DPDK patches and discussions
 help / color / mirror / Atom feed
From: Michael Baum <michaelba@nvidia.com>
To: <dev@dpdk.org>
Cc: Matan Azrad <matan@nvidia.com>,
	Raslan Darawsheh <rasland@nvidia.com>,
	"Ori Kam" <orika@nvidia.com>
Subject: [PATCH 3/3] ethdev: add structure for indirect AGE update
Date: Wed, 21 Sep 2022 17:54:09 +0300	[thread overview]
Message-ID: <20220921145409.511328-4-michaelba@nvidia.com> (raw)
In-Reply-To: <20220921145409.511328-1-michaelba@nvidia.com>

Add a new structure for indirect AGE update.

This new structure enables:
1. Update timeout value.
2. Stop AGE checking.
3. Start AGE checking.
4. restart AGE checking.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
---
 app/test-pmd/cmdline_flow.c        | 66 ++++++++++++++++++++++++++++++
 app/test-pmd/config.c              | 18 +++++++-
 doc/guides/prog_guide/rte_flow.rst | 25 +++++++++--
 lib/ethdev/rte_flow.h              | 27 ++++++++++++
 4 files changed, 132 insertions(+), 4 deletions(-)

diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 4fb90a92cb..a315fd9ded 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -583,6 +583,9 @@ enum index {
 	ACTION_SET_IPV6_DSCP_VALUE,
 	ACTION_AGE,
 	ACTION_AGE_TIMEOUT,
+	ACTION_AGE_UPDATE,
+	ACTION_AGE_UPDATE_TIMEOUT,
+	ACTION_AGE_UPDATE_TOUCH,
 	ACTION_SAMPLE,
 	ACTION_SAMPLE_RATIO,
 	ACTION_SAMPLE_INDEX,
@@ -1869,6 +1872,7 @@ static const enum index next_action[] = {
 	ACTION_SET_IPV4_DSCP,
 	ACTION_SET_IPV6_DSCP,
 	ACTION_AGE,
+	ACTION_AGE_UPDATE,
 	ACTION_SAMPLE,
 	ACTION_INDIRECT,
 	ACTION_MODIFY_FIELD,
@@ -2113,6 +2117,14 @@ static const enum index action_age[] = {
 	ZERO,
 };
 
+static const enum index action_age_update[] = {
+	ACTION_AGE_UPDATE,
+	ACTION_AGE_UPDATE_TIMEOUT,
+	ACTION_AGE_UPDATE_TOUCH,
+	ACTION_NEXT,
+	ZERO,
+};
+
 static const enum index action_sample[] = {
 	ACTION_SAMPLE,
 	ACTION_SAMPLE_RATIO,
@@ -2191,6 +2203,9 @@ static int parse_vc_spec(struct context *, const struct token *,
 			 const char *, unsigned int, void *, unsigned int);
 static int parse_vc_conf(struct context *, const struct token *,
 			 const char *, unsigned int, void *, unsigned int);
+static int parse_vc_conf_timeout(struct context *, const struct token *,
+				 const char *, unsigned int, void *,
+				 unsigned int);
 static int parse_vc_item_ecpri_type(struct context *, const struct token *,
 				    const char *, unsigned int,
 				    void *, unsigned int);
@@ -6194,6 +6209,30 @@ static const struct token token_list[] = {
 		.next = NEXT(action_age, NEXT_ENTRY(COMMON_UNSIGNED)),
 		.call = parse_vc_conf,
 	},
+	[ACTION_AGE_UPDATE] = {
+		.name = "age_update",
+		.help = "update aging parameter",
+		.next = NEXT(action_age_update),
+		.priv = PRIV_ACTION(AGE,
+				    sizeof(struct rte_flow_update_age)),
+		.call = parse_vc,
+	},
+	[ACTION_AGE_UPDATE_TIMEOUT] = {
+		.name = "timeout",
+		.help = "age timeout update value",
+		.args = ARGS(ARGS_ENTRY_BF(struct rte_flow_update_age,
+					   timeout, 24)),
+		.next = NEXT(action_age_update, NEXT_ENTRY(COMMON_UNSIGNED)),
+		.call = parse_vc_conf_timeout,
+	},
+	[ACTION_AGE_UPDATE_TOUCH] = {
+		.name = "touch",
+		.help = "this flow is touched",
+		.next = NEXT(action_age_update, NEXT_ENTRY(COMMON_BOOLEAN)),
+		.args = ARGS(ARGS_ENTRY_BF(struct rte_flow_update_age,
+					   touch, 1)),
+		.call = parse_vc_conf,
+	},
 	[ACTION_SAMPLE] = {
 		.name = "sample",
 		.help = "set a sample action",
@@ -7031,6 +7070,33 @@ parse_vc_conf(struct context *ctx, const struct token *token,
 	return len;
 }
 
+/** Parse action configuration field. */
+static int
+parse_vc_conf_timeout(struct context *ctx, const struct token *token,
+		      const char *str, unsigned int len,
+		      void *buf, unsigned int size)
+{
+	struct buffer *out = buf;
+	struct rte_flow_update_age *update;
+
+	(void)size;
+	if (ctx->curr != ACTION_AGE_UPDATE_TIMEOUT)
+		return -1;
+	/* Token name must match. */
+	if (parse_default(ctx, token, str, len, NULL, 0) < 0)
+		return -1;
+	/* Nothing else to do if there is no buffer. */
+	if (!out)
+		return len;
+	/* Point to selected object. */
+	ctx->object = out->args.vc.data;
+	ctx->objmask = NULL;
+	/* Update the timeout is valid. */
+	update = (struct rte_flow_update_age *)out->args.vc.data;
+	update->timeout_valid = 1;
+	return len;
+}
+
 /** Parse eCPRI common header type field. */
 static int
 parse_vc_item_ecpri_type(struct context *ctx, const struct token *token,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 31952467fb..45495385d7 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2065,6 +2065,7 @@ port_action_handle_update(portid_t port_id, uint32_t id,
 	if (!pia)
 		return -EINVAL;
 	switch (pia->type) {
+	case RTE_FLOW_ACTION_TYPE_AGE:
 	case RTE_FLOW_ACTION_TYPE_CONNTRACK:
 		update = action->conf;
 		break;
@@ -2904,6 +2905,8 @@ port_queue_action_handle_update(portid_t port_id,
 	struct rte_port *port;
 	struct rte_flow_error error;
 	struct rte_flow_action_handle *action_handle;
+	struct port_indirect_action *pia;
+	const void *update;
 
 	action_handle = port_action_handle_get_by_id(port_id, id);
 	if (!action_handle)
@@ -2915,8 +2918,21 @@ port_queue_action_handle_update(portid_t port_id,
 		return -EINVAL;
 	}
 
+	pia = action_get_by_id(port_id, id);
+	if (!pia)
+		return -EINVAL;
+
+	switch (pia->type) {
+	case RTE_FLOW_ACTION_TYPE_AGE:
+		update = action->conf;
+		break;
+	default:
+		update = action;
+		break;
+	}
+
 	if (rte_flow_async_action_handle_update(port_id, queue_id, &attr,
-				    action_handle, action, NULL, &error)) {
+				    action_handle, update, NULL, &error)) {
 		return port_flow_complain(&error);
 	}
 	printf("Indirect action #%u update queued\n", id);
diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index 588914b231..dae9121279 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -2958,7 +2958,7 @@ Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
 Action: ``AGE``
 ^^^^^^^^^^^^^^^
 
-Set ageing timeout configuration to a flow.
+Set aging timeout configuration to a flow.
 
 Event RTE_ETH_EVENT_FLOW_AGED will be reported if
 timeout passed without any matching on the flow.
@@ -2977,8 +2977,8 @@ timeout passed without any matching on the flow.
    | ``context``  | user input flow context         |
    +--------------+---------------------------------+
 
-Query structure to retrieve ageing status information of a
-shared AGE action, or a flow rule using the AGE action:
+Query structure to retrieve aging status information of an
+indirect AGE action, or a flow rule using the AGE action:
 
 .. _table_rte_flow_query_age:
 
@@ -2994,6 +2994,25 @@ shared AGE action, or a flow rule using the AGE action:
    | ``sec_since_last_hit``       | out | Seconds since last traffic hit         |
    +------------------------------+-----+----------------------------------------+
 
+Update structure to modify the parameters of an indirect AGE action.
+The update structure is used by ``rte_flow_action_handle_update()`` function.
+
+.. _table_rte_flow_update_age:
+
+.. table:: AGE update
+
+   +-------------------+--------------------------------------------------------------+
+   | Field             | Value                                                        |
+   +===================+==============================================================+
+   | ``timeout``       | 24 bits timeout value                                        |
+   +-------------------+--------------------------------------------------------------+
+   | ``timeout_valid`` | 1 bit, timeout value is valid                                |
+   +-------------------+--------------------------------------------------------------+
+   | ``touch``         | 1 bit, touch the AGE action to set ``sec_since_last_hit`` 0  |
+   +-------------------+--------------------------------------------------------------+
+   | ``reserved``      | 6 bits reserved, must be zero                                |
+   +-------------------+--------------------------------------------------------------+
+
 Action: ``SAMPLE``
 ^^^^^^^^^^^^^^^^^^
 
diff --git a/lib/ethdev/rte_flow.h b/lib/ethdev/rte_flow.h
index d830b02321..a21d437cf8 100644
--- a/lib/ethdev/rte_flow.h
+++ b/lib/ethdev/rte_flow.h
@@ -2954,6 +2954,33 @@ struct rte_flow_query_age {
 	uint32_t sec_since_last_hit:24; /**< Seconds since last traffic hit. */
 };
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ACTION_TYPE_AGE
+ *
+ * Update indirect AGE action attributes:
+ *  - Timeout can be updated including stop/start action:
+ *     +-------------+-------------+------------------------------+
+ *     | Old Timeout | New Timeout | Updating                     |
+ *     +=============+=============+==============================+
+ *     | 0           | positive    | Start aging with new value   |
+ *     +-------------+-------------+------------------------------+
+ *     | positive    | 0           | Stop aging			  |
+ *     +-------------+-------------+------------------------------+
+ *     | positive    | positive    | Change timeout to new value  |
+ *     +-------------+-------------+------------------------------+
+ *  - sec_since_last_hit can be reset.
+ */
+struct rte_flow_update_age {
+	uint32_t reserved:6; /**< Reserved, must be zero. */
+	uint32_t timeout_valid:1; /**< The timeout is valid for update. */
+	uint32_t timeout:24; /**< Time in seconds. */
+	uint32_t touch:1;
+	/**< Means that aging should assume packet passed the aging. */
+};
+
 /**
  * @warning
  * @b EXPERIMENTAL: this structure may change without prior notice
-- 
2.25.1


  parent reply	other threads:[~2022-09-21 14:54 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-21 14:54 [PATCH 0/3] ethdev: AGE action preparation Michael Baum
2022-09-21 14:54 ` [PATCH 1/3] ethdev: add strict queue to pre-configuration flow hints Michael Baum
2022-09-29 12:04   ` Ori Kam
2022-09-21 14:54 ` [PATCH 2/3] ethdev: add queue-based API to report aged flow rules Michael Baum
2022-09-29 12:04   ` Ori Kam
2022-09-21 14:54 ` Michael Baum [this message]
2022-09-29 12:39   ` [PATCH 3/3] ethdev: add structure for indirect AGE update Ori Kam
2022-10-03  8:03   ` Andrew Rybchenko
2022-10-03  8:30     ` Ori Kam
2022-10-03 13:17       ` Andrew Rybchenko
2022-10-03 15:13         ` Ori Kam
2022-10-04  6:36           ` Andrew Rybchenko
2022-10-19 13:09             ` Michael Baum
2022-09-29  8:40 ` [PATCH 0/3] ethdev: AGE action preparation Andrew Rybchenko
2022-10-19 13:12 ` [PATCH v2 " Michael Baum
2022-10-19 13:12   ` [PATCH v2 1/3] ethdev: add strict queue to pre-configuration flow hints Michael Baum
2022-10-19 13:12   ` [PATCH v2 2/3] ethdev: add queue-based API to report aged flow rules Michael Baum
2022-10-19 13:12   ` [PATCH v2 3/3] ethdev: add structure for indirect AGE update Michael Baum
2022-10-19 14:49   ` [PATCH v3 0/3] ethdev: AGE action preparation Michael Baum
2022-10-19 14:49     ` [PATCH v3 1/3] ethdev: add strict queue to pre-configuration flow hints Michael Baum
2022-10-26 19:10       ` Andrew Rybchenko
2022-10-19 14:49     ` [PATCH v3 2/3] ethdev: add queue-based API to report aged flow rules Michael Baum
2022-10-26 19:15       ` Andrew Rybchenko
2022-10-26 21:17         ` Michael Baum
2022-10-19 14:49     ` [PATCH v3 3/3] ethdev: add structure for indirect AGE update Michael Baum
2022-10-26 19:18       ` Andrew Rybchenko
2022-10-26 21:19         ` Michael Baum
2022-10-26 21:49     ` [PATCH v4 0/3] ethdev: AGE action preparation Michael Baum
2022-10-26 21:49       ` [PATCH v4 1/3] ethdev: add strict queue to pre-configuration flow hints Michael Baum
2022-10-26 21:49       ` [PATCH v4 2/3] ethdev: add queue-based API to report aged flow rules Michael Baum
2022-10-26 21:49       ` [PATCH v4 3/3] ethdev: add structure for indirect AGE update Michael Baum
2022-10-28 10:56       ` [PATCH v4 0/3] ethdev: AGE action preparation Andrew Rybchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220921145409.511328-4-michaelba@nvidia.com \
    --to=michaelba@nvidia.com \
    --cc=dev@dpdk.org \
    --cc=matan@nvidia.com \
    --cc=orika@nvidia.com \
    --cc=rasland@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).