From: Thomas Monjalon <thomas@monjalon.net>
To: dev@dpdk.org
Cc: mraz@nvidia.com, galco@nvidia.com, asafp@nvidia.com,
rasland@nvidia.com, Matan Azrad <matan@nvidia.com>,
Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Subject: [PATCH] doc: fix naming of NVIDIA devices
Date: Tue, 7 Mar 2023 16:28:25 +0100 [thread overview]
Message-ID: <20230307152825.263841-1-thomas@monjalon.net> (raw)
The networking NVIDIA devices may be named as the following,
using 0 and Ax as fake suffixes:
- ConnectX-0
- ConnectX-0 Ax
- BlueField-0
Casing and missing hyphens are fixed to avoid future wrong copy/paste.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
doc/guides/nics/mlx5.rst | 8 ++++----
doc/guides/platform/bluefield.rst | 2 +-
doc/guides/rel_notes/release_20_08.rst | 2 +-
doc/guides/rel_notes/release_20_11.rst | 2 +-
doc/guides/rel_notes/release_21_02.rst | 4 ++--
doc/guides/rel_notes/release_21_05.rst | 2 +-
doc/guides/rel_notes/release_21_08.rst | 2 +-
doc/guides/rel_notes/release_21_11.rst | 4 ++--
doc/guides/rel_notes/release_22_03.rst | 2 +-
doc/guides/rel_notes/release_22_07.rst | 4 ++--
drivers/net/mlx5/mlx5_mac.c | 2 +-
11 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 6510e74fb9..b4714c0803 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -150,7 +150,7 @@ Limitations
- Host shaper:
- - Support BlueField series NIC from BlueField 2.
+ - Support BlueField series NIC from BlueField-2.
- When configuring host shaper with MLX5_HOST_SHAPER_FLAG_AVAIL_THRESH_TRIGGERED flag set,
only rates 0 and 100Mbps are supported.
@@ -398,9 +398,9 @@ Limitations
- E-Switch Manager matching:
- - For Bluefield with old FW
+ - For BlueField with old FW
which doesn't expose the E-Switch Manager vport ID in the capability,
- matching E-Switch Manager should be used only in Bluefield embedded CPU mode.
+ matching E-Switch Manager should be used only in BlueField embedded CPU mode.
- Raw encapsulation:
@@ -1916,7 +1916,7 @@ Then the PMD call the callback registered previously,
which will delay a while to let Rx queue empty,
then disable host shaper.
-Let's assume we have a simple BlueField 2 setup:
+Let's assume we have a simple BlueField-2 setup:
port 0 is uplink, port 1 is VF representor.
Each port has 2 Rx queues.
To control traffic from the host to the Arm device,
diff --git a/doc/guides/platform/bluefield.rst b/doc/guides/platform/bluefield.rst
index 09486747b1..98df515241 100644
--- a/doc/guides/platform/bluefield.rst
+++ b/doc/guides/platform/bluefield.rst
@@ -18,7 +18,7 @@ and common offload HW drivers of **NVIDIA BlueField** family SoC.
Supported BlueField Platforms
-----------------------------
-- `BlueField 2 <https://docs.nvidia.com/networking/display/BlueField2DPUENUG/Introduction>`_
+- `BlueField-2 <https://docs.nvidia.com/networking/display/BlueField2DPUENUG/Introduction>`_
Common Offload HW Drivers
diff --git a/doc/guides/rel_notes/release_20_08.rst b/doc/guides/rel_notes/release_20_08.rst
index 445e40fbac..619c3dd59f 100644
--- a/doc/guides/rel_notes/release_20_08.rst
+++ b/doc/guides/rel_notes/release_20_08.rst
@@ -466,7 +466,7 @@ Tested Platforms
* Mellanox\ |reg| BlueField\ |reg| SmartNIC
- * Mellanox\ |reg| BlueField\ |reg| 2 SmartNIC MT41686 - MBF2H332A-AEEOT (2x25G)
+ * Mellanox\ |reg| BlueField\ |reg|-2 SmartNIC MT41686 - MBF2H332A-AEEOT (2x25G)
* Host interface: PCI Express 3.0 x16
* Device ID: 15b3:a2d2
diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
index 7fd15398e4..76fd7372b8 100644
--- a/doc/guides/rel_notes/release_20_11.rst
+++ b/doc/guides/rel_notes/release_20_11.rst
@@ -880,7 +880,7 @@ Tested Platforms
* Mellanox\ |reg| BlueField\ |reg| SmartNIC
- * Mellanox\ |reg| BlueField\ |reg| 2 SmartNIC MT41686 - MBF2H332A-AEEOT (2x25G)
+ * Mellanox\ |reg| BlueField\ |reg|-2 SmartNIC MT41686 - MBF2H332A-AEEOT (2x25G)
* Host interface: PCI Express 3.0 x16
* Device ID: 15b3:a2d2
diff --git a/doc/guides/rel_notes/release_21_02.rst b/doc/guides/rel_notes/release_21_02.rst
index 5fbf5b3d43..b47593b214 100644
--- a/doc/guides/rel_notes/release_21_02.rst
+++ b/doc/guides/rel_notes/release_21_02.rst
@@ -135,7 +135,7 @@ New Features
* **Added mlx5 compress PMD.**
- Added a new compress PMD for Bluefield 2 adapters.
+ Added a new compress PMD for BlueField-2 adapters.
See the :doc:`../compressdevs/mlx5` for more details.
@@ -443,7 +443,7 @@ Tested Platforms
* Mellanox\ |reg| BlueField\ |reg| SmartNIC
- * Mellanox\ |reg| BlueField\ |reg| 2 SmartNIC MT41686 - MBF2H332A-AEEOT (2x25G)
+ * Mellanox\ |reg| BlueField\ |reg|-2 SmartNIC MT41686 - MBF2H332A-AEEOT (2x25G)
* Host interface: PCI Express 3.0 x16
* Device ID: 15b3:a2d2
diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst
index 49044ed422..4dc0573266 100644
--- a/doc/guides/rel_notes/release_21_05.rst
+++ b/doc/guides/rel_notes/release_21_05.rst
@@ -566,7 +566,7 @@ Tested Platforms
* Mellanox\ |reg| BlueField\ |reg| SmartNIC
- * Mellanox\ |reg| BlueField\ |reg| 2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
+ * Mellanox\ |reg| BlueField\ |reg|-2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
* Host interface: PCI Express 3.0 x16
* Device ID: 15b3:a2d2
diff --git a/doc/guides/rel_notes/release_21_08.rst b/doc/guides/rel_notes/release_21_08.rst
index ac1c081903..369452b40b 100644
--- a/doc/guides/rel_notes/release_21_08.rst
+++ b/doc/guides/rel_notes/release_21_08.rst
@@ -392,7 +392,7 @@ Tested Platforms
* Mellanox\ |reg| BlueField\ |reg| SmartNIC
- * Mellanox\ |reg| BlueField\ |reg| 2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
+ * Mellanox\ |reg| BlueField\ |reg|-2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
* Host interface: PCI Express 3.0 x16
* Device ID: 15b3:a2d6
diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
index db09ec01ea..b9df58734b 100644
--- a/doc/guides/rel_notes/release_21_11.rst
+++ b/doc/guides/rel_notes/release_21_11.rst
@@ -272,7 +272,7 @@ New Features
* **Updated Mellanox mlx5 crypto driver.**
* Added Windows support.
- * Added support for BlueField 2 and ConnectX-6 Dx.
+ * Added support for BlueField-2 and ConnectX-6 Dx.
* **Updated NXP dpaa_sec crypto PMD.**
@@ -828,7 +828,7 @@ Tested Platforms
* Mellanox\ |reg| BlueField\ |reg| SmartNIC
- * Mellanox\ |reg| BlueField\ |reg| 2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
+ * Mellanox\ |reg| BlueField\ |reg|-2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
* Host interface: PCI Express 3.0 x16
* Device ID: 15b3:a2d6
diff --git a/doc/guides/rel_notes/release_22_03.rst b/doc/guides/rel_notes/release_22_03.rst
index 0923707cb8..3c25561f27 100644
--- a/doc/guides/rel_notes/release_22_03.rst
+++ b/doc/guides/rel_notes/release_22_03.rst
@@ -447,7 +447,7 @@ Tested Platforms
* Mellanox\ |reg| BlueField\ |reg| SmartNIC
- * Mellanox\ |reg| BlueField\ |reg| 2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
+ * Mellanox\ |reg| BlueField\ |reg|-2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
* Host interface: PCI Express 3.0 x16
* Device ID: 15b3:a2d6
diff --git a/doc/guides/rel_notes/release_22_07.rst b/doc/guides/rel_notes/release_22_07.rst
index b710ac622c..7312a29789 100644
--- a/doc/guides/rel_notes/release_22_07.rst
+++ b/doc/guides/rel_notes/release_22_07.rst
@@ -451,7 +451,7 @@ Tested Platforms
* Device ID: 15b3:101f
* Firmware version: 26.33.1048 and above
- * NVIDIA\ |reg| ConnectX\ |reg| 7 200G CX713106AE-HEA_QP1_Ax (2x200G)
+ * NVIDIA\ |reg| ConnectX\ |reg|-7 200G CX713106AE-HEA_QP1_Ax (2x200G)
* Host interface: PCI Express 5.0 x16
* Device ID: 15b3:1021
@@ -459,7 +459,7 @@ Tested Platforms
* NVIDIA \ |reg| BlueField\ |reg| SmartNIC
- * NVIDIA\ |reg| BlueField\ |reg| 2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
+ * NVIDIA\ |reg| BlueField\ |reg|-2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
* Host interface: PCI Express 3.0 x16
* Device ID: 15b3:a2d6
diff --git a/drivers/net/mlx5/mlx5_mac.c b/drivers/net/mlx5/mlx5_mac.c
index a791fedc91..b9d1e33ac3 100644
--- a/drivers/net/mlx5/mlx5_mac.c
+++ b/drivers/net/mlx5/mlx5_mac.c
@@ -157,7 +157,7 @@ mlx5_mac_addr_set(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr)
/*
* Configuring the VF instead of its representor,
- * need to skip the special case of HPF on Bluefield.
+ * need to skip the special case of HPF on BlueField.
*/
if (priv->representor && !mlx5_is_hpf(dev) && !mlx5_is_sf_repr(dev)) {
DRV_LOG(DEBUG, "VF represented by port %u setting primary MAC address",
--
2.39.1
next reply other threads:[~2023-03-07 15:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-07 15:28 Thomas Monjalon [this message]
2023-03-19 13:31 ` Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230307152825.263841-1-thomas@monjalon.net \
--to=thomas@monjalon.net \
--cc=asafp@nvidia.com \
--cc=dev@dpdk.org \
--cc=galco@nvidia.com \
--cc=matan@nvidia.com \
--cc=mraz@nvidia.com \
--cc=rasland@nvidia.com \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).