DPDK patches and discussions
 help / color / mirror / Atom feed
From: Srikanth Yalavarthi <syalavarthi@marvell.com>
To: Srikanth Yalavarthi <syalavarthi@marvell.com>
Cc: <dev@dpdk.org>, <sshankarnara@marvell.com>, <jerinj@marvell.com>,
	<aprabhu@marvell.com>, <ptakkar@marvell.com>,
	<pshukla@marvell.com>
Subject: [PATCH v5 29/39] ml/cnxk: enable support for firmware error codes
Date: Tue, 7 Feb 2023 08:07:09 -0800	[thread overview]
Message-ID: <20230207160719.1307-30-syalavarthi@marvell.com> (raw)
In-Reply-To: <20230207160719.1307-1-syalavarthi@marvell.com>

Enabled support for error handling. Added error types and subtypes
supported by ML firmware. Enabled support to get device specific
error code and message for a completed ML request.

Signed-off-by: Srikanth Yalavarthi <syalavarthi@marvell.com>
---
 drivers/ml/cnxk/cn10k_ml_dev.c |   4 +-
 drivers/ml/cnxk/cn10k_ml_dev.h |  50 +++++++++++++-
 drivers/ml/cnxk/cn10k_ml_ops.c | 117 ++++++++++++++++++++++++++++++---
 drivers/ml/cnxk/cn10k_ml_ops.h |   2 +
 4 files changed, 160 insertions(+), 13 deletions(-)

diff --git a/drivers/ml/cnxk/cn10k_ml_dev.c b/drivers/ml/cnxk/cn10k_ml_dev.c
index 837f006bf0..76ed853a3c 100644
--- a/drivers/ml/cnxk/cn10k_ml_dev.c
+++ b/drivers/ml/cnxk/cn10k_ml_dev.c
@@ -261,7 +261,7 @@ cn10k_ml_fw_load_asim(struct cn10k_ml_fw *fw)
 	} while (plt_tsc_cycles() < timeout_cycle);
 
 	/* Check firmware load status, clean-up and exit on failure. */
-	if ((!timeout) && (fw->req->result.error_code == 0)) {
+	if ((!timeout) && (fw->req->result.error_code.u64 == 0)) {
 		cn10k_ml_fw_print_info(fw);
 	} else {
 		/* Set ML to disable new jobs */
@@ -452,7 +452,7 @@ cn10k_ml_fw_load_cn10ka(struct cn10k_ml_fw *fw, void *buffer, uint64_t size)
 	} while (plt_tsc_cycles() < timeout_cycle);
 
 	/* Check firmware load status, clean-up and exit on failure. */
-	if ((!timeout) && (fw->req->result.error_code == 0)) {
+	if ((!timeout) && (fw->req->result.error_code.u64 == 0)) {
 		cn10k_ml_fw_print_info(fw);
 	} else {
 		/* Set ML to disable new jobs */
diff --git a/drivers/ml/cnxk/cn10k_ml_dev.h b/drivers/ml/cnxk/cn10k_ml_dev.h
index 8f6bc24370..604a200e26 100644
--- a/drivers/ml/cnxk/cn10k_ml_dev.h
+++ b/drivers/ml/cnxk/cn10k_ml_dev.h
@@ -64,6 +64,54 @@ enum cn10k_ml_dev_state {
 	ML_CN10K_DEV_STATE_CLOSED
 };
 
+/* Error types enumeration */
+enum cn10k_ml_error_etype {
+	/* 0x0 */ ML_ETYPE_NO_ERROR = 0, /* No error */
+	/* 0x1 */ ML_ETYPE_FW_NONFATAL,	 /* Firmware non-fatal error */
+	/* 0x2 */ ML_ETYPE_HW_NONFATAL,	 /* Hardware non-fatal error */
+	/* 0x3 */ ML_ETYPE_HW_FATAL,	 /* Hardware fatal error */
+	/* 0x4 */ ML_ETYPE_HW_WARNING,	 /* Hardware warning */
+	/* 0x5 */ ML_ETYPE_DRIVER,	 /* Driver specific error */
+	/* 0x6 */ ML_ETYPE_UNKNOWN,	 /* Unknown error */
+};
+
+/* Firmware non-fatal error sub-type */
+enum cn10k_ml_error_stype_fw_nf {
+	/* 0x0 */ ML_FW_ERR_NOERR = 0,		 /* No error */
+	/* 0x1 */ ML_FW_ERR_UNLOAD_ID_NOT_FOUND, /* Model ID not found during load */
+	/* 0x2 */ ML_FW_ERR_LOAD_LUT_OVERFLOW,	 /* Lookup table overflow at load */
+	/* 0x3 */ ML_FW_ERR_ID_IN_USE,		 /* Model ID already in use */
+	/* 0x4 */ ML_FW_ERR_INVALID_TILEMASK,	 /* Invalid OCM tilemask */
+	/* 0x5 */ ML_FW_ERR_RUN_LUT_OVERFLOW,	 /* Lookup table overflow at run */
+	/* 0x6 */ ML_FW_ERR_RUN_ID_NOT_FOUND,	 /* Model ID not found during run */
+	/* 0x7 */ ML_FW_ERR_COMMAND_NOTSUP,	 /* Unsupported command */
+	/* 0x8 */ ML_FW_ERR_DDR_ADDR_RANGE,	 /* DDR address out of range */
+	/* 0x9 */ ML_FW_ERR_NUM_BATCHES_INVALID, /* Invalid number of batches */
+	/* 0xA */ ML_FW_ERR_INSSYNC_TIMEOUT,	 /* INS sync timeout */
+};
+
+/* Driver error sub-type */
+enum cn10k_ml_error_stype_driver {
+	/* 0x0 */ ML_DRIVER_ERR_NOERR = 0, /* No error */
+	/* 0x1 */ ML_DRIVER_ERR_UNKNOWN,   /* Unable to determine error sub-type */
+	/* 0x2 */ ML_DRIVER_ERR_EXCEPTION, /* Firmware exception */
+	/* 0x3 */ ML_DRIVER_ERR_FW_ERROR,  /* Unknown firmware error */
+};
+
+/* Error structure */
+union cn10k_ml_error_code {
+	struct {
+		/* Error type */
+		uint64_t etype : 4;
+
+		/* Error sub-type */
+		uint64_t stype : 60;
+	} s;
+
+	/* WORD 0 */
+	uint64_t u64;
+};
+
 /* Firmware stats */
 struct cn10k_ml_fw_stats {
 	/* Firmware start cycle */
@@ -82,7 +130,7 @@ struct cn10k_ml_fw_stats {
 /* Result structure */
 struct cn10k_ml_result {
 	/* Job error code */
-	uint64_t error_code;
+	union cn10k_ml_error_code error_code;
 
 	/* Firmware stats */
 	struct cn10k_ml_fw_stats stats;
diff --git a/drivers/ml/cnxk/cn10k_ml_ops.c b/drivers/ml/cnxk/cn10k_ml_ops.c
index 87778c37bb..23a9ca4ff2 100644
--- a/drivers/ml/cnxk/cn10k_ml_ops.c
+++ b/drivers/ml/cnxk/cn10k_ml_ops.c
@@ -23,6 +23,49 @@
 #define ML_FLAGS_POLL_COMPL BIT(0)
 #define ML_FLAGS_SSO_COMPL  BIT(1)
 
+/* Error message length */
+#define ERRMSG_LEN 32
+
+/* Error type database */
+static const struct cn10k_ml_etype_db {
+	enum cn10k_ml_error_etype etype;
+	char name[ERRMSG_LEN];
+} ml_etype_db[] = {
+	{ML_ETYPE_NO_ERROR, "NO_ERROR"},	{ML_ETYPE_FW_NONFATAL, "FW_NON_FATAL"},
+	{ML_ETYPE_HW_NONFATAL, "HW_NON_FATAL"}, {ML_ETYPE_HW_FATAL, "HW_FATAL"},
+	{ML_ETYPE_HW_WARNING, "HW_WARNING"},	{ML_ETYPE_DRIVER, "DRIVER_ERROR"},
+	{ML_ETYPE_UNKNOWN, "UNKNOWN_ERROR"},
+};
+
+/* Hardware non-fatal error subtype database */
+static const struct cn10k_ml_stype_db_hw_nf {
+	enum cn10k_ml_error_stype_fw_nf stype;
+	char msg[ERRMSG_LEN];
+} ml_stype_db_hw_nf[] = {
+	{ML_FW_ERR_NOERR, "NO ERROR"},
+	{ML_FW_ERR_UNLOAD_ID_NOT_FOUND, "UNLOAD MODEL ID NOT FOUND"},
+	{ML_FW_ERR_LOAD_LUT_OVERFLOW, "LOAD LUT OVERFLOW"},
+	{ML_FW_ERR_ID_IN_USE, "MODEL ID IN USE"},
+	{ML_FW_ERR_INVALID_TILEMASK, "INVALID TILEMASK"},
+	{ML_FW_ERR_RUN_LUT_OVERFLOW, "RUN LUT OVERFLOW"},
+	{ML_FW_ERR_RUN_ID_NOT_FOUND, "RUN MODEL ID NOT FOUND"},
+	{ML_FW_ERR_COMMAND_NOTSUP, "COMMAND NOT SUPPORTED"},
+	{ML_FW_ERR_DDR_ADDR_RANGE, "DDR ADDRESS OUT OF RANGE"},
+	{ML_FW_ERR_NUM_BATCHES_INVALID, "INVALID BATCHES"},
+	{ML_FW_ERR_INSSYNC_TIMEOUT, "INSSYNC TIMEOUT"},
+};
+
+/* Driver error subtype database */
+static const struct cn10k_ml_stype_db_driver {
+	enum cn10k_ml_error_stype_driver stype;
+	char msg[ERRMSG_LEN];
+} ml_stype_db_driver[] = {
+	{ML_DRIVER_ERR_NOERR, "NO ERROR"},
+	{ML_DRIVER_ERR_UNKNOWN, "UNKNOWN ERROR"},
+	{ML_DRIVER_ERR_EXCEPTION, "FW EXCEPTION"},
+	{ML_DRIVER_ERR_FW_ERROR, "UNKNOWN FIRMWARE ERROR"},
+};
+
 static void
 print_line(FILE *fp, int len)
 {
@@ -474,6 +517,7 @@ cn10k_ml_dev_configure(struct rte_ml_dev *dev, const struct rte_ml_dev_config *c
 
 	dev->enqueue_burst = cn10k_ml_enqueue_burst;
 	dev->dequeue_burst = cn10k_ml_dequeue_burst;
+	dev->op_error_get = cn10k_ml_op_error_get;
 
 	mldev->nb_models_loaded = 0;
 	mldev->state = ML_CN10K_DEV_STATE_CONFIGURED;
@@ -758,7 +802,7 @@ cn10k_ml_dev_selftest(struct rte_ml_dev *dev)
 	if (timeout) {
 		ret = -ETIME;
 	} else {
-		if (req->result.error_code != 0)
+		if (req->result.error_code.u64 != 0)
 			ret = -1;
 	}
 
@@ -936,7 +980,7 @@ cn10k_ml_model_start(struct rte_ml_dev *dev, uint16_t model_id)
 	/* Prepare JD */
 	req = model->req;
 	cn10k_ml_prep_sp_job_descriptor(mldev, model, req, ML_CN10K_JOB_TYPE_MODEL_START);
-	req->result.error_code = 0x0;
+	req->result.error_code.u64 = 0x0;
 	req->result.user_ptr = NULL;
 
 	plt_write64(ML_CN10K_POLL_JOB_START, &req->status);
@@ -1017,7 +1061,7 @@ cn10k_ml_model_start(struct rte_ml_dev *dev, uint16_t model_id)
 
 	if (job_dequeued) {
 		if (plt_read64(&req->status) == ML_CN10K_POLL_JOB_FINISH) {
-			if (req->result.error_code == 0)
+			if (req->result.error_code.u64 == 0)
 				ret = 0;
 			else
 				ret = -1;
@@ -1079,7 +1123,7 @@ cn10k_ml_model_stop(struct rte_ml_dev *dev, uint16_t model_id)
 	/* Prepare JD */
 	req = model->req;
 	cn10k_ml_prep_sp_job_descriptor(mldev, model, req, ML_CN10K_JOB_TYPE_MODEL_STOP);
-	req->result.error_code = 0x0;
+	req->result.error_code.u64 = 0x0;
 	req->result.user_ptr = NULL;
 
 	plt_write64(ML_CN10K_POLL_JOB_START, &req->status);
@@ -1134,7 +1178,7 @@ cn10k_ml_model_stop(struct rte_ml_dev *dev, uint16_t model_id)
 
 	if (job_dequeued) {
 		if (plt_read64(&req->status) == ML_CN10K_POLL_JOB_FINISH) {
-			if (req->result.error_code == 0x0)
+			if (req->result.error_code.u64 == 0x0)
 				ret = 0;
 			else
 				ret = -1;
@@ -1426,12 +1470,30 @@ cn10k_ml_result_update(struct rte_ml_dev *dev, int qp_id, struct cn10k_ml_result
 	PLT_SET_USED(dev);
 	PLT_SET_USED(qp_id);
 
-	op->impl_opaque = result->error_code;
+	struct cn10k_ml_dev *mldev;
 
-	if (likely(result->error_code == 0))
+	if (likely(result->error_code.u64 == 0)) {
+		op->impl_opaque = result->error_code.u64;
 		op->status = RTE_ML_OP_STATUS_SUCCESS;
-	else
+	} else {
+		/* Handle driver error */
+		if (result->error_code.s.etype == ML_ETYPE_DRIVER) {
+			mldev = dev->data->dev_private;
+
+			/* Check for exception */
+			if ((roc_ml_reg_read64(&mldev->roc, ML_SCRATCH_EXCEPTION_SP_C0) != 0) ||
+			    (roc_ml_reg_read64(&mldev->roc, ML_SCRATCH_EXCEPTION_SP_C1) != 0))
+				result->error_code.s.stype = ML_DRIVER_ERR_EXCEPTION;
+			else if ((roc_ml_reg_read64(&mldev->roc, ML_CORE_INT_LO) != 0) ||
+				 (roc_ml_reg_read64(&mldev->roc, ML_CORE_INT_HI) != 0))
+				result->error_code.s.stype = ML_DRIVER_ERR_FW_ERROR;
+			else
+				result->error_code.s.stype = ML_DRIVER_ERR_UNKNOWN;
+		}
+
+		op->impl_opaque = result->error_code.u64;
 		op->status = RTE_ML_OP_STATUS_ERROR;
+	}
 
 	op->user_ptr = result->user_ptr;
 }
@@ -1468,6 +1530,7 @@ cn10k_ml_enqueue_burst(struct rte_ml_dev *dev, uint16_t qp_id, struct rte_ml_op
 	cn10k_ml_prep_fp_job_descriptor(dev, req, op);
 
 	memset(&req->result, 0, sizeof(struct cn10k_ml_result));
+	req->result.error_code.s.etype = ML_ETYPE_UNKNOWN;
 	req->result.user_ptr = op->user_ptr;
 
 	plt_write64(ML_CN10K_POLL_JOB_START, &req->status);
@@ -1515,8 +1578,12 @@ cn10k_ml_dequeue_burst(struct rte_ml_dev *dev, uint16_t qp_id, struct rte_ml_op
 dequeue_req:
 	req = &queue->reqs[tail];
 	status = plt_read64(&req->status);
-	if (unlikely(status != ML_CN10K_POLL_JOB_FINISH))
-		goto empty_or_active;
+	if (unlikely(status != ML_CN10K_POLL_JOB_FINISH)) {
+		if (plt_tsc_cycles() < req->timeout)
+			goto empty_or_active;
+		else /* Timeout, set indication of driver error */
+			req->result.error_code.s.etype = ML_ETYPE_DRIVER;
+	}
 
 	cn10k_ml_result_update(dev, qp_id, &req->result, req->op);
 	ops[count] = req->op;
@@ -1533,6 +1600,35 @@ cn10k_ml_dequeue_burst(struct rte_ml_dev *dev, uint16_t qp_id, struct rte_ml_op
 	return count;
 }
 
+__rte_hot int
+cn10k_ml_op_error_get(struct rte_ml_dev *dev, struct rte_ml_op *op, struct rte_ml_op_error *error)
+{
+	union cn10k_ml_error_code *error_code;
+	char msg[RTE_ML_STR_MAX];
+
+	PLT_SET_USED(dev);
+
+	error_code = (union cn10k_ml_error_code *)&op->impl_opaque;
+
+	/* Copy error message */
+	plt_strlcpy(msg, ml_etype_db[error_code->s.etype].name, sizeof(msg));
+
+	/* Copy sub error message */
+	if (error_code->s.etype == ML_ETYPE_HW_NONFATAL) {
+		strcat(msg, " : ");
+		strcat(msg, ml_stype_db_hw_nf[error_code->s.stype].msg);
+	}
+
+	if (error_code->s.etype == ML_ETYPE_DRIVER) {
+		strcat(msg, " : ");
+		strcat(msg, ml_stype_db_driver[error_code->s.stype].msg);
+	}
+
+	plt_strlcpy(error->message, msg, sizeof(error->message));
+
+	return 0;
+}
+
 __rte_hot int
 cn10k_ml_inference_sync(struct rte_ml_dev *dev, struct rte_ml_op *op)
 {
@@ -1549,6 +1645,7 @@ cn10k_ml_inference_sync(struct rte_ml_dev *dev, struct rte_ml_op *op)
 	cn10k_ml_prep_fp_job_descriptor(dev, req, op);
 
 	memset(&req->result, 0, sizeof(struct cn10k_ml_result));
+	req->result.error_code.s.etype = ML_ETYPE_UNKNOWN;
 	req->result.user_ptr = op->user_ptr;
 
 	plt_write64(ML_CN10K_POLL_JOB_START, &req->status);
diff --git a/drivers/ml/cnxk/cn10k_ml_ops.h b/drivers/ml/cnxk/cn10k_ml_ops.h
index 7c35bf7539..1784900cff 100644
--- a/drivers/ml/cnxk/cn10k_ml_ops.h
+++ b/drivers/ml/cnxk/cn10k_ml_ops.h
@@ -75,6 +75,8 @@ __rte_hot uint16_t cn10k_ml_enqueue_burst(struct rte_ml_dev *dev, uint16_t qp_id
 					  struct rte_ml_op **ops, uint16_t nb_ops);
 __rte_hot uint16_t cn10k_ml_dequeue_burst(struct rte_ml_dev *dev, uint16_t qp_id,
 					  struct rte_ml_op **ops, uint16_t nb_ops);
+__rte_hot int cn10k_ml_op_error_get(struct rte_ml_dev *dev, struct rte_ml_op *op,
+				    struct rte_ml_op_error *error);
 __rte_hot int cn10k_ml_inference_sync(struct rte_ml_dev *dev, struct rte_ml_op *op);
 
 #endif /* _CN10K_ML_OPS_H_ */
-- 
2.17.1


  parent reply	other threads:[~2023-02-07 16:11 UTC|newest]

Thread overview: 253+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-08 20:01 [PATCH v1 00/37] Implementation of ML CNXK driver Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 01/37] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 02/37] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 03/37] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 04/37] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 05/37] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 06/37] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 07/37] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 08/37] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 09/37] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 10/37] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 11/37] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 12/37] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 13/37] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 14/37] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 15/37] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 16/37] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 17/37] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 18/37] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 19/37] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 20/37] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 21/37] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 22/37] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 23/37] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 24/37] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 25/37] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 26/37] ml/cnxk: dequeue " Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 27/37] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 28/37] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 29/37] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 30/37] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 31/37] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 32/37] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 33/37] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 34/37] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 35/37] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 36/37] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 37/37] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 00/37] Implementation of ML CNXK driver Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 01/37] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 02/37] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 03/37] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 04/37] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 05/37] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 06/37] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 07/37] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 08/37] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 09/37] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 10/37] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 11/37] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 12/37] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 13/37] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 14/37] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 15/37] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 16/37] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 17/37] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 18/37] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 19/37] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 20/37] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 21/37] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 22/37] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 23/37] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 24/37] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 25/37] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 26/37] ml/cnxk: dequeue " Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 27/37] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 28/37] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 29/37] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 30/37] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2022-12-08 20:17   ` [PATCH v2 31/37] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2022-12-08 20:18   ` [PATCH v2 32/37] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2022-12-08 20:18   ` [PATCH v2 33/37] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2022-12-08 20:18   ` [PATCH v2 34/37] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2022-12-08 20:18   ` [PATCH v2 35/37] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2022-12-08 20:18   ` [PATCH v2 36/37] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2022-12-08 20:18   ` [PATCH v2 37/37] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2022-12-20 19:26   ` [PATCH v3 00/38] Implementation of ML CNXK driver Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 01/38] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 02/38] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 03/38] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 04/38] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 05/38] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 06/38] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 07/38] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 08/38] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 09/38] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 10/38] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 11/38] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 12/38] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 13/38] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 14/38] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 15/38] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 16/38] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 17/38] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 18/38] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 19/38] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 20/38] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 21/38] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 22/38] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 23/38] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 24/38] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 25/38] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 26/38] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 27/38] ml/cnxk: dequeue " Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 28/38] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 29/38] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 30/38] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 31/38] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 32/38] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 33/38] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 34/38] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 35/38] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 36/38] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 37/38] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2022-12-20 19:26     ` [PATCH v3 38/38] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2022-12-20 21:23     ` [PATCH v3 00/38] Implementation of ML CNXK driver Stephen Hemminger
2022-12-21  4:44       ` Jerin Jacob
2023-02-01  9:22 ` [PATCH v4 00/39] " Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 01/39] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 02/39] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 03/39] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 04/39] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 05/39] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 06/39] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 07/39] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 08/39] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 09/39] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 10/39] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 11/39] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 12/39] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 13/39] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 14/39] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 15/39] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 16/39] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 17/39] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 18/39] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 19/39] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 20/39] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 21/39] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 22/39] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 23/39] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 24/39] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 25/39] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 26/39] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 27/39] ml/cnxk: dequeue " Srikanth Yalavarthi
2023-02-01  9:22   ` [PATCH v4 28/39] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 29/39] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 30/39] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 31/39] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 32/39] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 33/39] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 34/39] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 35/39] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 36/39] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 37/39] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 38/39] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2023-02-01  9:23   ` [PATCH v4 39/39] ml/cnxk: enable support for configurable ocm page Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 00/39] Implementation of ML CNXK driver Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 01/39] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 02/39] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2023-03-09 22:06     ` Thomas Monjalon
2023-03-10  8:25       ` [EXT] " Srikanth Yalavarthi
2023-03-10  9:28         ` Thomas Monjalon
2023-03-10  9:31           ` Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 03/39] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 04/39] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 05/39] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 06/39] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 07/39] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 08/39] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 09/39] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 10/39] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 11/39] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 12/39] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 13/39] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 14/39] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 15/39] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 16/39] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 17/39] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 18/39] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2023-02-07 16:06   ` [PATCH v5 19/39] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 20/39] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 21/39] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 22/39] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 23/39] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 24/39] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 25/39] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 26/39] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 27/39] ml/cnxk: dequeue " Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 28/39] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2023-02-27 10:42     ` Prince Takkar
2023-02-07 16:07   ` Srikanth Yalavarthi [this message]
2023-02-07 16:07   ` [PATCH v5 30/39] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 31/39] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 32/39] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2023-02-15 12:33     ` Shivah Shankar Shankar Narayan Rao
2023-02-16  4:40     ` Prince Takkar
2023-02-07 16:07   ` [PATCH v5 33/39] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 34/39] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 35/39] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2023-03-01  9:01     ` Prince Takkar
2023-02-07 16:07   ` [PATCH v5 36/39] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 37/39] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2023-02-07 16:07   ` [PATCH v5 38/39] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2023-02-15 12:34     ` Shivah Shankar Shankar Narayan Rao
2023-02-16  4:41     ` Prince Takkar
2023-02-07 16:07   ` [PATCH v5 39/39] ml/cnxk: enable support for configurable ocm page Srikanth Yalavarthi
2023-02-15 12:33     ` Shivah Shankar Shankar Narayan Rao
2023-02-16  4:37     ` Prince Takkar
2023-03-02  6:08   ` [PATCH v5 00/39] Implementation of ML CNXK driver Prince Takkar
2023-03-10  8:19 ` [PATCH v6 " Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 01/39] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 02/39] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 03/39] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 04/39] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 05/39] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 06/39] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 07/39] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 08/39] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 09/39] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 10/39] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 11/39] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 12/39] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 13/39] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 14/39] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 15/39] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 16/39] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 17/39] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 18/39] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 19/39] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 20/39] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 21/39] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 22/39] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2023-03-10  8:19   ` [PATCH v6 23/39] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 24/39] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 25/39] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 26/39] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 27/39] ml/cnxk: dequeue " Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 28/39] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 29/39] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 30/39] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 31/39] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 32/39] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 33/39] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 34/39] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 35/39] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 36/39] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 37/39] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 38/39] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2023-03-10  8:20   ` [PATCH v6 39/39] ml/cnxk: add support for configurable ocm page Srikanth Yalavarthi
2023-03-10  9:31   ` [PATCH v6 00/39] Implementation of ML CNXK driver Thomas Monjalon
2023-03-10 10:30     ` [EXT] " Srikanth Yalavarthi
2023-03-10 15:24   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230207160719.1307-30-syalavarthi@marvell.com \
    --to=syalavarthi@marvell.com \
    --cc=aprabhu@marvell.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=pshukla@marvell.com \
    --cc=ptakkar@marvell.com \
    --cc=sshankarnara@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).