From: Megha Ajmera <megha.ajmera@intel.com>
To: dev@dpdk.org, jasvinder.singh@intel.com, cristian.dumitrescu@intel.com
Subject: [PATCH] sched: Support to config 100G rate to subport/pipe
Date: Thu, 18 Aug 2022 08:07:29 +0000 [thread overview]
Message-ID: <20220818080729.1455935-1-megha.ajmera@intel.com> (raw)
Currently in hqos tc rates, tb sizes can be configured upto 25G.
Signed-off-by: Megha Ajmera <megha.ajmera@intel.com>
---
examples/qos_sched/cfg_file.c | 64 +++++++++++++++++------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/examples/qos_sched/cfg_file.c b/examples/qos_sched/cfg_file.c
index 450482f07d..cea041e69b 100644
--- a/examples/qos_sched/cfg_file.c
+++ b/examples/qos_sched/cfg_file.c
@@ -62,67 +62,67 @@ cfg_load_pipe(struct rte_cfgfile *cfg, struct rte_sched_pipe_params *pipe_params
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tb rate");
if (entry)
- pipe_params[j].tb_rate = (uint64_t)atoi(entry);
+ pipe_params[j].tb_rate = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tb size");
if (entry)
- pipe_params[j].tb_size = (uint64_t)atoi(entry);
+ pipe_params[j].tb_size = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc period");
if (entry)
- pipe_params[j].tc_period = (uint64_t)atoi(entry);
+ pipe_params[j].tc_period = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 0 rate");
if (entry)
- pipe_params[j].tc_rate[0] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[0] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 1 rate");
if (entry)
- pipe_params[j].tc_rate[1] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[1] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 2 rate");
if (entry)
- pipe_params[j].tc_rate[2] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[2] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 3 rate");
if (entry)
- pipe_params[j].tc_rate[3] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[3] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 4 rate");
if (entry)
- pipe_params[j].tc_rate[4] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[4] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 5 rate");
if (entry)
- pipe_params[j].tc_rate[5] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[5] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 6 rate");
if (entry)
- pipe_params[j].tc_rate[6] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[6] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 7 rate");
if (entry)
- pipe_params[j].tc_rate[7] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[7] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 8 rate");
if (entry)
- pipe_params[j].tc_rate[8] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[8] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 9 rate");
if (entry)
- pipe_params[j].tc_rate[9] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[9] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 10 rate");
if (entry)
- pipe_params[j].tc_rate[10] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[10] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 11 rate");
if (entry)
- pipe_params[j].tc_rate[11] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[11] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 12 rate");
if (entry)
- pipe_params[j].tc_rate[12] = (uint64_t)atoi(entry);
+ pipe_params[j].tc_rate[12] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, pipe_name, "tc 12 oversubscription weight");
if (entry)
@@ -163,67 +163,67 @@ cfg_load_subport_profile(struct rte_cfgfile *cfg,
entry = rte_cfgfile_get_entry(cfg, sec_name, "tb rate");
if (entry)
- subport_profile[i].tb_rate = (uint64_t)atoi(entry);
+ subport_profile[i].tb_rate = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tb size");
if (entry)
- subport_profile[i].tb_size = (uint64_t)atoi(entry);
+ subport_profile[i].tb_size = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc period");
if (entry)
- subport_profile[i].tc_period = (uint64_t)atoi(entry);
+ subport_profile[i].tc_period = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 0 rate");
if (entry)
- subport_profile[i].tc_rate[0] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[0] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 1 rate");
if (entry)
- subport_profile[i].tc_rate[1] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[1] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 2 rate");
if (entry)
- subport_profile[i].tc_rate[2] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[2] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 3 rate");
if (entry)
- subport_profile[i].tc_rate[3] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[3] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 4 rate");
if (entry)
- subport_profile[i].tc_rate[4] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[4] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 5 rate");
if (entry)
- subport_profile[i].tc_rate[5] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[5] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 6 rate");
if (entry)
- subport_profile[i].tc_rate[6] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[6] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 7 rate");
if (entry)
- subport_profile[i].tc_rate[7] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[7] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 8 rate");
if (entry)
- subport_profile[i].tc_rate[8] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[8] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 9 rate");
if (entry)
- subport_profile[i].tc_rate[9] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[9] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 10 rate");
if (entry)
- subport_profile[i].tc_rate[10] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[10] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 11 rate");
if (entry)
- subport_profile[i].tc_rate[11] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[11] = atol(entry);
entry = rte_cfgfile_get_entry(cfg, sec_name, "tc 12 rate");
if (entry)
- subport_profile[i].tc_rate[12] = (uint64_t)atoi(entry);
+ subport_profile[i].tc_rate[12] = atol(entry);
}
return 0;
--
2.25.1
reply other threads:[~2022-08-18 8:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220818080729.1455935-1-megha.ajmera@intel.com \
--to=megha.ajmera@intel.com \
--cc=cristian.dumitrescu@intel.com \
--cc=dev@dpdk.org \
--cc=jasvinder.singh@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).