From: Srikanth Yalavarthi <syalavarthi@marvell.com>
To: Srikanth Yalavarthi <syalavarthi@marvell.com>
Cc: <dev@dpdk.org>, <sshankarnara@marvell.com>, <jerinj@marvell.com>,
<aprabhu@marvell.com>
Subject: [PATCH v2 28/37] ml/cnxk: enable support for firmware error codes
Date: Thu, 8 Dec 2022 12:17:56 -0800 [thread overview]
Message-ID: <20221208201806.21893-29-syalavarthi@marvell.com> (raw)
In-Reply-To: <20221208201806.21893-1-syalavarthi@marvell.com>
Enabled support for error handling. Added error types and subtypes
supported by ML firmware. Enabled support to get device specific
error code and message for a completed ML request.
Signed-off-by: Srikanth Yalavarthi <syalavarthi@marvell.com>
---
v2:
* Fixed typos
drivers/ml/cnxk/cn10k_ml_dev.c | 4 +-
drivers/ml/cnxk/cn10k_ml_dev.h | 50 +++++++++++++-
drivers/ml/cnxk/cn10k_ml_ops.c | 117 ++++++++++++++++++++++++++++++---
drivers/ml/cnxk/cn10k_ml_ops.h | 2 +
4 files changed, 160 insertions(+), 13 deletions(-)
diff --git a/drivers/ml/cnxk/cn10k_ml_dev.c b/drivers/ml/cnxk/cn10k_ml_dev.c
index 805b037593..779734d6cd 100644
--- a/drivers/ml/cnxk/cn10k_ml_dev.c
+++ b/drivers/ml/cnxk/cn10k_ml_dev.c
@@ -261,7 +261,7 @@ cn10k_ml_fw_load_asim(struct cn10k_ml_fw *fw)
} while (plt_tsc_cycles() < timeout_cycle);
/* Check firmware load status, clean-up and exit on failure. */
- if ((!timeout) && (fw->req->result.error_code == 0)) {
+ if ((!timeout) && (fw->req->result.error_code.u64 == 0)) {
cn10k_ml_fw_print_info(fw);
} else {
/* Set ML to disable new jobs */
@@ -452,7 +452,7 @@ cn10k_ml_fw_load_cn10ka(struct cn10k_ml_fw *fw, void *buffer, uint64_t size)
} while (plt_tsc_cycles() < timeout_cycle);
/* Check firmware load status, clean-up and exit on failure. */
- if ((!timeout) && (fw->req->result.error_code == 0)) {
+ if ((!timeout) && (fw->req->result.error_code.u64 == 0)) {
cn10k_ml_fw_print_info(fw);
} else {
/* Set ML to disable new jobs */
diff --git a/drivers/ml/cnxk/cn10k_ml_dev.h b/drivers/ml/cnxk/cn10k_ml_dev.h
index 5096a26c40..f292078920 100644
--- a/drivers/ml/cnxk/cn10k_ml_dev.h
+++ b/drivers/ml/cnxk/cn10k_ml_dev.h
@@ -64,6 +64,54 @@ enum cn10k_ml_dev_state {
ML_CN10K_DEV_STATE_CLOSED
};
+/* ML error types enumeration */
+enum cn10k_ml_error_etype {
+ /* 0x0 */ ML_ETYPE_NO_ERROR = 0, /* No error */
+ /* 0x1 */ ML_ETYPE_FW_NONFATAL, /* Firmware non-fatal error */
+ /* 0x2 */ ML_ETYPE_HW_NONFATAL, /* Hardware non-fatal error */
+ /* 0x3 */ ML_ETYPE_HW_FATAL, /* Hardware fatal error */
+ /* 0x4 */ ML_ETYPE_HW_WARNING, /* Hardware warning */
+ /* 0x5 */ ML_ETYPE_DRIVER, /* Driver specific error */
+ /* 0x6 */ ML_ETYPE_UNKNOWN, /* Unknown error */
+};
+
+/* ML firmware non-fatal error sub-type */
+enum cn10k_ml_error_stype_fw_nf {
+ /* 0x0 */ ML_FW_ERR_NOERR = 0, /* No error */
+ /* 0x1 */ ML_FW_ERR_UNLOAD_ID_NOT_FOUND, /* Model ID not found during load */
+ /* 0x2 */ ML_FW_ERR_LOAD_LUT_OVERFLOW, /* Lookup table overflow at load */
+ /* 0x3 */ ML_FW_ERR_ID_IN_USE, /* Model ID already in use */
+ /* 0x4 */ ML_FW_ERR_INVALID_TILEMASK, /* Invalid OCM tilemask */
+ /* 0x5 */ ML_FW_ERR_RUN_LUT_OVERFLOW, /* Lookup table overflow at run */
+ /* 0x6 */ ML_FW_ERR_RUN_ID_NOT_FOUND, /* Model ID not found during run */
+ /* 0x7 */ ML_FW_ERR_COMMAND_NOTSUP, /* Unsupported command */
+ /* 0x8 */ ML_FW_ERR_DDR_ADDR_RANGE, /* DDR address out of range */
+ /* 0x9 */ ML_FW_ERR_NUM_BATCHES_INVALID, /* Invalid number of batches */
+ /* 0xA */ ML_FW_ERR_INSSYNC_TIMEOUT, /* INS sync timeout */
+};
+
+/* ML driver error sub-type */
+enum cn10k_ml_error_stype_driver {
+ /* 0x0 */ ML_DRIVER_ERR_NOERR = 0, /* No error */
+ /* 0x1 */ ML_DRIVER_ERR_UNKNOWN, /* Unable to determine error sub-type */
+ /* 0x2 */ ML_DRIVER_ERR_EXCEPTION, /* Firmware exception */
+ /* 0x3 */ ML_DRIVER_ERR_FW_ERROR, /* Unknown firmware error */
+};
+
+/* ML error structure */
+union cn10k_ml_error_code {
+ struct {
+ /* Error type */
+ uint64_t etype : 4;
+
+ /* Error sub-type */
+ uint64_t stype : 60;
+ } s;
+
+ /* WORD 0 */
+ uint64_t u64;
+};
+
/* ML Firmware stats */
struct cn10k_ml_fw_stats {
/* Firmware start cycle */
@@ -82,7 +130,7 @@ struct cn10k_ml_fw_stats {
/* ML result structure */
struct cn10k_ml_result {
/* Job error code */
- uint64_t error_code;
+ union cn10k_ml_error_code error_code;
/* Firmware stats */
struct cn10k_ml_fw_stats stats;
diff --git a/drivers/ml/cnxk/cn10k_ml_ops.c b/drivers/ml/cnxk/cn10k_ml_ops.c
index e7ee0774f2..d9eea21e12 100644
--- a/drivers/ml/cnxk/cn10k_ml_ops.c
+++ b/drivers/ml/cnxk/cn10k_ml_ops.c
@@ -23,6 +23,49 @@
#define ML_FLAGS_POLL_COMPL BIT(0)
#define ML_FLAGS_SSO_COMPL BIT(1)
+/* Error message length */
+#define ERRMSG_LEN 32
+
+/* Error type database */
+static const struct cn10k_ml_etype_db {
+ enum cn10k_ml_error_etype etype;
+ char name[ERRMSG_LEN];
+} ml_etype_db[] = {
+ {ML_ETYPE_NO_ERROR, "NO_ERROR"}, {ML_ETYPE_FW_NONFATAL, "FW_NON_FATAL"},
+ {ML_ETYPE_HW_NONFATAL, "HW_NON_FATAL"}, {ML_ETYPE_HW_FATAL, "HW_FATAL"},
+ {ML_ETYPE_HW_WARNING, "HW_WARNING"}, {ML_ETYPE_DRIVER, "DRIVER_ERROR"},
+ {ML_ETYPE_UNKNOWN, "UNKNOWN_ERROR"},
+};
+
+/* Hardware non-fatal error subtype database */
+static const struct cn10k_ml_stype_db_hw_nf {
+ enum cn10k_ml_error_stype_fw_nf stype;
+ char msg[ERRMSG_LEN];
+} ml_stype_db_hw_nf[] = {
+ {ML_FW_ERR_NOERR, "NO ERROR"},
+ {ML_FW_ERR_UNLOAD_ID_NOT_FOUND, "UNLOAD MODEL ID NOT FOUND"},
+ {ML_FW_ERR_LOAD_LUT_OVERFLOW, "LOAD LUT OVERFLOW"},
+ {ML_FW_ERR_ID_IN_USE, "MODEL ID IN USE"},
+ {ML_FW_ERR_INVALID_TILEMASK, "INVALID TILEMASK"},
+ {ML_FW_ERR_RUN_LUT_OVERFLOW, "RUN LUT OVERFLOW"},
+ {ML_FW_ERR_RUN_ID_NOT_FOUND, "RUN MODEL ID NOT FOUND"},
+ {ML_FW_ERR_COMMAND_NOTSUP, "COMMAND NOT SUPPORTED"},
+ {ML_FW_ERR_DDR_ADDR_RANGE, "DDR ADDRESS OUT OF RANGE"},
+ {ML_FW_ERR_NUM_BATCHES_INVALID, "INVALID BATCHES"},
+ {ML_FW_ERR_INSSYNC_TIMEOUT, "INSSYNC TIMEOUT"},
+};
+
+/* Driver error subtype database */
+static const struct cn10k_ml_stype_db_driver {
+ enum cn10k_ml_error_stype_driver stype;
+ char msg[ERRMSG_LEN];
+} ml_stype_db_driver[] = {
+ {ML_DRIVER_ERR_NOERR, "NO ERROR"},
+ {ML_DRIVER_ERR_UNKNOWN, "UNKNOWN ERROR"},
+ {ML_DRIVER_ERR_EXCEPTION, "FW EXCEPTION"},
+ {ML_DRIVER_ERR_FW_ERROR, "UNKNOWN FIRMWARE ERROR"},
+};
+
static void
print_line(FILE *fp, int len)
{
@@ -474,6 +517,7 @@ cn10k_ml_dev_configure(struct rte_ml_dev *dev, const struct rte_ml_dev_config *c
dev->enqueue_burst = cn10k_ml_enqueue_burst;
dev->dequeue_burst = cn10k_ml_dequeue_burst;
+ dev->op_error_get = cn10k_ml_op_error_get;
mldev->nb_models_loaded = 0;
mldev->state = ML_CN10K_DEV_STATE_CONFIGURED;
@@ -758,7 +802,7 @@ cn10k_ml_dev_selftest(struct rte_ml_dev *dev)
if (timeout) {
ret = -ETIME;
} else {
- if (req->result.error_code != 0)
+ if (req->result.error_code.u64 != 0)
ret = -1;
}
@@ -940,7 +984,7 @@ cn10k_ml_model_start(struct rte_ml_dev *dev, int16_t model_id)
req = model->req;
cn10k_ml_prep_sp_job_descriptor(mldev, model, req, ML_CN10K_JOB_TYPE_MODEL_START);
- req->result.error_code = 0x0;
+ req->result.error_code.u64 = 0x0;
req->result.user_ptr = NULL;
plt_write64(ML_CN10K_POLL_JOB_START, &req->status);
@@ -1021,7 +1065,7 @@ cn10k_ml_model_start(struct rte_ml_dev *dev, int16_t model_id)
if (job_dequeued) {
if (plt_read64(&req->status) == ML_CN10K_POLL_JOB_FINISH) {
- if (req->result.error_code == 0)
+ if (req->result.error_code.u64 == 0)
ret = 0;
else
ret = -1;
@@ -1083,7 +1127,7 @@ cn10k_ml_model_stop(struct rte_ml_dev *dev, int16_t model_id)
/* Prepare JD */
req = model->req;
cn10k_ml_prep_sp_job_descriptor(mldev, model, req, ML_CN10K_JOB_TYPE_MODEL_STOP);
- req->result.error_code = 0x0;
+ req->result.error_code.u64 = 0x0;
req->result.user_ptr = NULL;
plt_write64(ML_CN10K_POLL_JOB_START, &req->status);
@@ -1138,7 +1182,7 @@ cn10k_ml_model_stop(struct rte_ml_dev *dev, int16_t model_id)
if (job_dequeued) {
if (plt_read64(&req->status) == ML_CN10K_POLL_JOB_FINISH) {
- if (req->result.error_code == 0x0)
+ if (req->result.error_code.u64 == 0x0)
ret = 0;
else
ret = -1;
@@ -1429,12 +1473,30 @@ cn10k_ml_result_update(struct rte_ml_dev *dev, int qp_id, struct cn10k_ml_result
PLT_SET_USED(dev);
PLT_SET_USED(qp_id);
- op->impl_opaque = result->error_code;
+ struct cn10k_ml_dev *mldev;
- if (likely(result->error_code == 0))
+ if (likely(result->error_code.u64 == 0)) {
+ op->impl_opaque = result->error_code.u64;
op->status = RTE_ML_OP_STATUS_SUCCESS;
- else
+ } else {
+ /* Handle driver error */
+ if (result->error_code.s.etype == ML_ETYPE_DRIVER) {
+ mldev = dev->data->dev_private;
+
+ /* Check for exception */
+ if ((roc_ml_reg_read64(&mldev->roc, ML_SCRATCH_EXCEPTION_SP_C0) != 0) ||
+ (roc_ml_reg_read64(&mldev->roc, ML_SCRATCH_EXCEPTION_SP_C1) != 0))
+ result->error_code.s.stype = ML_DRIVER_ERR_EXCEPTION;
+ else if ((roc_ml_reg_read64(&mldev->roc, ML_CORE_INT_LO) != 0) ||
+ (roc_ml_reg_read64(&mldev->roc, ML_CORE_INT_HI) != 0))
+ result->error_code.s.stype = ML_DRIVER_ERR_FW_ERROR;
+ else
+ result->error_code.s.stype = ML_DRIVER_ERR_UNKNOWN;
+ }
+
+ op->impl_opaque = result->error_code.u64;
op->status = RTE_ML_OP_STATUS_ERROR;
+ }
op->user_ptr = result->user_ptr;
}
@@ -1471,6 +1533,7 @@ cn10k_ml_enqueue_burst(struct rte_ml_dev *dev, uint16_t qp_id, struct rte_ml_op
cn10k_ml_prep_fp_job_descriptor(dev, req, op);
memset(&req->result, 0, sizeof(struct cn10k_ml_result));
+ req->result.error_code.s.etype = ML_ETYPE_UNKNOWN;
req->result.user_ptr = op->user_ptr;
plt_write64(ML_CN10K_POLL_JOB_START, &req->status);
@@ -1518,8 +1581,12 @@ cn10k_ml_dequeue_burst(struct rte_ml_dev *dev, uint16_t qp_id, struct rte_ml_op
dequeue_req:
req = &queue->reqs[tail];
status = plt_read64(&req->status);
- if (unlikely(status != ML_CN10K_POLL_JOB_FINISH))
- goto empty_or_active;
+ if (unlikely(status != ML_CN10K_POLL_JOB_FINISH)) {
+ if (plt_tsc_cycles() < req->timeout)
+ goto empty_or_active;
+ else /* Timeout, set indication of driver error */
+ req->result.error_code.s.etype = ML_ETYPE_DRIVER;
+ }
cn10k_ml_result_update(dev, qp_id, &req->result, req->op);
ops[count] = req->op;
@@ -1536,6 +1603,35 @@ cn10k_ml_dequeue_burst(struct rte_ml_dev *dev, uint16_t qp_id, struct rte_ml_op
return count;
}
+__rte_hot int
+cn10k_ml_op_error_get(struct rte_ml_dev *dev, struct rte_ml_op *op, struct rte_ml_op_error *error)
+{
+ union cn10k_ml_error_code *error_code;
+ char msg[RTE_ML_STR_MAX];
+
+ PLT_SET_USED(dev);
+
+ error_code = (union cn10k_ml_error_code *)&op->impl_opaque;
+
+ /* Copy error message */
+ plt_strlcpy(msg, ml_etype_db[error_code->s.etype].name, sizeof(msg));
+
+ /* Copy sub error message */
+ if (error_code->s.etype == ML_ETYPE_HW_NONFATAL) {
+ strcat(msg, " : ");
+ strcat(msg, ml_stype_db_hw_nf[error_code->s.stype].msg);
+ }
+
+ if (error_code->s.etype == ML_ETYPE_DRIVER) {
+ strcat(msg, " : ");
+ strcat(msg, ml_stype_db_driver[error_code->s.stype].msg);
+ }
+
+ plt_strlcpy(error->message, msg, sizeof(error->message));
+
+ return 0;
+}
+
__rte_hot int
cn10k_ml_inference_sync(struct rte_ml_dev *dev, struct rte_ml_op *op)
{
@@ -1552,6 +1648,7 @@ cn10k_ml_inference_sync(struct rte_ml_dev *dev, struct rte_ml_op *op)
cn10k_ml_prep_fp_job_descriptor(dev, req, op);
memset(&req->result, 0, sizeof(struct cn10k_ml_result));
+ req->result.error_code.s.etype = ML_ETYPE_UNKNOWN;
req->result.user_ptr = op->user_ptr;
plt_write64(ML_CN10K_POLL_JOB_START, &req->status);
diff --git a/drivers/ml/cnxk/cn10k_ml_ops.h b/drivers/ml/cnxk/cn10k_ml_ops.h
index c23e484b69..5f00cb2a60 100644
--- a/drivers/ml/cnxk/cn10k_ml_ops.h
+++ b/drivers/ml/cnxk/cn10k_ml_ops.h
@@ -75,6 +75,8 @@ __rte_hot uint16_t cn10k_ml_enqueue_burst(struct rte_ml_dev *dev, uint16_t qp_id
struct rte_ml_op **ops, uint16_t nb_ops);
__rte_hot uint16_t cn10k_ml_dequeue_burst(struct rte_ml_dev *dev, uint16_t qp_id,
struct rte_ml_op **ops, uint16_t nb_ops);
+__rte_hot int cn10k_ml_op_error_get(struct rte_ml_dev *dev, struct rte_ml_op *op,
+ struct rte_ml_op_error *error);
__rte_hot int cn10k_ml_inference_sync(struct rte_ml_dev *dev, struct rte_ml_op *op);
#endif /* _CN10K_ML_OPS_H_ */
--
2.17.1
next prev parent reply other threads:[~2022-12-08 20:21 UTC|newest]
Thread overview: 253+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-08 20:01 [PATCH v1 00/37] Implementation of ML CNXK driver Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 01/37] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 02/37] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 03/37] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 04/37] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 05/37] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 06/37] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 07/37] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 08/37] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 09/37] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 10/37] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 11/37] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 12/37] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 13/37] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 14/37] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 15/37] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 16/37] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 17/37] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 18/37] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 19/37] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 20/37] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 21/37] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 22/37] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 23/37] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 24/37] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 25/37] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 26/37] ml/cnxk: dequeue " Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 27/37] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 28/37] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 29/37] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 30/37] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 31/37] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 32/37] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 33/37] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 34/37] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 35/37] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 36/37] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 37/37] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 00/37] Implementation of ML CNXK driver Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 01/37] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 02/37] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 03/37] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 04/37] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 05/37] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 06/37] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 07/37] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 08/37] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 09/37] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 10/37] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 11/37] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 12/37] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 13/37] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 14/37] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 15/37] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 16/37] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 17/37] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 18/37] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 19/37] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 20/37] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 21/37] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 22/37] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 23/37] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 24/37] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 25/37] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 26/37] ml/cnxk: dequeue " Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 27/37] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2022-12-08 20:17 ` Srikanth Yalavarthi [this message]
2022-12-08 20:17 ` [PATCH v2 29/37] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 30/37] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 31/37] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 32/37] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 33/37] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 34/37] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 35/37] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 36/37] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 37/37] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 00/38] Implementation of ML CNXK driver Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 01/38] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 02/38] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 03/38] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 04/38] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 05/38] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 06/38] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 07/38] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 08/38] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 09/38] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 10/38] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 11/38] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 12/38] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 13/38] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 14/38] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 15/38] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 16/38] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 17/38] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 18/38] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 19/38] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 20/38] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 21/38] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 22/38] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 23/38] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 24/38] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 25/38] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 26/38] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 27/38] ml/cnxk: dequeue " Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 28/38] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 29/38] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 30/38] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 31/38] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 32/38] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 33/38] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 34/38] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 35/38] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 36/38] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 37/38] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 38/38] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2022-12-20 21:23 ` [PATCH v3 00/38] Implementation of ML CNXK driver Stephen Hemminger
2022-12-21 4:44 ` Jerin Jacob
2023-02-01 9:22 ` [PATCH v4 00/39] " Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 01/39] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 02/39] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 03/39] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 04/39] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 05/39] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 06/39] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 07/39] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 08/39] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 09/39] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 10/39] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 11/39] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 12/39] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 13/39] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 14/39] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 15/39] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 16/39] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 17/39] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 18/39] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 19/39] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 20/39] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 21/39] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 22/39] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 23/39] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 24/39] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 25/39] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 26/39] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 27/39] ml/cnxk: dequeue " Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 28/39] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 29/39] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 30/39] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 31/39] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 32/39] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 33/39] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 34/39] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 35/39] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 36/39] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 37/39] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 38/39] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 39/39] ml/cnxk: enable support for configurable ocm page Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 00/39] Implementation of ML CNXK driver Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 01/39] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 02/39] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2023-03-09 22:06 ` Thomas Monjalon
2023-03-10 8:25 ` [EXT] " Srikanth Yalavarthi
2023-03-10 9:28 ` Thomas Monjalon
2023-03-10 9:31 ` Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 03/39] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 04/39] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 05/39] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 06/39] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 07/39] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 08/39] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 09/39] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 10/39] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 11/39] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 12/39] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 13/39] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 14/39] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 15/39] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 16/39] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 17/39] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 18/39] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 19/39] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 20/39] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 21/39] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 22/39] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 23/39] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 24/39] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 25/39] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 26/39] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 27/39] ml/cnxk: dequeue " Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 28/39] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2023-02-27 10:42 ` Prince Takkar
2023-02-07 16:07 ` [PATCH v5 29/39] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 30/39] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 31/39] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 32/39] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2023-02-15 12:33 ` Shivah Shankar Shankar Narayan Rao
2023-02-16 4:40 ` Prince Takkar
2023-02-07 16:07 ` [PATCH v5 33/39] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 34/39] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 35/39] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2023-03-01 9:01 ` Prince Takkar
2023-02-07 16:07 ` [PATCH v5 36/39] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 37/39] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 38/39] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2023-02-15 12:34 ` Shivah Shankar Shankar Narayan Rao
2023-02-16 4:41 ` Prince Takkar
2023-02-07 16:07 ` [PATCH v5 39/39] ml/cnxk: enable support for configurable ocm page Srikanth Yalavarthi
2023-02-15 12:33 ` Shivah Shankar Shankar Narayan Rao
2023-02-16 4:37 ` Prince Takkar
2023-03-02 6:08 ` [PATCH v5 00/39] Implementation of ML CNXK driver Prince Takkar
2023-03-10 8:19 ` [PATCH v6 " Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 01/39] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 02/39] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 03/39] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 04/39] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 05/39] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 06/39] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 07/39] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 08/39] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 09/39] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 10/39] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 11/39] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 12/39] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 13/39] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 14/39] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 15/39] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 16/39] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 17/39] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 18/39] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 19/39] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 20/39] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 21/39] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 22/39] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 23/39] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 24/39] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 25/39] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 26/39] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 27/39] ml/cnxk: dequeue " Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 28/39] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 29/39] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 30/39] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 31/39] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 32/39] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 33/39] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 34/39] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 35/39] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 36/39] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 37/39] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 38/39] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 39/39] ml/cnxk: add support for configurable ocm page Srikanth Yalavarthi
2023-03-10 9:31 ` [PATCH v6 00/39] Implementation of ML CNXK driver Thomas Monjalon
2023-03-10 10:30 ` [EXT] " Srikanth Yalavarthi
2023-03-10 15:24 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221208201806.21893-29-syalavarthi@marvell.com \
--to=syalavarthi@marvell.com \
--cc=aprabhu@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=sshankarnara@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).