DPDK patches and discussions
 help / color / mirror / Atom feed
From: Yuan Wang <yuanx.wang@intel.com>
To: thomas@monjalon.net, andrew.rybchenko@oktetlabs.ru,
	xiaoyun.li@intel.com, ferruh.yigit@xilinx.com,
	aman.deep.singh@intel.com, yuying.zhang@intel.com,
	qi.z.zhang@intel.com, jerinjacobk@gmail.com,
	viacheslavo@nvidia.com, mdr@ashroe.eu
Cc: stephen@networkplumber.org, xuan.ding@intel.com,
	wenxuanx.wu@intel.com, dev@dpdk.org,
	Yuan Wang <yuanx.wang@intel.com>
Subject: [PATCH 3/4] app/testpmd: add rxhdrs commands and parameters
Date: Sat, 13 Aug 2022 02:15:51 +0800	[thread overview]
Message-ID: <20220812181552.2908067-4-yuanx.wang@intel.com> (raw)
In-Reply-To: <20220812181552.2908067-1-yuanx.wang@intel.com>

Add command line parameter:
--rxhdrs=mac,[ipv4,udp]

Set the protocol_hdr of segments to scatter packets on receiving if
split feature is engaged. And the queues with BUFFER_SPLIT flag.

Add interactive mode command:
testpmd>set rxhdrs mac,ipv4,tcp,udp,sctp
(protocol sequence should be valid)

The protocol split feature is off by default. To enable protocol split,
you need:
1. Start testpmd with multiple mempools. E.g. --mbuf-size=2048,2048
2. Configure Rx queue with rx_offload buffer split on.
3. Set the protocol type of buffer split. E.g. set rxhdrs mac,ipv4
        (default protocols of testpmd : mac|icmp|ipv4|ipv6|tcp|udp|
                              sctp|inner_mac|inner_ipv4|inner_ipv6|
                              inner_tcp|inner_udp|inner_sctp)
Above protocols can be configured in testpmd. But the configuration can
only be applied when it is supported by specific pmd.

Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Wenxuan Wu <wenxuanx.wu@intel.com>
---
 app/test-pmd/cmdline.c    | 123 +++++++++++++++++++++++++++++++++++++-
 app/test-pmd/config.c     |  70 ++++++++++++++++++++++
 app/test-pmd/parameters.c |  16 ++++-
 app/test-pmd/testpmd.c    |   6 +-
 app/test-pmd/testpmd.h    |   6 ++
 5 files changed, 215 insertions(+), 6 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index b4fe9dfb17..f00b7bc6a4 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -183,7 +183,7 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"show (rxq|txq) info (port_id) (queue_id)\n"
 			"    Display information for configured RX/TX queue.\n\n"
 
-			"show config (rxtx|cores|fwd|rxoffs|rxpkts|txpkts)\n"
+			"show config (rxtx|cores|fwd|rxoffs|rxpkts|rxhdrs|txpkts)\n"
 			"    Display the given configuration.\n\n"
 
 			"read rxd (port_id) (queue_id) (rxd_id)\n"
@@ -307,6 +307,14 @@ static void cmd_help_long_parsed(void *parsed_result,
 			" Affects only the queues configured with split"
 			" offloads.\n\n"
 
+			"set rxhdrs (mac[,ipv4])*\n"
+			"	Set the protocol hdr of each segment to scatter"
+			" packets on receiving if split feature is engaged."
+			" Affects only the queues configured with split"
+			" offloads.\n\n"
+			"	Supported proto header: mac|ipv4|ipv6|tcp|udp|sctp|"
+			"inner_mac|inner_ipv4|inner_ipv6|inner_tcp|inner_udp|inner_sctp\n"
+
 			"set txpkts (x[,y]*)\n"
 			"    Set the length of each segment of TXONLY"
 			" and optionally CSUM packets.\n\n"
@@ -3456,6 +3464,68 @@ static cmdline_parse_inst_t cmd_stop = {
 	},
 };
 
+static unsigned int
+get_ptype(char *value)
+{
+	uint32_t protocol;
+
+	if (!strcmp(value, "mac"))
+		protocol = RTE_PTYPE_L2_ETHER;
+	else if (!strcmp(value, "ipv4"))
+		protocol = RTE_PTYPE_L3_IPV4;
+	else if (!strcmp(value, "ipv6"))
+		protocol = RTE_PTYPE_L3_IPV6;
+	else if (!strcmp(value, "tcp"))
+		protocol = RTE_PTYPE_L4_TCP;
+	else if (!strcmp(value, "udp"))
+		protocol = RTE_PTYPE_L4_UDP;
+	else if (!strcmp(value, "sctp"))
+		protocol = RTE_PTYPE_L4_SCTP;
+	else if (!strcmp(value, "inner_mac"))
+		protocol = RTE_PTYPE_INNER_L2_ETHER;
+	else if (!strcmp(value, "inner_ipv4"))
+		protocol = RTE_PTYPE_INNER_L3_IPV4;
+	else if (!strcmp(value, "inner_ipv6"))
+		protocol = RTE_PTYPE_INNER_L3_IPV6;
+	else if (!strcmp(value, "inner_tcp"))
+		protocol = RTE_PTYPE_INNER_L4_TCP;
+	else if (!strcmp(value, "inner_udp"))
+		protocol = RTE_PTYPE_INNER_L4_UDP;
+	else if (!strcmp(value, "inner_sctp"))
+		protocol = RTE_PTYPE_INNER_L4_SCTP;
+	else {
+		fprintf(stderr, "Unsupported protocol: %s\n", value);
+		protocol = RTE_PTYPE_UNKNOWN;
+	}
+
+	return protocol;
+}
+/* *** SET RXHDRSLIST *** */
+
+unsigned int
+parse_hdrs_list(const char *str, const char *item_name, unsigned int max_items,
+				unsigned int *parsed_items, int check_hdrs_sequence)
+{
+	unsigned int nb_item;
+	char *cur;
+	char *tmp;
+
+	nb_item = 0;
+	char *str2 = strdup(str);
+	cur = strtok_r(str2, ",", &tmp);
+	while (cur != NULL) {
+		parsed_items[nb_item] = get_ptype(cur);
+		cur = strtok_r(NULL, ",", &tmp);
+		nb_item++;
+	}
+	if (nb_item > max_items)
+		fprintf(stderr, "Number of %s = %u > %u (maximum items)\n",
+			item_name, nb_item + 1, max_items);
+	free(str2);
+	if (!check_hdrs_sequence)
+		return nb_item;
+	return nb_item;
+}
 /* *** SET CORELIST and PORTLIST CONFIGURATION *** */
 
 unsigned int
@@ -3825,6 +3895,50 @@ static cmdline_parse_inst_t cmd_set_rxpkts = {
 	},
 };
 
+/* *** SET SEGMENT HEADERS OF RX PACKETS SPLIT *** */
+struct cmd_set_rxhdrs_result {
+	cmdline_fixed_string_t set;
+	cmdline_fixed_string_t rxhdrs;
+	cmdline_fixed_string_t values;
+};
+
+static void
+cmd_set_rxhdrs_parsed(void *parsed_result,
+		      __rte_unused struct cmdline *cl,
+		      __rte_unused void *data)
+{
+	struct cmd_set_rxhdrs_result *res;
+	unsigned int seg_hdrs[MAX_SEGS_BUFFER_SPLIT];
+	unsigned int nb_segs;
+
+	res = parsed_result;
+	nb_segs = parse_hdrs_list(res->values, "segment hdrs",
+				  MAX_SEGS_BUFFER_SPLIT, seg_hdrs, 0);
+	if (nb_segs > 0)
+		set_rx_pkt_hdrs(seg_hdrs, nb_segs);
+	cmd_reconfig_device_queue(RTE_PORT_ALL, 0, 1);
+}
+static cmdline_parse_token_string_t cmd_set_rxhdrs_set =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_rxhdrs_result,
+				set, "set");
+static cmdline_parse_token_string_t cmd_set_rxhdrs_rxhdrs =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_rxhdrs_result,
+				rxhdrs, "rxhdrs");
+static cmdline_parse_token_string_t cmd_set_rxhdrs_values =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_rxhdrs_result,
+				values, NULL);
+
+static cmdline_parse_inst_t cmd_set_rxhdrs = {
+	.f = cmd_set_rxhdrs_parsed,
+	.data = NULL,
+	.help_str = "set rxhdrs <mac[,ipv4]*>",
+	.tokens = {
+		(void *)&cmd_set_rxhdrs_set,
+		(void *)&cmd_set_rxhdrs_rxhdrs,
+		(void *)&cmd_set_rxhdrs_values,
+		NULL,
+	},
+};
 /* *** SET SEGMENT LENGTHS OF TXONLY PACKETS *** */
 
 struct cmd_set_txpkts_result {
@@ -6918,6 +7032,8 @@ static void cmd_showcfg_parsed(void *parsed_result,
 		show_rx_pkt_offsets();
 	else if (!strcmp(res->what, "rxpkts"))
 		show_rx_pkt_segments();
+	else if (!strcmp(res->what, "rxhdrs"))
+		show_rx_pkt_hdrs();
 	else if (!strcmp(res->what, "txpkts"))
 		show_tx_pkt_segments();
 	else if (!strcmp(res->what, "txtimes"))
@@ -6930,12 +7046,12 @@ static cmdline_parse_token_string_t cmd_showcfg_port =
 	TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, cfg, "config");
 static cmdline_parse_token_string_t cmd_showcfg_what =
 	TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, what,
-				 "rxtx#cores#fwd#rxoffs#rxpkts#txpkts#txtimes");
+				 "rxtx#cores#fwd#rxoffs#rxpkts#rxhdrs#txpkts#txtimes");
 
 static cmdline_parse_inst_t cmd_showcfg = {
 	.f = cmd_showcfg_parsed,
 	.data = NULL,
-	.help_str = "show config rxtx|cores|fwd|rxoffs|rxpkts|txpkts|txtimes",
+	.help_str = "show config rxtx|cores|fwd|rxoffs|rxpkts|rxhdrs|txpkts|txtimes",
 	.tokens = {
 		(void *)&cmd_showcfg_show,
 		(void *)&cmd_showcfg_port,
@@ -14166,6 +14282,7 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_set_log,
 	(cmdline_parse_inst_t *)&cmd_set_rxoffs,
 	(cmdline_parse_inst_t *)&cmd_set_rxpkts,
+	(cmdline_parse_inst_t *)&cmd_set_rxhdrs,
 	(cmdline_parse_inst_t *)&cmd_set_txpkts,
 	(cmdline_parse_inst_t *)&cmd_set_txsplit,
 	(cmdline_parse_inst_t *)&cmd_set_txtimes,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index a2939867c4..4102ebb3f9 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -4940,6 +4940,76 @@ show_rx_pkt_segments(void)
 	}
 }
 
+static const char *get_ptype_str(uint32_t ptype)
+{
+	switch (ptype) {
+	case RTE_PTYPE_L2_ETHER:
+		return "outer_mac";
+	case RTE_PTYPE_L3_IPV4:
+		return "ipv4";
+	case RTE_PTYPE_L3_IPV6:
+		return "ipv6";
+	case RTE_PTYPE_L4_TCP:
+		return "tcp";
+	case RTE_PTYPE_L4_UDP:
+		return "udp";
+	case RTE_PTYPE_L4_SCTP:
+		return "sctp";
+	case RTE_PTYPE_INNER_L2_ETHER:
+		return "inner_mac";
+	case RTE_PTYPE_INNER_L3_IPV4:
+		return "inner_ipv4";
+	case RTE_PTYPE_INNER_L3_IPV6:
+		return "inner_ipv6";
+	case RTE_PTYPE_INNER_L4_TCP:
+		return "inner_tcp";
+	case RTE_PTYPE_INNER_L4_UDP:
+		return "inner_udp";
+	case RTE_PTYPE_INNER_L4_SCTP:
+		return "inner_sctp";
+	default:
+		return "unsupported";
+	}
+}
+
+void
+show_rx_pkt_hdrs(void)
+{
+	uint32_t i, n;
+
+	n = rx_pkt_nb_segs;
+	printf("Number of segments: %u\n", n);
+	if (n) {
+		printf("Packet segs: ");
+		for (i = 0; i < n - 1; i++)
+			printf("%s, ", get_ptype_str(rx_pkt_hdr_protos[i]));
+		printf("payload\n");
+	}
+}
+
+void
+set_rx_pkt_hdrs(unsigned int *seg_hdrs, unsigned int nb_segs)
+{
+	unsigned int i;
+
+	if (nb_segs + 1 > MAX_SEGS_BUFFER_SPLIT) {
+		printf("nb segments per RX packets=%u > "
+		       "MAX_SEGS_BUFFER_SPLIT - ignored\n", nb_segs + 1);
+		return;
+	}
+
+	memset(rx_pkt_hdr_protos, 0, sizeof(rx_pkt_hdr_protos));
+
+	for (i = 0; i < nb_segs; i++)
+		rx_pkt_hdr_protos[i] = (uint32_t)seg_hdrs[i];
+	rx_pkt_hdr_protos[nb_segs] = RTE_PTYPE_ALL_MASK;
+	/*
+	 * We calculate the number of hdrs, but payload is not included,
+	 * so rx_pkt_nb_segs would increase 1.
+	 */
+	rx_pkt_nb_segs = nb_segs + 1;
+}
+
 void
 set_rx_pkt_segments(unsigned int *seg_lengths, unsigned int nb_segs)
 {
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index e3c9757f3f..206194c385 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -164,6 +164,7 @@ usage(char* progname)
 	       " Used mainly with PCAP drivers.\n");
 	printf("  --rxoffs=X[,Y]*: set RX segment offsets for split.\n");
 	printf("  --rxpkts=X[,Y]*: set RX segment sizes to split.\n");
+	printf("  --rxhdrs=mac[,ipv4]*: set RX segment protocol to split.\n");
 	printf("  --txpkts=X[,Y]*: set TX segment sizes"
 		" or total packet length.\n");
 	printf("  --txonly-multi-flow: generate multiple flows in txonly mode\n");
@@ -676,6 +677,7 @@ launch_args_parse(int argc, char** argv)
 		{ "flow-isolate-all",	        0, 0, 0 },
 		{ "rxoffs",			1, 0, 0 },
 		{ "rxpkts",			1, 0, 0 },
+		{ "rxhdrs",			1, 0, 0 },
 		{ "txpkts",			1, 0, 0 },
 		{ "txonly-multi-flow",		0, 0, 0 },
 		{ "rxq-share",			2, 0, 0 },
@@ -1331,7 +1333,6 @@ launch_args_parse(int argc, char** argv)
 			if (!strcmp(lgopts[opt_idx].name, "rxpkts")) {
 				unsigned int seg_len[MAX_SEGS_BUFFER_SPLIT];
 				unsigned int nb_segs;
-
 				nb_segs = parse_item_list
 						(optarg, "rxpkt segments",
 						 MAX_SEGS_BUFFER_SPLIT,
@@ -1341,6 +1342,19 @@ launch_args_parse(int argc, char** argv)
 				else
 					rte_exit(EXIT_FAILURE, "bad rxpkts\n");
 			}
+			if (!strcmp(lgopts[opt_idx].name, "rxhdrs")) {
+				unsigned int seg_hdrs[MAX_SEGS_BUFFER_SPLIT];
+				unsigned int nb_segs;
+
+				nb_segs = parse_hdrs_list
+						(optarg, "rxpkt segments",
+						MAX_SEGS_BUFFER_SPLIT,
+						seg_hdrs, 0);
+				if (nb_segs >= 1)
+					set_rx_pkt_hdrs(seg_hdrs, nb_segs);
+				else
+					rte_exit(EXIT_FAILURE, "bad rxpkts\n");
+			}
 			if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
 				unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
 				unsigned int nb_segs;
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index addcbcac85..039e2edfca 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -247,6 +247,7 @@ uint16_t rx_pkt_seg_lengths[MAX_SEGS_BUFFER_SPLIT];
 uint8_t  rx_pkt_nb_segs; /**< Number of segments to split */
 uint16_t rx_pkt_seg_offsets[MAX_SEGS_BUFFER_SPLIT];
 uint8_t  rx_pkt_nb_offs; /**< Number of specified offsets */
+uint32_t rx_pkt_hdr_protos[MAX_SEGS_BUFFER_SPLIT];
 
 /*
  * Configuration of packet segments used by the "txonly" processing engine.
@@ -2680,11 +2681,12 @@ rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
 		mpx = mbuf_pool_find(socket_id, mp_n);
 		/* Handle zero as mbuf data buffer size. */
 		rx_seg->length = rx_pkt_seg_lengths[i] ?
-				   rx_pkt_seg_lengths[i] :
-				   mbuf_data_size[mp_n];
+					rx_pkt_seg_lengths[i] :
+					mbuf_data_size[mp_n];
 		rx_seg->offset = i < rx_pkt_nb_offs ?
 				   rx_pkt_seg_offsets[i] : 0;
 		rx_seg->mp = mpx ? mpx : mp;
+		rx_seg->proto_hdr = rx_pkt_hdr_protos[i];
 	}
 	rx_conf->rx_nseg = rx_pkt_nb_segs;
 	rx_conf->rx_seg = rx_useg;
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index fb2f5195d3..de992c9416 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -562,6 +562,7 @@ extern uint32_t max_rx_pkt_len;
  * Configuration of packet segments used to scatter received packets
  * if some of split features is configured.
  */
+extern uint32_t rx_pkt_hdr_protos[MAX_SEGS_BUFFER_SPLIT];
 extern uint16_t rx_pkt_seg_lengths[MAX_SEGS_BUFFER_SPLIT];
 extern uint8_t  rx_pkt_nb_segs; /**< Number of segments to split */
 extern uint16_t rx_pkt_seg_offsets[MAX_SEGS_BUFFER_SPLIT];
@@ -892,6 +893,9 @@ inc_tx_burst_stats(struct fwd_stream *fs, uint16_t nb_tx)
 unsigned int parse_item_list(const char *str, const char *item_name,
 			unsigned int max_items,
 			unsigned int *parsed_items, int check_unique_values);
+unsigned int parse_hdrs_list(const char *str, const char *item_name,
+			unsigned int max_item,
+			unsigned int *parsed_items, int check_unique_values);
 void launch_args_parse(int argc, char** argv);
 void cmdline_read_from_file(const char *filename);
 int init_cmdline(void);
@@ -1049,6 +1053,8 @@ void set_record_core_cycles(uint8_t on_off);
 void set_record_burst_stats(uint8_t on_off);
 void set_verbose_level(uint16_t vb_level);
 void set_rx_pkt_segments(unsigned int *seg_lengths, unsigned int nb_segs);
+void set_rx_pkt_hdrs(unsigned int *seg_protos, unsigned int nb_segs);
+void show_rx_pkt_hdrs(void);
 void show_rx_pkt_segments(void);
 void set_rx_pkt_offsets(unsigned int *seg_offsets, unsigned int nb_offs);
 void show_rx_pkt_offsets(void);
-- 
2.25.1


  parent reply	other threads:[~2022-08-12 10:32 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-12 18:15 [PATCH 0/4] support protocol based buffer split Yuan Wang
2022-08-12 18:15 ` [PATCH 1/4] ethdev: introduce protocol header API Yuan Wang
2022-08-12 18:15 ` [PATCH 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-08-12 18:15 ` Yuan Wang [this message]
2022-08-12 18:15 ` [PATCH 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-01 22:33 ` [PATCH v2 0/4] support protocol based buffer split Yuan Wang
2022-09-01 22:34 ` [PATCH v2 1/4] ethdev: introduce protocol header API Yuan Wang
2022-09-01 22:35 ` [PATCH v2 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-09-01 22:36 ` [PATCH v2 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-09-01 22:37 ` [PATCH v2 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-02 19:10 ` [PATCH v3 0/4] support protocol based buffer split Yuan Wang
2022-09-02 19:10   ` [PATCH v3 1/4] ethdev: introduce protocol header API Yuan Wang
2022-09-12 11:24     ` Andrew Rybchenko
2022-09-16  8:34       ` Wang, YuanX
2022-09-02 19:10   ` [PATCH v3 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-09-12 11:47     ` Andrew Rybchenko
2022-09-16  8:38       ` Wang, YuanX
2022-09-20  5:35         ` Andrew Rybchenko
2022-09-22  3:13           ` Wang, YuanX
2022-09-13  7:56     ` Suanming Mou
2022-09-16  8:39       ` Wang, YuanX
2022-09-02 19:10   ` [PATCH v3 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-09-02 19:10   ` [PATCH v3 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-20 11:12 ` [PATCH v4 0/4] support protocol based buffer split Yuan Wang
2022-09-20 11:12   ` [PATCH v4 1/4] ethdev: introduce protocol header API Yuan Wang
2022-09-20 11:12   ` [PATCH v4 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-09-20 11:12   ` [PATCH v4 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-09-20 11:12   ` [PATCH v4 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-26  9:40 ` [PATCH v5 0/4] support protocol based buffer split Yuan Wang
2022-09-26  9:40   ` [PATCH v5 1/4] ethdev: introduce protocol header API Yuan Wang
2022-09-26  9:40   ` [PATCH v5 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-09-28 15:42     ` Wang, YuanX
2022-09-26  9:40   ` [PATCH v5 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-09-26  9:40   ` [PATCH v5 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-29 18:59 ` [PATCH v6 0/4] support protocol based buffer split Yuan Wang
2022-09-29 18:59   ` [PATCH v6 1/4] ethdev: introduce protocol header API Yuan Wang
2022-09-29 18:59   ` [PATCH v6 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-09-29 18:59   ` [PATCH v6 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-09-29 18:59   ` [PATCH v6 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-30  6:45     ` Tang, Yaqi
2022-10-01 21:05 ` [PATCH v7 0/4] support protocol based buffer split Yuan Wang
2022-10-01 21:05   ` [PATCH v7 1/4] ethdev: introduce protocol header API Yuan Wang
2022-10-03  7:04     ` Andrew Rybchenko
2022-10-04  2:21       ` Wang, YuanX
2022-10-04  7:52         ` Andrew Rybchenko
2022-10-04 15:00           ` Wang, YuanX
2022-10-01 21:05   ` [PATCH v7 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-10-02  4:01     ` Wang, YuanX
2022-10-03  7:47     ` Andrew Rybchenko
2022-10-04  2:48       ` Wang, YuanX
2022-10-04  8:22         ` Andrew Rybchenko
2022-10-04 15:01           ` Wang, YuanX
2022-10-01 21:05   ` [PATCH v7 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-10-01 21:05   ` [PATCH v7 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-10-05 23:18 ` [PATCH v8 0/4] support protocol based buffer split Yuan Wang
2022-10-05 23:18   ` [PATCH v8 1/4] ethdev: introduce protocol header API Yuan Wang
2022-10-06 10:11     ` Andrew Rybchenko
2022-10-05 23:18   ` [PATCH v8 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-10-06 10:11     ` Andrew Rybchenko
2022-10-08 14:30       ` Ding, Xuan
2022-10-05 23:18   ` [PATCH v8 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-10-06 10:12     ` Andrew Rybchenko
2022-10-05 23:18   ` [PATCH v8 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-10-06 10:12     ` Andrew Rybchenko
2022-10-06 10:13   ` [PATCH v8 0/4] support protocol based buffer split Andrew Rybchenko
2022-10-09 20:25 ` [PATCH v9 " Yuan Wang
2022-10-09 14:58   ` Andrew Rybchenko
2022-10-10  2:45     ` Ding, Xuan
2022-10-09 20:25   ` [PATCH v9 1/4] ethdev: introduce protocol header API Yuan Wang
2022-10-09 20:25   ` [PATCH v9 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-10-09 20:25   ` [PATCH v9 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-10-09 20:25   ` [PATCH v9 4/4] net/ice: support buffer split in Rx path Yuan Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220812181552.2908067-4-yuanx.wang@intel.com \
    --to=yuanx.wang@intel.com \
    --cc=aman.deep.singh@intel.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@xilinx.com \
    --cc=jerinjacobk@gmail.com \
    --cc=mdr@ashroe.eu \
    --cc=qi.z.zhang@intel.com \
    --cc=stephen@networkplumber.org \
    --cc=thomas@monjalon.net \
    --cc=viacheslavo@nvidia.com \
    --cc=wenxuanx.wu@intel.com \
    --cc=xiaoyun.li@intel.com \
    --cc=xuan.ding@intel.com \
    --cc=yuying.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).