[PATCH 3/7] net/hns3: fix missing FEC capability

[Dongdong Liu <liudongdong3@huawei.com>]

From: Jie Hai <haijie1@huawei.com>

Currently, FEC capabilities are reported based on the device ID.
And a device ID is bound to only one or two rates. So some cases
hns3 driver only reports the FEC capabilities corresponding to
the rate. But hns3 supports speed switching function, which causes
the FEC capabilities of other rates are not reported. So this patch
reports the FEC capabilities by the speed capabilities of the
network port.

Fixes: 9bf2ea8dbc65 ("net/hns3: support FEC")
Cc: stable@dpdk.org

Signed-off-by: Jie Hai <haijie1@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
---
 drivers/net/hns3/hns3_ethdev.c | 129 ++++++++++++---------------------
 1 file changed, 45 insertions(+), 84 deletions(-)

diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 9968518b2d..80cdcc83bf 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -60,6 +60,13 @@ enum hns3_evt_cause {
 	HNS3_VECTOR0_EVENT_OTHER,
 };
 
+#define HNS3_SPEEDS_SUPP_FEC (RTE_ETH_LINK_SPEED_10G | \
+			      RTE_ETH_LINK_SPEED_25G | \
+			      RTE_ETH_LINK_SPEED_40G | \
+			      RTE_ETH_LINK_SPEED_50G | \
+			      RTE_ETH_LINK_SPEED_100G | \
+			      RTE_ETH_LINK_SPEED_200G)
+
 static const struct rte_eth_fec_capa speed_fec_capa_tbl[] = {
 	{ RTE_ETH_SPEED_NUM_10G, RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC) |
 			     RTE_ETH_FEC_MODE_CAPA_MASK(AUTO) |
@@ -5927,56 +5934,27 @@ hns3_reset_service(void *param)
 		hns3_msix_process(hns, reset_level);
 }
 
-static unsigned int
-hns3_get_speed_capa_num(uint16_t device_id)
+static uint32_t
+hns3_get_speed_fec_capa(struct rte_eth_fec_capa *speed_fec_capa,
+			uint32_t speed_capa)
 {
-	unsigned int num;
-
-	switch (device_id) {
-	case HNS3_DEV_ID_25GE:
-	case HNS3_DEV_ID_25GE_RDMA:
-		num = 2;
-		break;
-	case HNS3_DEV_ID_100G_RDMA_MACSEC:
-	case HNS3_DEV_ID_200G_RDMA:
-		num = 1;
-		break;
-	default:
-		num = 0;
-		break;
-	}
+	uint32_t speed_bit;
+	uint32_t num = 0;
+	uint32_t i;
 
-	return num;
-}
+	for (i = 0; i < RTE_DIM(speed_fec_capa_tbl); i++) {
+		speed_bit =
+			rte_eth_speed_bitflag(speed_fec_capa_tbl[i].speed,
+					      RTE_ETH_LINK_FULL_DUPLEX);
+		if ((speed_capa & speed_bit) == 0)
+			continue;
 
-static int
-hns3_get_speed_fec_capa(struct rte_eth_fec_capa *speed_fec_capa,
-			uint16_t device_id)
-{
-	switch (device_id) {
-	case HNS3_DEV_ID_25GE:
-	/* fallthrough */
-	case HNS3_DEV_ID_25GE_RDMA:
-		speed_fec_capa[0].speed = speed_fec_capa_tbl[1].speed;
-		speed_fec_capa[0].capa = speed_fec_capa_tbl[1].capa;
-
-		/* In HNS3 device, the 25G NIC is compatible with 10G rate */
-		speed_fec_capa[1].speed = speed_fec_capa_tbl[0].speed;
-		speed_fec_capa[1].capa = speed_fec_capa_tbl[0].capa;
-		break;
-	case HNS3_DEV_ID_100G_RDMA_MACSEC:
-		speed_fec_capa[0].speed = speed_fec_capa_tbl[4].speed;
-		speed_fec_capa[0].capa = speed_fec_capa_tbl[4].capa;
-		break;
-	case HNS3_DEV_ID_200G_RDMA:
-		speed_fec_capa[0].speed = speed_fec_capa_tbl[5].speed;
-		speed_fec_capa[0].capa = speed_fec_capa_tbl[5].capa;
-		break;
-	default:
-		return -ENOTSUP;
+		speed_fec_capa[num].speed = speed_fec_capa_tbl[i].speed;
+		speed_fec_capa[num].capa = speed_fec_capa_tbl[i].capa;
+		num++;
 	}
 
-	return 0;
+	return num;
 }
 
 static int
@@ -5985,28 +5963,28 @@ hns3_fec_get_capability(struct rte_eth_dev *dev,
 			unsigned int num)
 {
 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
-	uint16_t device_id = pci_dev->id.device_id;
-	unsigned int capa_num;
-	int ret;
+	unsigned int speed_num;
+	uint32_t speed_capa;
 
-	capa_num = hns3_get_speed_capa_num(device_id);
-	if (capa_num == 0) {
-		hns3_err(hw, "device(0x%x) is not supported by hns3 PMD",
-			 device_id);
+	speed_capa = hns3_get_speed_capa(hw);
+	/* speed_num counts number of speed capabilities */
+	speed_num = __builtin_popcount(speed_capa & HNS3_SPEEDS_SUPP_FEC);
+	if (speed_num == 0)
 		return -ENOTSUP;
-	}
 
-	if (speed_fec_capa == NULL || num < capa_num)
-		return capa_num;
+	if (speed_fec_capa == NULL)
+		return speed_num;
 
-	ret = hns3_get_speed_fec_capa(speed_fec_capa, device_id);
-	if (ret)
-		return -ENOTSUP;
+	if (num < speed_num) {
+		hns3_err(hw, "not enough array size(%u) to store FEC capabilities, should not be less than %u",
+			 num, speed_num);
+		return -EINVAL;
+	}
 
-	return capa_num;
+	return hns3_get_speed_fec_capa(speed_fec_capa, speed_capa);
 }
 
+
 static int
 get_current_fec_auto_state(struct hns3_hw *hw, uint8_t *state)
 {
@@ -6144,52 +6122,35 @@ hns3_set_fec_hw(struct hns3_hw *hw, uint32_t mode)
 }
 
 static uint32_t
-get_current_speed_fec_cap(struct hns3_hw *hw, struct rte_eth_fec_capa *fec_capa)
+hns3_get_current_speed_fec_cap(struct hns3_mac *mac)
 {
-	struct hns3_mac *mac = &hw->mac;
-	uint32_t cur_capa;
+	uint32_t i;
 
-	switch (mac->link_speed) {
-	case RTE_ETH_SPEED_NUM_10G:
-		cur_capa = fec_capa[1].capa;
-		break;
-	case RTE_ETH_SPEED_NUM_25G:
-	case RTE_ETH_SPEED_NUM_100G:
-	case RTE_ETH_SPEED_NUM_200G:
-		cur_capa = fec_capa[0].capa;
-		break;
-	default:
-		cur_capa = 0;
-		break;
+	for (i = 0; i < RTE_DIM(speed_fec_capa_tbl); i++) {
+		if (mac->link_speed == speed_fec_capa_tbl[i].speed)
+			return speed_fec_capa_tbl[i].capa;
 	}
 
-	return cur_capa;
+	return 0;
 }
 
 static int
 hns3_fec_mode_valid(struct rte_eth_dev *dev, uint32_t mode)
 {
-#define FEC_CAPA_NUM 2
 	struct hns3_adapter *hns = dev->data->dev_private;
 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(hns);
-	struct rte_eth_fec_capa fec_capa[FEC_CAPA_NUM];
-	uint32_t num = FEC_CAPA_NUM;
 	uint32_t cur_capa;
-	int ret;
 
 	if (__builtin_popcount(mode) != 1) {
 		hns3_err(hw, "FEC mode(0x%x) should be only one bit set", mode);
 		return -EINVAL;
 	}
 
-	ret = hns3_fec_get_capability(dev, fec_capa, num);
-	if (ret < 0)
-		return ret;
 	/*
 	 * Check whether the configured mode is within the FEC capability.
 	 * If not, the configured mode will not be supported.
 	 */
-	cur_capa = get_current_speed_fec_cap(hw, fec_capa);
+	cur_capa = hns3_get_current_speed_fec_cap(&hw->mac);
 	if ((cur_capa & mode) == 0) {
 		hns3_err(hw, "unsupported FEC mode(0x%x)", mode);
 		return -EINVAL;
-- 
2.22.0