From: Hernan Vargas <hernan.vargas@intel.com>
To: dev@dpdk.org, gakhil@marvell.com, trix@redhat.com
Cc: nicolas.chautru@intel.com, qi.z.zhang@intel.com,
Hernan Vargas <hernan.vargas@intel.com>
Subject: [PATCH v1 09/33] baseband/acc100: add LDPC transport block support
Date: Mon, 15 Aug 2022 22:52:34 -0700 [thread overview]
Message-ID: <20220816055258.107564-10-hernan.vargas@intel.com> (raw)
In-Reply-To: <20220816055258.107564-1-hernan.vargas@intel.com>
Add LDPC enqueue functions to handle transport blocks.
Signed-off-by: Hernan Vargas <hernan.vargas@intel.com>
---
drivers/baseband/acc100/acc100_pmd.h | 1 +
drivers/baseband/acc100/rte_acc100_pmd.c | 197 ++++++++++++++++++++++-
2 files changed, 196 insertions(+), 2 deletions(-)
diff --git a/drivers/baseband/acc100/acc100_pmd.h b/drivers/baseband/acc100/acc100_pmd.h
index 0c9810ca56..19a1f434bc 100644
--- a/drivers/baseband/acc100/acc100_pmd.h
+++ b/drivers/baseband/acc100/acc100_pmd.h
@@ -135,6 +135,7 @@
#define ACC100_DEC_OFFSET (80)
#define ACC100_EXT_MEM /* Default option with memory external to CPU */
#define ACC100_HARQ_OFFSET_THRESHOLD 1024
+#define ACC100_LIMIT_DL_MUX_BITS 534
/* Constants from K0 computation from 3GPP 38.212 Table 5.4.2.1-2 */
#define ACC100_N_ZC_1 66 /* N = 66 Zc for BG 1 */
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c b/drivers/baseband/acc100/rte_acc100_pmd.c
index 6c6e3e1072..b0f41f15cb 100644
--- a/drivers/baseband/acc100/rte_acc100_pmd.c
+++ b/drivers/baseband/acc100/rte_acc100_pmd.c
@@ -2588,6 +2588,61 @@ enqueue_ldpc_enc_n_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op **ops,
return num;
}
+/* Enqueue one encode operations for ACC100 device for a partial TB
+ * all codes blocks have same configuration multiplexed on the same descriptor
+ */
+static inline void
+enqueue_ldpc_enc_part_tb(struct acc100_queue *q, struct rte_bbdev_enc_op *op,
+ uint16_t total_enqueued_descs, int16_t num_cbs, uint32_t e,
+ uint16_t in_len_B, uint32_t out_len_B, uint32_t *in_offset,
+ uint32_t *out_offset)
+{
+
+ union acc100_dma_desc *desc = NULL;
+ struct rte_mbuf *output_head, *output;
+ int i, next_triplet;
+ struct rte_bbdev_op_ldpc_enc *enc = &op->ldpc_enc;
+
+
+ uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_descs)
+ & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+ acc100_fcw_le_fill(op, &desc->req.fcw_le, num_cbs, e);
+
+ /** This could be done at polling */
+ acc100_header_init(&desc->req);
+ desc->req.numCBs = num_cbs;
+
+ desc->req.m2dlen = 1 + num_cbs;
+ desc->req.d2mlen = num_cbs;
+ next_triplet = 1;
+
+ for (i = 0; i < num_cbs; i++) {
+ desc->req.data_ptrs[next_triplet].address =
+ rte_pktmbuf_iova_offset(enc->input.data,
+ *in_offset);
+ *in_offset += in_len_B;
+ desc->req.data_ptrs[next_triplet].blen = in_len_B;
+ next_triplet++;
+ desc->req.data_ptrs[next_triplet].address =
+ rte_pktmbuf_iova_offset(
+ enc->output.data, *out_offset);
+ *out_offset += out_len_B;
+ desc->req.data_ptrs[next_triplet].blen = out_len_B;
+ next_triplet++;
+ enc->output.length += out_len_B;
+ output_head = output = enc->output.data;
+ mbuf_append(output_head, output, out_len_B);
+ }
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ rte_memdump(stderr, "FCW", &desc->req.fcw_le,
+ sizeof(desc->req.fcw_le) - 8);
+ rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
+#endif
+
+}
+
/* Enqueue one encode operations for ACC100 device in CB mode */
static inline int
enqueue_ldpc_enc_one_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op *op,
@@ -2728,6 +2783,76 @@ enqueue_enc_one_op_tb(struct acc100_queue *q, struct rte_bbdev_enc_op *op,
return current_enqueued_cbs;
}
+/* Enqueue one encode operations for ACC100 device in TB mode.
+ * returns the number of descs used
+ */
+static inline int
+enqueue_ldpc_enc_one_op_tb(struct acc100_queue *q, struct rte_bbdev_enc_op *op,
+ uint16_t enq_descs, uint8_t cbs_in_tb)
+{
+#ifndef RTE_LIBRTE_BBDEV_SKIP_VALIDATE
+ if (validate_ldpc_enc_op(op, q) == -1) {
+ rte_bbdev_log(ERR, "LDPC encoder validation failed");
+ return -EINVAL;
+ }
+#endif
+ uint8_t num_a, num_b;
+ uint16_t desc_idx;
+ uint8_t r = op->ldpc_enc.tb_params.r;
+ uint8_t cab = op->ldpc_enc.tb_params.cab;
+ union acc100_dma_desc *desc;
+ uint16_t init_enq_descs = enq_descs;
+ uint16_t input_len_B = ((op->ldpc_enc.basegraph == 1 ? 22 : 10) *
+ op->ldpc_enc.z_c - op->ldpc_enc.n_filler) >> 3;
+ if (check_bit(op->ldpc_enc.op_flags, RTE_BBDEV_LDPC_CRC_24B_ATTACH))
+ input_len_B -= 3;
+
+ if (r < cab) {
+ num_a = cab - r;
+ num_b = cbs_in_tb - cab;
+ } else {
+ num_a = 0;
+ num_b = cbs_in_tb - r;
+ }
+ uint32_t in_offset = 0, out_offset = 0;
+
+ while (num_a > 0) {
+ uint32_t e = op->ldpc_enc.tb_params.ea;
+ uint32_t out_len_B = (e + 7) >> 3;
+ uint8_t enq = RTE_MIN(num_a, ACC100_MUX_5GDL_DESC);
+ num_a -= enq;
+ enqueue_ldpc_enc_part_tb(q, op, enq_descs, enq, e, input_len_B,
+ out_len_B, &in_offset, &out_offset);
+ enq_descs++;
+ }
+ while (num_b > 0) {
+ uint32_t e = op->ldpc_enc.tb_params.eb;
+ uint32_t out_len_B = (e + 7) >> 3;
+ uint8_t enq = RTE_MIN(num_b, ACC100_MUX_5GDL_DESC);
+ num_b -= enq;
+ enqueue_ldpc_enc_part_tb(q, op, enq_descs, enq, e, input_len_B,
+ out_len_B, &in_offset, &out_offset);
+ enq_descs++;
+ }
+
+ uint16_t return_descs = enq_descs - init_enq_descs;
+ /* Keep total number of CBs in first TB */
+ desc_idx = ((q->sw_ring_head + init_enq_descs)
+ & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+ desc->req.cbs_in_tb = return_descs; /** Actual number of descriptors */
+ desc->req.op_addr = op;
+
+ /* Set SDone on last CB descriptor for TB mode. */
+ desc_idx = ((q->sw_ring_head + enq_descs - 1)
+ & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+ desc->req.sdone_enable = 1;
+ desc->req.irq_enable = q->irq_enable;
+ desc->req.op_addr = op;
+ return return_descs;
+}
+
#ifndef RTE_LIBRTE_BBDEV_SKIP_VALIDATE
/* Validates turbo decoder parameters */
static inline int
@@ -3302,7 +3427,10 @@ enqueue_dec_one_op_tb(struct acc100_queue *q, struct rte_bbdev_dec_op *op,
uint16_t current_enqueued_cbs = 0;
#ifndef RTE_LIBRTE_BBDEV_SKIP_VALIDATE
- /* Validate op structure */
+ if (cbs_in_tb == 0) {
+ rte_bbdev_log(ERR, "Turbo decoder invalid number of CBs");
+ return -EINVAL;
+ }
if (validate_dec_op(op, q) == -1) {
rte_bbdev_log(ERR, "Turbo decoder validation rejected");
return -EINVAL;
@@ -3389,6 +3517,32 @@ enqueue_dec_one_op_tb(struct acc100_queue *q, struct rte_bbdev_dec_op *op,
return current_enqueued_cbs;
}
+/* Calculates number of CBs in processed encoder TB based on 'r' and input
+ * length.
+ */
+static inline uint8_t
+get_num_cbs_in_tb_ldpc_enc(struct rte_bbdev_op_ldpc_enc *ldpc_enc)
+{
+ uint8_t c, r, crc24_bits = 0;
+ uint16_t k = (ldpc_enc->basegraph == 1 ? 22 : 10) * ldpc_enc->z_c
+ - ldpc_enc->n_filler;
+ uint8_t cbs_in_tb = 0;
+ int32_t length;
+
+ length = ldpc_enc->input.length;
+ r = ldpc_enc->tb_params.r;
+ c = ldpc_enc->tb_params.c;
+ crc24_bits = 0;
+ if (check_bit(ldpc_enc->op_flags, RTE_BBDEV_LDPC_CRC_24B_ATTACH))
+ crc24_bits = 24;
+ while (length > 0 && r < c) {
+ length -= (k - crc24_bits) >> 3;
+ r++;
+ cbs_in_tb++;
+ }
+ return cbs_in_tb;
+}
+
/* Calculates number of CBs in processed encoder TB based on 'r' and input
* length.
*/
@@ -3670,6 +3824,45 @@ acc100_enqueue_enc_tb(struct rte_bbdev_queue_data *q_data,
return i;
}
+/* Enqueue LDPC encode operations for ACC100 device in TB mode. */
+static uint16_t
+acc100_enqueue_ldpc_enc_tb(struct rte_bbdev_queue_data *q_data,
+ struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+ struct acc100_queue *q = q_data->queue_private;
+ int32_t avail = acc100_ring_avail_enq(q);
+ uint16_t i, enqueued_descs = 0;
+ uint8_t cbs_in_tb;
+ int descs_used;
+
+ for (i = 0; i < num; ++i) {
+ cbs_in_tb = get_num_cbs_in_tb_ldpc_enc(&ops[i]->ldpc_enc);
+ /* Check if there are available space for further processing */
+ if (unlikely(avail - cbs_in_tb < 0)) {
+ acc100_enqueue_ring_full(q_data);
+ break;
+ }
+ descs_used = enqueue_ldpc_enc_one_op_tb(q, ops[i],
+ enqueued_descs, cbs_in_tb);
+ if (descs_used < 0) {
+ acc100_enqueue_invalid(q_data);
+ break;
+ }
+ enqueued_descs += descs_used;
+ avail -= descs_used;
+ }
+ if (unlikely(enqueued_descs == 0))
+ return 0; /* Nothing to enqueue */
+
+ acc100_dma_enqueue(q, enqueued_descs, &q_data->queue_stats);
+
+ /* Update stats */
+ q_data->queue_stats.enqueued_count += i;
+ q_data->queue_stats.enqueue_err_count += num - i;
+
+ return i;
+}
+
/* Check room in AQ for the enqueues batches into Qmgr */
static int32_t
acc100_aq_avail(struct rte_bbdev_queue_data *q_data, uint16_t num_ops)
@@ -3707,7 +3900,7 @@ acc100_enqueue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
if (unlikely((aq_avail <= 0) || (num == 0)))
return 0;
if (ops[0]->ldpc_enc.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK)
- return acc100_enqueue_enc_tb(q_data, ops, num);
+ return acc100_enqueue_ldpc_enc_tb(q_data, ops, num);
else
return acc100_enqueue_ldpc_enc_cb(q_data, ops, num);
}
--
2.37.1
next prev parent reply other threads:[~2022-08-15 21:58 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-16 5:52 [PATCH v1 00/33] baseband/acc100: changes for 22.11 Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 01/33] baseband/acc100: update dev close function Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 02/33] baseband/acc100: quit queue setup for undef dev Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 03/33] baseband/acc100: add default e value for FCW Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 04/33] baseband/acc100: add LDPC encoder padding function Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 05/33] baseband/acc100: add scatter-gather support Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 06/33] baseband/acc100: add HARQ index helper function Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 07/33] baseband/acc100: avoid mux for small inbound frames Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 08/33] baseband/acc100: separate validation functions from debug Hernan Vargas
2022-08-16 5:52 ` Hernan Vargas [this message]
2022-08-16 5:52 ` [PATCH v1 10/33] baseband/acc10x: limit cases for HARQ pruning Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 11/33] baseband/acc100: update validate LDPC enc/dec Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 12/33] baseband/acc100: add workaround for deRM corner cases Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 13/33] baseband/acc100: enable vf2pf doorbell register Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 14/33] baseband/acc100: add ring companion address Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 15/33] baseband/acc100: configure PMON control registers Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 16/33] baseband/acc100: configurable queue depth Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 17/33] baseband/acc100: add queue stop operation Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 18/33] basbeband/acc100: check turbo dec/enc input Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 19/33] baseband/acc100: check for unlikely operation vals Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 20/33] baseband/acc100: enforce additional check on FCW Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 21/33] baseband/acc100: update uplink CB input length Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 22/33] baseband/acc100: rename ldpc encode function arg Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 23/33] baseband/acc100: update log messages Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 24/33] baseband/acc100: allocate ring/queue mem when NULL Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 25/33] baseband/acc100: store FCW from first CB descriptor Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 26/33] baseband/acc100: remove input error check from enc Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 27/33] baseband/acc100: make desc optimization optional Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 28/33] baseband/acc100: update device info Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 29/33] baseband/acc100: reduce input length for CRC24B Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 30/33] baseband/acc100: initialize ring data value Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 31/33] baseband/acc100: update debug print for LDPC FCW Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 32/33] baseband/acc100: set device min alignment to 1 Hernan Vargas
2022-08-16 5:52 ` [PATCH v1 33/33] baseband/acc100: update meson file sdk dependency Hernan Vargas
2022-08-16 17:16 ` [PATCH v1 00/33] baseband/acc100: changes for 22.11 Tom Rix
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220816055258.107564-10-hernan.vargas@intel.com \
--to=hernan.vargas@intel.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=nicolas.chautru@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).