From: Radu Nicolau <radu.nicolau@intel.com>
To: Jingjing Wu <jingjing.wu@intel.com>, Beilei Xing <beilei.xing@intel.com>
Cc: dev@dpdk.org, Radu Nicolau <radu.nicolau@intel.com>
Subject: [PATCH 2/2] net/iavf: use static capabilities to set IV size
Date: Mon, 13 Mar 2023 12:29:47 +0000 [thread overview]
Message-ID: <20230313122948.53779-1-radu.nicolau@intel.com> (raw)
If iavf_crypto_capabilities contains the required capability then
use the IV size defined there, otherwise use relaxed IV size constrains
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
---
drivers/net/iavf/iavf_ipsec_crypto.c | 54 ++++++++++++++++++++++------
1 file changed, 43 insertions(+), 11 deletions(-)
diff --git a/drivers/net/iavf/iavf_ipsec_crypto.c b/drivers/net/iavf/iavf_ipsec_crypto.c
index 082948b61f..408b410f15 100644
--- a/drivers/net/iavf/iavf_ipsec_crypto.c
+++ b/drivers/net/iavf/iavf_ipsec_crypto.c
@@ -98,13 +98,13 @@ iavf_ipsec_crypto_session_size_get(void *device __rte_unused)
}
static const struct rte_cryptodev_symmetric_capability *
-get_capability(struct iavf_security_ctx *iavf_sctx,
+get_capability(struct iavf_security_ctx *iavf_sctx __rte_unused,
uint32_t algo, uint32_t type)
{
const struct rte_cryptodev_capabilities *capability;
int i = 0;
- capability = &iavf_sctx->crypto_capabilities[i];
+ capability = &iavf_crypto_capabilities[i];
while (capability->op != RTE_CRYPTO_OP_TYPE_UNDEFINED) {
if (capability->op == RTE_CRYPTO_OP_TYPE_SYMMETRIC &&
@@ -1229,7 +1229,8 @@ enum rte_crypto_auth_algorithm auth_maptbl[] = {
static void
update_auth_capabilities(struct rte_cryptodev_capabilities *scap,
- struct virtchnl_algo_cap *acap)
+ struct virtchnl_algo_cap *acap,
+ const struct rte_cryptodev_symmetric_capability *symcap)
{
struct rte_cryptodev_symmetric_capability *capability = &scap->sym;
@@ -1247,6 +1248,17 @@ update_auth_capabilities(struct rte_cryptodev_capabilities *scap,
capability->auth.digest_size.min = acap->min_digest_size;
capability->auth.digest_size.max = acap->max_digest_size;
capability->auth.digest_size.increment = acap->inc_digest_size;
+
+ if (symcap) {
+ capability->auth.iv_size.min = symcap->auth.iv_size.min;
+ capability->auth.iv_size.max = symcap->auth.iv_size.max;
+ capability->auth.iv_size.increment =
+ symcap->auth.iv_size.increment;
+ } else {
+ capability->auth.iv_size.min = 0;
+ capability->auth.iv_size.max = 65535;
+ capability->auth.iv_size.increment = 1;
+ }
}
enum rte_crypto_cipher_algorithm cipher_maptbl[] = {
@@ -1259,7 +1271,8 @@ enum rte_crypto_cipher_algorithm cipher_maptbl[] = {
static void
update_cipher_capabilities(struct rte_cryptodev_capabilities *scap,
- struct virtchnl_algo_cap *acap)
+ struct virtchnl_algo_cap *acap,
+ const struct rte_cryptodev_symmetric_capability *symcap)
{
struct rte_cryptodev_symmetric_capability *capability = &scap->sym;
@@ -1275,9 +1288,17 @@ update_cipher_capabilities(struct rte_cryptodev_capabilities *scap,
capability->cipher.key_size.max = acap->max_key_size;
capability->cipher.key_size.increment = acap->inc_key_size;
- capability->cipher.iv_size.min = acap->min_iv_size;
- capability->cipher.iv_size.max = acap->max_iv_size;
- capability->cipher.iv_size.increment = acap->inc_iv_size;
+ if (symcap) {
+ capability->cipher.iv_size.min = symcap->cipher.iv_size.min;
+ capability->cipher.iv_size.max = symcap->cipher.iv_size.max;
+ capability->cipher.iv_size.increment =
+ symcap->cipher.iv_size.increment;
+
+ } else {
+ capability->cipher.iv_size.min = 0;
+ capability->cipher.iv_size.max = 65535;
+ capability->cipher.iv_size.increment = 1;
+ }
}
enum rte_crypto_aead_algorithm aead_maptbl[] = {
@@ -1289,7 +1310,8 @@ enum rte_crypto_aead_algorithm aead_maptbl[] = {
static void
update_aead_capabilities(struct rte_cryptodev_capabilities *scap,
- struct virtchnl_algo_cap *acap)
+ struct virtchnl_algo_cap *acap,
+ const struct rte_cryptodev_symmetric_capability *symcap __rte_unused)
{
struct rte_cryptodev_symmetric_capability *capability = &scap->sym;
@@ -1328,6 +1350,7 @@ iavf_ipsec_crypto_set_security_capabililites(struct iavf_security_ctx
*iavf_sctx, struct virtchnl_ipsec_cap *vch_cap)
{
struct rte_cryptodev_capabilities *capabilities;
+ const struct rte_cryptodev_symmetric_capability *symcap;
int i, j, number_of_capabilities = 0, ci = 0;
/* Count the total number of crypto algorithms supported */
@@ -1354,16 +1377,25 @@ iavf_ipsec_crypto_set_security_capabililites(struct iavf_security_ctx
for (j = 0; j < vch_cap->cap[i].algo_cap_num; j++, ci++) {
switch (vch_cap->cap[i].crypto_type) {
case VIRTCHNL_AUTH:
+ symcap = get_auth_capability(iavf_sctx,
+ capabilities[ci].sym.auth.algo);
update_auth_capabilities(&capabilities[ci],
- &vch_cap->cap[i].algo_cap_list[j]);
+ &vch_cap->cap[i].algo_cap_list[j],
+ symcap);
break;
case VIRTCHNL_CIPHER:
+ symcap = get_cipher_capability(iavf_sctx,
+ capabilities[ci].sym.cipher.algo);
update_cipher_capabilities(&capabilities[ci],
- &vch_cap->cap[i].algo_cap_list[j]);
+ &vch_cap->cap[i].algo_cap_list[j],
+ symcap);
break;
case VIRTCHNL_AEAD:
+ symcap = get_aead_capability(iavf_sctx,
+ capabilities[ci].sym.aead.algo);
update_aead_capabilities(&capabilities[ci],
- &vch_cap->cap[i].algo_cap_list[j]);
+ &vch_cap->cap[i].algo_cap_list[j],
+ symcap);
break;
default:
capabilities[ci].op =
--
2.25.1
next reply other threads:[~2023-03-13 12:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-13 12:29 Radu Nicolau [this message]
2023-03-16 10:53 ` Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230313122948.53779-1-radu.nicolau@intel.com \
--to=radu.nicolau@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).