* [PATCH v1 0/1] doc: PMD update
@ 2023-02-24 18:20 Nicolas Chautru
2023-02-24 18:20 ` [PATCH v1 1/1] doc: update to Intel vRAN Boost PMD Nicolas Chautru
0 siblings, 1 reply; 4+ messages in thread
From: Nicolas Chautru @ 2023-02-24 18:20 UTC (permalink / raw)
To: dev, maxime.coquelin; +Cc: hernan.vargas, Nicolas Chautru
Hi Maxime,
Just one small change to documentation. I should not have used acronym
in a few places.
Thanks
Nic
Nicolas Chautru (1):
doc: update to Intel vRAN Boost PMD
doc/guides/bbdevs/vrb1.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--
2.34.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v1 1/1] doc: update to Intel vRAN Boost PMD
2023-02-24 18:20 [PATCH v1 0/1] doc: PMD update Nicolas Chautru
@ 2023-02-24 18:20 ` Nicolas Chautru
2023-02-27 9:04 ` Maxime Coquelin
0 siblings, 1 reply; 4+ messages in thread
From: Nicolas Chautru @ 2023-02-24 18:20 UTC (permalink / raw)
To: dev, maxime.coquelin; +Cc: hernan.vargas, Nicolas Chautru
Cosmetic change to refer explictly to the full name of the PMD
Intel vRAN Boost v1.
VRB1 acronym is only used as a prefix within the code.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
doc/guides/bbdevs/vrb1.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/doc/guides/bbdevs/vrb1.rst b/doc/guides/bbdevs/vrb1.rst
index f5a9dff804..9c48d30964 100644
--- a/doc/guides/bbdevs/vrb1.rst
+++ b/doc/guides/bbdevs/vrb1.rst
@@ -104,7 +104,7 @@ Initialization
--------------
When the device first powers up, its PCI Physical Functions (PF)
-can be listed through these commands for VRB1:
+can be listed through these commands for Intel vRAN Boost v1:
.. code-block:: console
@@ -123,7 +123,7 @@ Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
The igb_uio driver may be bound to the PF PCI device using one of two methods
-for VRB1:
+for Intel vRAN Boost v1:
#. PCI functions (physical or virtual, depending on the use case) can be bound
to the UIO driver by repeating this command for every function.
@@ -252,7 +252,7 @@ from the VF and not only limited to the PF as captured above.
See for more details: https://github.com/intel/pf-bb-config
-Specifically for the bbdev VRB1 PMD, the command below can be used
+Specifically for the bbdev Intel vRAN Boost v1 PMD, the command below can be used
(note that ACC200 was used previously to refer to VRB1):
.. code-block:: console
--
2.34.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1 1/1] doc: update to Intel vRAN Boost PMD
2023-02-24 18:20 ` [PATCH v1 1/1] doc: update to Intel vRAN Boost PMD Nicolas Chautru
@ 2023-02-27 9:04 ` Maxime Coquelin
2023-03-06 13:21 ` Maxime Coquelin
0 siblings, 1 reply; 4+ messages in thread
From: Maxime Coquelin @ 2023-02-27 9:04 UTC (permalink / raw)
To: Nicolas Chautru, dev; +Cc: hernan.vargas
On 2/24/23 19:20, Nicolas Chautru wrote:
> Cosmetic change to refer explictly to the full name of the PMD
> Intel vRAN Boost v1.
> VRB1 acronym is only used as a prefix within the code.
>
> Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
> ---
> doc/guides/bbdevs/vrb1.rst | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/doc/guides/bbdevs/vrb1.rst b/doc/guides/bbdevs/vrb1.rst
> index f5a9dff804..9c48d30964 100644
> --- a/doc/guides/bbdevs/vrb1.rst
> +++ b/doc/guides/bbdevs/vrb1.rst
> @@ -104,7 +104,7 @@ Initialization
> --------------
>
> When the device first powers up, its PCI Physical Functions (PF)
> -can be listed through these commands for VRB1:
> +can be listed through these commands for Intel vRAN Boost v1:
>
> .. code-block:: console
>
> @@ -123,7 +123,7 @@ Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
> ``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
>
> The igb_uio driver may be bound to the PF PCI device using one of two methods
> -for VRB1:
> +for Intel vRAN Boost v1:
>
> #. PCI functions (physical or virtual, depending on the use case) can be bound
> to the UIO driver by repeating this command for every function.
> @@ -252,7 +252,7 @@ from the VF and not only limited to the PF as captured above.
>
> See for more details: https://github.com/intel/pf-bb-config
>
> -Specifically for the bbdev VRB1 PMD, the command below can be used
> +Specifically for the bbdev Intel vRAN Boost v1 PMD, the command below can be used
> (note that ACC200 was used previously to refer to VRB1):
>
> .. code-block:: console
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Thanks,
Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1 1/1] doc: update to Intel vRAN Boost PMD
2023-02-27 9:04 ` Maxime Coquelin
@ 2023-03-06 13:21 ` Maxime Coquelin
0 siblings, 0 replies; 4+ messages in thread
From: Maxime Coquelin @ 2023-03-06 13:21 UTC (permalink / raw)
To: Nicolas Chautru, dev; +Cc: hernan.vargas
On 2/27/23 10:04, Maxime Coquelin wrote:
>
>
> On 2/24/23 19:20, Nicolas Chautru wrote:
>> Cosmetic change to refer explictly to the full name of the PMD
Fixed explictly -> explicitly
>> Intel vRAN Boost v1.
>> VRB1 acronym is only used as a prefix within the code.
>>
>> Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
>> ---
>> doc/guides/bbdevs/vrb1.rst | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/doc/guides/bbdevs/vrb1.rst b/doc/guides/bbdevs/vrb1.rst
>> index f5a9dff804..9c48d30964 100644
>> --- a/doc/guides/bbdevs/vrb1.rst
>> +++ b/doc/guides/bbdevs/vrb1.rst
>> @@ -104,7 +104,7 @@ Initialization
>> --------------
>> When the device first powers up, its PCI Physical Functions (PF)
>> -can be listed through these commands for VRB1:
>> +can be listed through these commands for Intel vRAN Boost v1:
>> .. code-block:: console
>> @@ -123,7 +123,7 @@ Install the DPDK igb_uio driver, bind it with the
>> PF PCI device ID and use
>> ``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK
>> UIO driver.
>> The igb_uio driver may be bound to the PF PCI device using one of
>> two methods
>> -for VRB1:
>> +for Intel vRAN Boost v1:
>> #. PCI functions (physical or virtual, depending on the use case)
>> can be bound
>> to the UIO driver by repeating this command for every function.
>> @@ -252,7 +252,7 @@ from the VF and not only limited to the PF as
>> captured above.
>> See for more details: https://github.com/intel/pf-bb-config
>> -Specifically for the bbdev VRB1 PMD, the command below can be used
>> +Specifically for the bbdev Intel vRAN Boost v1 PMD, the command below
>> can be used
>> (note that ACC200 was used previously to refer to VRB1):
>> .. code-block:: console
>
> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
>
> Thanks,
> Maxime
Applied to dpdk-next-baseband/for-main.
Thanks,
Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-03-06 13:21 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-24 18:20 [PATCH v1 0/1] doc: PMD update Nicolas Chautru
2023-02-24 18:20 ` [PATCH v1 1/1] doc: update to Intel vRAN Boost PMD Nicolas Chautru
2023-02-27 9:04 ` Maxime Coquelin
2023-03-06 13:21 ` Maxime Coquelin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).