[PATCH v2 07/37] baseband/acc100: add LDPC encoder padding function

[Hernan Vargas <hernan.vargas@intel.com>]

LDPC Encoder input may need to be padded to avoid small beat for ACC100.
Padding 5GDL input buffer length (BLEN) to avoid case (BLEN % 64) <= 8.
Adding protection for corner case to avoid for 5GDL occurrence of last
beat within the ACC100 fabric with <= 8B which might trigger a fabric
corner case hang issue.

Signed-off-by: Hernan Vargas <hernan.vargas@intel.com>
---
 drivers/baseband/acc100/rte_acc100_pmd.c | 28 ++++++++++++++----------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c b/drivers/baseband/acc100/rte_acc100_pmd.c
index cc7d146e74..4849d822d1 100644
--- a/drivers/baseband/acc100/rte_acc100_pmd.c
+++ b/drivers/baseband/acc100/rte_acc100_pmd.c
@@ -1304,7 +1304,6 @@ acc100_fcw_td_fill(const struct rte_bbdev_dec_op *op, struct acc100_fcw_td *fcw)
 			RTE_BBDEV_TURBO_HALF_ITERATION_EVEN);
 }
 
-#ifdef RTE_LIBRTE_BBDEV_DEBUG
 
 static inline bool
 is_acc100(struct acc100_queue *q)
@@ -1317,7 +1316,6 @@ validate_op_required(struct acc100_queue *q)
 {
 	return is_acc100(q);
 }
-#endif
 
 /* Fill in a frame control word for LDPC decoding. */
 static inline void
@@ -1773,12 +1771,24 @@ acc100_dma_desc_te_fill(struct rte_bbdev_enc_op *op,
 	return 0;
 }
 
+/* May need to pad LDPC Encoder input to avoid small beat for ACC100 */
+static inline uint16_t
+pad_le_in(uint16_t blen, struct acc100_queue *q)
+{
+	if (!is_acc100(q))
+		return blen;
+	uint16_t last_beat = blen % 64;
+	if ((last_beat > 0) && (last_beat <= 8))
+		blen += 8;
+	return blen;
+}
+
 static inline int
 acc100_dma_desc_le_fill(struct rte_bbdev_enc_op *op,
 		struct acc100_dma_req_desc *desc, struct rte_mbuf **input,
 		struct rte_mbuf *output, uint32_t *in_offset,
 		uint32_t *out_offset, uint32_t *out_length,
-		uint32_t *mbuf_total_left, uint32_t *seg_total_left)
+		uint32_t *mbuf_total_left, uint32_t *seg_total_left, struct acc100_queue *q)
 {
 	int next_triplet = 1; /* FCW already done */
 	uint16_t K, in_length_in_bits, in_length_in_bytes;
@@ -1802,8 +1812,7 @@ acc100_dma_desc_le_fill(struct rte_bbdev_enc_op *op,
 	}
 
 	next_triplet = acc100_dma_fill_blk_type_in(desc, input, in_offset,
-			in_length_in_bytes,
-			seg_total_left, next_triplet);
+			pad_le_in(in_length_in_bytes, q), seg_total_left, next_triplet);
 	if (unlikely(next_triplet < 0)) {
 		rte_bbdev_log(ERR,
 				"Mismatch between data to process and mbuf data length in bbdev_op: %p",
@@ -2531,7 +2540,7 @@ enqueue_ldpc_enc_n_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op **ops,
 	acc100_header_init(&desc->req);
 	desc->req.numCBs = num;
 
-	in_length_in_bytes = ops[0]->ldpc_enc.input.data->data_len;
+	in_length_in_bytes = pad_le_in(ops[0]->ldpc_enc.input.data->data_len, q);
 	out_length = (enc->cb_params.e + 7) >> 3;
 	desc->req.m2dlen = 1 + num;
 	desc->req.d2mlen = num;
@@ -2600,7 +2609,7 @@ enqueue_ldpc_enc_one_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op *op,
 
 	ret = acc100_dma_desc_le_fill(op, &desc->req, &input, output,
 			&in_offset, &out_offset, &out_length, &mbuf_total_left,
-			&seg_total_left);
+			&seg_total_left, q);
 
 	if (unlikely(ret < 0))
 		return ret;
@@ -3921,9 +3930,6 @@ dequeue_enc_one_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op **ref_op,
 
 	/* Clearing status, it will be set based on response */
 	op->status = 0;
-
-	op->status |= ((rsp.input_err)
-			? (1 << RTE_BBDEV_DATA_ERROR) : 0);
 	op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
 	op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
 
@@ -3994,8 +4000,6 @@ dequeue_enc_one_op_tb(struct acc100_queue *q, struct rte_bbdev_enc_op **ref_op,
 		rte_bbdev_log_debug("Resp. desc %p: %x", desc,
 				rsp.val);
 
-		op->status |= ((rsp.input_err)
-				? (1 << RTE_BBDEV_DATA_ERROR) : 0);
 		op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
 		op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
 
-- 
2.37.1