From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 4E95EA00C3; Wed, 12 Oct 2022 20:02:05 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 6B24542BF2; Wed, 12 Oct 2022 20:00:22 +0200 (CEST) Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by mails.dpdk.org (Postfix) with ESMTP id BE20D42B91 for ; Wed, 12 Oct 2022 20:00:19 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1665597620; x=1697133620; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=899tigk9h0qhVclOh8kc1/NCSix5ek9tM1V999beZYw=; b=OPSSPtdle9uNJRW8TQi/kBxwq4f5XyUQ4XtlRbqhQ98hDvtR5H7HxqP+ mx67WA/+Sk81ei0p2kD7YmoVIZWS+mGZJSk7KAIkfmX+Y35y/E5LbXSeF lgPNwSA3QcXE1DOYikxEH5LdLTyOPUUtcuyYK+BEn2gtmt6BQy3XuXiYv QYdzahJH78Wei6TbY6+KD7Wwmj3A8f3iZP3c4+vZnIEI9Y1s3LiTRbJdt ON5zU8jBe/0lmaaAOakvJA/2vCI+82+jjxJCYOK2Rv9O3DbXb0Wb6uuwo JWVCzOijDPj58NTIOPwzLCObOXw0/nu+MkLtsrWQ74jmonqY8Ea8XOF0k g==; X-IronPort-AV: E=McAfee;i="6500,9779,10498"; a="292193176" X-IronPort-AV: E=Sophos;i="5.95,179,1661842800"; d="scan'208";a="292193176" Received: from orsmga008.jf.intel.com ([10.7.209.65]) by orsmga101.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 12 Oct 2022 11:00:12 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=McAfee;i="6500,9779,10498"; a="657867387" X-IronPort-AV: E=Sophos;i="5.95,179,1661842800"; d="scan'208";a="657867387" Received: from unknown (HELO icx-npg-scs1-cp1.localdomain) ([10.233.180.245]) by orsmga008.jf.intel.com with ESMTP; 12 Oct 2022 11:00:09 -0700 From: Nicolas Chautru To: dev@dpdk.org, gakhil@marvell.com, maxime.coquelin@redhat.com Cc: trix@redhat.com, mdr@ashroe.eu, bruce.richardson@intel.com, hemant.agrawal@nxp.com, david.marchand@redhat.com, stephen@networkplumber.org, hernan.vargas@intel.com, Nic Chautru Subject: [PATCH v12 13/16] baseband/acc: add PF configure companion function Date: Wed, 12 Oct 2022 10:59:27 -0700 Message-Id: <20221012175930.7560-14-nicolas.chautru@intel.com> X-Mailer: git-send-email 2.37.1 In-Reply-To: <20221012175930.7560-1-nicolas.chautru@intel.com> References: <20221012175930.7560-1-nicolas.chautru@intel.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org From: Nic Chautru Added configure function notably to configure the device from the PF within DPDK and bbdev-test (without external dependency). That function is kept common to all ACC devices. Signed-off-by: Nic Chautru Acked-by: Hernan Vargas --- app/test-bbdev/test_bbdev_perf.c | 74 ++- drivers/baseband/acc/acc100_pmd.h | 2 +- drivers/baseband/acc/acc200_cfg.h | 32 ++ drivers/baseband/acc/acc200_pmd.h | 2 +- drivers/baseband/acc/meson.build | 2 +- drivers/baseband/acc/rte_acc100_pmd.c | 7 +- drivers/baseband/acc/rte_acc200_pmd.c | 458 ++++++++++++++++++ .../acc/{rte_acc100_cfg.h => rte_acc_cfg.h} | 16 +- drivers/baseband/acc/rte_acc_common_cfg.h | 12 +- drivers/baseband/acc/version.map | 2 +- 10 files changed, 585 insertions(+), 22 deletions(-) create mode 100644 drivers/baseband/acc/acc200_cfg.h rename drivers/baseband/acc/{rte_acc100_cfg.h => rte_acc_cfg.h} (67%) diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c index c4bf18d4be..52396f1473 100644 --- a/app/test-bbdev/test_bbdev_perf.c +++ b/app/test-bbdev/test_bbdev_perf.c @@ -54,7 +54,7 @@ #endif #ifdef RTE_BASEBAND_ACC -#include +#include #define ACC100PF_DRIVER_NAME ("intel_acc100_pf") #define ACC100VF_DRIVER_NAME ("intel_acc100_vf") #define ACC100_QMGR_NUM_AQS 16 @@ -63,6 +63,14 @@ #define ACC100_QMGR_INVALID_IDX -1 #define ACC100_QMGR_RR 1 #define ACC100_QOS_GBR 0 +#define ACC200PF_DRIVER_NAME ("intel_acc200_pf") +#define ACC200VF_DRIVER_NAME ("intel_acc200_vf") +#define ACC200_QMGR_NUM_AQS 16 +#define ACC200_QMGR_NUM_QGS 2 +#define ACC200_QMGR_AQ_DEPTH 5 +#define ACC200_QMGR_INVALID_IDX -1 +#define ACC200_QMGR_RR 1 +#define ACC200_QOS_GBR 0 #endif #define OPS_CACHE_SIZE 256U @@ -757,11 +765,73 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info, conf.q_dl_5g.aq_depth_log2 = ACC100_QMGR_AQ_DEPTH; /* setup PF with configuration information */ - ret = rte_acc10x_configure(info->dev_name, &conf); + ret = rte_acc_configure(info->dev_name, &conf); TEST_ASSERT_SUCCESS(ret, "Failed to configure ACC100 PF for bbdev %s", info->dev_name); } + if ((get_init_device() == true) && + (!strcmp(info->drv.driver_name, ACC200PF_DRIVER_NAME))) { + struct rte_acc_conf conf; + unsigned int i; + + printf("Configure ACC200 FEC Driver %s with default values\n", + info->drv.driver_name); + + /* clear default configuration before initialization */ + memset(&conf, 0, sizeof(struct rte_acc_conf)); + + /* Always set in PF mode for built-in configuration */ + conf.pf_mode_en = true; + for (i = 0; i < RTE_ACC_NUM_VFS; ++i) { + conf.arb_dl_4g[i].gbr_threshold1 = ACC200_QOS_GBR; + conf.arb_dl_4g[i].gbr_threshold1 = ACC200_QOS_GBR; + conf.arb_dl_4g[i].round_robin_weight = ACC200_QMGR_RR; + conf.arb_ul_4g[i].gbr_threshold1 = ACC200_QOS_GBR; + conf.arb_ul_4g[i].gbr_threshold1 = ACC200_QOS_GBR; + conf.arb_ul_4g[i].round_robin_weight = ACC200_QMGR_RR; + conf.arb_dl_5g[i].gbr_threshold1 = ACC200_QOS_GBR; + conf.arb_dl_5g[i].gbr_threshold1 = ACC200_QOS_GBR; + conf.arb_dl_5g[i].round_robin_weight = ACC200_QMGR_RR; + conf.arb_ul_5g[i].gbr_threshold1 = ACC200_QOS_GBR; + conf.arb_ul_5g[i].gbr_threshold1 = ACC200_QOS_GBR; + conf.arb_ul_5g[i].round_robin_weight = ACC200_QMGR_RR; + conf.arb_fft[i].gbr_threshold1 = ACC200_QOS_GBR; + conf.arb_fft[i].gbr_threshold1 = ACC200_QOS_GBR; + conf.arb_fft[i].round_robin_weight = ACC200_QMGR_RR; + } + + conf.input_pos_llr_1_bit = true; + conf.output_pos_llr_1_bit = true; + conf.num_vf_bundles = 1; /**< Number of VF bundles to setup */ + + conf.q_ul_4g.num_qgroups = ACC200_QMGR_NUM_QGS; + conf.q_ul_4g.first_qgroup_index = ACC200_QMGR_INVALID_IDX; + conf.q_ul_4g.num_aqs_per_groups = ACC200_QMGR_NUM_AQS; + conf.q_ul_4g.aq_depth_log2 = ACC200_QMGR_AQ_DEPTH; + conf.q_dl_4g.num_qgroups = ACC200_QMGR_NUM_QGS; + conf.q_dl_4g.first_qgroup_index = ACC200_QMGR_INVALID_IDX; + conf.q_dl_4g.num_aqs_per_groups = ACC200_QMGR_NUM_AQS; + conf.q_dl_4g.aq_depth_log2 = ACC200_QMGR_AQ_DEPTH; + conf.q_ul_5g.num_qgroups = ACC200_QMGR_NUM_QGS; + conf.q_ul_5g.first_qgroup_index = ACC200_QMGR_INVALID_IDX; + conf.q_ul_5g.num_aqs_per_groups = ACC200_QMGR_NUM_AQS; + conf.q_ul_5g.aq_depth_log2 = ACC200_QMGR_AQ_DEPTH; + conf.q_dl_5g.num_qgroups = ACC200_QMGR_NUM_QGS; + conf.q_dl_5g.first_qgroup_index = ACC200_QMGR_INVALID_IDX; + conf.q_dl_5g.num_aqs_per_groups = ACC200_QMGR_NUM_AQS; + conf.q_dl_5g.aq_depth_log2 = ACC200_QMGR_AQ_DEPTH; + conf.q_fft.num_qgroups = ACC200_QMGR_NUM_QGS; + conf.q_fft.first_qgroup_index = ACC200_QMGR_INVALID_IDX; + conf.q_fft.num_aqs_per_groups = ACC200_QMGR_NUM_AQS; + conf.q_fft.aq_depth_log2 = ACC200_QMGR_AQ_DEPTH; + + /* setup PF with configuration information */ + ret = rte_acc_configure(info->dev_name, &conf); + TEST_ASSERT_SUCCESS(ret, + "Failed to configure ACC200 PF for bbdev %s", + info->dev_name); + } #endif /* Let's refresh this now this is configured */ rte_bbdev_info_get(dev_id, info); diff --git a/drivers/baseband/acc/acc100_pmd.h b/drivers/baseband/acc/acc100_pmd.h index b325948904..9486e98521 100644 --- a/drivers/baseband/acc/acc100_pmd.h +++ b/drivers/baseband/acc/acc100_pmd.h @@ -7,7 +7,7 @@ #include "acc100_pf_enum.h" #include "acc100_vf_enum.h" -#include "rte_acc100_cfg.h" +#include "rte_acc_cfg.h" #include "acc_common.h" /* Helper macro for logging */ diff --git a/drivers/baseband/acc/acc200_cfg.h b/drivers/baseband/acc/acc200_cfg.h new file mode 100644 index 0000000000..d77506b560 --- /dev/null +++ b/drivers/baseband/acc/acc200_cfg.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2022 Intel Corporation + */ + +#ifndef _ACC200_CFG_H_ +#define _ACC200_CFG_H_ + +/** + * @file acc200_cfg.h + * + * Functions for configuring ACC200 HW. + * Configuration related to encoding/decoding is done through the + * librte_bbdev library. + */ + +/** + * Configure a ACC200 device. + * + * @param dev_name + * The name of the device. This is the short form of PCI BDF, e.g. 00:01.0. + * It can also be retrieved for a bbdev device from the dev_name field in the + * rte_bbdev_info structure returned by rte_bbdev_info_get(). + * @param conf + * Configuration to apply to ACC200 HW. + * + * @return + * Zero on success, negative value on failure. + */ +int +acc200_configure(const char *dev_name, struct rte_acc_conf *conf); + +#endif /* _ACC200_CFG_H_ */ diff --git a/drivers/baseband/acc/acc200_pmd.h b/drivers/baseband/acc/acc200_pmd.h index 587b6f6d5b..f3f2627ae9 100644 --- a/drivers/baseband/acc/acc200_pmd.h +++ b/drivers/baseband/acc/acc200_pmd.h @@ -8,7 +8,7 @@ #include "acc_common.h" #include "acc200_pf_enum.h" #include "acc200_vf_enum.h" -#include "rte_acc200_cfg.h" +#include "acc200_cfg.h" /* Helper macro for logging */ #define rte_bbdev_log(level, fmt, ...) \ diff --git a/drivers/baseband/acc/meson.build b/drivers/baseband/acc/meson.build index 63912f0621..d74ace1481 100644 --- a/drivers/baseband/acc/meson.build +++ b/drivers/baseband/acc/meson.build @@ -5,4 +5,4 @@ deps += ['bbdev', 'bus_vdev', 'ring', 'pci', 'bus_pci'] sources = files('rte_acc100_pmd.c', 'rte_acc200_pmd.c') -headers = files('rte_acc100_cfg.h') +headers = files('rte_acc_cfg.h') diff --git a/drivers/baseband/acc/rte_acc100_pmd.c b/drivers/baseband/acc/rte_acc100_pmd.c index 9cb7b74c64..9ba8bd84d5 100644 --- a/drivers/baseband/acc/rte_acc100_pmd.c +++ b/drivers/baseband/acc/rte_acc100_pmd.c @@ -23,6 +23,7 @@ #include #include "acc100_pmd.h" #include "acc101_pmd.h" +#include "acc200_cfg.h" #ifdef RTE_LIBRTE_BBDEV_DEBUG RTE_LOG_REGISTER_DEFAULT(acc100_logtype, DEBUG); @@ -4638,7 +4639,7 @@ acc101_configure(const char *dev_name, struct rte_acc_conf *conf) } int -rte_acc10x_configure(const char *dev_name, struct rte_acc_conf *conf) +rte_acc_configure(const char *dev_name, struct rte_acc_conf *conf) { struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name); if (bbdev == NULL) { @@ -4650,6 +4651,8 @@ rte_acc10x_configure(const char *dev_name, struct rte_acc_conf *conf) printf("Configure dev id %x\n", pci_dev->id.device_id); if (pci_dev->id.device_id == ACC100_PF_DEVICE_ID) return acc100_configure(dev_name, conf); - else + else if (pci_dev->id.device_id == ACC101_PF_DEVICE_ID) return acc101_configure(dev_name, conf); + else + return acc200_configure(dev_name, conf); } diff --git a/drivers/baseband/acc/rte_acc200_pmd.c b/drivers/baseband/acc/rte_acc200_pmd.c index 522603e095..eb4b451b12 100644 --- a/drivers/baseband/acc/rte_acc200_pmd.c +++ b/drivers/baseband/acc/rte_acc200_pmd.c @@ -43,6 +43,27 @@ queue_offset(bool pf_device, uint8_t vf_id, uint8_t qgrp_id, uint16_t aq_id) enum {UL_4G = 0, UL_5G, DL_4G, DL_5G, FFT, NUM_ACC}; +/* Return the accelerator enum for a Queue Group Index. */ +static inline int +accFromQgid(int qg_idx, const struct rte_acc_conf *acc_conf) +{ + int accQg[ACC200_NUM_QGRPS]; + int NumQGroupsPerFn[NUM_ACC]; + int acc, qgIdx, qgIndex = 0; + for (qgIdx = 0; qgIdx < ACC200_NUM_QGRPS; qgIdx++) + accQg[qgIdx] = 0; + NumQGroupsPerFn[UL_4G] = acc_conf->q_ul_4g.num_qgroups; + NumQGroupsPerFn[UL_5G] = acc_conf->q_ul_5g.num_qgroups; + NumQGroupsPerFn[DL_4G] = acc_conf->q_dl_4g.num_qgroups; + NumQGroupsPerFn[DL_5G] = acc_conf->q_dl_5g.num_qgroups; + NumQGroupsPerFn[FFT] = acc_conf->q_fft.num_qgroups; + for (acc = UL_4G; acc < NUM_ACC; acc++) + for (qgIdx = 0; qgIdx < NumQGroupsPerFn[acc]; qgIdx++) + accQg[qgIndex++] = acc; + acc = accQg[qg_idx]; + return acc; +} + /* Return the queue topology for a Queue Group Index. */ static inline void qtopFromAcc(struct rte_acc_queue_topology **qtop, int acc_enum, struct rte_acc_conf *acc_conf) @@ -74,6 +95,36 @@ qtopFromAcc(struct rte_acc_queue_topology **qtop, int acc_enum, struct rte_acc_c *qtop = p_qtop; } +/* Return the AQ depth for a Queue Group Index. */ +static inline int +aqDepth(int qg_idx, struct rte_acc_conf *acc_conf) +{ + struct rte_acc_queue_topology *q_top = NULL; + + int acc_enum = accFromQgid(qg_idx, acc_conf); + qtopFromAcc(&q_top, acc_enum, acc_conf); + + if (unlikely(q_top == NULL)) + return 0; + + return q_top->aq_depth_log2; +} + +/* Return the AQ depth for a Queue Group Index. */ +static inline int +aqNum(int qg_idx, struct rte_acc_conf *acc_conf) +{ + struct rte_acc_queue_topology *q_top = NULL; + + int acc_enum = accFromQgid(qg_idx, acc_conf); + qtopFromAcc(&q_top, acc_enum, acc_conf); + + if (unlikely(q_top == NULL)) + return 0; + + return q_top->num_aqs_per_groups; +} + static void initQTop(struct rte_acc_conf *acc_conf) { @@ -3385,3 +3436,410 @@ RTE_PMD_REGISTER_PCI(ACC200PF_DRIVER_NAME, acc200_pci_pf_driver); RTE_PMD_REGISTER_PCI_TABLE(ACC200PF_DRIVER_NAME, pci_id_acc200_pf_map); RTE_PMD_REGISTER_PCI(ACC200VF_DRIVER_NAME, acc200_pci_vf_driver); RTE_PMD_REGISTER_PCI_TABLE(ACC200VF_DRIVER_NAME, pci_id_acc200_vf_map); + +/* Initial configuration of a ACC200 device prior to running configure(). */ +int +acc200_configure(const char *dev_name, struct rte_acc_conf *conf) +{ + rte_bbdev_log(INFO, "acc200_configure"); + uint32_t value, address, status; + int qg_idx, template_idx, vf_idx, acc, i, rlim, alen, timestamp, totalQgs, numEngines; + int numQgs, numQqsAcc; + struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name); + + /* Compile time checks. */ + RTE_BUILD_BUG_ON(sizeof(struct acc_dma_req_desc) != 256); + RTE_BUILD_BUG_ON(sizeof(union acc_dma_desc) != 256); + RTE_BUILD_BUG_ON(sizeof(struct acc_fcw_td) != 24); + RTE_BUILD_BUG_ON(sizeof(struct acc_fcw_te) != 32); + + if (bbdev == NULL) { + rte_bbdev_log(ERR, + "Invalid dev_name (%s), or device is not yet initialised", + dev_name); + return -ENODEV; + } + struct acc_device *d = bbdev->data->dev_private; + + /* Store configuration. */ + rte_memcpy(&d->acc_conf, conf, sizeof(d->acc_conf)); + + /* Check we are already out of PG. */ + status = acc_reg_read(d, HWPfHiSectionPowerGatingAck); + if (status > 0) { + if (status != ACC200_PG_MASK_0) { + rte_bbdev_log(ERR, "Unexpected status %x %x", + status, ACC200_PG_MASK_0); + return -ENODEV; + } + /* Clock gate sections that will be un-PG. */ + acc_reg_write(d, HWPfHiClkGateHystReg, ACC200_CLK_DIS); + /* Un-PG required sections. */ + acc_reg_write(d, HWPfHiSectionPowerGatingReq, + ACC200_PG_MASK_1); + status = acc_reg_read(d, HWPfHiSectionPowerGatingAck); + if (status != ACC200_PG_MASK_1) { + rte_bbdev_log(ERR, "Unexpected status %x %x", + status, ACC200_PG_MASK_1); + return -ENODEV; + } + acc_reg_write(d, HWPfHiSectionPowerGatingReq, + ACC200_PG_MASK_2); + status = acc_reg_read(d, HWPfHiSectionPowerGatingAck); + if (status != ACC200_PG_MASK_2) { + rte_bbdev_log(ERR, "Unexpected status %x %x", + status, ACC200_PG_MASK_2); + return -ENODEV; + } + acc_reg_write(d, HWPfHiSectionPowerGatingReq, + ACC200_PG_MASK_3); + status = acc_reg_read(d, HWPfHiSectionPowerGatingAck); + if (status != ACC200_PG_MASK_3) { + rte_bbdev_log(ERR, "Unexpected status %x %x", + status, ACC200_PG_MASK_3); + return -ENODEV; + } + /* Enable clocks for all sections. */ + acc_reg_write(d, HWPfHiClkGateHystReg, ACC200_CLK_EN); + } + + /* Explicitly releasing AXI as this may be stopped after PF FLR/BME. */ + address = HWPfDmaAxiControl; + value = 1; + acc_reg_write(d, address, value); + + /* Set the fabric mode. */ + address = HWPfFabricM2iBufferReg; + value = ACC200_FABRIC_MODE; + acc_reg_write(d, address, value); + + /* Set default descriptor signature. */ + address = HWPfDmaDescriptorSignatuture; + value = 0; + acc_reg_write(d, address, value); + + /* Enable the Error Detection in DMA. */ + value = ACC200_CFG_DMA_ERROR; + address = HWPfDmaErrorDetectionEn; + acc_reg_write(d, address, value); + + /* AXI Cache configuration. */ + value = ACC200_CFG_AXI_CACHE; + address = HWPfDmaAxcacheReg; + acc_reg_write(d, address, value); + + /* AXI Response configuration. */ + acc_reg_write(d, HWPfDmaCfgRrespBresp, 0x0); + + /* Default DMA Configuration (Qmgr Enabled). */ + address = HWPfDmaConfig0Reg; + value = 0; + acc_reg_write(d, address, value); + address = HWPfDmaQmanen; + value = 0; + acc_reg_write(d, address, value); + + /* Default RLIM/ALEN configuration. */ + rlim = 0; + alen = 1; + timestamp = 0; + address = HWPfDmaConfig1Reg; + value = (1 << 31) + (rlim << 8) + (timestamp << 6) + alen; + acc_reg_write(d, address, value); + + /* Default FFT configuration. */ + address = HWPfFftConfig0; + value = ACC200_FFT_CFG_0; + acc_reg_write(d, address, value); + + /* Configure DMA Qmanager addresses. */ + address = HWPfDmaQmgrAddrReg; + value = HWPfQmgrEgressQueuesTemplate; + acc_reg_write(d, address, value); + + /* ===== Qmgr Configuration ===== */ + /* Configuration of the AQueue Depth QMGR_GRP_0_DEPTH_LOG2 for UL. */ + totalQgs = conf->q_ul_4g.num_qgroups + + conf->q_ul_5g.num_qgroups + + conf->q_dl_4g.num_qgroups + + conf->q_dl_5g.num_qgroups + + conf->q_fft.num_qgroups; + for (qg_idx = 0; qg_idx < ACC200_NUM_QGRPS; qg_idx++) { + address = HWPfQmgrDepthLog2Grp + + ACC_BYTES_IN_WORD * qg_idx; + value = aqDepth(qg_idx, conf); + acc_reg_write(d, address, value); + address = HWPfQmgrTholdGrp + + ACC_BYTES_IN_WORD * qg_idx; + value = (1 << 16) + (1 << (aqDepth(qg_idx, conf) - 1)); + acc_reg_write(d, address, value); + } + + /* Template Priority in incremental order. */ + for (template_idx = 0; template_idx < ACC_NUM_TMPL; + template_idx++) { + address = HWPfQmgrGrpTmplateReg0Indx + ACC_BYTES_IN_WORD * template_idx; + value = ACC_TMPL_PRI_0; + acc_reg_write(d, address, value); + address = HWPfQmgrGrpTmplateReg1Indx + ACC_BYTES_IN_WORD * template_idx; + value = ACC_TMPL_PRI_1; + acc_reg_write(d, address, value); + address = HWPfQmgrGrpTmplateReg2indx + ACC_BYTES_IN_WORD * template_idx; + value = ACC_TMPL_PRI_2; + acc_reg_write(d, address, value); + address = HWPfQmgrGrpTmplateReg3Indx + ACC_BYTES_IN_WORD * template_idx; + value = ACC_TMPL_PRI_3; + acc_reg_write(d, address, value); + } + + address = HWPfQmgrGrpPriority; + value = ACC200_CFG_QMGR_HI_P; + acc_reg_write(d, address, value); + + /* Template Configuration. */ + for (template_idx = 0; template_idx < ACC_NUM_TMPL; + template_idx++) { + value = 0; + address = HWPfQmgrGrpTmplateReg4Indx + + ACC_BYTES_IN_WORD * template_idx; + acc_reg_write(d, address, value); + } + /* 4GUL */ + numQgs = conf->q_ul_4g.num_qgroups; + numQqsAcc = 0; + value = 0; + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++) + value |= (1 << qg_idx); + for (template_idx = ACC200_SIG_UL_4G; + template_idx <= ACC200_SIG_UL_4G_LAST; + template_idx++) { + address = HWPfQmgrGrpTmplateReg4Indx + + ACC_BYTES_IN_WORD * template_idx; + acc_reg_write(d, address, value); + } + /* 5GUL */ + numQqsAcc += numQgs; + numQgs = conf->q_ul_5g.num_qgroups; + value = 0; + numEngines = 0; + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++) + value |= (1 << qg_idx); + for (template_idx = ACC200_SIG_UL_5G; + template_idx <= ACC200_SIG_UL_5G_LAST; + template_idx++) { + /* Check engine power-on status */ + address = HwPfFecUl5gIbDebugReg + ACC_ENGINE_OFFSET * template_idx; + status = (acc_reg_read(d, address) >> 4) & 0x7; + address = HWPfQmgrGrpTmplateReg4Indx + + ACC_BYTES_IN_WORD * template_idx; + if (status == 1) { + acc_reg_write(d, address, value); + numEngines++; + } else + acc_reg_write(d, address, 0); + } + printf("Number of 5GUL engines %d\n", numEngines); + /* 4GDL */ + numQqsAcc += numQgs; + numQgs = conf->q_dl_4g.num_qgroups; + value = 0; + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++) + value |= (1 << qg_idx); + for (template_idx = ACC200_SIG_DL_4G; + template_idx <= ACC200_SIG_DL_4G_LAST; + template_idx++) { + address = HWPfQmgrGrpTmplateReg4Indx + + ACC_BYTES_IN_WORD * template_idx; + acc_reg_write(d, address, value); + } + /* 5GDL */ + numQqsAcc += numQgs; + numQgs = conf->q_dl_5g.num_qgroups; + value = 0; + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++) + value |= (1 << qg_idx); + for (template_idx = ACC200_SIG_DL_5G; + template_idx <= ACC200_SIG_DL_5G_LAST; + template_idx++) { + address = HWPfQmgrGrpTmplateReg4Indx + + ACC_BYTES_IN_WORD * template_idx; + acc_reg_write(d, address, value); + } + /* FFT */ + numQqsAcc += numQgs; + numQgs = conf->q_fft.num_qgroups; + value = 0; + for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++) + value |= (1 << qg_idx); + for (template_idx = ACC200_SIG_FFT; + template_idx <= ACC200_SIG_FFT_LAST; + template_idx++) { + address = HWPfQmgrGrpTmplateReg4Indx + + ACC_BYTES_IN_WORD * template_idx; + acc_reg_write(d, address, value); + } + + /* Queue Group Function mapping. */ + int qman_func_id[8] = {0, 2, 1, 3, 4, 0, 0, 0}; + value = 0; + for (qg_idx = 0; qg_idx < ACC_NUM_QGRPS_PER_WORD; qg_idx++) { + acc = accFromQgid(qg_idx, conf); + value |= qman_func_id[acc] << (qg_idx * 4); + } + acc_reg_write(d, HWPfQmgrGrpFunction0, value); + value = 0; + for (qg_idx = 0; qg_idx < ACC_NUM_QGRPS_PER_WORD; qg_idx++) { + acc = accFromQgid(qg_idx + ACC_NUM_QGRPS_PER_WORD, conf); + value |= qman_func_id[acc] << (qg_idx * 4); + } + acc_reg_write(d, HWPfQmgrGrpFunction1, value); + + /* Configuration of the Arbitration QGroup depth to 1. */ + for (qg_idx = 0; qg_idx < ACC200_NUM_QGRPS; qg_idx++) { + address = HWPfQmgrArbQDepthGrp + + ACC_BYTES_IN_WORD * qg_idx; + value = 0; + acc_reg_write(d, address, value); + } + + /* This pointer to ARAM (256kB) is shifted by 2 (4B per register). */ + uint32_t aram_address = 0; + for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) { + for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) { + address = HWPfQmgrVfBaseAddr + vf_idx + * ACC_BYTES_IN_WORD + qg_idx + * ACC_BYTES_IN_WORD * 64; + value = aram_address; + acc_reg_write(d, address, value); + /* Offset ARAM Address for next memory bank - increment of 4B. */ + aram_address += aqNum(qg_idx, conf) * + (1 << aqDepth(qg_idx, conf)); + } + } + + if (aram_address > ACC200_WORDS_IN_ARAM_SIZE) { + rte_bbdev_log(ERR, "ARAM Configuration not fitting %d %d\n", + aram_address, ACC200_WORDS_IN_ARAM_SIZE); + return -EINVAL; + } + + /* Performance tuning. */ + acc_reg_write(d, HWPfFabricI2Mdma_weight, 0x0FFF); + acc_reg_write(d, HWPfDma4gdlIbThld, 0x1f10); + + /* ==== HI Configuration ==== */ + + /* No Info Ring/MSI by default. */ + address = HWPfHiInfoRingIntWrEnRegPf; + value = 0; + acc_reg_write(d, address, value); + address = HWPfHiCfgMsiIntWrEnRegPf; + value = 0xFFFFFFFF; + acc_reg_write(d, address, value); + /* Prevent Block on Transmit Error. */ + address = HWPfHiBlockTransmitOnErrorEn; + value = 0; + acc_reg_write(d, address, value); + /* Prevents to drop MSI. */ + address = HWPfHiMsiDropEnableReg; + value = 0; + acc_reg_write(d, address, value); + /* Set the PF Mode register. */ + address = HWPfHiPfMode; + value = (conf->pf_mode_en) ? ACC_PF_VAL : 0; + acc_reg_write(d, address, value); + + /* QoS overflow init. */ + value = 1; + address = HWPfQosmonAEvalOverflow0; + acc_reg_write(d, address, value); + address = HWPfQosmonBEvalOverflow0; + acc_reg_write(d, address, value); + + /* Configure the FFT RAM LUT. */ + uint32_t fft_lut[ACC200_FFT_RAM_SIZE] = { + 0x1FFFF, 0x1FFFF, 0x1FFFE, 0x1FFFA, 0x1FFF6, 0x1FFF1, 0x1FFEA, 0x1FFE2, + 0x1FFD9, 0x1FFCE, 0x1FFC2, 0x1FFB5, 0x1FFA7, 0x1FF98, 0x1FF87, 0x1FF75, + 0x1FF62, 0x1FF4E, 0x1FF38, 0x1FF21, 0x1FF09, 0x1FEF0, 0x1FED6, 0x1FEBA, + 0x1FE9D, 0x1FE7F, 0x1FE5F, 0x1FE3F, 0x1FE1D, 0x1FDFA, 0x1FDD5, 0x1FDB0, + 0x1FD89, 0x1FD61, 0x1FD38, 0x1FD0D, 0x1FCE1, 0x1FCB4, 0x1FC86, 0x1FC57, + 0x1FC26, 0x1FBF4, 0x1FBC1, 0x1FB8D, 0x1FB58, 0x1FB21, 0x1FAE9, 0x1FAB0, + 0x1FA75, 0x1FA3A, 0x1F9FD, 0x1F9BF, 0x1F980, 0x1F93F, 0x1F8FD, 0x1F8BA, + 0x1F876, 0x1F831, 0x1F7EA, 0x1F7A3, 0x1F75A, 0x1F70F, 0x1F6C4, 0x1F677, + 0x1F629, 0x1F5DA, 0x1F58A, 0x1F539, 0x1F4E6, 0x1F492, 0x1F43D, 0x1F3E7, + 0x1F38F, 0x1F337, 0x1F2DD, 0x1F281, 0x1F225, 0x1F1C8, 0x1F169, 0x1F109, + 0x1F0A8, 0x1F046, 0x1EFE2, 0x1EF7D, 0x1EF18, 0x1EEB0, 0x1EE48, 0x1EDDF, + 0x1ED74, 0x1ED08, 0x1EC9B, 0x1EC2D, 0x1EBBE, 0x1EB4D, 0x1EADB, 0x1EA68, + 0x1E9F4, 0x1E97F, 0x1E908, 0x1E891, 0x1E818, 0x1E79E, 0x1E722, 0x1E6A6, + 0x1E629, 0x1E5AA, 0x1E52A, 0x1E4A9, 0x1E427, 0x1E3A3, 0x1E31F, 0x1E299, + 0x1E212, 0x1E18A, 0x1E101, 0x1E076, 0x1DFEB, 0x1DF5E, 0x1DED0, 0x1DE41, + 0x1DDB1, 0x1DD20, 0x1DC8D, 0x1DBFA, 0x1DB65, 0x1DACF, 0x1DA38, 0x1D9A0, + 0x1D907, 0x1D86C, 0x1D7D1, 0x1D734, 0x1D696, 0x1D5F7, 0x1D557, 0x1D4B6, + 0x1D413, 0x1D370, 0x1D2CB, 0x1D225, 0x1D17E, 0x1D0D6, 0x1D02D, 0x1CF83, + 0x1CED8, 0x1CE2B, 0x1CD7E, 0x1CCCF, 0x1CC1F, 0x1CB6E, 0x1CABC, 0x1CA09, + 0x1C955, 0x1C89F, 0x1C7E9, 0x1C731, 0x1C679, 0x1C5BF, 0x1C504, 0x1C448, + 0x1C38B, 0x1C2CD, 0x1C20E, 0x1C14E, 0x1C08C, 0x1BFCA, 0x1BF06, 0x1BE42, + 0x1BD7C, 0x1BCB5, 0x1BBED, 0x1BB25, 0x1BA5B, 0x1B990, 0x1B8C4, 0x1B7F6, + 0x1B728, 0x1B659, 0x1B589, 0x1B4B7, 0x1B3E5, 0x1B311, 0x1B23D, 0x1B167, + 0x1B091, 0x1AFB9, 0x1AEE0, 0x1AE07, 0x1AD2C, 0x1AC50, 0x1AB73, 0x1AA95, + 0x1A9B6, 0x1A8D6, 0x1A7F6, 0x1A714, 0x1A631, 0x1A54D, 0x1A468, 0x1A382, + 0x1A29A, 0x1A1B2, 0x1A0C9, 0x19FDF, 0x19EF4, 0x19E08, 0x19D1B, 0x19C2D, + 0x19B3E, 0x19A4E, 0x1995D, 0x1986B, 0x19778, 0x19684, 0x1958F, 0x19499, + 0x193A2, 0x192AA, 0x191B1, 0x190B8, 0x18FBD, 0x18EC1, 0x18DC4, 0x18CC7, + 0x18BC8, 0x18AC8, 0x189C8, 0x188C6, 0x187C4, 0x186C1, 0x185BC, 0x184B7, + 0x183B1, 0x182AA, 0x181A2, 0x18099, 0x17F8F, 0x17E84, 0x17D78, 0x17C6C, + 0x17B5E, 0x17A4F, 0x17940, 0x17830, 0x1771E, 0x1760C, 0x174F9, 0x173E5, + 0x172D1, 0x171BB, 0x170A4, 0x16F8D, 0x16E74, 0x16D5B, 0x16C41, 0x16B26, + 0x16A0A, 0x168ED, 0x167CF, 0x166B1, 0x16592, 0x16471, 0x16350, 0x1622E, + 0x1610B, 0x15FE8, 0x15EC3, 0x15D9E, 0x15C78, 0x15B51, 0x15A29, 0x15900, + 0x157D7, 0x156AC, 0x15581, 0x15455, 0x15328, 0x151FB, 0x150CC, 0x14F9D, + 0x14E6D, 0x14D3C, 0x14C0A, 0x14AD8, 0x149A4, 0x14870, 0x1473B, 0x14606, + 0x144CF, 0x14398, 0x14260, 0x14127, 0x13FEE, 0x13EB3, 0x13D78, 0x13C3C, + 0x13B00, 0x139C2, 0x13884, 0x13745, 0x13606, 0x134C5, 0x13384, 0x13242, + 0x130FF, 0x12FBC, 0x12E78, 0x12D33, 0x12BEE, 0x12AA7, 0x12960, 0x12819, + 0x126D0, 0x12587, 0x1243D, 0x122F3, 0x121A8, 0x1205C, 0x11F0F, 0x11DC2, + 0x11C74, 0x11B25, 0x119D6, 0x11886, 0x11735, 0x115E3, 0x11491, 0x1133F, + 0x111EB, 0x11097, 0x10F42, 0x10DED, 0x10C97, 0x10B40, 0x109E9, 0x10891, + 0x10738, 0x105DF, 0x10485, 0x1032B, 0x101D0, 0x10074, 0x0FF18, 0x0FDBB, + 0x0FC5D, 0x0FAFF, 0x0F9A0, 0x0F841, 0x0F6E1, 0x0F580, 0x0F41F, 0x0F2BD, + 0x0F15B, 0x0EFF8, 0x0EE94, 0x0ED30, 0x0EBCC, 0x0EA67, 0x0E901, 0x0E79A, + 0x0E633, 0x0E4CC, 0x0E364, 0x0E1FB, 0x0E092, 0x0DF29, 0x0DDBE, 0x0DC54, + 0x0DAE9, 0x0D97D, 0x0D810, 0x0D6A4, 0x0D536, 0x0D3C8, 0x0D25A, 0x0D0EB, + 0x0CF7C, 0x0CE0C, 0x0CC9C, 0x0CB2B, 0x0C9B9, 0x0C847, 0x0C6D5, 0x0C562, + 0x0C3EF, 0x0C27B, 0x0C107, 0x0BF92, 0x0BE1D, 0x0BCA8, 0x0BB32, 0x0B9BB, + 0x0B844, 0x0B6CD, 0x0B555, 0x0B3DD, 0x0B264, 0x0B0EB, 0x0AF71, 0x0ADF7, + 0x0AC7D, 0x0AB02, 0x0A987, 0x0A80B, 0x0A68F, 0x0A513, 0x0A396, 0x0A219, + 0x0A09B, 0x09F1D, 0x09D9E, 0x09C20, 0x09AA1, 0x09921, 0x097A1, 0x09621, + 0x094A0, 0x0931F, 0x0919E, 0x0901C, 0x08E9A, 0x08D18, 0x08B95, 0x08A12, + 0x0888F, 0x0870B, 0x08587, 0x08402, 0x0827E, 0x080F9, 0x07F73, 0x07DEE, + 0x07C68, 0x07AE2, 0x0795B, 0x077D4, 0x0764D, 0x074C6, 0x0733E, 0x071B6, + 0x0702E, 0x06EA6, 0x06D1D, 0x06B94, 0x06A0B, 0x06881, 0x066F7, 0x0656D, + 0x063E3, 0x06258, 0x060CE, 0x05F43, 0x05DB7, 0x05C2C, 0x05AA0, 0x05914, + 0x05788, 0x055FC, 0x0546F, 0x052E3, 0x05156, 0x04FC9, 0x04E3B, 0x04CAE, + 0x04B20, 0x04992, 0x04804, 0x04676, 0x044E8, 0x04359, 0x041CB, 0x0403C, + 0x03EAD, 0x03D1D, 0x03B8E, 0x039FF, 0x0386F, 0x036DF, 0x0354F, 0x033BF, + 0x0322F, 0x0309F, 0x02F0F, 0x02D7E, 0x02BEE, 0x02A5D, 0x028CC, 0x0273B, + 0x025AA, 0x02419, 0x02288, 0x020F7, 0x01F65, 0x01DD4, 0x01C43, 0x01AB1, + 0x0191F, 0x0178E, 0x015FC, 0x0146A, 0x012D8, 0x01147, 0x00FB5, 0x00E23, + 0x00C91, 0x00AFF, 0x0096D, 0x007DB, 0x00648, 0x004B6, 0x00324, 0x00192}; + + acc_reg_write(d, HWPfFftRamPageAccess, ACC200_FFT_RAM_EN + 64); + for (i = 0; i < ACC200_FFT_RAM_SIZE; i++) + acc_reg_write(d, HWPfFftRamOff + i * 4, fft_lut[i]); + acc_reg_write(d, HWPfFftRamPageAccess, ACC200_FFT_RAM_DIS); + + /* Enabling AQueues through the Queue hierarchy. */ + for (vf_idx = 0; vf_idx < ACC200_NUM_VFS; vf_idx++) { + for (qg_idx = 0; qg_idx < ACC200_NUM_QGRPS; qg_idx++) { + value = 0; + if (vf_idx < conf->num_vf_bundles && qg_idx < totalQgs) + value = (1 << aqNum(qg_idx, conf)) - 1; + address = HWPfQmgrAqEnableVf + vf_idx * ACC_BYTES_IN_WORD; + value += (qg_idx << 16); + acc_reg_write(d, address, value); + } + } + + rte_bbdev_log_debug("PF Tip configuration complete for %s", dev_name); + return 0; +} diff --git a/drivers/baseband/acc/rte_acc100_cfg.h b/drivers/baseband/acc/rte_acc_cfg.h similarity index 67% rename from drivers/baseband/acc/rte_acc100_cfg.h rename to drivers/baseband/acc/rte_acc_cfg.h index 732c03be24..21bcf88dad 100644 --- a/drivers/baseband/acc/rte_acc100_cfg.h +++ b/drivers/baseband/acc/rte_acc_cfg.h @@ -2,13 +2,13 @@ * Copyright(c) 2022 Intel Corporation */ -#ifndef _RTE_ACC100_CFG_H_ -#define _RTE_ACC100_CFG_H_ +#ifndef _RTE_ACC_CFG_H_ +#define _RTE_ACC_CFG_H_ /** - * @file rte_acc100_cfg.h + * @file rte_acc_cfg.h * - * Functions for configuring ACC100 HW, exposed directly to applications. + * Functions for configuring ACC HW, exposed directly to applications. * Configuration related to encoding/decoding is done through the * librte_bbdev library. * @@ -26,24 +26,24 @@ extern "C" { /** - * Configure a ACC100/ACC101 device in PF mode notably for bbdev-test + * Configure a ACC device in PF mode notably for bbdev-test * * @param dev_name * The name of the device. This is the short form of PCI BDF, e.g. 00:01.0. * It can also be retrieved for a bbdev device from the dev_name field in the * rte_bbdev_info structure returned by rte_bbdev_info_get(). * @param conf - * Configuration to apply to ACC100 HW. + * Configuration to apply to ACC HW. * * @return * Zero on success, negative value on failure. */ __rte_experimental int -rte_acc10x_configure(const char *dev_name, struct rte_acc_conf *conf); +rte_acc_configure(const char *dev_name, struct rte_acc_conf *conf); #ifdef __cplusplus } #endif -#endif /* _RTE_ACC100_CFG_H_ */ +#endif /* _RTE_ACC_CFG_H_ */ diff --git a/drivers/baseband/acc/rte_acc_common_cfg.h b/drivers/baseband/acc/rte_acc_common_cfg.h index 8292ef44da..cce75d5878 100644 --- a/drivers/baseband/acc/rte_acc_common_cfg.h +++ b/drivers/baseband/acc/rte_acc_common_cfg.h @@ -6,9 +6,9 @@ #define _RTE_ACC_COMMON_CFG_H_ /** - * @file rte_acc100_cfg.h + * @file rte_acc_common_cfg.h * - * Functions for configuring ACC100 HW, exposed directly to applications. + * Functions for configuring ACC HW, exposed directly to applications. * Configuration related to encoding/decoding is done through the * librte_bbdev library. * @@ -23,11 +23,11 @@ extern "C" { #endif -/**< Number of Virtual Functions ACC300 supports */ +/**< Maximum number of Virtual Functions ACC may support */ #define RTE_ACC_NUM_VFS 64 /** - * Definition of Queue Topology for ACC300 Configuration + * Definition of Queue Topology for ACC Configuration * Some level of details is abstracted out to expose a clean interface * given that comprehensive flexibility is not required */ @@ -54,7 +54,7 @@ struct rte_acc_queue_topology { }; /** - * Definition of Arbitration related parameters for ACC300 Configuration + * Definition of Arbitration related parameters for ACC Configuration */ struct rte_acc_arbitration { /** Default Weight for VF Fairness Arbitration */ @@ -64,7 +64,7 @@ struct rte_acc_arbitration { }; /** - * Structure to pass ACC300 configuration. + * Structure to pass ACC configuration. * Note: all VF Bundles will have the same configuration. */ struct rte_acc_conf { diff --git a/drivers/baseband/acc/version.map b/drivers/baseband/acc/version.map index b4ff13e38f..95ae74dd35 100644 --- a/drivers/baseband/acc/version.map +++ b/drivers/baseband/acc/version.map @@ -5,5 +5,5 @@ DPDK_23 { EXPERIMENTAL { global: - rte_acc10x_configure; + rte_acc_configure; }; -- 2.37.1