From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id B38FDA0540; Fri, 7 Oct 2022 21:04:16 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id DC9D24281C; Fri, 7 Oct 2022 21:03:51 +0200 (CEST) Received: from mga06.intel.com (mga06b.intel.com [134.134.136.31]) by mails.dpdk.org (Postfix) with ESMTP id 9054040042 for ; Fri, 7 Oct 2022 21:03:48 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1665169428; x=1696705428; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=Y+PtyhRZgkNIoZANJaBzgWb+L1tuiD5FFNbfGzx2BKM=; b=DPhxxKncmxt6x8iNZApe/3y0K/G9/FiP9ell4F1HQqE7vHrtCHQgshCN MR0Cfjw6ib0SMpmoOWBD4oyeN64XJcXw3ePO3EOiWCKYu8Bmggyn6UYSb mJoZ3tMJynGshWK6UmSvUnm5jENwQT15idPtUY0tMVIHBzB+LyXe/Vyir t5Mi4hVoU09dIbefzwl+q33Tatr096xuYKY+neneETVE1+wKlF56cKe8S FaaQAS5pdUME+zvL6oU7F1MXPfm+zMGLQFkpA19UXR3URqJChFLu92itv DS541qhJC8h23B9h3Y3OyNWeUxzpmWv3H3JBZwFtkbCRzqlv5pDR/laFf A==; X-IronPort-AV: E=McAfee;i="6500,9779,10493"; a="365758265" X-IronPort-AV: E=Sophos;i="5.95,167,1661842800"; d="scan'208";a="365758265" Received: from fmsmga006.fm.intel.com ([10.253.24.20]) by orsmga104.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 07 Oct 2022 12:03:46 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=McAfee;i="6500,9779,10493"; a="870394166" X-IronPort-AV: E=Sophos;i="5.95,167,1661842800"; d="scan'208";a="870394166" Received: from unknown (HELO icx-npg-scs1-cp1.localdomain) ([10.233.180.245]) by fmsmga006.fm.intel.com with ESMTP; 07 Oct 2022 12:03:45 -0700 From: Nicolas Chautru To: dev@dpdk.org, gakhil@marvell.com, maxime.coquelin@redhat.com Cc: trix@redhat.com, mdr@ashroe.eu, bruce.richardson@intel.com, hemant.agrawal@nxp.com, david.marchand@redhat.com, stephen@networkplumber.org, hernan.vargas@intel.com, Nicolas Chautru Subject: [PATCH v8 04/14] baseband/acc: introduce PMD for ACC200 Date: Fri, 7 Oct 2022 12:03:19 -0700 Message-Id: <20221007190329.25381-5-nicolas.chautru@intel.com> X-Mailer: git-send-email 2.37.1 In-Reply-To: <20221007190329.25381-1-nicolas.chautru@intel.com> References: <20221007190329.25381-1-nicolas.chautru@intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Introduced stubs for device driver for the ACC200 integrated VRAN accelerator on SPR-EEC Signed-off-by: Nicolas Chautru Reviewed-by: Maxime Coquelin --- MAINTAINERS | 3 + doc/guides/bbdevs/acc200.rst | 257 +++++++++++++++++++++++++ doc/guides/bbdevs/features/acc200.ini | 14 ++ doc/guides/bbdevs/features/default.ini | 1 + doc/guides/bbdevs/index.rst | 1 + doc/guides/rel_notes/release_22_11.rst | 6 + drivers/baseband/acc/acc200_pmd.h | 32 +++ drivers/baseband/acc/meson.build | 2 +- drivers/baseband/acc/rte_acc200_pmd.c | 143 ++++++++++++++ 9 files changed, 458 insertions(+), 1 deletion(-) create mode 100644 doc/guides/bbdevs/acc200.rst create mode 100644 doc/guides/bbdevs/features/acc200.ini create mode 100644 drivers/baseband/acc/acc200_pmd.h create mode 100644 drivers/baseband/acc/rte_acc200_pmd.c diff --git a/MAINTAINERS b/MAINTAINERS index 0cfaa38774..24f418637c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1343,6 +1343,9 @@ F: drivers/baseband/acc/ F: doc/guides/bbdevs/acc100.rst F: doc/guides/bbdevs/features/acc100.ini F: doc/guides/bbdevs/features/acc101.ini +F: drivers/baseband/acc200/ +F: doc/guides/bbdevs/acc200.rst +F: doc/guides/bbdevs/features/acc200.ini Null baseband M: Nicolas Chautru diff --git a/doc/guides/bbdevs/acc200.rst b/doc/guides/bbdevs/acc200.rst new file mode 100644 index 0000000000..33c4fa9544 --- /dev/null +++ b/doc/guides/bbdevs/acc200.rst @@ -0,0 +1,257 @@ +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2022 Intel Corporation + +Intel(R) ACC200 vRAN Dedicated Accelerator Poll Mode Driver +=========================================================== + +The IntelĀ® vRAN Dedicated Accelerator ACC200 peripheral enables cost-effective +4G and 5G next-generation virtualized Radio Access Network (vRAN) solutions +integrated on Sapphire Rapids Edge Enhanced Processor (SPR-EE) +Intel(R)7 based Xeon(R) multi-core server processor. + +Features +-------- + +The ACC200 includes a 5G Low Density Parity Check (LDPC) encoder/decoder, +rate match/dematch, Hybrid Automatic Repeat Request (HARQ) with access to DDR +memory for buffer management, a 4G Turbo encoder/decoder, a +Fast Fourier Transform (FFT) block providing DFT/iDFT processing offload +for the 5G Sounding Reference Signal (SRS), a Queue Manager (QMGR), and +a DMA subsystem. +There is no dedicated on-card memory for HARQ, this is using coherent memory +on the CPU side. + +These correspond to the following features exposed by the PMD: + +- LDPC Encode in the Downlink (5GNR) +- LDPC Decode in the Uplink (5GNR) +- Turbo Encode in the Downlink (4G) +- Turbo Decode in the Uplink (4G) +- FFT processing +- SR-IOV with 16 VFs per PF +- Maximum of 256 queues per VF +- MSI + +ACC200 PMD supports the following BBDEV capabilities: + +* For the LDPC encode operation: + - ``RTE_BBDEV_LDPC_CRC_24B_ATTACH`` : set to attach CRC24B to CB(s). + - ``RTE_BBDEV_LDPC_RATE_MATCH`` : if set then do not do Rate Match bypass. + - ``RTE_BBDEV_LDPC_INTERLEAVER_BYPASS`` : if set then bypass interleaver. + +* For the LDPC decode operation: + - ``RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK`` : check CRC24B from CB(s). + - ``RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP`` : drops CRC24B bits appended while decoding. + - ``RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK`` : check CRC24A from CB(s). + - ``RTE_BBDEV_LDPC_CRC_TYPE_16_CHECK`` : check CRC16 from CB(s). + - ``RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE`` : provides an input for HARQ combining. + - ``RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE`` : provides an input for HARQ combining. + - ``RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE`` : disable early termination. + - ``RTE_BBDEV_LDPC_DEC_SCATTER_GATHER`` : supports scatter-gather for input/output data. + - ``RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION`` : supports compression of the HARQ input/output. + - ``RTE_BBDEV_LDPC_LLR_COMPRESSION`` : supports LLR input compression. + +* For the turbo encode operation: + - ``RTE_BBDEV_TURBO_CRC_24B_ATTACH`` : set to attach CRC24B to CB(s). + - ``RTE_BBDEV_TURBO_RATE_MATCH`` : if set then do not do Rate Match bypass. + - ``RTE_BBDEV_TURBO_ENC_INTERRUPTS`` : set for encoder dequeue interrupts. + - ``RTE_BBDEV_TURBO_RV_INDEX_BYPASS`` : set to bypass RV index. + - ``RTE_BBDEV_TURBO_ENC_SCATTER_GATHER`` : supports scatter-gather for input/output data. + +* For the turbo decode operation: + - ``RTE_BBDEV_TURBO_CRC_TYPE_24B`` : check CRC24B from CB(s). + - ``RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE`` : perform subblock de-interleave. + - ``RTE_BBDEV_TURBO_DEC_INTERRUPTS`` : set for decoder dequeue interrupts. + - ``RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN`` : set if negative LLR input is supported. + - ``RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP`` : keep CRC24B bits appended while decoding. + - ``RTE_BBDEV_TURBO_DEC_CRC_24B_DROP`` : option to drop the code block CRC after decoding. + - ``RTE_BBDEV_TURBO_EARLY_TERMINATION`` : set early termination feature. + - ``RTE_BBDEV_TURBO_DEC_SCATTER_GATHER`` : supports scatter-gather for input/output data. + - ``RTE_BBDEV_TURBO_HALF_ITERATION_EVEN`` : set half iteration granularity. + - ``RTE_BBDEV_TURBO_SOFT_OUTPUT`` : set the APP LLR soft output. + - ``RTE_BBDEV_TURBO_EQUALIZER`` : set the turbo equalizer feature. + - ``RTE_BBDEV_TURBO_SOFT_OUT_SATURATE`` : set the soft output saturation. + - ``RTE_BBDEV_TURBO_CONTINUE_CRC_MATCH`` : set to run an extra odd iteration after CRC match. + - ``RTE_BBDEV_TURBO_NEG_LLR_1_BIT_SOFT_OUT`` : set if negative APP LLR output supported. + - ``RTE_BBDEV_TURBO_MAP_DEC`` : supports flexible parallel MAP engine decoding. + +* For the FFT operation: + - ``RTE_BBDEV_FFT_WINDOWING`` : flexible windowing capability. + - ``RTE_BBDEV_FFT_CS_ADJUSTMENT`` : flexible adjustment of Cyclic Shift time offset. + - ``RTE_BBDEV_FFT_DFT_BYPASS`` : set for bypass the DFT and get directly into iDFT input. + - ``RTE_BBDEV_FFT_IDFT_BYPASS`` : set for bypass the IDFT and get directly the DFT output. + - ``RTE_BBDEV_FFT_WINDOWING_BYPASS`` : set for bypass time domain windowing. + +Installation +------------ + +Section 3 of the DPDK manual provides instructions on installing and compiling DPDK. + +DPDK requires hugepages to be configured as detailed in section 2 of the DPDK manual. +The bbdev test application has been tested with a configuration 40 x 1GB hugepages. +The hugepage configuration of a server may be examined using: + +.. code-block:: console + + grep Huge* /proc/meminfo + + +Initialization +-------------- + +When the device first powers up, its PCI Physical Functions (PF) can be listed +through these commands for ACC200: + +.. code-block:: console + + sudo lspci -vd8086:57c0 + +The physical and virtual functions are compatible with Linux UIO drivers: +``vfio`` and ``igb_uio``. However, in order to work the 5G/4G +FEC device first needs to be bound to one of these linux drivers through DPDK. + + +Bind PF UIO driver(s) +~~~~~~~~~~~~~~~~~~~~~ + +Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use +``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver. + +The igb_uio driver may be bound to the PF PCI device using one of two methods +for ACC200: + + +1. PCI functions (physical or virtual, depending on the use case) can be bound +to the UIO driver by repeating this command for every function. + +.. code-block:: console + + cd + insmod ./build/kmod/igb_uio.ko + echo "8086 57c0" > /sys/bus/pci/drivers/igb_uio/new_id + lspci -vd8086:57c0 + + +2. Another way to bind PF with DPDK UIO driver is by using the ``dpdk-devbind.py`` tool + +.. code-block:: console + + cd + ./usertools/dpdk-devbind.py -b igb_uio 0000:f7:00.0 + +where the PCI device ID (example: 0000:f7:00.0) is obtained using lspci -vd8086:57c0 + + +In a similar way the PF may be bound with vfio-pci as any PCIe device. + + +Enable Virtual Functions +~~~~~~~~~~~~~~~~~~~~~~~~ + +Now, it should be visible in the printouts that PCI PF is under igb_uio control +"``Kernel driver in use: igb_uio``" + +To show the number of available VFs on the device, read ``sriov_totalvfs`` file.. + +.. code-block:: console + + cat /sys/bus/pci/devices/0000\:\:./sriov_totalvfs + + where 0000\:\:. is the PCI device ID + + +To enable VFs via igb_uio, echo the number of virtual functions intended to +enable to ``max_vfs`` file.. + +.. code-block:: console + + echo > /sys/bus/pci/devices/0000\:\:./max_vfs + + +Afterwards, all VFs must be bound to appropriate UIO drivers as required, same +way it was done with the physical function previously. + +Enabling SR-IOV via vfio driver is pretty much the same, except that the file +name is different: + +.. code-block:: console + + echo > /sys/bus/pci/devices/0000\:\:./sriov_numvfs + + +Configure the VFs through PF +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The PCI virtual functions must be configured before working or getting assigned +to VMs/Containers. The configuration involves allocating the number of hardware +queues, priorities, load balance, bandwidth and other settings necessary for the +device to perform FEC functions. + +This configuration needs to be executed at least once after reboot or PCI FLR and can +be achieved by using the functions ``rte_acc200_configure()``, +which sets up the parameters defined in the compatible ``acc200_conf`` structure. + +Test Application +---------------- + +BBDEV provides a test application, ``test-bbdev.py`` and range of test data for testing +the functionality of the device, depending on the device's +capabilities. The test application is located under app->test-bbdev folder and has the +following options: + +.. code-block:: console + + "-p", "--testapp-path": specifies path to the bbdev test app. + "-e", "--eal-params" : EAL arguments which are passed to the test app. + "-t", "--timeout" : Timeout in seconds (default=300). + "-c", "--test-cases" : Defines test cases to run. Run all if not specified. + "-v", "--test-vector" : Test vector path. + "-n", "--num-ops" : Number of operations to process on device (default=32). + "-b", "--burst-size" : Operations enqueue/dequeue burst size (default=32). + "-s", "--snr" : SNR in dB used when generating LLRs for bler tests. + "-s", "--iter_max" : Number of iterations for LDPC decoder. + "-l", "--num-lcores" : Number of lcores to run (default=16). + "-i", "--init-device" : Initialise PF device with default values. + + +To execute the test application tool using simple decode or encode data, +type one of the following: + +.. code-block:: console + + ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_dec_default.data + ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_enc_default.data + + +The test application ``test-bbdev.py``, supports the ability to configure the +PF device with a default set of values, if the "-i" or "- -init-device" option +is included. The default values are defined in test_bbdev_perf.c. + + +Test Vectors +~~~~~~~~~~~~ + +In addition to the simple LDPC decoder and LDPC encoder tests, +bbdev also provides a range of additional tests under the test_vectors folder, +which may be useful. +The results of these tests will depend on the device capabilities which may +cause some testcases to be skipped, but no failure should be reported. + + +Alternate Baseband Device configuration tool +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +On top of the embedded configuration feature supported in test-bbdev using +"- -init-device" option mentioned above, there is also a tool available to +perform that device configuration using a companion application. +The ``pf_bb_config`` application notably enables then to run bbdev-test from +the VF and not only limited to the PF as captured above. + +See for more details: https://github.com/intel/pf-bb-config + +Specifically for the BBDEV ACC200 PMD, the command below can be used: + +.. code-block:: console + + ./pf_bb_config ACC200 -c ./acc200/acc200_config_vf_5g.cfg + ./test-bbdev.py -e="-c 0xff0 -a${VF_PCI_ADDR}" -c validation -n 64 -b 64 -l 1 -v ./ldpc_dec_default.data diff --git a/doc/guides/bbdevs/features/acc200.ini b/doc/guides/bbdevs/features/acc200.ini new file mode 100644 index 0000000000..7319aea726 --- /dev/null +++ b/doc/guides/bbdevs/features/acc200.ini @@ -0,0 +1,14 @@ +; +; Supported features of the 'acc200' bbdev driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Turbo Decoder (4G) = Y +Turbo Encoder (4G) = Y +LDPC Decoder (5G) = Y +LDPC Encoder (5G) = Y +LLR/HARQ Compression = Y +FFT/SRS = Y +External DDR Access = N +HW Accelerated = Y diff --git a/doc/guides/bbdevs/features/default.ini b/doc/guides/bbdevs/features/default.ini index 494be5e400..428ea6a0de 100644 --- a/doc/guides/bbdevs/features/default.ini +++ b/doc/guides/bbdevs/features/default.ini @@ -11,5 +11,6 @@ Turbo Encoder (4G) = LDPC Decoder (5G) = LDPC Encoder (5G) = LLR/HARQ Compression = +FFT/SRS = External DDR Access = HW Accelerated = diff --git a/doc/guides/bbdevs/index.rst b/doc/guides/bbdevs/index.rst index cedd706fa6..4e9dea8e4c 100644 --- a/doc/guides/bbdevs/index.rst +++ b/doc/guides/bbdevs/index.rst @@ -14,4 +14,5 @@ Baseband Device Drivers fpga_lte_fec fpga_5gnr_fec acc100 + acc200 la12xx diff --git a/doc/guides/rel_notes/release_22_11.rst b/doc/guides/rel_notes/release_22_11.rst index 1a9fb32e22..f11e8aee99 100644 --- a/doc/guides/rel_notes/release_22_11.rst +++ b/doc/guides/rel_notes/release_22_11.rst @@ -152,6 +152,12 @@ New Features into single event containing ``rte_event_vector`` whose event type is ``RTE_EVENT_TYPE_CRYPTODEV_VECTOR``. +* **Added Intel ACC200 bbdev PMD.** + + Added a new ``acc200`` bbdev driver for the Intel\ |reg| ACC200 accelerator + integrated on SPR-EE. See the + :doc:`../bbdevs/acc200` BBDEV guide for more details on this new driver. + Removed Items ------------- diff --git a/drivers/baseband/acc/acc200_pmd.h b/drivers/baseband/acc/acc200_pmd.h new file mode 100644 index 0000000000..aaa6b7753c --- /dev/null +++ b/drivers/baseband/acc/acc200_pmd.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2022 Intel Corporation + */ + +#ifndef _RTE_ACC200_PMD_H_ +#define _RTE_ACC200_PMD_H_ + +#include "acc_common.h" + +/* Helper macro for logging */ +#define rte_bbdev_log(level, fmt, ...) \ + rte_log(RTE_LOG_ ## level, acc200_logtype, fmt "\n", \ + ##__VA_ARGS__) + +#ifdef RTE_LIBRTE_BBDEV_DEBUG +#define rte_bbdev_log_debug(fmt, ...) \ + rte_bbdev_log(DEBUG, "acc200_pmd: " fmt, \ + ##__VA_ARGS__) +#else +#define rte_bbdev_log_debug(fmt, ...) +#endif + +/* ACC200 PF and VF driver names */ +#define ACC200PF_DRIVER_NAME intel_acc200_pf +#define ACC200VF_DRIVER_NAME intel_acc200_vf + +/* ACC200 PCI vendor & device IDs */ +#define RTE_ACC200_VENDOR_ID (0x8086) +#define RTE_ACC200_PF_DEVICE_ID (0x57C0) +#define RTE_ACC200_VF_DEVICE_ID (0x57C1) + +#endif /* _RTE_ACC200_PMD_H_ */ diff --git a/drivers/baseband/acc/meson.build b/drivers/baseband/acc/meson.build index 9a1a3b8b07..63912f0621 100644 --- a/drivers/baseband/acc/meson.build +++ b/drivers/baseband/acc/meson.build @@ -3,6 +3,6 @@ deps += ['bbdev', 'bus_vdev', 'ring', 'pci', 'bus_pci'] -sources = files('rte_acc100_pmd.c') +sources = files('rte_acc100_pmd.c', 'rte_acc200_pmd.c') headers = files('rte_acc100_cfg.h') diff --git a/drivers/baseband/acc/rte_acc200_pmd.c b/drivers/baseband/acc/rte_acc200_pmd.c new file mode 100644 index 0000000000..c59cad1d26 --- /dev/null +++ b/drivers/baseband/acc/rte_acc200_pmd.c @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2022 Intel Corporation + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef RTE_BBDEV_OFFLOAD_COST +#include +#endif + +#include +#include +#include "acc200_pmd.h" + +#ifdef RTE_LIBRTE_BBDEV_DEBUG +RTE_LOG_REGISTER_DEFAULT(acc200_logtype, DEBUG); +#else +RTE_LOG_REGISTER_DEFAULT(acc200_logtype, NOTICE); +#endif + +static int +acc200_dev_close(struct rte_bbdev *dev) +{ + RTE_SET_USED(dev); + /* Ensure all in flight HW transactions are completed. */ + usleep(ACC_LONG_WAIT); + return 0; +} + + +static const struct rte_bbdev_ops acc200_bbdev_ops = { + .close = acc200_dev_close, +}; + +/* ACC200 PCI PF address map. */ +static struct rte_pci_id pci_id_acc200_pf_map[] = { + { + RTE_PCI_DEVICE(RTE_ACC200_VENDOR_ID, RTE_ACC200_PF_DEVICE_ID) + }, + {.device_id = 0}, +}; + +/* ACC200 PCI VF address map. */ +static struct rte_pci_id pci_id_acc200_vf_map[] = { + { + RTE_PCI_DEVICE(RTE_ACC200_VENDOR_ID, RTE_ACC200_VF_DEVICE_ID) + }, + {.device_id = 0}, +}; + +/* Initialization Function. */ +static void +acc200_bbdev_init(struct rte_bbdev *dev, struct rte_pci_driver *drv) +{ + struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev->device); + + dev->dev_ops = &acc200_bbdev_ops; + + ((struct acc_device *) dev->data->dev_private)->pf_device = + !strcmp(drv->driver.name, + RTE_STR(ACC200PF_DRIVER_NAME)); + ((struct acc_device *) dev->data->dev_private)->mmio_base = + pci_dev->mem_resource[0].addr; + + rte_bbdev_log_debug("Init device %s [%s] @ vaddr %p paddr %#"PRIx64"", + drv->driver.name, dev->data->name, + (void *)pci_dev->mem_resource[0].addr, + pci_dev->mem_resource[0].phys_addr); +} + +static int acc200_pci_probe(struct rte_pci_driver *pci_drv, + struct rte_pci_device *pci_dev) +{ + struct rte_bbdev *bbdev = NULL; + char dev_name[RTE_BBDEV_NAME_MAX_LEN]; + + if (pci_dev == NULL) { + rte_bbdev_log(ERR, "NULL PCI device"); + return -EINVAL; + } + + rte_pci_device_name(&pci_dev->addr, dev_name, sizeof(dev_name)); + + /* Allocate memory to be used privately by drivers. */ + bbdev = rte_bbdev_allocate(pci_dev->device.name); + if (bbdev == NULL) + return -ENODEV; + + /* allocate device private memory. */ + bbdev->data->dev_private = rte_zmalloc_socket(dev_name, + sizeof(struct acc_device), RTE_CACHE_LINE_SIZE, + pci_dev->device.numa_node); + + if (bbdev->data->dev_private == NULL) { + rte_bbdev_log(CRIT, + "Allocate of %zu bytes for device \"%s\" failed", + sizeof(struct acc_device), dev_name); + rte_bbdev_release(bbdev); + return -ENOMEM; + } + + /* Fill HW specific part of device structure. */ + bbdev->device = &pci_dev->device; + bbdev->intr_handle = pci_dev->intr_handle; + bbdev->data->socket_id = pci_dev->device.numa_node; + + /* Invoke ACC200 device initialization function. */ + acc200_bbdev_init(bbdev, pci_drv); + + rte_bbdev_log_debug("Initialised bbdev %s (id = %u)", + dev_name, bbdev->data->dev_id); + return 0; +} + +static struct rte_pci_driver acc200_pci_pf_driver = { + .probe = acc200_pci_probe, + .remove = acc_pci_remove, + .id_table = pci_id_acc200_pf_map, + .drv_flags = RTE_PCI_DRV_NEED_MAPPING +}; + +static struct rte_pci_driver acc200_pci_vf_driver = { + .probe = acc200_pci_probe, + .remove = acc_pci_remove, + .id_table = pci_id_acc200_vf_map, + .drv_flags = RTE_PCI_DRV_NEED_MAPPING +}; + +RTE_PMD_REGISTER_PCI(ACC200PF_DRIVER_NAME, acc200_pci_pf_driver); +RTE_PMD_REGISTER_PCI_TABLE(ACC200PF_DRIVER_NAME, pci_id_acc200_pf_map); +RTE_PMD_REGISTER_PCI(ACC200VF_DRIVER_NAME, acc200_pci_vf_driver); +RTE_PMD_REGISTER_PCI_TABLE(ACC200VF_DRIVER_NAME, pci_id_acc200_vf_map); -- 2.37.1