DPDK patches and discussions
 help / color / mirror / Atom feed
* [PATCH 1/2] devtools: document test meson script config options
@ 2022-12-06 12:23 Ferruh Yigit
  2022-12-06 12:23 ` [PATCH 2/2] devtools: configure source repo to use as ABI reference Ferruh Yigit
  2022-12-09  9:02 ` [PATCH v2 1/2] devtools: document test meson script config options David Marchand
  0 siblings, 2 replies; 10+ messages in thread
From: Ferruh Yigit @ 2022-12-06 12:23 UTC (permalink / raw)
  To: Thomas Monjalon, Bruce Richardson; +Cc: David Marchand, dev

Document config options of script that can be provided by 'devel.config'
config file.

Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
---
 devtools/test-meson-builds.sh | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/devtools/test-meson-builds.sh b/devtools/test-meson-builds.sh
index 3a308bc9af65..bbe90e2bde2e 100755
--- a/devtools/test-meson-builds.sh
+++ b/devtools/test-meson-builds.sh
@@ -12,6 +12,16 @@ PIPEFAIL=""
 set -o | grep -q pipefail && set -o pipefail && PIPEFAIL=1
 
 srcdir=$(dirname $(readlink -f $0))/..
+
+# Load config options:
+# - DPDK_BUILD_TEST_DIR
+#
+# - DPDK_MESON_OPTIONS
+#
+# - DPDK_ABI_REF_DIR
+# - DPDK_ABI_REF_VERSION
+#
+# - DPDK_BUILD_TEST_EXAMPLES
 . $srcdir/devtools/load-devel-config
 
 MESON=${MESON:-meson}
-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 2/2] devtools: configure source repo to use as ABI reference
  2022-12-06 12:23 [PATCH 1/2] devtools: document test meson script config options Ferruh Yigit
@ 2022-12-06 12:23 ` Ferruh Yigit
  2022-12-08 18:14   ` [EXT] " Akhil Goyal
  2022-12-09  8:22   ` David Marchand
  2022-12-09  9:02 ` [PATCH v2 1/2] devtools: document test meson script config options David Marchand
  1 sibling, 2 replies; 10+ messages in thread
From: Ferruh Yigit @ 2022-12-06 12:23 UTC (permalink / raw)
  To: Thomas Monjalon, Bruce Richardson; +Cc: David Marchand, dev

By default 'test-meson-builds.sh' script clones the repository which the
script is in, and selects a configured branch ('DPDK_ABI_REF_VERSION')
as a reference for ABI check.

This patch enables selecting different repository to close for reference
using 'DPDK_ABI_REF_SRC' environment variable.

It is possible to put these variables to 'devel.config' config file, or
provide via command line, like:
`
 DPDK_ABI_REF_SRC=~/dpdk-stable/   \
 DPDK_ABI_REF_VERSION=v22.11.1     \
 DPDK_ABI_REF_DIR=/tmp/dpdk-abiref \
 ./devtools/test-meson-builds.sh
`

When 'DPDK_ABI_REF_SRC' is not defined, script behaves as it did
previously.

Other alternative to using 'DPDK_ABI_REF_SRC' variable is adding that
other repo as a new 'remote' to the exiting git repository.

Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
---
 devtools/test-meson-builds.sh | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/devtools/test-meson-builds.sh b/devtools/test-meson-builds.sh
index bbe90e2bde2e..8a0ed92fcf0a 100755
--- a/devtools/test-meson-builds.sh
+++ b/devtools/test-meson-builds.sh
@@ -18,6 +18,7 @@ srcdir=$(dirname $(readlink -f $0))/..
 #
 # - DPDK_MESON_OPTIONS
 #
+# - DPDK_ABI_REF_SRC
 # - DPDK_ABI_REF_DIR
 # - DPDK_ABI_REF_VERSION
 #
@@ -185,12 +186,13 @@ build () # <directory> <target cc | cross file> <ABI check> [meson options]
 	if [ -n "$DPDK_ABI_REF_VERSION" -a "$abicheck" = ABI ] ; then
 		abirefdir=${DPDK_ABI_REF_DIR:-reference}/$DPDK_ABI_REF_VERSION
 		if [ ! -d $abirefdir/$targetdir ]; then
+			abirefsrc=${DPDK_ABI_REF_SRC:-$srcdir}
 			# clone current sources
 			if [ ! -d $abirefdir/src ]; then
 				git clone --local --no-hardlinks \
 					--single-branch \
 					-b $DPDK_ABI_REF_VERSION \
-					$srcdir $abirefdir/src
+					$abirefsrc $abirefdir/src
 			fi
 
 			rm -rf $abirefdir/build
-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* RE: [EXT] [PATCH 2/2] devtools: configure source repo to use as ABI reference
  2022-12-06 12:23 ` [PATCH 2/2] devtools: configure source repo to use as ABI reference Ferruh Yigit
@ 2022-12-08 18:14   ` Akhil Goyal
  2022-12-08 19:43     ` Thomas Monjalon
  2022-12-09  8:22   ` David Marchand
  1 sibling, 1 reply; 10+ messages in thread
From: Akhil Goyal @ 2022-12-08 18:14 UTC (permalink / raw)
  To: Ferruh Yigit, Thomas Monjalon, Bruce Richardson; +Cc: David Marchand, dev

> By default 'test-meson-builds.sh' script clones the repository which the
> script is in, and selects a configured branch ('DPDK_ABI_REF_VERSION')
> as a reference for ABI check.
> 
> This patch enables selecting different repository to close for reference
> using 'DPDK_ABI_REF_SRC' environment variable.
> 
> It is possible to put these variables to 'devel.config' config file, or
> provide via command line, like:
> `
>  DPDK_ABI_REF_SRC=~/dpdk-stable/   \
>  DPDK_ABI_REF_VERSION=v22.11.1     \
>  DPDK_ABI_REF_DIR=/tmp/dpdk-abiref \
>  ./devtools/test-meson-builds.sh
> `
> 
> When 'DPDK_ABI_REF_SRC' is not defined, script behaves as it did
> previously.
> 
> Other alternative to using 'DPDK_ABI_REF_SRC' variable is adding that
> other repo as a new 'remote' to the exiting git repository.
> 
> Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
> ---

Acked-by: Akhil Goyal <gakhil@marvell.com>

Worked for me, but I still needed to clone the dpdk-stable repo manually.
I was hoping, test-meson-build.sh would do that by itself.
Had it been a tag in same repo, it would have been straight forward as before.
I would still suggest to add a tag v22.11.1 in main branch and all can use that instead of v22.11.
The fix that we are talking about is a mandatory one for each one to use for ABI checks,
dpdk-stable patches are not mandatory for the users.

-Akhil




^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [EXT] [PATCH 2/2] devtools: configure source repo to use as ABI reference
  2022-12-08 18:14   ` [EXT] " Akhil Goyal
@ 2022-12-08 19:43     ` Thomas Monjalon
  2022-12-09  4:16       ` Akhil Goyal
  0 siblings, 1 reply; 10+ messages in thread
From: Thomas Monjalon @ 2022-12-08 19:43 UTC (permalink / raw)
  To: Ferruh Yigit, Bruce Richardson, Akhil Goyal; +Cc: David Marchand, dev

08/12/2022 19:14, Akhil Goyal:
> > By default 'test-meson-builds.sh' script clones the repository which the
> > script is in, and selects a configured branch ('DPDK_ABI_REF_VERSION')
> > as a reference for ABI check.
> > 
> > This patch enables selecting different repository to close for reference
> > using 'DPDK_ABI_REF_SRC' environment variable.
> > 
> > It is possible to put these variables to 'devel.config' config file, or
> > provide via command line, like:
> > `
> >  DPDK_ABI_REF_SRC=~/dpdk-stable/   \
> >  DPDK_ABI_REF_VERSION=v22.11.1     \
> >  DPDK_ABI_REF_DIR=/tmp/dpdk-abiref \
> >  ./devtools/test-meson-builds.sh
> > `
> > 
> > When 'DPDK_ABI_REF_SRC' is not defined, script behaves as it did
> > previously.
> > 
> > Other alternative to using 'DPDK_ABI_REF_SRC' variable is adding that
> > other repo as a new 'remote' to the exiting git repository.
> > 
> > Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
> > ---
> 
> Acked-by: Akhil Goyal <gakhil@marvell.com>
> 
> Worked for me, but I still needed to clone the dpdk-stable repo manually.
> I was hoping, test-meson-build.sh would do that by itself.
> Had it been a tag in same repo, it would have been straight forward as before.
> I would still suggest to add a tag v22.11.1 in main branch and all can use that instead of v22.11.

First, v22.11.1 exists already in dpdk-stable.
Second, vXX.YY.z tags are supposed to be only in dpdk-stable.

> The fix that we are talking about is a mandatory one for each one to use for ABI checks,
> dpdk-stable patches are not mandatory for the users.

You could have dpdk-stable as a remote in your main DPDK directory.
If you don't want to do that, you could refer to the commit SHA1 of the fix I think.



^ permalink raw reply	[flat|nested] 10+ messages in thread

* RE: [EXT] [PATCH 2/2] devtools: configure source repo to use as ABI reference
  2022-12-08 19:43     ` Thomas Monjalon
@ 2022-12-09  4:16       ` Akhil Goyal
  0 siblings, 0 replies; 10+ messages in thread
From: Akhil Goyal @ 2022-12-09  4:16 UTC (permalink / raw)
  To: Thomas Monjalon, Ferruh Yigit, Bruce Richardson; +Cc: David Marchand, dev

> 08/12/2022 19:14, Akhil Goyal:
> > > By default 'test-meson-builds.sh' script clones the repository which the
> > > script is in, and selects a configured branch ('DPDK_ABI_REF_VERSION')
> > > as a reference for ABI check.
> > >
> > > This patch enables selecting different repository to close for reference
> > > using 'DPDK_ABI_REF_SRC' environment variable.
> > >
> > > It is possible to put these variables to 'devel.config' config file, or
> > > provide via command line, like:
> > > `
> > >  DPDK_ABI_REF_SRC=~/dpdk-stable/   \
> > >  DPDK_ABI_REF_VERSION=v22.11.1     \
> > >  DPDK_ABI_REF_DIR=/tmp/dpdk-abiref \
> > >  ./devtools/test-meson-builds.sh
> > > `
> > >
> > > When 'DPDK_ABI_REF_SRC' is not defined, script behaves as it did
> > > previously.
> > >
> > > Other alternative to using 'DPDK_ABI_REF_SRC' variable is adding that
> > > other repo as a new 'remote' to the exiting git repository.
> > >
> > > Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
> > > ---
> >
> > Acked-by: Akhil Goyal <gakhil@marvell.com>
> >
> > Worked for me, but I still needed to clone the dpdk-stable repo manually.
> > I was hoping, test-meson-build.sh would do that by itself.
> > Had it been a tag in same repo, it would have been straight forward as before.
> > I would still suggest to add a tag v22.11.1 in main branch and all can use that
> instead of v22.11.
> 
> First, v22.11.1 exists already in dpdk-stable.
> Second, vXX.YY.z tags are supposed to be only in dpdk-stable.

May be some other tag name we can think. v22.11.hotfix or something better.
I was just asking to give a name to commit, and NOT updating the VERSION file.

> 
> > The fix that we are talking about is a mandatory one for each one to use for
> ABI checks,
> > dpdk-stable patches are not mandatory for the users.
> 
> You could have dpdk-stable as a remote in your main DPDK directory.
> If you don't want to do that, you could refer to the commit SHA1 of the fix I
> think.
> 
Adding remote did not solve the issue as the commits are different(version commit).
I cloned stable repo separately and it worked for me.
Since you refer to use commit SHA, why not give it a name, remembering SHA is not easy.

-Akhil


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 2/2] devtools: configure source repo to use as ABI reference
  2022-12-06 12:23 ` [PATCH 2/2] devtools: configure source repo to use as ABI reference Ferruh Yigit
  2022-12-08 18:14   ` [EXT] " Akhil Goyal
@ 2022-12-09  8:22   ` David Marchand
  2022-12-09  8:44     ` Ferruh Yigit
  1 sibling, 1 reply; 10+ messages in thread
From: David Marchand @ 2022-12-09  8:22 UTC (permalink / raw)
  To: Ferruh Yigit; +Cc: Thomas Monjalon, Bruce Richardson, dev, Akhil Goyal

On Tue, Dec 6, 2022 at 1:24 PM Ferruh Yigit <ferruh.yigit@amd.com> wrote:
>
> By default 'test-meson-builds.sh' script clones the repository which the
> script is in, and selects a configured branch ('DPDK_ABI_REF_VERSION')
> as a reference for ABI check.
>
> This patch enables selecting different repository to close for reference
> using 'DPDK_ABI_REF_SRC' environment variable.
>
> It is possible to put these variables to 'devel.config' config file, or
> provide via command line, like:
> `
>  DPDK_ABI_REF_SRC=~/dpdk-stable/   \

DPDK_ABI_REF_SRC could be passed as a remote repository.
This should remove the need for any "git remote" configuration.

$ DPDK_ABI_REF_SRC=https://dpdk.org/git/dpdk-stable
DPDK_ABI_REF_VERSION=v22.11.1 ./devtools/test-meson-builds.sh


diff --git a/devtools/test-meson-builds.sh b/devtools/test-meson-builds.sh
index 406bf4e184..48f4e52df3 100755
--- a/devtools/test-meson-builds.sh
+++ b/devtools/test-meson-builds.sh
@@ -18,8 +18,8 @@ srcdir=$(dirname $(readlink -f $0))/..
 #
 # - DPDK_MESON_OPTIONS
 #
-# - DPDK_ABI_REF_SRC
 # - DPDK_ABI_REF_DIR
+# - DPDK_ABI_REF_SRC
 # - DPDK_ABI_REF_VERSION
 #
 # - DPDK_BUILD_TEST_EXAMPLES
@@ -186,10 +186,14 @@ build () # <directory> <target cc | cross file>
<ABI check> [meson options]
        if [ -n "$DPDK_ABI_REF_VERSION" -a "$abicheck" = ABI ] ; then
                abirefdir=${DPDK_ABI_REF_DIR:-reference}/$DPDK_ABI_REF_VERSION
                if [ ! -d $abirefdir/$targetdir ]; then
-                       abirefsrc=${DPDK_ABI_REF_SRC:-$srcdir}
                        # clone current sources
                        if [ ! -d $abirefdir/src ]; then
-                               git clone --local --no-hardlinks \
+                               abirefsrc=${DPDK_ABI_REF_SRC:-$srcdir}
+                               abirefcloneopts=
+                               if [ -d $abirefsrc ]; then
+                                       abirefcloneopts="--local --no-hardlinks"
+                               fi
+                               git clone $abirefcloneopts \
                                        --single-branch \
                                        -b $DPDK_ABI_REF_VERSION \
                                        $abirefsrc $abirefdir/src


>  DPDK_ABI_REF_VERSION=v22.11.1     \
>  DPDK_ABI_REF_DIR=/tmp/dpdk-abiref \
>  ./devtools/test-meson-builds.sh
> `
>
> When 'DPDK_ABI_REF_SRC' is not defined, script behaves as it did
> previously.
>
> Other alternative to using 'DPDK_ABI_REF_SRC' variable is adding that
> other repo as a new 'remote' to the exiting git repository.



-- 
David Marchand


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 2/2] devtools: configure source repo to use as ABI reference
  2022-12-09  8:22   ` David Marchand
@ 2022-12-09  8:44     ` Ferruh Yigit
  0 siblings, 0 replies; 10+ messages in thread
From: Ferruh Yigit @ 2022-12-09  8:44 UTC (permalink / raw)
  To: David Marchand; +Cc: Thomas Monjalon, Bruce Richardson, dev, Akhil Goyal

On 12/9/2022 8:22 AM, David Marchand wrote:
> On Tue, Dec 6, 2022 at 1:24 PM Ferruh Yigit <ferruh.yigit@amd.com> wrote:
>>
>> By default 'test-meson-builds.sh' script clones the repository which the
>> script is in, and selects a configured branch ('DPDK_ABI_REF_VERSION')
>> as a reference for ABI check.
>>
>> This patch enables selecting different repository to close for reference
>> using 'DPDK_ABI_REF_SRC' environment variable.
>>
>> It is possible to put these variables to 'devel.config' config file, or
>> provide via command line, like:
>> `
>>  DPDK_ABI_REF_SRC=~/dpdk-stable/   \
> 
> DPDK_ABI_REF_SRC could be passed as a remote repository.
> This should remove the need for any "git remote" configuration.
> 
> $ DPDK_ABI_REF_SRC=https://dpdk.org/git/dpdk-stable
> DPDK_ABI_REF_VERSION=v22.11.1 ./devtools/test-meson-builds.sh
> 

+1 to 'DPDK_ABI_REF_SRC' accept either folder or remote git repo.

Can you send a v2 with your sign off added, or do you want me send a v2?

> 
> diff --git a/devtools/test-meson-builds.sh b/devtools/test-meson-builds.sh
> index 406bf4e184..48f4e52df3 100755
> --- a/devtools/test-meson-builds.sh
> +++ b/devtools/test-meson-builds.sh
> @@ -18,8 +18,8 @@ srcdir=$(dirname $(readlink -f $0))/..
>  #
>  # - DPDK_MESON_OPTIONS
>  #
> -# - DPDK_ABI_REF_SRC
>  # - DPDK_ABI_REF_DIR
> +# - DPDK_ABI_REF_SRC
>  # - DPDK_ABI_REF_VERSION
>  #
>  # - DPDK_BUILD_TEST_EXAMPLES
> @@ -186,10 +186,14 @@ build () # <directory> <target cc | cross file>
> <ABI check> [meson options]
>         if [ -n "$DPDK_ABI_REF_VERSION" -a "$abicheck" = ABI ] ; then
>                 abirefdir=${DPDK_ABI_REF_DIR:-reference}/$DPDK_ABI_REF_VERSION
>                 if [ ! -d $abirefdir/$targetdir ]; then
> -                       abirefsrc=${DPDK_ABI_REF_SRC:-$srcdir}
>                         # clone current sources
>                         if [ ! -d $abirefdir/src ]; then
> -                               git clone --local --no-hardlinks \
> +                               abirefsrc=${DPDK_ABI_REF_SRC:-$srcdir}
> +                               abirefcloneopts=
> +                               if [ -d $abirefsrc ]; then
> +                                       abirefcloneopts="--local --no-hardlinks"
> +                               fi
> +                               git clone $abirefcloneopts \
>                                         --single-branch \
>                                         -b $DPDK_ABI_REF_VERSION \
>                                         $abirefsrc $abirefdir/src
> 
> 
>>  DPDK_ABI_REF_VERSION=v22.11.1     \
>>  DPDK_ABI_REF_DIR=/tmp/dpdk-abiref \
>>  ./devtools/test-meson-builds.sh
>> `
>>
>> When 'DPDK_ABI_REF_SRC' is not defined, script behaves as it did
>> previously.
>>
>> Other alternative to using 'DPDK_ABI_REF_SRC' variable is adding that
>> other repo as a new 'remote' to the exiting git repository.
> 
> 
> 


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 1/2] devtools: document test meson script config options
  2022-12-06 12:23 [PATCH 1/2] devtools: document test meson script config options Ferruh Yigit
  2022-12-06 12:23 ` [PATCH 2/2] devtools: configure source repo to use as ABI reference Ferruh Yigit
@ 2022-12-09  9:02 ` David Marchand
  2022-12-09  9:02   ` [PATCH v2 2/2] devtools: configure source repo to use as ABI reference David Marchand
  1 sibling, 1 reply; 10+ messages in thread
From: David Marchand @ 2022-12-09  9:02 UTC (permalink / raw)
  To: dev; +Cc: thomas, bruce.richardson, gakhil, Ferruh Yigit

From: Ferruh Yigit <ferruh.yigit@amd.com>

Document config options of script that can be provided by 'devel.config'
config file.

Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
---
 devtools/test-meson-builds.sh | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/devtools/test-meson-builds.sh b/devtools/test-meson-builds.sh
index 7efd5576fc..02541c19aa 100755
--- a/devtools/test-meson-builds.sh
+++ b/devtools/test-meson-builds.sh
@@ -12,6 +12,16 @@ PIPEFAIL=""
 set -o | grep -q pipefail && set -o pipefail && PIPEFAIL=1
 
 srcdir=$(dirname $(readlink -f $0))/..
+
+# Load config options:
+# - DPDK_BUILD_TEST_DIR
+#
+# - DPDK_MESON_OPTIONS
+#
+# - DPDK_ABI_REF_DIR
+# - DPDK_ABI_REF_VERSION
+#
+# - DPDK_BUILD_TEST_EXAMPLES
 . $srcdir/devtools/load-devel-config
 
 MESON=${MESON:-meson}
-- 
2.38.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 2/2] devtools: configure source repo to use as ABI reference
  2022-12-09  9:02 ` [PATCH v2 1/2] devtools: document test meson script config options David Marchand
@ 2022-12-09  9:02   ` David Marchand
  2022-12-21 15:02     ` David Marchand
  0 siblings, 1 reply; 10+ messages in thread
From: David Marchand @ 2022-12-09  9:02 UTC (permalink / raw)
  To: dev; +Cc: thomas, bruce.richardson, gakhil, Ferruh Yigit

From: Ferruh Yigit <ferruh.yigit@amd.com>

By default 'test-meson-builds.sh' script clones the repository which the
script is in, and selects a configured branch ('DPDK_ABI_REF_VERSION')
as a reference for ABI check.

This patch enables selecting different repository to clone for reference
using 'DPDK_ABI_REF_SRC' environment variable.
'DPDK_ABI_REF_SRC' may refer to a directory containing a cloned git
repository, or a remote git repository.

It is possible to put these variables to 'devel.config' config file, or
provide via command line, like:
`
 DPDK_ABI_REF_SRC=https://dpdk.org/git/dpdk-stable \
 DPDK_ABI_REF_VERSION=v22.11.1     \
 DPDK_ABI_REF_DIR=/tmp/dpdk-abiref \
 ./devtools/test-meson-builds.sh
`

When 'DPDK_ABI_REF_SRC' is not defined, script behaves as it did
previously.

Other alternative to using 'DPDK_ABI_REF_SRC' variable is adding that
other repo as a new 'remote' to the exiting git repository.

Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
---
Changes since v1:
- expanded DPDK_ABI_REF_SRC usage to "non-local" sources,

---
 devtools/test-meson-builds.sh | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/devtools/test-meson-builds.sh b/devtools/test-meson-builds.sh
index 02541c19aa..48f4e52df3 100755
--- a/devtools/test-meson-builds.sh
+++ b/devtools/test-meson-builds.sh
@@ -19,6 +19,7 @@ srcdir=$(dirname $(readlink -f $0))/..
 # - DPDK_MESON_OPTIONS
 #
 # - DPDK_ABI_REF_DIR
+# - DPDK_ABI_REF_SRC
 # - DPDK_ABI_REF_VERSION
 #
 # - DPDK_BUILD_TEST_EXAMPLES
@@ -187,10 +188,15 @@ build () # <directory> <target cc | cross file> <ABI check> [meson options]
 		if [ ! -d $abirefdir/$targetdir ]; then
 			# clone current sources
 			if [ ! -d $abirefdir/src ]; then
-				git clone --local --no-hardlinks \
+				abirefsrc=${DPDK_ABI_REF_SRC:-$srcdir}
+				abirefcloneopts=
+				if [ -d $abirefsrc ]; then
+					abirefcloneopts="--local --no-hardlinks"
+				fi
+				git clone $abirefcloneopts \
 					--single-branch \
 					-b $DPDK_ABI_REF_VERSION \
-					$srcdir $abirefdir/src
+					$abirefsrc $abirefdir/src
 			fi
 
 			rm -rf $abirefdir/build
-- 
2.38.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] devtools: configure source repo to use as ABI reference
  2022-12-09  9:02   ` [PATCH v2 2/2] devtools: configure source repo to use as ABI reference David Marchand
@ 2022-12-21 15:02     ` David Marchand
  0 siblings, 0 replies; 10+ messages in thread
From: David Marchand @ 2022-12-21 15:02 UTC (permalink / raw)
  To: dev; +Cc: thomas, bruce.richardson, gakhil, Ferruh Yigit

On Fri, Dec 9, 2022 at 10:02 AM David Marchand
<david.marchand@redhat.com> wrote:
>
> From: Ferruh Yigit <ferruh.yigit@amd.com>
>
> By default 'test-meson-builds.sh' script clones the repository which the
> script is in, and selects a configured branch ('DPDK_ABI_REF_VERSION')
> as a reference for ABI check.
>
> This patch enables selecting different repository to clone for reference
> using 'DPDK_ABI_REF_SRC' environment variable.
> 'DPDK_ABI_REF_SRC' may refer to a directory containing a cloned git
> repository, or a remote git repository.
>
> It is possible to put these variables to 'devel.config' config file, or
> provide via command line, like:
> `
>  DPDK_ABI_REF_SRC=https://dpdk.org/git/dpdk-stable \
>  DPDK_ABI_REF_VERSION=v22.11.1     \
>  DPDK_ABI_REF_DIR=/tmp/dpdk-abiref \
>  ./devtools/test-meson-builds.sh
> `
>
> When 'DPDK_ABI_REF_SRC' is not defined, script behaves as it did
> previously.
>
> Other alternative to using 'DPDK_ABI_REF_SRC' variable is adding that
> other repo as a new 'remote' to the exiting git repository.
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
> Acked-by: Akhil Goyal <gakhil@marvell.com>
> Signed-off-by: David Marchand <david.marchand@redhat.com>
> ---
> Changes since v1:
> - expanded DPDK_ABI_REF_SRC usage to "non-local" sources,

Series applied, thanks.


-- 
David Marchand


^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2022-12-21 15:02 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-06 12:23 [PATCH 1/2] devtools: document test meson script config options Ferruh Yigit
2022-12-06 12:23 ` [PATCH 2/2] devtools: configure source repo to use as ABI reference Ferruh Yigit
2022-12-08 18:14   ` [EXT] " Akhil Goyal
2022-12-08 19:43     ` Thomas Monjalon
2022-12-09  4:16       ` Akhil Goyal
2022-12-09  8:22   ` David Marchand
2022-12-09  8:44     ` Ferruh Yigit
2022-12-09  9:02 ` [PATCH v2 1/2] devtools: document test meson script config options David Marchand
2022-12-09  9:02   ` [PATCH v2 2/2] devtools: configure source repo to use as ABI reference David Marchand
2022-12-21 15:02     ` David Marchand

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).