+endif
+dpdk_conf.set('RTE_ARCH', 'loongarch')
+dpdk_conf.set('RTE_ARCH_LOONGARCH', 1)
+dpdk_conf.set('RTE_ARCH_NO_VECTOR', 1)
+
+machine_args_generic = [
+    ['default', ['-march=loongarch64']],
+]
+
+flags_generic = [
+    ['RTE_MACHINE', '"loongarch64"'],
+    ['RTE_MAX_LCORE', 64],
+    ['RTE_MAX_NUMA_NODES', 16],
+    ['RTE_CACHE_LINE_SIZE', 64]]
+
+impl_generic = ['Generic loongarch', flags_generic, machine_args_generic]
+
+machine = []
+machine_args = []
+
+machine = impl_generic
+impl_pn = 'default'
+
+message('Implementer : ' + machine[0])
+foreach flag: machine[1]
+    if flag.length() > 0
+dpdk_conf.set(flag[0], flag[1])
+    endif
+endforeach
+
+foreach marg: machine[2]
+    if marg[0] == impl_pn
+        foreach f: marg[1]
+           machine_args += f
+        endforeach
+    endif
+endforeach
+message(machine_args)
diff --git a/lib/eal/loongarch/include/meson.build b/lib/eal/loongarch/include/meson.build
new file mode 100644
index 0000000000..d5699c5373
--- /dev/null
+++ b/lib/eal/loongarch/include/meson.build
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2022 Loongson Technology Corporation Limited
+
+arch_headers = files(
+	'rte_atomic.h',
+	'rte_byteorder.h',
+	'rte_cpuflags.h',
+	'rte_cycles.h',
+	'rte_io.h',
+	'rte_mcslock.h',
+	'rte_memcpy.h',
+	'rte_pause.h',
+	'rte_pflock.h',
+	'rte_power_intrinsics.h',
+	'rte_prefetch.h',
+	'rte_rwlock.h',
+	'rte_spinlock.h',
+	'rte_ticketlock.h',
+	'rte_vect.h',
+)
+install_headers(arch_headers, subdir: get_option('include_subdir_arch'))
diff --git a/lib/eal/loongarch/meson.build b/lib/eal/loongarch/meson.build
new file mode 100644
index 0000000000..e14b1ed431
--- /dev/null
+++ b/lib/eal/loongarch/meson.build
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2022 Loongson Technology Corporation Limited
+
+subdir('include')
+
+sources += files(
+	'rte_cpuflags.c',
+	'rte_cycles.c',
+	'rte_hypervisor.c',
+	'rte_power_intrinsics.c',
+)
diff --git a/meson.build b/meson.build
index a32f14024b..027724a6e5 100644
--- a/meson.build
+++ b/meson.build
@@ -56,6 +56,8 @@ elif host_machine.cpu_family().startswith('ppc')
     arch_subdir = 'ppc'
 elif host_machine.cpu_family().startswith('riscv')
     arch_subdir = 'riscv'
+elif host_machine.cpu_family().startswith('loongarch')
+    arch_subdir = 'loongarch'
 endif
 
 # configure the build, and make sure configs here and in config folder are
-- 
2.31.1

[PATCH v4 19/24] test/xmmt_ops: add dummy vector implementation for LoongArch

[Min Zhou]

The hardware instructions based vector implementation will come
in a future patch. This dummy implementation can also work.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 app/test/test_xmmt_ops.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/app/test/test_xmmt_ops.h b/app/test/test_xmmt_ops.h
index 55f256599e..912679e81a 100644
--- a/app/test/test_xmmt_ops.h
+++ b/app/test/test_xmmt_ops.h
@@ -65,6 +65,23 @@ vect_set_epi32(int i3, int i2, int i1, int i0)
 	return data;
 }
 
+#elif defined(RTE_ARCH_LOONGARCH)
+/* loads the xmm_t value from address p(does not need to be 16-byte aligned)*/
+static __rte_always_inline xmm_t
+vect_loadu_sil128(void *p)
+{
+	xmm_t data;
+	data = *(const xmm_t *)p;
+	return data;
+}
+
+/* sets the 4 signed 32-bit integer values and returns the xmm_t variable */
+static __rte_always_inline xmm_t
+vect_set_epi32(int i3, int i2, int i1, int i0)
+{
+	xmm_t data = (xmm_t){.u32 = {i0, i1, i2, i3} };
+	return data;
+}
 #endif
 
 #endif /* _TEST_XMMT_OPS_H_ */
-- 
2.31.1

[PATCH v4 20/24] ixgbe: add dummy vector implementation for LoongArch

[Min Zhou]

The purpose of this patch is used to fix building issues for
LoongArch architecture. The hardware instructions based vector
implementation will come in a future patch.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 drivers/net/ixgbe/ixgbe_rxtx_vec_lsx.c | 60 ++++++++++++++++++++++++++
 drivers/net/ixgbe/meson.build          |  2 +
 2 files changed, 62 insertions(+)
 create mode 100644 drivers/net/ixgbe/ixgbe_rxtx_vec_lsx.c

diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec_lsx.c b/drivers/net/ixgbe/ixgbe_rxtx_vec_lsx.c
new file mode 100644
index 0000000000..412c8f937a
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_rxtx_vec_lsx.c
@@ -0,0 +1,60 @@
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#include "base/ixgbe_common.h"
+#include "ixgbe_ethdev.h"
+#include "ixgbe_rxtx.h"
+
+/* The vector support will come later */
+#ifdef RTE_ARCH_NO_VECTOR
+int
+ixgbe_rx_vec_dev_conf_condition_check(__rte_unused struct rte_eth_dev *dev)
+{
+	return -1;
+}
+
+uint16_t
+ixgbe_recv_pkts_vec(__rte_unused void *rx_queue,
+	__rte_unused struct rte_mbuf **rx_pkts,
+	__rte_unused uint16_t nb_pkts)
+{
+	return 0;
+}
+
+uint16_t
+ixgbe_recv_scattered_pkts_vec(__rte_unused void *rx_queue,
+	__rte_unused struct rte_mbuf **rx_pkts,
+	__rte_unused uint16_t nb_pkts)
+{
+	return 0;
+}
+
+int
+ixgbe_rxq_vec_setup(__rte_unused struct ixgbe_rx_queue *rxq)
+{
+	return -1;
+}
+
+uint16_t
+ixgbe_xmit_fixed_burst_vec(__rte_unused void *tx_queue,
+		__rte_unused struct rte_mbuf **tx_pkts,
+		__rte_unused uint16_t nb_pkts)
+{
+	return 0;
+}
+
+int
+ixgbe_txq_vec_setup(__rte_unused struct ixgbe_tx_queue *txq)
+{
+	return -1;
+}
+
+void
+ixgbe_rx_queue_release_mbufs_vec(__rte_unused struct ixgbe_rx_queue *rxq)
+{
+}
+#else
+#error "The current version of LoongArch does not support vector!"
+#endif
diff --git a/drivers/net/ixgbe/meson.build b/drivers/net/ixgbe/meson.build
index 162f8d5f46..33c9a58ac8 100644
--- a/drivers/net/ixgbe/meson.build
+++ b/drivers/net/ixgbe/meson.build
@@ -29,6 +29,8 @@ if arch_subdir == 'x86'
     endif
 elif arch_subdir == 'arm'
     sources += files('ixgbe_rxtx_vec_neon.c')
+elif arch_subdir == 'loongarch'
+    sources += files('ixgbe_rxtx_vec_lsx.c')
 endif
 
 includes += include_directories('base')
-- 
2.31.1

[PATCH v4 21/24] i40e: add dummy vector implementation for LoongArch

[Min Zhou]

The purpose of this patch is used to fix building issues for
LoongArch architecture. The hardware instructions based vector
implementation will come in a future patch.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 drivers/net/i40e/i40e_rxtx_vec_lsx.c | 54 ++++++++++++++++++++++++++++
 drivers/net/i40e/meson.build         |  2 ++
 2 files changed, 56 insertions(+)
 create mode 100644 drivers/net/i40e/i40e_rxtx_vec_lsx.c

diff --git a/drivers/net/i40e/i40e_rxtx_vec_lsx.c b/drivers/net/i40e/i40e_rxtx_vec_lsx.c
new file mode 100644
index 0000000000..727dc178f2
--- /dev/null
+++ b/drivers/net/i40e/i40e_rxtx_vec_lsx.c
@@ -0,0 +1,54 @@
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Loongson Technology Corporation Limited
+ */
+
+#include "i40e_ethdev.h"
+#include "i40e_rxtx.h"
+
+/* The vector support will come later */
+#ifdef RTE_ARCH_NO_VECTOR
+uint16_t
+i40e_recv_scattered_pkts_vec(__rte_unused void *rx_queue,
+		__rte_unused struct rte_mbuf **rx_pkts,
+		__rte_unused uint16_t nb_pkts)
+{
+	return 0;
+}
+
+uint16_t
+i40e_recv_pkts_vec(__rte_unused void *rx_queue,
+		__rte_unused struct rte_mbuf **rx_pkts,
+		__rte_unused uint16_t nb_pkts)
+{
+	return 0;
+}
+uint16_t
+i40e_xmit_fixed_burst_vec(__rte_unused void *tx_queue,
+		__rte_unused struct rte_mbuf **tx_pkts,
+		__rte_unused uint16_t nb_pkts)
+{
+	return 0;
+}
+void __rte_cold
+i40e_rx_queue_release_mbufs_vec(__rte_unused struct i40e_rx_queue *rxq)
+{
+}
+int __rte_cold
+i40e_rxq_vec_setup(__rte_unused struct i40e_rx_queue *rxq)
+{
+	return -1;
+}
+int __rte_cold
+i40e_txq_vec_setup(__rte_unused struct i40e_tx_queue *txq)
+{
+	return -1;
+}
+int __rte_cold
+i40e_rx_vec_dev_conf_condition_check(__rte_unused struct rte_eth_dev *dev)
+{
+	return -1;
+}
+#else
+#error "The current version of LoongArch does not support vector!"
+#endif
diff --git a/drivers/net/i40e/meson.build b/drivers/net/i40e/meson.build
index 84fd42754e..01b9d0e753 100644
--- a/drivers/net/i40e/meson.build
+++ b/drivers/net/i40e/meson.build
@@ -83,6 +83,8 @@ elif arch_subdir == 'ppc'
        sources += files('i40e_rxtx_vec_altivec.c')
 elif arch_subdir == 'arm'
        sources += files('i40e_rxtx_vec_neon.c')
+elif arch_subdir == 'loongarch'
+       sources += files('i40e_rxtx_vec_lsx.c')
 endif
 
 headers = files('rte_pmd_i40e.h')
-- 
2.31.1

[PATCH v4 22/24] tap: add system call number for LoongArch

[Min Zhou]

This patch adds system call number of bpf for LoongArch
architecture.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 drivers/net/tap/tap_bpf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/tap/tap_bpf.h b/drivers/net/tap/tap_bpf.h
index 639bdf3a79..4707f65e1d 100644
--- a/drivers/net/tap/tap_bpf.h
+++ b/drivers/net/tap/tap_bpf.h
@@ -93,7 +93,7 @@ union bpf_attr {
 #  define __NR_bpf 321
 # elif defined(__arm__)
 #  define __NR_bpf 386
-# elif defined(__aarch64__)
+# elif defined(__aarch64__) || defined(__loongarch__)
 #  define __NR_bpf 280
 # elif defined(__sparc__)
 #  define __NR_bpf 349
-- 
2.31.1

[PATCH v4 23/24] memif: add system call number for LoongArch

[Min Zhou]

This patch adds system call number of memfd_create for LoongArch
architecture.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 drivers/net/memif/rte_eth_memif.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/memif/rte_eth_memif.h b/drivers/net/memif/rte_eth_memif.h
index 81e7dceae0..669222f93c 100644
--- a/drivers/net/memif/rte_eth_memif.h
+++ b/drivers/net/memif/rte_eth_memif.h
@@ -174,7 +174,7 @@ const char *memif_version(void);
 #define __NR_memfd_create 1073742143
 #elif defined __arm__
 #define __NR_memfd_create 385
-#elif defined __aarch64__
+#elif defined __aarch64__ || defined __loongarch__
 #define __NR_memfd_create 279
 #elif defined __powerpc__
 #define __NR_memfd_create 360
-- 
2.31.1

[PATCH v4 24/24] maintainers: claim responsibility for LoongArch

[Min Zhou]

This patch adds claim responsibility for LoongArch architecture.

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 32ffdd1a61..996e70c1cb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -275,6 +275,15 @@ F: lib/eal/include/rte_random.h
 F: lib/eal/common/rte_random.c
 F: app/test/test_rand_perf.c
 
+LoongArch
+M: Min Zhou <zhoumin@loongson.cn>
+F: config/loongarch/
+F: lib/eal/loongarch/
+F: lib/*/*_lsx.*
+F: drivers/*/*/*_lsx.*
+F: app/*/*_lsx.*
+F: examples/*/*_lsx.*
+
 ARM v7
 M: Jan Viktorin <viktorin@rehivetech.com>
 M: Ruifeng Wang <ruifeng.wang@arm.com>
-- 
2.31.1