From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To: Olivier Matz <olivier.matz@6wind.com>
Cc: dev@dpdk.org
Subject: [PATCH] mbuf: remove deprecated offload flags
Date: Fri, 5 Aug 2022 11:02:42 +0300 [thread overview]
Message-ID: <20220805080242.1311373-1-andrew.rybchenko@oktetlabs.ru> (raw)
Remove deprecated ``PKT_*`` flags. Use corresponding flags with
``RTE_MBUF_F_`` prefix instead.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
---
doc/guides/rel_notes/release_22_11.rst | 3 +
lib/mbuf/rte_mbuf_core.h | 113 -------------------------
2 files changed, 3 insertions(+), 113 deletions(-)
diff --git a/doc/guides/rel_notes/release_22_11.rst b/doc/guides/rel_notes/release_22_11.rst
index 8c021cf050..7052a55dfc 100644
--- a/doc/guides/rel_notes/release_22_11.rst
+++ b/doc/guides/rel_notes/release_22_11.rst
@@ -84,6 +84,9 @@ API Changes
Also, make sure to start the actual text at the margin.
=======================================================
+* mbuf: Removed deprecated ``PKT_*`` flags.
+ Use corresponding flags with ``RTE_MBUF_F_`` prefix instead.
+
ABI Changes
-----------
diff --git a/lib/mbuf/rte_mbuf_core.h b/lib/mbuf/rte_mbuf_core.h
index 3d6ddd6773..a59bb6d3ad 100644
--- a/lib/mbuf/rte_mbuf_core.h
+++ b/lib/mbuf/rte_mbuf_core.h
@@ -48,23 +48,18 @@ extern "C" {
* present.
*/
#define RTE_MBUF_F_RX_VLAN (1ULL << 0)
-#define PKT_RX_VLAN RTE_DEPRECATED(PKT_RX_VLAN) RTE_MBUF_F_RX_VLAN
/** RX packet with RSS hash result. */
#define RTE_MBUF_F_RX_RSS_HASH (1ULL << 1)
-#define PKT_RX_RSS_HASH RTE_DEPRECATED(PKT_RX_RSS_HASH) RTE_MBUF_F_RX_RSS_HASH
/** RX packet with FDIR match indicate. */
#define RTE_MBUF_F_RX_FDIR (1ULL << 2)
-#define PKT_RX_FDIR RTE_DEPRECATED(PKT_RX_FDIR) RTE_MBUF_F_RX_FDIR
/**
* This flag is set when the outermost IP header checksum is detected as
* wrong by the hardware.
*/
#define RTE_MBUF_F_RX_OUTER_IP_CKSUM_BAD (1ULL << 5)
-#define PKT_RX_OUTER_IP_CKSUM_BAD RTE_DEPRECATED(PKT_RX_OUTER_IP_CKSUM_BAD) \
- RTE_MBUF_F_RX_OUTER_IP_CKSUM_BAD
/**
* A vlan has been stripped by the hardware and its tci is saved in
@@ -73,8 +68,6 @@ extern "C" {
* When RTE_MBUF_F_RX_VLAN_STRIPPED is set, RTE_MBUF_F_RX_VLAN must also be set.
*/
#define RTE_MBUF_F_RX_VLAN_STRIPPED (1ULL << 6)
-#define PKT_RX_VLAN_STRIPPED RTE_DEPRECATED(PKT_RX_VLAN_STRIPPED) \
- RTE_MBUF_F_RX_VLAN_STRIPPED
/**
* Mask of bits used to determine the status of RX IP checksum.
@@ -85,21 +78,11 @@ extern "C" {
* data, but the integrity of the IP header is verified.
*/
#define RTE_MBUF_F_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7))
-#define PKT_RX_IP_CKSUM_MASK RTE_DEPRECATED(PKT_RX_IP_CKSUM_MASK) \
- RTE_MBUF_F_RX_IP_CKSUM_MASK
#define RTE_MBUF_F_RX_IP_CKSUM_UNKNOWN 0
#define RTE_MBUF_F_RX_IP_CKSUM_BAD (1ULL << 4)
#define RTE_MBUF_F_RX_IP_CKSUM_GOOD (1ULL << 7)
#define RTE_MBUF_F_RX_IP_CKSUM_NONE ((1ULL << 4) | (1ULL << 7))
-#define PKT_RX_IP_CKSUM_UNKNOWN RTE_DEPRECATED(PKT_RX_IP_CKSUM_UNKNOWN) \
- RTE_MBUF_F_RX_IP_CKSUM_UNKNOWN
-#define PKT_RX_IP_CKSUM_BAD RTE_DEPRECATED(PKT_RX_IP_CKSUM_BAD) \
- RTE_MBUF_F_RX_IP_CKSUM_BAD
-#define PKT_RX_IP_CKSUM_GOOD RTE_DEPRECATED(PKT_RX_IP_CKSUM_GOOD) \
- RTE_MBUF_F_RX_IP_CKSUM_GOOD
-#define PKT_RX_IP_CKSUM_NONE RTE_DEPRECATED(PKT_RX_IP_CKSUM_NONE) \
- RTE_MBUF_F_RX_IP_CKSUM_NONE
/**
* Mask of bits used to determine the status of RX L4 checksum.
@@ -110,41 +93,23 @@ extern "C" {
* data, but the integrity of the L4 data is verified.
*/
#define RTE_MBUF_F_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8))
-#define PKT_RX_L4_CKSUM_MASK RTE_DEPRECATED(PKT_RX_L4_CKSUM_MASK) \
- RTE_MBUF_F_RX_L4_CKSUM_MASK
#define RTE_MBUF_F_RX_L4_CKSUM_UNKNOWN 0
#define RTE_MBUF_F_RX_L4_CKSUM_BAD (1ULL << 3)
#define RTE_MBUF_F_RX_L4_CKSUM_GOOD (1ULL << 8)
#define RTE_MBUF_F_RX_L4_CKSUM_NONE ((1ULL << 3) | (1ULL << 8))
-#define PKT_RX_L4_CKSUM_UNKNOWN RTE_DEPRECATED(PKT_RX_L4_CKSUM_UNKNOWN) \
- RTE_MBUF_F_RX_L4_CKSUM_UNKNOWN
-#define PKT_RX_L4_CKSUM_BAD RTE_DEPRECATED(PKT_RX_L4_CKSUM_BAD) \
- RTE_MBUF_F_RX_L4_CKSUM_BAD
-#define PKT_RX_L4_CKSUM_GOOD RTE_DEPRECATED(PKT_RX_L4_CKSUM_GOOD) \
- RTE_MBUF_F_RX_L4_CKSUM_GOOD
-#define PKT_RX_L4_CKSUM_NONE RTE_DEPRECATED(PKT_RX_L4_CKSUM_NONE) \
- RTE_MBUF_F_RX_L4_CKSUM_NONE
/** RX IEEE1588 L2 Ethernet PT Packet. */
#define RTE_MBUF_F_RX_IEEE1588_PTP (1ULL << 9)
-#define PKT_RX_IEEE1588_PTP RTE_DEPRECATED(PKT_RX_IEEE1588_PTP) \
- RTE_MBUF_F_RX_IEEE1588_PTP
/** RX IEEE1588 L2/L4 timestamped packet.*/
#define RTE_MBUF_F_RX_IEEE1588_TMST (1ULL << 10)
-#define PKT_RX_IEEE1588_TMST RTE_DEPRECATED(PKT_RX_IEEE1588_TMST) \
- RTE_MBUF_F_RX_IEEE1588_TMST
/** FD id reported if FDIR match. */
#define RTE_MBUF_F_RX_FDIR_ID (1ULL << 13)
-#define PKT_RX_FDIR_ID RTE_DEPRECATED(PKT_RX_FDIR_ID) \
- RTE_MBUF_F_RX_FDIR_ID
/** Flexible bytes reported if FDIR match. */
#define RTE_MBUF_F_RX_FDIR_FLX (1ULL << 14)
-#define PKT_RX_FDIR_FLX RTE_DEPRECATED(PKT_RX_FDIR_FLX) \
- RTE_MBUF_F_RX_FDIR_FLX
/**
* The outer VLAN has been stripped by the hardware and its TCI is
@@ -162,8 +127,6 @@ extern "C" {
* are saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
*/
#define RTE_MBUF_F_RX_QINQ_STRIPPED (1ULL << 15)
-#define PKT_RX_QINQ_STRIPPED RTE_DEPRECATED(PKT_RX_QINQ_STRIPPED) \
- RTE_MBUF_F_RX_QINQ_STRIPPED
/**
* When packets are coalesced by a hardware or virtual driver, this flag
@@ -171,7 +134,6 @@ extern "C" {
* valid and is set to the segment size of original packets.
*/
#define RTE_MBUF_F_RX_LRO (1ULL << 16)
-#define PKT_RX_LRO RTE_DEPRECATED(PKT_RX_LRO) RTE_MBUF_F_RX_LRO
/* There is no flag defined at offset 17. It is free for any future use. */
@@ -179,15 +141,11 @@ extern "C" {
* Indicate that security offload processing was applied on the RX packet.
*/
#define RTE_MBUF_F_RX_SEC_OFFLOAD (1ULL << 18)
-#define PKT_RX_SEC_OFFLOAD RTE_DEPRECATED(PKT_RX_SEC_OFFLOAD) \
- RTE_MBUF_F_RX_SEC_OFFLOAD
/**
* Indicate that security offload processing failed on the RX packet.
*/
#define RTE_MBUF_F_RX_SEC_OFFLOAD_FAILED (1ULL << 19)
-#define PKT_RX_SEC_OFFLOAD_FAILED RTE_DEPRECATED(PKT_RX_SEC_OFFLOAD_FAILED) \
- RTE_MBUF_F_RX_SEC_OFFLOAD_FAILED
/**
* The RX packet is a double VLAN, and the outer tci has been
@@ -198,7 +156,6 @@ extern "C" {
* present.
*/
#define RTE_MBUF_F_RX_QINQ (1ULL << 20)
-#define PKT_RX_QINQ RTE_DEPRECATED(PKT_RX_QINQ) RTE_MBUF_F_RX_QINQ
/**
* Mask of bits used to determine the status of outer RX L4 checksum.
@@ -216,30 +173,16 @@ extern "C" {
* states if the RTE_ETH_RX_OFFLOAD_OUTER_UDP_CKSUM offload is available.
*/
#define RTE_MBUF_F_RX_OUTER_L4_CKSUM_MASK ((1ULL << 21) | (1ULL << 22))
-#define PKT_RX_OUTER_L4_CKSUM_MASK RTE_DEPRECATED(PKT_RX_OUTER_L4_CKSUM_MASK) \
- RTE_MBUF_F_RX_OUTER_L4_CKSUM_MASK
#define RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN 0
#define RTE_MBUF_F_RX_OUTER_L4_CKSUM_BAD (1ULL << 21)
#define RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD (1ULL << 22)
#define RTE_MBUF_F_RX_OUTER_L4_CKSUM_INVALID ((1ULL << 21) | (1ULL << 22))
-#define PKT_RX_OUTER_L4_CKSUM_UNKNOWN \
- RTE_DEPRECATED(PKT_RX_OUTER_L4_CKSUM_UNKNOWN) \
- RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-#define PKT_RX_OUTER_L4_CKSUM_BAD RTE_DEPRECATED(PKT_RX_OUTER_L4_CKSUM_BAD) \
- RTE_MBUF_F_RX_OUTER_L4_CKSUM_BAD
-#define PKT_RX_OUTER_L4_CKSUM_GOOD RTE_DEPRECATED(PKT_RX_OUTER_L4_CKSUM_GOOD) \
- RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
-#define PKT_RX_OUTER_L4_CKSUM_INVALID \
- RTE_DEPRECATED(PKT_RX_OUTER_L4_CKSUM_INVALID) \
- RTE_MBUF_F_RX_OUTER_L4_CKSUM_INVALID
/* add new RX flags here, don't forget to update RTE_MBUF_F_FIRST_FREE */
#define RTE_MBUF_F_FIRST_FREE (1ULL << 23)
-#define PKT_FIRST_FREE RTE_DEPRECATED(PKT_FIRST_FREE) RTE_MBUF_F_FIRST_FREE
#define RTE_MBUF_F_LAST_FREE (1ULL << 40)
-#define PKT_LAST_FREE RTE_DEPRECATED(PKT_LAST_FREE) RTE_MBUF_F_LAST_FREE
/* add new TX flags here, don't forget to update RTE_MBUF_F_LAST_FREE */
@@ -253,8 +196,6 @@ extern "C" {
* 2) Configure RTE_ETH_TX_OFFLOAD_OUTER_UDP_CKSUM offload flag.
*/
#define RTE_MBUF_F_TX_OUTER_UDP_CKSUM (1ULL << 41)
-#define PKT_TX_OUTER_UDP_CKSUM RTE_DEPRECATED(PKT_TX_OUTER_UDP_CKSUM) \
- RTE_MBUF_F_TX_OUTER_UDP_CKSUM
/**
* UDP Fragmentation Offload flag. This flag is used for enabling UDP
@@ -262,7 +203,6 @@ extern "C" {
* to store the MSS of UDP fragments.
*/
#define RTE_MBUF_F_TX_UDP_SEG (1ULL << 42)
-#define PKT_TX_UDP_SEG RTE_DEPRECATED(PKT_TX_UDP_SEG) RTE_MBUF_F_TX_UDP_SEG
/**
* Request security offload processing on the TX packet.
@@ -270,15 +210,12 @@ extern "C" {
* indicating L2 header size and where L3 header starts.
*/
#define RTE_MBUF_F_TX_SEC_OFFLOAD (1ULL << 43)
-#define PKT_TX_SEC_OFFLOAD RTE_DEPRECATED(PKT_TX_SEC_OFFLOAD) \
- RTE_MBUF_F_TX_SEC_OFFLOAD
/**
* Offload the MACsec. This flag must be set by the application to enable
* this offload feature for a packet to be transmitted.
*/
#define RTE_MBUF_F_TX_MACSEC (1ULL << 44)
-#define PKT_TX_MACSEC RTE_DEPRECATED(PKT_TX_MACSEC) RTE_MBUF_F_TX_MACSEC
/**
* Bits 45:48 used for the tunnel type.
@@ -326,35 +263,12 @@ extern "C" {
/* add new TX TUNNEL type here */
#define RTE_MBUF_F_TX_TUNNEL_MASK (0xFULL << 45)
-#define PKT_TX_TUNNEL_VXLAN RTE_DEPRECATED(PKT_TX_TUNNEL_VXLAN) \
- RTE_MBUF_F_TX_TUNNEL_VXLAN
-#define PKT_TX_TUNNEL_GRE RTE_DEPRECATED(PKT_TX_TUNNEL_GRE) \
- RTE_MBUF_F_TX_TUNNEL_GRE
-#define PKT_TX_TUNNEL_IPIP RTE_DEPRECATED(PKT_TX_TUNNEL_IPIP) \
- RTE_MBUF_F_TX_TUNNEL_IPIP
-#define PKT_TX_TUNNEL_GENEVE RTE_DEPRECATED(PKT_TX_TUNNEL_GENEVE) \
- RTE_MBUF_F_TX_TUNNEL_GENEVE
-#define PKT_TX_TUNNEL_MPLSINUDP RTE_DEPRECATED(PKT_TX_TUNNEL_MPLSINUDP) \
- RTE_MBUF_F_TX_TUNNEL_MPLSINUDP
-#define PKT_TX_TUNNEL_VXLAN_GPE RTE_DEPRECATED(PKT_TX_TUNNEL_VXLAN_GPE) \
- RTE_MBUF_F_TX_TUNNEL_VXLAN_GPE
-#define PKT_TX_TUNNEL_GTP RTE_DEPRECATED(PKT_TX_TUNNEL_GTP) \
- RTE_MBUF_F_TX_TUNNEL_GTP
-#define PKT_TX_TUNNEL_IP RTE_DEPRECATED(PKT_TX_TUNNEL_IP) \
- RTE_MBUF_F_TX_TUNNEL_IP
-#define PKT_TX_TUNNEL_UDP RTE_DEPRECATED(PKT_TX_TUNNEL_UDP) \
- RTE_MBUF_F_TX_TUNNEL_UDP
-#define PKT_TX_TUNNEL_MASK RTE_DEPRECATED(PKT_TX_TUNNEL_MASK) \
- RTE_MBUF_F_TX_TUNNEL_MASK
-
/**
* Double VLAN insertion (QinQ) request to driver, driver may offload the
* insertion based on device capability.
* mbuf 'vlan_tci' & 'vlan_tci_outer' must be valid when this flag is set.
*/
#define RTE_MBUF_F_TX_QINQ (1ULL << 49)
-#define PKT_TX_QINQ RTE_DEPRECATED(PKT_TX_QINQ) RTE_MBUF_F_TX_QINQ
-#define PKT_TX_QINQ_PKT RTE_DEPRECATED(PKT_TX_QINQ_PKT) RTE_MBUF_F_TX_QINQ
/**
* TCP segmentation offload. To enable this offload feature for a
@@ -366,12 +280,9 @@ extern "C" {
* - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
*/
#define RTE_MBUF_F_TX_TCP_SEG (1ULL << 50)
-#define PKT_TX_TCP_SEG RTE_DEPRECATED(PKT_TX_TCP_SEG) RTE_MBUF_F_TX_TCP_SEG
/** TX IEEE1588 packet to timestamp. */
#define RTE_MBUF_F_TX_IEEE1588_TMST (1ULL << 51)
-#define PKT_TX_IEEE1588_TMST RTE_DEPRECATED(PKT_TX_IEEE1588_TMST) \
- RTE_MBUF_F_TX_IEEE1588_TMST
/*
* Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
@@ -398,16 +309,6 @@ extern "C" {
/** Mask for L4 cksum offload request. */
#define RTE_MBUF_F_TX_L4_MASK (3ULL << 52)
-#define PKT_TX_L4_NO_CKSUM RTE_DEPRECATED(PKT_TX_L4_NO_CKSUM) \
- RTE_MBUF_F_TX_L4_NO_CKSUM
-#define PKT_TX_TCP_CKSUM RTE_DEPRECATED(PKT_TX_TCP_CKSUM) \
- RTE_MBUF_F_TX_TCP_CKSUM
-#define PKT_TX_SCTP_CKSUM RTE_DEPRECATED(PKT_TX_SCTP_CKSUM) \
- RTE_MBUF_F_TX_SCTP_CKSUM
-#define PKT_TX_UDP_CKSUM RTE_DEPRECATED(PKT_TX_UDP_CKSUM) \
- RTE_MBUF_F_TX_UDP_CKSUM
-#define PKT_TX_L4_MASK RTE_DEPRECATED(PKT_TX_L4_MASK) RTE_MBUF_F_TX_L4_MASK
-
/**
* Offload the IP checksum in the hardware. The flag RTE_MBUF_F_TX_IPV4 should
* also be set by the application, although a PMD will only check
@@ -415,7 +316,6 @@ extern "C" {
* - fill the mbuf offload information: l2_len, l3_len
*/
#define RTE_MBUF_F_TX_IP_CKSUM (1ULL << 54)
-#define PKT_TX_IP_CKSUM RTE_DEPRECATED(PKT_TX_IP_CKSUM) RTE_MBUF_F_TX_IP_CKSUM
/**
* Packet is IPv4. This flag must be set when using any offload feature
@@ -424,7 +324,6 @@ extern "C" {
* the inner headers.
*/
#define RTE_MBUF_F_TX_IPV4 (1ULL << 55)
-#define PKT_TX_IPV4 RTE_DEPRECATED(PKT_TX_IPV4) RTE_MBUF_F_TX_IPV4
/**
* Packet is IPv6. This flag must be set when using an offload feature
@@ -433,7 +332,6 @@ extern "C" {
* the inner headers.
*/
#define RTE_MBUF_F_TX_IPV6 (1ULL << 56)
-#define PKT_TX_IPV6 RTE_DEPRECATED(PKT_TX_IPV6) RTE_MBUF_F_TX_IPV6
/**
* VLAN tag insertion request to driver, driver may offload the insertion
@@ -441,8 +339,6 @@ extern "C" {
* mbuf 'vlan_tci' field must be valid when this flag is set.
*/
#define RTE_MBUF_F_TX_VLAN (1ULL << 57)
-#define PKT_TX_VLAN RTE_DEPRECATED(PKT_TX_VLAN) RTE_MBUF_F_TX_VLAN
-#define PKT_TX_VLAN_PKT RTE_DEPRECATED(PKT_TX_VLAN_PKT) RTE_MBUF_F_TX_VLAN
/**
* Offload the IP checksum of an external header in the hardware. The
@@ -451,8 +347,6 @@ extern "C" {
* - fill the mbuf offload information: outer_l2_len, outer_l3_len
*/
#define RTE_MBUF_F_TX_OUTER_IP_CKSUM (1ULL << 58)
-#define PKT_TX_OUTER_IP_CKSUM RTE_DEPRECATED(PKT_TX_OUTER_IP_CKSUM) \
- RTE_MBUF_F_TX_OUTER_IP_CKSUM
/**
* Packet outer header is IPv4. This flag must be set when using any
@@ -460,8 +354,6 @@ extern "C" {
* outer header of the tunneled packet is an IPv4 packet.
*/
#define RTE_MBUF_F_TX_OUTER_IPV4 (1ULL << 59)
-#define PKT_TX_OUTER_IPV4 RTE_DEPRECATED(PKT_TX_OUTER_IPV4) \
- RTE_MBUF_F_TX_OUTER_IPV4
/**
* Packet outer header is IPv6. This flag must be set when using any
@@ -469,8 +361,6 @@ extern "C" {
* header of the tunneled packet is an IPv6 packet.
*/
#define RTE_MBUF_F_TX_OUTER_IPV6 (1ULL << 60)
-#define PKT_TX_OUTER_IPV6 RTE_DEPRECATED(PKT_TX_OUTER_IPV6) \
- RTE_MBUF_F_TX_OUTER_IPV6
/**
* Bitmask of all supported packet Tx offload features flags,
@@ -493,16 +383,13 @@ extern "C" {
RTE_MBUF_F_TX_SEC_OFFLOAD | \
RTE_MBUF_F_TX_UDP_SEG | \
RTE_MBUF_F_TX_OUTER_UDP_CKSUM)
-#define PKT_TX_OFFLOAD_MASK RTE_DEPRECATED(PKT_TX_OFFLOAD_MASK) RTE_MBUF_F_TX_OFFLOAD_MASK
/**
* Mbuf having an external buffer attached. shinfo in mbuf must be filled.
*/
#define RTE_MBUF_F_EXTERNAL (1ULL << 61)
-#define EXT_ATTACHED_MBUF RTE_DEPRECATED(EXT_ATTACHED_MBUF) RTE_MBUF_F_EXTERNAL
#define RTE_MBUF_F_INDIRECT (1ULL << 62) /**< Indirect attached mbuf */
-#define IND_ATTACHED_MBUF RTE_DEPRECATED(IND_ATTACHED_MBUF) RTE_MBUF_F_INDIRECT
/** Alignment constraint of mbuf private area. */
#define RTE_MBUF_PRIV_ALIGN 8
--
2.30.2
next reply other threads:[~2022-08-05 8:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-05 8:02 Andrew Rybchenko [this message]
2022-08-22 15:26 ` David Marchand
2022-09-26 11:51 ` Olivier Matz
2022-09-26 12:25 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220805080242.1311373-1-andrew.rybchenko@oktetlabs.ru \
--to=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=olivier.matz@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).