From: Naga Harish K S V <s.v.naga.harish.k@intel.com>
To: jerinj@marvell.com, erik.g.carrillo@intel.com,
abhinandan.gujjar@intel.com
Cc: dev@dpdk.org, jay.jayatheerthan@intel.com
Subject: [PATCH v5 3/3] eventdev/crypto: add params set/get APIs
Date: Fri, 10 Feb 2023 07:46:46 -0600 [thread overview]
Message-ID: <20230210134646.3407253-3-s.v.naga.harish.k@intel.com> (raw)
In-Reply-To: <20230210134646.3407253-1-s.v.naga.harish.k@intel.com>
The adapter runtime configuration parameters defined in the
struct rte_event_crypto_adapter_runtime_params can be configured
and retrieved using rte_event_crypto_adapter_runtime_params_set
and rte_event_eth_rx_adapter_runtime_params_get respectively.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
---
app/test/test_event_crypto_adapter.c | 109 ++++++++++++++++++
.../prog_guide/event_crypto_adapter.rst | 8 ++
lib/eventdev/rte_event_crypto_adapter.c | 101 ++++++++++++++++
lib/eventdev/rte_event_crypto_adapter.h | 80 +++++++++++++
lib/eventdev/version.map | 3 +
5 files changed, 301 insertions(+)
diff --git a/app/test/test_event_crypto_adapter.c b/app/test/test_event_crypto_adapter.c
index a38e389abd..264d6f731e 100644
--- a/app/test/test_event_crypto_adapter.c
+++ b/app/test/test_event_crypto_adapter.c
@@ -272,6 +272,111 @@ test_crypto_adapter_stats(void)
return TEST_SUCCESS;
}
+static int
+test_crypto_adapter_params(void)
+{
+ int err;
+ struct rte_event_crypto_adapter_runtime_params in_params;
+ struct rte_event_crypto_adapter_runtime_params out_params;
+ uint32_t cap;
+ struct rte_event_crypto_adapter_queue_conf queue_conf = {
+ .ev = response_info,
+ };
+
+ err = rte_event_crypto_adapter_caps_get(evdev, TEST_CDEV_ID, &cap);
+ TEST_ASSERT_SUCCESS(err, "Failed to get adapter capabilities\n");
+
+ if (cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND) {
+ err = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID,
+ TEST_CDEV_ID, TEST_CDEV_QP_ID, &queue_conf);
+ } else
+ err = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID,
+ TEST_CDEV_ID, TEST_CDEV_QP_ID, NULL);
+
+ TEST_ASSERT_SUCCESS(err, "Failed to add queue pair\n");
+
+ err = rte_event_crypto_adapter_runtime_params_init(&in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ err = rte_event_crypto_adapter_runtime_params_init(&out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ /* Case 1: Get the default value of mbufs processed by adapter */
+ err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ /* Case 2: Set max_nb = 32 (=BATCH_SEIZE) */
+ in_params.max_nb = 32;
+
+ err = rte_event_crypto_adapter_runtime_params_set(TEST_ADAPTER_ID,
+ &in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ TEST_ASSERT(in_params.max_nb == out_params.max_nb, "Expected %u got %u",
+ in_params.max_nb, out_params.max_nb);
+
+ /* Case 3: Set max_nb = 192 */
+ in_params.max_nb = 192;
+
+ err = rte_event_crypto_adapter_runtime_params_set(TEST_ADAPTER_ID,
+ &in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ TEST_ASSERT(in_params.max_nb == out_params.max_nb, "Expected %u got %u",
+ in_params.max_nb, out_params.max_nb);
+
+ /* Case 4: Set max_nb = 256 */
+ in_params.max_nb = 256;
+
+ err = rte_event_crypto_adapter_runtime_params_set(TEST_ADAPTER_ID,
+ &in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ TEST_ASSERT(in_params.max_nb == out_params.max_nb, "Expected %u got %u",
+ in_params.max_nb, out_params.max_nb);
+
+ /* Case 5: Set max_nb = 30(<BATCH_SIZE) */
+ in_params.max_nb = 30;
+
+ err = rte_event_crypto_adapter_runtime_params_set(TEST_ADAPTER_ID,
+ &in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ TEST_ASSERT(in_params.max_nb == out_params.max_nb, "Expected %u got %u",
+ in_params.max_nb, out_params.max_nb);
+
+ /* Case 6: Set max_nb = 512 */
+ in_params.max_nb = 512;
+
+ err = rte_event_crypto_adapter_runtime_params_set(TEST_ADAPTER_ID,
+ &in_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_crypto_adapter_runtime_params_get(TEST_ADAPTER_ID,
+ &out_params);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+ TEST_ASSERT(in_params.max_nb == out_params.max_nb, "Expected %u got %u",
+ in_params.max_nb, out_params.max_nb);
+
+ err = rte_event_crypto_adapter_queue_pair_del(TEST_ADAPTER_ID,
+ TEST_CDEV_ID, TEST_CDEV_QP_ID);
+ TEST_ASSERT_SUCCESS(err, "Failed to delete add queue pair\n");
+
+ return TEST_SUCCESS;
+}
+
static int
test_op_forward_mode(uint8_t session_less)
{
@@ -1454,6 +1559,10 @@ static struct unit_test_suite functional_testsuite = {
test_crypto_adapter_free,
test_crypto_adapter_stats),
+ TEST_CASE_ST(test_crypto_adapter_create,
+ test_crypto_adapter_free,
+ test_crypto_adapter_params),
+
TEST_CASE_ST(test_crypto_adapter_conf_op_forward_mode,
test_crypto_adapter_stop,
test_session_with_op_forward_mode),
diff --git a/doc/guides/prog_guide/event_crypto_adapter.rst b/doc/guides/prog_guide/event_crypto_adapter.rst
index 46b3dc2f1c..1b6d4a0966 100644
--- a/doc/guides/prog_guide/event_crypto_adapter.rst
+++ b/doc/guides/prog_guide/event_crypto_adapter.rst
@@ -350,3 +350,11 @@ in struct ``rte_event_crypto_adapter_stats``. The received packet and
enqueued event counts are a sum of the counts from the eventdev PMD callbacks
if the callback is supported, and the counts maintained by the service function,
if one exists.
+
+Set/Get adapter runtime configuration parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The runtime configuration parameters of adapter can be set/get using
+``rte_event_crypto_adapter_runtime_params_set()`` and
+``rte_event_crypto_adapter_runtime_params_get()`` respectively. The parameters that
+can be set/get are defined in ``struct rte_event_crypto_adapter_runtime_params``.
diff --git a/lib/eventdev/rte_event_crypto_adapter.c b/lib/eventdev/rte_event_crypto_adapter.c
index 7f0a25a4cc..f6c1e5380d 100644
--- a/lib/eventdev/rte_event_crypto_adapter.c
+++ b/lib/eventdev/rte_event_crypto_adapter.c
@@ -1335,6 +1335,107 @@ rte_event_crypto_adapter_stats_reset(uint8_t id)
return 0;
}
+int
+rte_event_crypto_adapter_runtime_params_init(
+ struct rte_event_crypto_adapter_runtime_params *params)
+{
+ if (params == NULL)
+ return -EINVAL;
+
+ memset(params, 0, sizeof(*params));
+ params->max_nb = DEFAULT_MAX_NB;
+
+ return 0;
+}
+
+static int
+crypto_adapter_cap_check(struct event_crypto_adapter *adapter)
+{
+ int ret;
+ uint32_t caps;
+
+ if (!adapter->nb_qps)
+ return -EINVAL;
+ ret = rte_event_crypto_adapter_caps_get(adapter->eventdev_id,
+ adapter->next_cdev_id,
+ &caps);
+ if (ret) {
+ RTE_EDEV_LOG_ERR("Failed to get adapter caps dev %" PRIu8
+ " cdev %" PRIu8, adapter->eventdev_id,
+ adapter->next_cdev_id);
+ return ret;
+ }
+
+ if ((caps & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD) ||
+ (caps & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW))
+ return -ENOTSUP;
+
+ return 0;
+}
+
+int
+rte_event_crypto_adapter_runtime_params_set(uint8_t id,
+ struct rte_event_crypto_adapter_runtime_params *params)
+{
+ struct event_crypto_adapter *adapter;
+ int ret;
+
+ if (eca_memzone_lookup())
+ return -ENOMEM;
+
+ EVENT_CRYPTO_ADAPTER_ID_VALID_OR_ERR_RET(id, -EINVAL);
+
+ if (params == NULL) {
+ RTE_EDEV_LOG_ERR("params pointer is NULL\n");
+ return -EINVAL;
+ }
+
+ adapter = eca_id_to_adapter(id);
+ if (adapter == NULL)
+ return -EINVAL;
+
+ ret = crypto_adapter_cap_check(adapter);
+ if (ret)
+ return ret;
+
+ rte_spinlock_lock(&adapter->lock);
+ adapter->max_nb = params->max_nb;
+ rte_spinlock_unlock(&adapter->lock);
+
+ return 0;
+}
+
+int
+rte_event_crypto_adapter_runtime_params_get(uint8_t id,
+ struct rte_event_crypto_adapter_runtime_params *params)
+{
+ struct event_crypto_adapter *adapter;
+ int ret;
+
+ if (eca_memzone_lookup())
+ return -ENOMEM;
+
+
+ EVENT_CRYPTO_ADAPTER_ID_VALID_OR_ERR_RET(id, -EINVAL);
+
+ if (params == NULL) {
+ RTE_EDEV_LOG_ERR("params pointer is NULL\n");
+ return -EINVAL;
+ }
+
+ adapter = eca_id_to_adapter(id);
+ if (adapter == NULL)
+ return -EINVAL;
+
+ ret = crypto_adapter_cap_check(adapter);
+ if (ret)
+ return ret;
+
+ params->max_nb = adapter->max_nb;
+
+ return 0;
+}
+
int
rte_event_crypto_adapter_service_id_get(uint8_t id, uint32_t *service_id)
{
diff --git a/lib/eventdev/rte_event_crypto_adapter.h b/lib/eventdev/rte_event_crypto_adapter.h
index fad4543506..c1c4c62ef7 100644
--- a/lib/eventdev/rte_event_crypto_adapter.h
+++ b/lib/eventdev/rte_event_crypto_adapter.h
@@ -138,6 +138,9 @@
* - rte_event_crypto_adapter_stop()
* - rte_event_crypto_adapter_stats_get()
* - rte_event_crypto_adapter_stats_reset()
+ * - rte_event_crypto_adapter_runtime_params_get()
+ * - rte_event_crypto_adapter_runtime_params_init()
+ * - rte_event_crypto_adapter_runtime_params_set()
* The application creates an instance using rte_event_crypto_adapter_create()
* or rte_event_crypto_adapter_create_ext().
@@ -253,6 +256,20 @@ struct rte_event_crypto_adapter_conf {
*/
};
+/**
+ * Adapter runtime configuration parameters
+ */
+struct rte_event_crypto_adapter_runtime_params {
+ uint32_t max_nb;
+ /**< The adapter can return early if it has processed at least
+ * max_nb crypto ops. This isn't treated as a requirement; batching
+ * may cause the adapter to process more than max_nb crypto ops.
+ * This is valid for service based SW adapter only.
+ */
+ uint32_t rsvd[15];
+ /**< Reserved fields for future expansion */
+};
+
#define RTE_EVENT_CRYPTO_ADAPTER_EVENT_VECTOR 0x1
/**< This flag indicates that crypto operations processed on the crypto
* adapter need to be vectorized
@@ -608,6 +625,69 @@ rte_event_crypto_adapter_service_id_get(uint8_t id, uint32_t *service_id);
int
rte_event_crypto_adapter_event_port_get(uint8_t id, uint8_t *event_port_id);
+/**
+ * Initialize the adapter runtime configuration parameters
+ *
+ * @param params
+ * A pointer to structure of type struct rte_event_crypto_adapter_runtime_params
+ *
+ * @return
+ * - 0: Success
+ * - <0: Error code on failure
+ */
+__rte_experimental
+int
+rte_event_crypto_adapter_runtime_params_init(
+ struct rte_event_crypto_adapter_runtime_params *params);
+
+/**
+ * Set the adapter runtime configuration parameters
+ *
+ * This API needs to be called after adding at least one qp to the adapter
+ * and is supported only for the service-based adapter.
+ *
+ * @param id
+ * Adapter identifier
+ *
+ * @param params
+ * A pointer to structure of type struct rte_event_crypto_adapter_runtime_params
+ * with configuration parameter values. The reserved fields of this structure
+ * must be initialized to zero and the valid fields need to be set appropriately.
+ * This struct can be initialized using
+ * rte_event_crypto_adapter_runtime_params_init() API to default values or
+ * application may reset this struct and update required fields.
+ *
+ * @return
+ * - 0: Success
+ * - <0: Error code on failure
+ */
+__rte_experimental
+int
+rte_event_crypto_adapter_runtime_params_set(uint8_t id,
+ struct rte_event_crypto_adapter_runtime_params *params);
+
+/**
+ * Get the adapter runtime configuration parameters
+ *
+ * This API needs to be called after adding at least one qp to the adapter
+ * and is supported only for the service-based adapter.
+ *
+ * @param id
+ * Adapter identifier
+ *
+ * @param[out] params
+ * A pointer to structure of type struct rte_event_crypto_adapter_runtime_params
+ * containing valid adapter parameters when return value is 0.
+ *
+ * @return
+ * - 0: Success
+ * - <0: Error code on failure
+ */
+__rte_experimental
+int
+rte_event_crypto_adapter_runtime_params_get(uint8_t id,
+ struct rte_event_crypto_adapter_runtime_params *params);
+
/**
* @warning
* @b EXPERIMENTAL: this API may change without prior notice
diff --git a/lib/eventdev/version.map b/lib/eventdev/version.map
index 7b93736dff..3b17c84eae 100644
--- a/lib/eventdev/version.map
+++ b/lib/eventdev/version.map
@@ -121,6 +121,9 @@ EXPERIMENTAL {
rte_event_eth_tx_adapter_queue_stop;
# added in 23.03
+ rte_event_crypto_adapter_runtime_params_get;
+ rte_event_crypto_adapter_runtime_params_init;
+ rte_event_crypto_adapter_runtime_params_set;
rte_event_eth_rx_adapter_runtime_params_get;
rte_event_eth_rx_adapter_runtime_params_init;
rte_event_eth_rx_adapter_runtime_params_set;
--
2.25.1
next prev parent reply other threads:[~2023-02-10 13:47 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-07 16:18 [PATCH 1/3] eventdev/eth_rx: " Naga Harish K S V
2023-01-07 16:18 ` [PATCH 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-01-07 16:18 ` [PATCH 3/3] eventdev/crypto: " Naga Harish K S V
2023-01-18 10:22 ` [PATCH 1/3] eventdev/eth_rx: " Jerin Jacob
2023-01-20 8:58 ` Naga Harish K, S V
2023-01-20 9:32 ` Jerin Jacob
2023-01-20 10:33 ` Naga Harish K, S V
2023-01-23 9:31 ` Jerin Jacob
2023-01-23 18:07 ` Naga Harish K, S V
2023-01-23 18:04 ` [PATCH v2 " Naga Harish K S V
2023-01-23 18:04 ` [PATCH v2 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-01-23 18:04 ` [PATCH v2 3/3] eventdev/crypto: " Naga Harish K S V
2023-01-24 4:29 ` [PATCH v2 1/3] eventdev/eth_rx: " Jerin Jacob
2023-01-24 13:07 ` Naga Harish K, S V
2023-01-25 4:12 ` Jerin Jacob
2023-01-25 9:52 ` Naga Harish K, S V
2023-01-25 10:38 ` Jerin Jacob
2023-01-25 16:32 ` Naga Harish K, S V
2023-01-28 10:53 ` Jerin Jacob
2023-01-28 17:21 ` Stephen Hemminger
2023-01-30 9:56 ` Naga Harish K, S V
2023-01-30 14:43 ` Jerin Jacob
2023-02-02 16:12 ` Naga Harish K, S V
2023-02-03 9:44 ` Jerin Jacob
2023-02-06 6:21 ` Naga Harish K, S V
2023-02-06 16:38 ` Jerin Jacob
2023-02-09 17:00 ` Naga Harish K, S V
2023-02-09 16:57 ` [PATCH v3 " Naga Harish K S V
2023-02-09 16:57 ` [PATCH v3 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-09 16:57 ` [PATCH v3 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 1:55 ` [PATCH v3 1/3] eventdev/eth_rx: " Naga Harish K S V
2023-02-10 1:55 ` [PATCH v3 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 1:55 ` [PATCH v3 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 4:58 ` [PATCH v4 1/3] eventdev/eth_rx: " Naga Harish K S V
2023-02-10 4:58 ` [PATCH v4 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 4:58 ` [PATCH v4 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 6:30 ` [PATCH v4 1/3] eventdev/eth_rx: " Jerin Jacob
2023-02-10 13:33 ` [PATCH v5 " Naga Harish K S V
2023-02-10 13:33 ` [PATCH v5 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 13:33 ` [PATCH v5 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-10 13:58 ` [PATCH v5 1/3] eventdev/eth_rx: " Jerin Jacob
2023-02-10 17:42 ` Naga Harish K, S V
2023-02-10 13:46 ` Naga Harish K S V
2023-02-10 13:46 ` [PATCH v5 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 14:05 ` Jerin Jacob
2023-02-10 15:01 ` Naga Harish K, S V
2023-02-10 15:24 ` Jerin Jacob
2023-02-10 17:41 ` Naga Harish K, S V
2023-02-10 13:46 ` Naga Harish K S V [this message]
2023-02-10 17:37 ` [PATCH v6 1/3] eventdev/eth_rx: " Naga Harish K S V
2023-02-10 17:37 ` [PATCH v6 2/3] eventdev/eth_tx: " Naga Harish K S V
2023-02-10 17:37 ` [PATCH v6 3/3] eventdev/crypto: " Naga Harish K S V
2023-02-13 5:08 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230210134646.3407253-3-s.v.naga.harish.k@intel.com \
--to=s.v.naga.harish.k@intel.com \
--cc=abhinandan.gujjar@intel.com \
--cc=dev@dpdk.org \
--cc=erik.g.carrillo@intel.com \
--cc=jay.jayatheerthan@intel.com \
--cc=jerinj@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).