From: Naga Harish K S V <s.v.naga.harish.k@intel.com>
To: jerinj@marvell.com, erik.g.carrillo@intel.com,
abhinandan.gujjar@intel.com
Cc: dev@dpdk.org, jay.jayatheerthan@intel.com
Subject: [PATCH v4 1/3] eventdev/eth_rx: add params set/get APIs
Date: Thu, 9 Feb 2023 22:58:14 -0600 [thread overview]
Message-ID: <20230210045816.3039312-1-s.v.naga.harish.k@intel.com> (raw)
In-Reply-To: <20230123180458.486189-1-s.v.naga.harish.k@intel.com>
The adapter configuration parameters defined in the
``struct rte_event_eth_rx_adapter_runtime_params`` can be configured
and retrieved using ``rte_event_eth_rx_adapter_runtime_params_set`` and
``rte_event_eth_tx_adapter_runtime_params_get`` respectively.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
---
app/test/test_event_eth_rx_adapter.c | 113 ++++++++++++++++++
.../prog_guide/event_ethernet_rx_adapter.rst | 11 ++
lib/eventdev/rte_event_eth_rx_adapter.c | 86 ++++++++++++-
lib/eventdev/rte_event_eth_rx_adapter.h | 101 +++++++++++++++-
lib/eventdev/version.map | 2 +
5 files changed, 311 insertions(+), 2 deletions(-)
diff --git a/app/test/test_event_eth_rx_adapter.c b/app/test/test_event_eth_rx_adapter.c
index 1da7782560..cfe6052d7e 100644
--- a/app/test/test_event_eth_rx_adapter.c
+++ b/app/test/test_event_eth_rx_adapter.c
@@ -1198,6 +1198,117 @@ adapter_intrq_instance_get(void)
return TEST_SUCCESS;
}
+static int
+adapter_get_set_params(void)
+{
+ int err;
+ struct rte_event_eth_rx_adapter_runtime_params in_params;
+ struct rte_event_eth_rx_adapter_runtime_params out_params;
+ struct rte_event_eth_rx_adapter_queue_conf queue_config = {0};
+ struct rte_event ev;
+
+ ev.queue_id = 0;
+ ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
+ ev.priority = 0;
+ ev.flow_id = 1;
+
+ queue_config.rx_queue_flags =
+ RTE_EVENT_ETH_RX_ADAPTER_QUEUE_FLOW_ID_VALID;
+ queue_config.ev = ev;
+ queue_config.servicing_weight = 1;
+
+ err = rte_event_eth_rx_adapter_queue_add(TEST_INST_ID,
+ TEST_ETHDEV_ID, 0,
+ &queue_config);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_eth_rx_adapter_runtime_params_init(&in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ err = rte_event_eth_rx_adapter_runtime_params_init(&out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ /* Case 1: Get the default value of mbufs processed by Rx adapter */
+ err = rte_event_eth_rx_adapter_runtime_params_get(TEST_INST_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ /* Case 2: Set max_nb_rx = 32 (=BATCH_SEIZE) */
+ in_params.max_nb_rx = 32;
+
+ err = rte_event_eth_rx_adapter_runtime_params_set(TEST_INST_ID,
+ &in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_eth_rx_adapter_runtime_params_get(TEST_INST_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ TEST_ASSERT(in_params.max_nb_rx == out_params.max_nb_rx,
+ "Expected %u got %u",
+ in_params.max_nb_rx, out_params.max_nb_rx);
+
+ /* Case 3: Set max_nb_rx = 192 */
+ in_params.max_nb_rx = 192;
+
+ err = rte_event_eth_rx_adapter_runtime_params_set(TEST_INST_ID,
+ &in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_eth_rx_adapter_runtime_params_get(TEST_INST_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ TEST_ASSERT(in_params.max_nb_rx == out_params.max_nb_rx,
+ "Expected %u got %u",
+ in_params.max_nb_rx, out_params.max_nb_rx);
+
+ /* Case 4: Set max_nb_rx = 256 */
+ in_params.max_nb_rx = 256;
+
+ err = rte_event_eth_rx_adapter_runtime_params_set(TEST_INST_ID,
+ &in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_eth_rx_adapter_runtime_params_get(TEST_INST_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ TEST_ASSERT(in_params.max_nb_rx == out_params.max_nb_rx,
+ "Expected %u got %u",
+ in_params.max_nb_rx, out_params.max_nb_rx);
+
+ /* Case 5: Set max_nb_rx = 30(<BATCH_SIZE) */
+ in_params.max_nb_rx = 30;
+
+ err = rte_event_eth_rx_adapter_runtime_params_set(TEST_INST_ID,
+ &in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_eth_rx_adapter_runtime_params_get(TEST_INST_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ TEST_ASSERT(in_params.max_nb_rx == out_params.max_nb_rx,
+ "Expected %u got %u",
+ in_params.max_nb_rx, out_params.max_nb_rx);
+
+ /* Case 6: Set max_nb_rx = 512 */
+ in_params.max_nb_rx = 512;
+
+ err = rte_event_eth_rx_adapter_runtime_params_set(TEST_INST_ID,
+ &in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_eth_rx_adapter_runtime_params_get(TEST_INST_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ TEST_ASSERT(in_params.max_nb_rx == out_params.max_nb_rx,
+ "Expected %u got %u",
+ in_params.max_nb_rx, out_params.max_nb_rx);
+
+ err = rte_event_eth_rx_adapter_queue_del(TEST_INST_ID,
+ TEST_ETHDEV_ID, 0);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ return TEST_SUCCESS;
+}
+
static struct unit_test_suite event_eth_rx_tests = {
.suite_name = "rx event eth adapter test suite",
.setup = testsuite_setup,
@@ -1218,6 +1329,8 @@ static struct unit_test_suite event_eth_rx_tests = {
adapter_queue_stats_test),
TEST_CASE_ST(adapter_create, adapter_free,
adapter_pollq_instance_get),
+ TEST_CASE_ST(adapter_create, adapter_free,
+ adapter_get_set_params),
TEST_CASES_END() /**< NULL terminate unit test array */
}
};
diff --git a/doc/guides/prog_guide/event_ethernet_rx_adapter.rst b/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
index 461eca566f..aefc61f326 100644
--- a/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
+++ b/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
@@ -185,6 +185,17 @@ flags for handling received packets, event queue identifier, scheduler type,
event priority, polling frequency of the receive queue and flow identifier
in struct ``rte_event_eth_rx_adapter_queue_conf``.
+Set/Get adapter runtime configuration parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The runtime configuration parameters of adapter can be set/read using
+``rte_event_eth_rx_adapter_runtime_params_set()`` and
+``rte_event_eth_rx_adapter_runtime_params_get()`` respectively. The parameters that
+can be set/read are defined in ``struct rte_event_eth_rx_adapter_runtime_params``.
+
+``rte_event_eth_rx_adapter_runtime_parmas_get()`` function retrieves the configuration
+parameters that are defined in ``struct rte_event_eth_rx_adapter_runtime_params``.
+
Getting and resetting Adapter queue stats
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/lib/eventdev/rte_event_eth_rx_adapter.c b/lib/eventdev/rte_event_eth_rx_adapter.c
index b5b4ffebd3..425d768e02 100644
--- a/lib/eventdev/rte_event_eth_rx_adapter.c
+++ b/lib/eventdev/rte_event_eth_rx_adapter.c
@@ -1554,7 +1554,7 @@ rxa_default_conf_cb(uint8_t id, uint8_t dev_id,
}
conf->event_port_id = port_id;
- conf->max_nb_rx = 128;
+ conf->max_nb_rx = RXA_NB_RX_WORK_DEFAULT;
if (started)
ret = rte_event_dev_start(dev_id);
rx_adapter->default_cb_arg = 1;
@@ -3461,6 +3461,90 @@ rte_event_eth_rx_adapter_instance_get(uint16_t eth_dev_id,
return -EINVAL;
}
+static int
+rxa_caps_check(struct event_eth_rx_adapter *rxa)
+{
+ uint16_t eth_dev_id;
+ uint32_t caps = 0;
+ int ret;
+
+ if (!rxa->nb_queues)
+ return -EINVAL;
+
+ /* The eth_dev used is always of same type.
+ * Hence eth_dev_id is taken from first entry of poll array.
+ */
+ eth_dev_id = rxa->eth_rx_poll[0].eth_dev_id;
+ ret = rte_event_eth_rx_adapter_caps_get(rxa->eventdev_id,
+ eth_dev_id,
+ &caps);
+ if (ret) {
+ RTE_EDEV_LOG_ERR("Failed to get adapter caps edev %" PRIu8
+ "eth port %" PRIu16, rxa->eventdev_id, eth_dev_id);
+ return ret;
+ }
+
+ if (caps & RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT)
+ return -ENOTSUP;
+
+ return 0;
+}
+
+int
+rte_event_eth_rx_adapter_runtime_params_set(uint8_t id,
+ struct rte_event_eth_rx_adapter_runtime_params *params)
+{
+ struct event_eth_rx_adapter *rxa;
+ int ret;
+
+ if (params == NULL)
+ return -EINVAL;
+
+ if (rxa_memzone_lookup())
+ return -ENOMEM;
+
+ rxa = rxa_id_to_adapter(id);
+ if (rxa == NULL)
+ return -EINVAL;
+
+ ret = rxa_caps_check(rxa);
+ if (ret)
+ return ret;
+
+ rte_spinlock_lock(&rxa->rx_lock);
+ rxa->max_nb_rx = params->max_nb_rx;
+ rte_spinlock_unlock(&rxa->rx_lock);
+
+ return 0;
+}
+
+int
+rte_event_eth_rx_adapter_runtime_params_get(uint8_t id,
+ struct rte_event_eth_rx_adapter_runtime_params *params)
+{
+ struct event_eth_rx_adapter *rxa;
+ int ret;
+
+ if (params == NULL)
+ return -EINVAL;
+
+ if (rxa_memzone_lookup())
+ return -ENOMEM;
+
+ rxa = rxa_id_to_adapter(id);
+ if (rxa == NULL)
+ return -EINVAL;
+
+ ret = rxa_caps_check(rxa);
+ if (ret)
+ return ret;
+
+ params->max_nb_rx = rxa->max_nb_rx;
+
+ return 0;
+}
+
+/* RX-adapter telemetry callbacks */
#define RXA_ADD_DICT(stats, s) rte_tel_data_add_dict_uint(d, #s, stats.s)
static int
diff --git a/lib/eventdev/rte_event_eth_rx_adapter.h b/lib/eventdev/rte_event_eth_rx_adapter.h
index f4652f40e8..9f781a5f69 100644
--- a/lib/eventdev/rte_event_eth_rx_adapter.h
+++ b/lib/eventdev/rte_event_eth_rx_adapter.h
@@ -39,10 +39,21 @@
* - rte_event_eth_rx_adapter_queue_stats_reset()
* - rte_event_eth_rx_adapter_event_port_get()
* - rte_event_eth_rx_adapter_instance_get()
+ * - rte_event_eth_rx_adapter_runtime_params_get()
+ * - rte_event_eth_rx_adapter_runtime_params_set()
*
* The application creates an ethernet to event adapter using
* rte_event_eth_rx_adapter_create_ext() or rte_event_eth_rx_adapter_create()
* or rte_event_eth_rx_adapter_create_with_params() functions.
+ *
+ * rte_event_eth_rx_adapter_create() or rte_event_eth_adapter_create_with_params()
+ * configures the adapter with default value of maximum packets processed per
+ * iteration to RXA_NB_RX_WORK_DEFAULT(128).
+ * rte_event_eth_rx_adapter_runtime_params_set() allows to re-configure maximum
+ * packets processed per iteration. This is alternative to using
+ * rte_event_eth_rx_adapter_create_ext() with parameter
+ * rte_event_eth_rx_adapter_conf::max_nb_rx
+ *
* The adapter needs to know which ethernet rx queues to poll for mbufs as well
* as event device parameters such as the event queue identifier, event
* priority and scheduling type that the adapter should use when constructing
@@ -121,6 +132,11 @@ struct rte_event_eth_rx_adapter_conf {
*/
};
+#define RXA_NB_RX_WORK_DEFAULT 128
+/**< The default value for maximum number of packets processed by service
+ * based adapter per each call.
+ */
+
/**
* Function type used for adapter configuration callback. The callback is
* used to fill in members of the struct rte_event_eth_rx_adapter_conf, this
@@ -299,6 +315,19 @@ struct rte_event_eth_rx_adapter_params {
/**< flag to indicate that event buffer is separate for each queue */
};
+/**
+ * Adapter configuration parameters
+ */
+struct rte_event_eth_rx_adapter_runtime_params {
+ uint32_t max_nb_rx;
+ /**< The adapter can return early if it has processed at least
+ * max_nb_rx mbufs. This isn't treated as a requirement; batching may
+ * cause the adapter to process more than max_nb_rx mbufs.
+ */
+ uint32_t rsvd[15];
+ /**< Reserved fields for future use */
+};
+
/**
*
* Callback function invoked by the SW adapter before it continues
@@ -377,7 +406,7 @@ int rte_event_eth_rx_adapter_create_ext(uint8_t id, uint8_t dev_id,
* Create a new ethernet Rx event adapter with the specified identifier.
* This function uses an internal configuration function that creates an event
* port. This default function reconfigures the event device with an
- * additional event port and setups up the event port using the port_config
+ * additional event port and setup the event port using the port_config
* parameter passed into this function. In case the application needs more
* control in configuration of the service, it should use the
* rte_event_eth_rx_adapter_create_ext() version.
@@ -743,6 +772,76 @@ rte_event_eth_rx_adapter_instance_get(uint16_t eth_dev_id,
uint16_t rx_queue_id,
uint8_t *rxa_inst_id);
+/**
+ * Initialize the adapter runtime configuration parameters with default values
+ *
+ * @param params
+ * A pointer to structure of type struct rte_event_eth_rx_adapter_runtime_params
+ *
+ * @return
+ * - 0: Success
+ * - <0: Error code on failure
+ */
+__rte_experimental
+static inline int
+rte_event_eth_rx_adapter_runtime_params_init(
+ struct rte_event_eth_rx_adapter_runtime_params *params)
+{
+ if (params == NULL)
+ return -EINVAL;
+
+ memset(params, 0, sizeof(struct rte_event_eth_rx_adapter_runtime_params));
+ params->max_nb_rx = RXA_NB_RX_WORK_DEFAULT;
+
+ return 0;
+}
+
+/**
+ * Set the adapter runtime configuration parameters
+ *
+ * This API is to be used after adding at least one queue to the adapter
+ * and is supported only for service based adapter.
+ *
+ * @param id
+ * Adapter identifier
+ *
+ * @param params
+ * A pointer to structure of type struct rte_event_eth_rx_adapter_runtime_params
+ * with configuration parameter values. This structure can be initialized using
+ * rte_event_eth_rx_adapter_runtime_params_init() to default values or
+ * application may reset this structure and update the required fields.
+ *
+ * @return
+ * - 0: Success
+ * - <0: Error code on failure
+ */
+__rte_experimental
+int
+rte_event_eth_rx_adapter_runtime_params_set(uint8_t id,
+ struct rte_event_eth_rx_adapter_runtime_params *params);
+
+/**
+ * Get the adapter runtime configuration parameters
+ *
+ * This API is to be used after adding at least one queue to the adapter
+ * and is supported only for service based adapter.
+ *
+ * @param id
+ * Adapter identifier
+ *
+ * @param[out] params
+ * A pointer to structure of type struct rte_event_eth_rx_adapter_runtime_params
+ * containing valid adapter parameters when return value is 0.
+ *
+ * @return
+ * - 0: Success
+ * - <0: Error code on failure
+ */
+__rte_experimental
+int
+rte_event_eth_rx_adapter_runtime_params_get(uint8_t id,
+ struct rte_event_eth_rx_adapter_runtime_params *params);
+
#ifdef __cplusplus
}
#endif
diff --git a/lib/eventdev/version.map b/lib/eventdev/version.map
index 3add5e3088..da97db794f 100644
--- a/lib/eventdev/version.map
+++ b/lib/eventdev/version.map
@@ -121,6 +121,8 @@ EXPERIMENTAL {
rte_event_eth_tx_adapter_queue_stop;
# added in 23.03
+ rte_event_eth_rx_adapter_runtime_params_get;
+ rte_event_eth_rx_adapter_runtime_params_set;
rte_event_timer_remaining_ticks_get;
};
--
2.25.1
next prev parent reply other threads:[~2023-02-10 4:58 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-07 16:18 [PATCH " Naga Harish K S V
2023-01-07 16:18 ` [PATCH 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-01-07 16:18 ` [PATCH 3/3] eventdev/crypto: " Naga Harish K S V
2023-01-18 10:22 ` [PATCH 1/3] eventdev/eth_rx: " Jerin Jacob
2023-01-20 8:58 ` Naga Harish K, S V
2023-01-20 9:32 ` Jerin Jacob
2023-01-20 10:33 ` Naga Harish K, S V
2023-01-23 9:31 ` Jerin Jacob
2023-01-23 18:07 ` Naga Harish K, S V
2023-01-23 18:04 ` [PATCH v2 " Naga Harish K S V
2023-01-23 18:04 ` [PATCH v2 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-01-23 18:04 ` [PATCH v2 3/3] eventdev/crypto: " Naga Harish K S V
2023-01-24 4:29 ` [PATCH v2 1/3] eventdev/eth_rx: " Jerin Jacob
2023-01-24 13:07 ` Naga Harish K, S V
2023-01-25 4:12 ` Jerin Jacob
2023-01-25 9:52 ` Naga Harish K, S V
2023-01-25 10:38 ` Jerin Jacob
2023-01-25 16:32 ` Naga Harish K, S V
2023-01-28 10:53 ` Jerin Jacob
2023-01-28 17:21 ` Stephen Hemminger
2023-01-30 9:56 ` Naga Harish K, S V
2023-01-30 14:43 ` Jerin Jacob
2023-02-02 16:12 ` Naga Harish K, S V
2023-02-03 9:44 ` Jerin Jacob
2023-02-06 6:21 ` Naga Harish K, S V
2023-02-06 16:38 ` Jerin Jacob
2023-02-09 17:00 ` Naga Harish K, S V
2023-02-09 16:57 ` [PATCH v3 " Naga Harish K S V
2023-02-09 16:57 ` [PATCH v3 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-09 16:57 ` [PATCH v3 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 1:55 ` [PATCH v3 1/3] eventdev/eth_rx: " Naga Harish K S V
2023-02-10 1:55 ` [PATCH v3 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 1:55 ` [PATCH v3 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 4:58 ` Naga Harish K S V [this message]
2023-02-10 4:58 ` [PATCH v4 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 4:58 ` [PATCH v4 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 6:30 ` [PATCH v4 1/3] eventdev/eth_rx: " Jerin Jacob
2023-02-10 13:33 ` [PATCH v5 " Naga Harish K S V
2023-02-10 13:33 ` [PATCH v5 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 13:33 ` [PATCH v5 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 13:58 ` [PATCH v5 1/3] eventdev/eth_rx: " Jerin Jacob
2023-02-10 17:42 ` Naga Harish K, S V
2023-02-10 13:46 ` Naga Harish K S V
2023-02-10 13:46 ` [PATCH v5 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 14:05 ` Jerin Jacob
2023-02-10 15:01 ` Naga Harish K, S V
2023-02-10 15:24 ` Jerin Jacob
2023-02-10 17:41 ` Naga Harish K, S V
2023-02-10 13:46 ` [PATCH v5 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 17:37 ` [PATCH v6 1/3] eventdev/eth_rx: " Naga Harish K S V
2023-02-10 17:37 ` [PATCH v6 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 17:37 ` [PATCH v6 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-13 5:08 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230210045816.3039312-1-s.v.naga.harish.k@intel.com \
--to=s.v.naga.harish.k@intel.com \
--cc=abhinandan.gujjar@intel.com \
--cc=dev@dpdk.org \
--cc=erik.g.carrillo@intel.com \
--cc=jay.jayatheerthan@intel.com \
--cc=jerinj@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).