* [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters
@ 2023-05-11 8:25 Feifei Wang
2023-05-11 8:51 ` Jerin Jacob
2023-05-11 15:44 ` Stephen Hemminger
0 siblings, 2 replies; 9+ messages in thread
From: Feifei Wang @ 2023-05-11 8:25 UTC (permalink / raw)
To: feifei.wang2; +Cc: dev, nd, Lijian Zhang, Ruifeng Wang, Honnappa Nagarahalli
This patch is to collect empty poll of 'rte_eth_rx_burst' functions in
dpdk l3fwd application. Empty poll means Rx burst function receives no
pkts in one loop.
Furthermore, we also add 'nic_xstats_display' API to show NIC counters.
Usage:
With this patch, no special settings, just run l3fwd, and when you
stoping l3fwd, thread will print the info above.
Note:
This patch has just a slight impact on performance and can be ignored.
dpdk version:23.03
Suggested-by: Lijian Zhang <lijian.zhang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
---
examples/l3fwd/l3fwd.h | 68 ++++++++++++++++++++++++++++++++++++++
examples/l3fwd/l3fwd_lpm.c | 26 +++++++++++++--
examples/l3fwd/main.c | 22 ++++++++++++
3 files changed, 114 insertions(+), 2 deletions(-)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index b55855c932..2b3fca62f3 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -56,6 +56,17 @@
#define L3FWD_HASH_ENTRIES (1024*1024*1)
#endif
+struct lcore_stats {
+ uint32_t nb_rx_pkts[16];
+ uint32_t num_loop[16];
+ uint32_t none_loop[16];
+ uint32_t no_full_loop[16];
+ float none_loop_per[16];
+ float no_full_loop_per[16];
+} __rte_cache_aligned;
+
+extern struct lcore_stats stats[RTE_MAX_LCORE];
+
struct parm_cfg {
const char *rule_ipv4_name;
const char *rule_ipv6_name;
@@ -115,6 +126,63 @@ extern struct acl_algorithms acl_alg[];
extern uint32_t max_pkt_len;
+static inline void
+nic_xstats_display(uint32_t port_id)
+{
+ struct rte_eth_xstat *xstats;
+ int cnt_xstats, idx_xstat;
+ struct rte_eth_xstat_name *xstats_names;
+
+ printf("###### NIC extended statistics for port %-2d\n", port_id);
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ fprintf(stderr, "Error: Invalid port number %i\n", port_id);
+ return;
+ }
+
+ /* Get count */
+ cnt_xstats = rte_eth_xstats_get_names(port_id, NULL, 0);
+ if (cnt_xstats < 0) {
+ fprintf(stderr, "Error: Cannot get count of xstats\n");
+ return;
+ }
+
+ /* Get id-name lookup table */
+ xstats_names = malloc(sizeof(struct rte_eth_xstat_name) * cnt_xstats);
+ if (xstats_names == NULL) {
+ fprintf(stderr, "Cannot allocate memory for xstats lookup\n");
+ return;
+ }
+ if (cnt_xstats != rte_eth_xstats_get_names(
+ port_id, xstats_names, cnt_xstats)) {
+ fprintf(stderr, "Error: Cannot get xstats lookup\n");
+ free(xstats_names);
+ return;
+ }
+
+ /* Get stats themselves */
+ xstats = malloc(sizeof(struct rte_eth_xstat) * cnt_xstats);
+ if (xstats == NULL) {
+ fprintf(stderr, "Cannot allocate memory for xstats\n");
+ free(xstats_names);
+ return;
+ }
+ if (cnt_xstats != rte_eth_xstats_get(port_id, xstats, cnt_xstats)) {
+ fprintf(stderr, "Error: Unable to get xstats\n");
+ free(xstats_names);
+ free(xstats);
+ return;
+ }
+
+ /* Display xstats */
+ for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++) {
+ printf("%s: %"PRIu64"\n",
+ xstats_names[idx_xstat].name,
+ xstats[idx_xstat].value);
+ }
+ free(xstats_names);
+ free(xstats);
+}
+
/* Send burst of packets on an output interface */
static inline int
send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
index 4ac1925c84..9e27e954b9 100644
--- a/examples/l3fwd/l3fwd_lpm.c
+++ b/examples/l3fwd/l3fwd_lpm.c
@@ -41,6 +41,8 @@
static struct rte_lpm *ipv4_l3fwd_lpm_lookup_struct[NB_SOCKETS];
static struct rte_lpm6 *ipv6_l3fwd_lpm_lookup_struct[NB_SOCKETS];
+extern struct lcore_stats stats[RTE_MAX_LCORE];
+
/* Performing LPM-based lookups. 8< */
static inline uint16_t
lpm_get_ipv4_dst_port(const struct rte_ipv4_hdr *ipv4_hdr,
@@ -153,6 +155,7 @@ lpm_main_loop(__rte_unused void *dummy)
struct lcore_conf *qconf;
const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
US_PER_S * BURST_TX_DRAIN_US;
+ bool start_count = 0;
lcore_id = rte_lcore_id();
qconf = &lcore_conf[lcore_id];
@@ -207,8 +210,22 @@ lpm_main_loop(__rte_unused void *dummy)
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
MAX_PKT_BURST);
- if (nb_rx == 0)
- continue;
+ if (start_count == 0) {
+ if (nb_rx != 0)
+ start_count = 1;
+ }
+
+ if (start_count == 1) {
+ stats[lcore_id].nb_rx_pkts[i] += nb_rx;
+ stats[lcore_id].num_loop[i]++;
+ if (nb_rx < MAX_PKT_BURST && nb_rx > 0)
+ stats[lcore_id].no_full_loop[i]++;
+
+ if (nb_rx == 0) {
+ stats[lcore_id].none_loop[i]++;
+ continue;
+ }
+ }
#if defined RTE_ARCH_X86 || defined __ARM_NEON \
|| defined RTE_ARCH_PPC_64
@@ -223,6 +240,11 @@ lpm_main_loop(__rte_unused void *dummy)
cur_tsc = rte_rdtsc();
}
+ for (i = 0; i < n_rx_q; ++i) {
+ stats[lcore_id].none_loop_per[i] = (float)stats[lcore_id].none_loop[i]/stats[lcore_id].num_loop[i]*100;
+ stats[lcore_id].no_full_loop_per[i] = (float)stats[lcore_id].no_full_loop[i]/stats[lcore_id].num_loop[i]*100;
+ }
+
return 0;
}
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index a4f061537e..4727215eae 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -53,6 +53,8 @@
#define MAX_LCORE_PARAMS 1024
+struct lcore_stats stats[RTE_MAX_LCORE];
+
uint16_t nb_rxd = RX_DESC_DEFAULT;
uint16_t nb_txd = TX_DESC_DEFAULT;
@@ -1592,6 +1594,26 @@ main(int argc, char **argv)
} else {
rte_eal_mp_wait_lcore();
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+ qconf = &lcore_conf[lcore_id];
+ for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
+ printf("\nlcore id:%d\n", lcore_id);
+ printf("queue_id:%d\n",queue);
+ printf("Rx pkt %d\n", stats[lcore_id].nb_rx_pkts[queue]);
+ printf("loop number: %d, 0 pkts loop:%d, <32 pkts loop:%d\n",
+ stats[lcore_id].num_loop[queue], stats[lcore_id].none_loop[queue], stats[lcore_id].no_full_loop[queue]);
+ printf("0 pkts loop percentage:%.2f%%, <32 pkts loop percentage:%.2f%%\n",
+ stats[lcore_id].none_loop_per[queue], stats[lcore_id].no_full_loop_per[queue]);
+ printf("------------------------------------\n\n");
+
+ }
+ }
+
+ nic_xstats_display(0);
+ nic_xstats_display(1);
+
RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
--
2.25.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters
2023-05-11 8:25 [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters Feifei Wang
@ 2023-05-11 8:51 ` Jerin Jacob
2023-05-11 8:57 ` Feifei Wang
2023-05-11 13:32 ` Honnappa Nagarahalli
2023-05-11 15:44 ` Stephen Hemminger
1 sibling, 2 replies; 9+ messages in thread
From: Jerin Jacob @ 2023-05-11 8:51 UTC (permalink / raw)
To: Feifei Wang; +Cc: dev, nd, Lijian Zhang, Ruifeng Wang, Honnappa Nagarahalli
On Thu, May 11, 2023 at 1:55 PM Feifei Wang <feifei.wang2@arm.com> wrote:
>
> This patch is to collect empty poll of 'rte_eth_rx_burst' functions in
> dpdk l3fwd application. Empty poll means Rx burst function receives no
> pkts in one loop.
>
> Furthermore, we also add 'nic_xstats_display' API to show NIC counters.
>
> Usage:
> With this patch, no special settings, just run l3fwd, and when you
> stoping l3fwd, thread will print the info above.
>
> Note:
> This patch has just a slight impact on performance and can be ignored.
IMO, We should not introduce regression as l3fwd kind of uses as
reference application.
I think, l3fwd should limit to stats exposed by ethdev(i.e directly
from NIC, without performance regression).
>
> dpdk version:23.03
>
> Suggested-by: Lijian Zhang <lijian.zhang@arm.com>
> Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> ---
> examples/l3fwd/l3fwd.h | 68 ++++++++++++++++++++++++++++++++++++++
> examples/l3fwd/l3fwd_lpm.c | 26 +++++++++++++--
> examples/l3fwd/main.c | 22 ++++++++++++
> 3 files changed, 114 insertions(+), 2 deletions(-)
>
> diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
> index b55855c932..2b3fca62f3 100644
> --- a/examples/l3fwd/l3fwd.h
> +++ b/examples/l3fwd/l3fwd.h
> @@ -56,6 +56,17 @@
> #define L3FWD_HASH_ENTRIES (1024*1024*1)
> #endif
>
> +struct lcore_stats {
> + uint32_t nb_rx_pkts[16];
> + uint32_t num_loop[16];
> + uint32_t none_loop[16];
> + uint32_t no_full_loop[16];
> + float none_loop_per[16];
> + float no_full_loop_per[16];
> +} __rte_cache_aligned;
> +
> +extern struct lcore_stats stats[RTE_MAX_LCORE];
> +
> struct parm_cfg {
> const char *rule_ipv4_name;
> const char *rule_ipv6_name;
> @@ -115,6 +126,63 @@ extern struct acl_algorithms acl_alg[];
>
> extern uint32_t max_pkt_len;
>
> +static inline void
> +nic_xstats_display(uint32_t port_id)
> +{
> + struct rte_eth_xstat *xstats;
> + int cnt_xstats, idx_xstat;
> + struct rte_eth_xstat_name *xstats_names;
> +
> + printf("###### NIC extended statistics for port %-2d\n", port_id);
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + fprintf(stderr, "Error: Invalid port number %i\n", port_id);
> + return;
> + }
> +
> + /* Get count */
> + cnt_xstats = rte_eth_xstats_get_names(port_id, NULL, 0);
> + if (cnt_xstats < 0) {
> + fprintf(stderr, "Error: Cannot get count of xstats\n");
> + return;
> + }
> +
> + /* Get id-name lookup table */
> + xstats_names = malloc(sizeof(struct rte_eth_xstat_name) * cnt_xstats);
> + if (xstats_names == NULL) {
> + fprintf(stderr, "Cannot allocate memory for xstats lookup\n");
> + return;
> + }
> + if (cnt_xstats != rte_eth_xstats_get_names(
> + port_id, xstats_names, cnt_xstats)) {
> + fprintf(stderr, "Error: Cannot get xstats lookup\n");
> + free(xstats_names);
> + return;
> + }
> +
> + /* Get stats themselves */
> + xstats = malloc(sizeof(struct rte_eth_xstat) * cnt_xstats);
> + if (xstats == NULL) {
> + fprintf(stderr, "Cannot allocate memory for xstats\n");
> + free(xstats_names);
> + return;
> + }
> + if (cnt_xstats != rte_eth_xstats_get(port_id, xstats, cnt_xstats)) {
> + fprintf(stderr, "Error: Unable to get xstats\n");
> + free(xstats_names);
> + free(xstats);
> + return;
> + }
> +
> + /* Display xstats */
> + for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++) {
> + printf("%s: %"PRIu64"\n",
> + xstats_names[idx_xstat].name,
> + xstats[idx_xstat].value);
> + }
> + free(xstats_names);
> + free(xstats);
> +}
> +
> /* Send burst of packets on an output interface */
> static inline int
> send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
> diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
> index 4ac1925c84..9e27e954b9 100644
> --- a/examples/l3fwd/l3fwd_lpm.c
> +++ b/examples/l3fwd/l3fwd_lpm.c
> @@ -41,6 +41,8 @@
> static struct rte_lpm *ipv4_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> static struct rte_lpm6 *ipv6_l3fwd_lpm_lookup_struct[NB_SOCKETS];
>
> +extern struct lcore_stats stats[RTE_MAX_LCORE];
> +
> /* Performing LPM-based lookups. 8< */
> static inline uint16_t
> lpm_get_ipv4_dst_port(const struct rte_ipv4_hdr *ipv4_hdr,
> @@ -153,6 +155,7 @@ lpm_main_loop(__rte_unused void *dummy)
> struct lcore_conf *qconf;
> const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
> US_PER_S * BURST_TX_DRAIN_US;
> + bool start_count = 0;
>
> lcore_id = rte_lcore_id();
> qconf = &lcore_conf[lcore_id];
> @@ -207,8 +210,22 @@ lpm_main_loop(__rte_unused void *dummy)
> queueid = qconf->rx_queue_list[i].queue_id;
> nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> MAX_PKT_BURST);
> - if (nb_rx == 0)
> - continue;
> + if (start_count == 0) {
> + if (nb_rx != 0)
> + start_count = 1;
> + }
> +
> + if (start_count == 1) {
> + stats[lcore_id].nb_rx_pkts[i] += nb_rx;
> + stats[lcore_id].num_loop[i]++;
> + if (nb_rx < MAX_PKT_BURST && nb_rx > 0)
> + stats[lcore_id].no_full_loop[i]++;
> +
> + if (nb_rx == 0) {
> + stats[lcore_id].none_loop[i]++;
> + continue;
> + }
> + }
>
> #if defined RTE_ARCH_X86 || defined __ARM_NEON \
> || defined RTE_ARCH_PPC_64
> @@ -223,6 +240,11 @@ lpm_main_loop(__rte_unused void *dummy)
> cur_tsc = rte_rdtsc();
> }
>
> + for (i = 0; i < n_rx_q; ++i) {
> + stats[lcore_id].none_loop_per[i] = (float)stats[lcore_id].none_loop[i]/stats[lcore_id].num_loop[i]*100;
> + stats[lcore_id].no_full_loop_per[i] = (float)stats[lcore_id].no_full_loop[i]/stats[lcore_id].num_loop[i]*100;
> + }
> +
> return 0;
> }
>
> diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> index a4f061537e..4727215eae 100644
> --- a/examples/l3fwd/main.c
> +++ b/examples/l3fwd/main.c
> @@ -53,6 +53,8 @@
>
> #define MAX_LCORE_PARAMS 1024
>
> +struct lcore_stats stats[RTE_MAX_LCORE];
> +
> uint16_t nb_rxd = RX_DESC_DEFAULT;
> uint16_t nb_txd = TX_DESC_DEFAULT;
>
> @@ -1592,6 +1594,26 @@ main(int argc, char **argv)
> } else {
> rte_eal_mp_wait_lcore();
>
> + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> + if (rte_lcore_is_enabled(lcore_id) == 0)
> + continue;
> + qconf = &lcore_conf[lcore_id];
> + for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
> + printf("\nlcore id:%d\n", lcore_id);
> + printf("queue_id:%d\n",queue);
> + printf("Rx pkt %d\n", stats[lcore_id].nb_rx_pkts[queue]);
> + printf("loop number: %d, 0 pkts loop:%d, <32 pkts loop:%d\n",
> + stats[lcore_id].num_loop[queue], stats[lcore_id].none_loop[queue], stats[lcore_id].no_full_loop[queue]);
> + printf("0 pkts loop percentage:%.2f%%, <32 pkts loop percentage:%.2f%%\n",
> + stats[lcore_id].none_loop_per[queue], stats[lcore_id].no_full_loop_per[queue]);
> + printf("------------------------------------\n\n");
> +
> + }
> + }
> +
> + nic_xstats_display(0);
> + nic_xstats_display(1);
> +
> RTE_ETH_FOREACH_DEV(portid) {
> if ((enabled_port_mask & (1 << portid)) == 0)
> continue;
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters
2023-05-11 8:51 ` Jerin Jacob
@ 2023-05-11 8:57 ` Feifei Wang
2023-05-11 13:32 ` Honnappa Nagarahalli
1 sibling, 0 replies; 9+ messages in thread
From: Feifei Wang @ 2023-05-11 8:57 UTC (permalink / raw)
To: Jerin Jacob; +Cc: dev, nd, Lijian Zhang, Ruifeng Wang, Honnappa Nagarahalli, nd
> -----Original Message-----
> From: Jerin Jacob <jerinjacobk@gmail.com>
> Sent: Thursday, May 11, 2023 4:51 PM
> To: Feifei Wang <Feifei.Wang2@arm.com>
> Cc: dev@dpdk.org; nd <nd@arm.com>; Lijian Zhang
> <Lijian.Zhang@arm.com>; Ruifeng Wang <Ruifeng.Wang@arm.com>;
> Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
> Subject: Re: [PATCH] examples/l3fwd: add hard code to collect empty poll and
> NIC counters
>
> On Thu, May 11, 2023 at 1:55 PM Feifei Wang <feifei.wang2@arm.com>
> wrote:
> >
> > This patch is to collect empty poll of 'rte_eth_rx_burst' functions in
> > dpdk l3fwd application. Empty poll means Rx burst function receives no
> > pkts in one loop.
> >
> > Furthermore, we also add 'nic_xstats_display' API to show NIC counters.
> >
> > Usage:
> > With this patch, no special settings, just run l3fwd, and when you
> > stoping l3fwd, thread will print the info above.
> >
> > Note:
> > This patch has just a slight impact on performance and can be ignored.
>
> IMO, We should not introduce regression as l3fwd kind of uses as reference
> application.
> I think, l3fwd should limit to stats exposed by ethdev(i.e directly from NIC,
> without performance regression).
>
Ok, thanks very much for quick review and the comment.
I think maybe we can add counter collect for testpmd.
And this can help users to analyze the performance of dpdk.
>
>
> >
> > dpdk version:23.03
> >
> > Suggested-by: Lijian Zhang <lijian.zhang@arm.com>
> > Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
> > Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> > ---
> > examples/l3fwd/l3fwd.h | 68
> ++++++++++++++++++++++++++++++++++++++
> > examples/l3fwd/l3fwd_lpm.c | 26 +++++++++++++--
> > examples/l3fwd/main.c | 22 ++++++++++++
> > 3 files changed, 114 insertions(+), 2 deletions(-)
> >
> > diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h index
> > b55855c932..2b3fca62f3 100644
> > --- a/examples/l3fwd/l3fwd.h
> > +++ b/examples/l3fwd/l3fwd.h
> > @@ -56,6 +56,17 @@
> > #define L3FWD_HASH_ENTRIES (1024*1024*1)
> > #endif
> >
> > +struct lcore_stats {
> > + uint32_t nb_rx_pkts[16];
> > + uint32_t num_loop[16];
> > + uint32_t none_loop[16];
> > + uint32_t no_full_loop[16];
> > + float none_loop_per[16];
> > + float no_full_loop_per[16];
> > +} __rte_cache_aligned;
> > +
> > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > +
> > struct parm_cfg {
> > const char *rule_ipv4_name;
> > const char *rule_ipv6_name;
> > @@ -115,6 +126,63 @@ extern struct acl_algorithms acl_alg[];
> >
> > extern uint32_t max_pkt_len;
> >
> > +static inline void
> > +nic_xstats_display(uint32_t port_id)
> > +{
> > + struct rte_eth_xstat *xstats;
> > + int cnt_xstats, idx_xstat;
> > + struct rte_eth_xstat_name *xstats_names;
> > +
> > + printf("###### NIC extended statistics for port %-2d\n", port_id);
> > + if (!rte_eth_dev_is_valid_port(port_id)) {
> > + fprintf(stderr, "Error: Invalid port number %i\n", port_id);
> > + return;
> > + }
> > +
> > + /* Get count */
> > + cnt_xstats = rte_eth_xstats_get_names(port_id, NULL, 0);
> > + if (cnt_xstats < 0) {
> > + fprintf(stderr, "Error: Cannot get count of xstats\n");
> > + return;
> > + }
> > +
> > + /* Get id-name lookup table */
> > + xstats_names = malloc(sizeof(struct rte_eth_xstat_name) * cnt_xstats);
> > + if (xstats_names == NULL) {
> > + fprintf(stderr, "Cannot allocate memory for xstats lookup\n");
> > + return;
> > + }
> > + if (cnt_xstats != rte_eth_xstats_get_names(
> > + port_id, xstats_names, cnt_xstats)) {
> > + fprintf(stderr, "Error: Cannot get xstats lookup\n");
> > + free(xstats_names);
> > + return;
> > + }
> > +
> > + /* Get stats themselves */
> > + xstats = malloc(sizeof(struct rte_eth_xstat) * cnt_xstats);
> > + if (xstats == NULL) {
> > + fprintf(stderr, "Cannot allocate memory for xstats\n");
> > + free(xstats_names);
> > + return;
> > + }
> > + if (cnt_xstats != rte_eth_xstats_get(port_id, xstats, cnt_xstats)) {
> > + fprintf(stderr, "Error: Unable to get xstats\n");
> > + free(xstats_names);
> > + free(xstats);
> > + return;
> > + }
> > +
> > + /* Display xstats */
> > + for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++) {
> > + printf("%s: %"PRIu64"\n",
> > + xstats_names[idx_xstat].name,
> > + xstats[idx_xstat].value);
> > + }
> > + free(xstats_names);
> > + free(xstats);
> > +}
> > +
> > /* Send burst of packets on an output interface */ static inline int
> > send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port) diff
> > --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c index
> > 4ac1925c84..9e27e954b9 100644
> > --- a/examples/l3fwd/l3fwd_lpm.c
> > +++ b/examples/l3fwd/l3fwd_lpm.c
> > @@ -41,6 +41,8 @@
> > static struct rte_lpm *ipv4_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> > static struct rte_lpm6 *ipv6_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> >
> > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > +
> > /* Performing LPM-based lookups. 8< */ static inline uint16_t
> > lpm_get_ipv4_dst_port(const struct rte_ipv4_hdr *ipv4_hdr, @@ -153,6
> > +155,7 @@ lpm_main_loop(__rte_unused void *dummy)
> > struct lcore_conf *qconf;
> > const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
> > US_PER_S * BURST_TX_DRAIN_US;
> > + bool start_count = 0;
> >
> > lcore_id = rte_lcore_id();
> > qconf = &lcore_conf[lcore_id]; @@ -207,8 +210,22 @@
> > lpm_main_loop(__rte_unused void *dummy)
> > queueid = qconf->rx_queue_list[i].queue_id;
> > nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> > MAX_PKT_BURST);
> > - if (nb_rx == 0)
> > - continue;
> > + if (start_count == 0) {
> > + if (nb_rx != 0)
> > + start_count = 1;
> > + }
> > +
> > + if (start_count == 1) {
> > + stats[lcore_id].nb_rx_pkts[i] += nb_rx;
> > + stats[lcore_id].num_loop[i]++;
> > + if (nb_rx < MAX_PKT_BURST && nb_rx > 0)
> > +
> > + stats[lcore_id].no_full_loop[i]++;
> > +
> > + if (nb_rx == 0) {
> > + stats[lcore_id].none_loop[i]++;
> > + continue;
> > + }
> > + }
> >
> > #if defined RTE_ARCH_X86 || defined __ARM_NEON \
> > || defined RTE_ARCH_PPC_64 @@ -223,6 +240,11
> > @@ lpm_main_loop(__rte_unused void *dummy)
> > cur_tsc = rte_rdtsc();
> > }
> >
> > + for (i = 0; i < n_rx_q; ++i) {
> > + stats[lcore_id].none_loop_per[i] =
> (float)stats[lcore_id].none_loop[i]/stats[lcore_id].num_loop[i]*100;
> > + stats[lcore_id].no_full_loop_per[i] =
> (float)stats[lcore_id].no_full_loop[i]/stats[lcore_id].num_loop[i]*100;
> > + }
> > +
> > return 0;
> > }
> >
> > diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c index
> > a4f061537e..4727215eae 100644
> > --- a/examples/l3fwd/main.c
> > +++ b/examples/l3fwd/main.c
> > @@ -53,6 +53,8 @@
> >
> > #define MAX_LCORE_PARAMS 1024
> >
> > +struct lcore_stats stats[RTE_MAX_LCORE];
> > +
> > uint16_t nb_rxd = RX_DESC_DEFAULT;
> > uint16_t nb_txd = TX_DESC_DEFAULT;
> >
> > @@ -1592,6 +1594,26 @@ main(int argc, char **argv)
> > } else {
> > rte_eal_mp_wait_lcore();
> >
> > + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> > + if (rte_lcore_is_enabled(lcore_id) == 0)
> > + continue;
> > + qconf = &lcore_conf[lcore_id];
> > + for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
> > + printf("\nlcore id:%d\n", lcore_id);
> > + printf("queue_id:%d\n",queue);
> > + printf("Rx pkt %d\n", stats[lcore_id].nb_rx_pkts[queue]);
> > + printf("loop number: %d, 0 pkts loop:%d, <32 pkts
> loop:%d\n",
> > + stats[lcore_id].num_loop[queue],
> stats[lcore_id].none_loop[queue], stats[lcore_id].no_full_loop[queue]);
> > + printf("0 pkts loop percentage:%.2f%%, <32 pkts loop
> percentage:%.2f%%\n",
> > + stats[lcore_id].none_loop_per[queue],
> stats[lcore_id].no_full_loop_per[queue]);
> > +
> > + printf("------------------------------------\n\n");
> > +
> > + }
> > + }
> > +
> > + nic_xstats_display(0);
> > + nic_xstats_display(1);
> > +
> > RTE_ETH_FOREACH_DEV(portid) {
> > if ((enabled_port_mask & (1 << portid)) == 0)
> > continue;
> > --
> > 2.25.1
> >
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters
2023-05-11 8:51 ` Jerin Jacob
2023-05-11 8:57 ` Feifei Wang
@ 2023-05-11 13:32 ` Honnappa Nagarahalli
2023-05-12 1:52 ` Feifei Wang
2023-05-12 12:02 ` Jerin Jacob
1 sibling, 2 replies; 9+ messages in thread
From: Honnappa Nagarahalli @ 2023-05-11 13:32 UTC (permalink / raw)
To: Jerin Jacob, Feifei Wang; +Cc: dev, nd, Lijian Zhang, Ruifeng Wang, nd
<snip>
>
> On Thu, May 11, 2023 at 1:55 PM Feifei Wang <feifei.wang2@arm.com>
> wrote:
> >
> > This patch is to collect empty poll of 'rte_eth_rx_burst' functions in
> > dpdk l3fwd application. Empty poll means Rx burst function receives no
> > pkts in one loop.
> >
> > Furthermore, we also add 'nic_xstats_display' API to show NIC counters.
> >
> > Usage:
> > With this patch, no special settings, just run l3fwd, and when you
> > stoping l3fwd, thread will print the info above.
> >
> > Note:
> > This patch has just a slight impact on performance and can be ignored.
How much is the regression?
>
> IMO, We should not introduce regression as l3fwd kind of uses as reference
> application.
> I think, l3fwd should limit to stats exposed by ethdev(i.e directly from NIC,
> without performance regression).
Agree L3fwd is the reference app. Unfortunately, it is not in a state to debug any problems. May be many are just believing the numbers without understanding that there are problems.
Can we place these stats under a run time flag and reduce the impact further?
>
>
>
> >
> > dpdk version:23.03
> >
> > Suggested-by: Lijian Zhang <lijian.zhang@arm.com>
> > Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
> > Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> > ---
> > examples/l3fwd/l3fwd.h | 68
> ++++++++++++++++++++++++++++++++++++++
> > examples/l3fwd/l3fwd_lpm.c | 26 +++++++++++++--
> > examples/l3fwd/main.c | 22 ++++++++++++
> > 3 files changed, 114 insertions(+), 2 deletions(-)
> >
> > diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h index
> > b55855c932..2b3fca62f3 100644
> > --- a/examples/l3fwd/l3fwd.h
> > +++ b/examples/l3fwd/l3fwd.h
> > @@ -56,6 +56,17 @@
> > #define L3FWD_HASH_ENTRIES (1024*1024*1)
> > #endif
> >
> > +struct lcore_stats {
> > + uint32_t nb_rx_pkts[16];
> > + uint32_t num_loop[16];
> > + uint32_t none_loop[16];
> > + uint32_t no_full_loop[16];
> > + float none_loop_per[16];
> > + float no_full_loop_per[16];
> > +} __rte_cache_aligned;
> > +
> > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > +
> > struct parm_cfg {
> > const char *rule_ipv4_name;
> > const char *rule_ipv6_name;
> > @@ -115,6 +126,63 @@ extern struct acl_algorithms acl_alg[];
> >
> > extern uint32_t max_pkt_len;
> >
> > +static inline void
> > +nic_xstats_display(uint32_t port_id)
> > +{
> > + struct rte_eth_xstat *xstats;
> > + int cnt_xstats, idx_xstat;
> > + struct rte_eth_xstat_name *xstats_names;
> > +
> > + printf("###### NIC extended statistics for port %-2d\n", port_id);
> > + if (!rte_eth_dev_is_valid_port(port_id)) {
> > + fprintf(stderr, "Error: Invalid port number %i\n", port_id);
> > + return;
> > + }
> > +
> > + /* Get count */
> > + cnt_xstats = rte_eth_xstats_get_names(port_id, NULL, 0);
> > + if (cnt_xstats < 0) {
> > + fprintf(stderr, "Error: Cannot get count of xstats\n");
> > + return;
> > + }
> > +
> > + /* Get id-name lookup table */
> > + xstats_names = malloc(sizeof(struct rte_eth_xstat_name) * cnt_xstats);
> > + if (xstats_names == NULL) {
> > + fprintf(stderr, "Cannot allocate memory for xstats lookup\n");
> > + return;
> > + }
> > + if (cnt_xstats != rte_eth_xstats_get_names(
> > + port_id, xstats_names, cnt_xstats)) {
> > + fprintf(stderr, "Error: Cannot get xstats lookup\n");
> > + free(xstats_names);
> > + return;
> > + }
> > +
> > + /* Get stats themselves */
> > + xstats = malloc(sizeof(struct rte_eth_xstat) * cnt_xstats);
> > + if (xstats == NULL) {
> > + fprintf(stderr, "Cannot allocate memory for xstats\n");
> > + free(xstats_names);
> > + return;
> > + }
> > + if (cnt_xstats != rte_eth_xstats_get(port_id, xstats, cnt_xstats)) {
> > + fprintf(stderr, "Error: Unable to get xstats\n");
> > + free(xstats_names);
> > + free(xstats);
> > + return;
> > + }
> > +
> > + /* Display xstats */
> > + for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++) {
> > + printf("%s: %"PRIu64"\n",
> > + xstats_names[idx_xstat].name,
> > + xstats[idx_xstat].value);
> > + }
> > + free(xstats_names);
> > + free(xstats);
> > +}
> > +
> > /* Send burst of packets on an output interface */ static inline int
> > send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port) diff
> > --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c index
> > 4ac1925c84..9e27e954b9 100644
> > --- a/examples/l3fwd/l3fwd_lpm.c
> > +++ b/examples/l3fwd/l3fwd_lpm.c
> > @@ -41,6 +41,8 @@
> > static struct rte_lpm *ipv4_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> > static struct rte_lpm6 *ipv6_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> >
> > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > +
> > /* Performing LPM-based lookups. 8< */ static inline uint16_t
> > lpm_get_ipv4_dst_port(const struct rte_ipv4_hdr *ipv4_hdr, @@ -153,6
> > +155,7 @@ lpm_main_loop(__rte_unused void *dummy)
> > struct lcore_conf *qconf;
> > const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
> > US_PER_S * BURST_TX_DRAIN_US;
> > + bool start_count = 0;
> >
> > lcore_id = rte_lcore_id();
> > qconf = &lcore_conf[lcore_id]; @@ -207,8 +210,22 @@
> > lpm_main_loop(__rte_unused void *dummy)
> > queueid = qconf->rx_queue_list[i].queue_id;
> > nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> > MAX_PKT_BURST);
> > - if (nb_rx == 0)
> > - continue;
> > + if (start_count == 0) {
> > + if (nb_rx != 0)
> > + start_count = 1;
> > + }
> > +
> > + if (start_count == 1) {
> > + stats[lcore_id].nb_rx_pkts[i] += nb_rx;
> > + stats[lcore_id].num_loop[i]++;
> > + if (nb_rx < MAX_PKT_BURST && nb_rx > 0)
> > +
> > + stats[lcore_id].no_full_loop[i]++;
> > +
> > + if (nb_rx == 0) {
> > + stats[lcore_id].none_loop[i]++;
> > + continue;
> > + }
> > + }
> >
> > #if defined RTE_ARCH_X86 || defined __ARM_NEON \
> > || defined RTE_ARCH_PPC_64 @@ -223,6 +240,11
> > @@ lpm_main_loop(__rte_unused void *dummy)
> > cur_tsc = rte_rdtsc();
> > }
> >
> > + for (i = 0; i < n_rx_q; ++i) {
> > + stats[lcore_id].none_loop_per[i] =
> (float)stats[lcore_id].none_loop[i]/stats[lcore_id].num_loop[i]*100;
> > + stats[lcore_id].no_full_loop_per[i] =
> (float)stats[lcore_id].no_full_loop[i]/stats[lcore_id].num_loop[i]*100;
> > + }
> > +
> > return 0;
> > }
> >
> > diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c index
> > a4f061537e..4727215eae 100644
> > --- a/examples/l3fwd/main.c
> > +++ b/examples/l3fwd/main.c
> > @@ -53,6 +53,8 @@
> >
> > #define MAX_LCORE_PARAMS 1024
> >
> > +struct lcore_stats stats[RTE_MAX_LCORE];
> > +
> > uint16_t nb_rxd = RX_DESC_DEFAULT;
> > uint16_t nb_txd = TX_DESC_DEFAULT;
> >
> > @@ -1592,6 +1594,26 @@ main(int argc, char **argv)
> > } else {
> > rte_eal_mp_wait_lcore();
> >
> > + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> > + if (rte_lcore_is_enabled(lcore_id) == 0)
> > + continue;
> > + qconf = &lcore_conf[lcore_id];
> > + for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
> > + printf("\nlcore id:%d\n", lcore_id);
> > + printf("queue_id:%d\n",queue);
> > + printf("Rx pkt %d\n", stats[lcore_id].nb_rx_pkts[queue]);
> > + printf("loop number: %d, 0 pkts loop:%d, <32 pkts
> loop:%d\n",
> > + stats[lcore_id].num_loop[queue],
> stats[lcore_id].none_loop[queue], stats[lcore_id].no_full_loop[queue]);
> > + printf("0 pkts loop percentage:%.2f%%, <32 pkts loop
> percentage:%.2f%%\n",
> > + stats[lcore_id].none_loop_per[queue],
> stats[lcore_id].no_full_loop_per[queue]);
> > +
> > + printf("------------------------------------\n\n");
> > +
> > + }
> > + }
> > +
> > + nic_xstats_display(0);
> > + nic_xstats_display(1);
> > +
> > RTE_ETH_FOREACH_DEV(portid) {
> > if ((enabled_port_mask & (1 << portid)) == 0)
> > continue;
> > --
> > 2.25.1
> >
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters
2023-05-11 8:25 [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters Feifei Wang
2023-05-11 8:51 ` Jerin Jacob
@ 2023-05-11 15:44 ` Stephen Hemminger
2023-05-16 6:19 ` Feifei Wang
1 sibling, 1 reply; 9+ messages in thread
From: Stephen Hemminger @ 2023-05-11 15:44 UTC (permalink / raw)
To: Feifei Wang; +Cc: dev, nd, Lijian Zhang, Ruifeng Wang, Honnappa Nagarahalli
On Thu, 11 May 2023 16:25:19 +0800
Feifei Wang <feifei.wang2@arm.com> wrote:
> This patch is to collect empty poll of 'rte_eth_rx_burst' functions in
> dpdk l3fwd application. Empty poll means Rx burst function receives no
> pkts in one loop.
>
> Furthermore, we also add 'nic_xstats_display' API to show NIC counters.
>
> Usage:
> With this patch, no special settings, just run l3fwd, and when you
> stoping l3fwd, thread will print the info above.
>
> Note:
> This patch has just a slight impact on performance and can be ignored.
There was a set of other patches around telemetry.
Shouldn't this example use some of that rather than "roll your own"?
>
> dpdk version:23.03
>
> Suggested-by: Lijian Zhang <lijian.zhang@arm.com>
> Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> ---
> examples/l3fwd/l3fwd.h | 68 ++++++++++++++++++++++++++++++++++++++
> examples/l3fwd/l3fwd_lpm.c | 26 +++++++++++++--
> examples/l3fwd/main.c | 22 ++++++++++++
> 3 files changed, 114 insertions(+), 2 deletions(-)
>
> diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
> index b55855c932..2b3fca62f3 100644
> --- a/examples/l3fwd/l3fwd.h
> +++ b/examples/l3fwd/l3fwd.h
> @@ -56,6 +56,17 @@
> #define L3FWD_HASH_ENTRIES (1024*1024*1)
> #endif
>
> +struct lcore_stats {
> + uint32_t nb_rx_pkts[16];
> + uint32_t num_loop[16];
> + uint32_t none_loop[16];
> + uint32_t no_full_loop[16];
> + float none_loop_per[16];
> + float no_full_loop_per[16];
> +} __rte_cache_aligned;
What is the 16 magic value?
Use double instead of float to keep more accuracy?
There maybe holes in this structure?
You may want to allocate it at runtime based on number of actual
cores and get it on the right NUMA node.
> +
> +extern struct lcore_stats stats[RTE_MAX_LCORE];
> +
> struct parm_cfg {
> const char *rule_ipv4_name;
> const char *rule_ipv6_name;
> @@ -115,6 +126,63 @@ extern struct acl_algorithms acl_alg[];
>
> extern uint32_t max_pkt_len;
>
> +static inline void
> +nic_xstats_display(uint32_t port_id)
> +{
> + struct rte_eth_xstat *xstats;
> + int cnt_xstats, idx_xstat;
> + struct rte_eth_xstat_name *xstats_names;
> +
> + printf("###### NIC extended statistics for port %-2d\n", port_id);
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + fprintf(stderr, "Error: Invalid port number %i\n", port_id);
> + return;
> + }
> +
> + /* Get count */
> + cnt_xstats = rte_eth_xstats_get_names(port_id, NULL, 0);
> + if (cnt_xstats < 0) {
> + fprintf(stderr, "Error: Cannot get count of xstats\n");
> + return;
> + }
> +
> + /* Get id-name lookup table */
> + xstats_names = malloc(sizeof(struct rte_eth_xstat_name) * cnt_xstats);
> + if (xstats_names == NULL) {
> + fprintf(stderr, "Cannot allocate memory for xstats lookup\n");
> + return;
> + }
> + if (cnt_xstats != rte_eth_xstats_get_names(
> + port_id, xstats_names, cnt_xstats)) {
> + fprintf(stderr, "Error: Cannot get xstats lookup\n");
> + free(xstats_names);
> + return;
> + }
> +
> + /* Get stats themselves */
> + xstats = malloc(sizeof(struct rte_eth_xstat) * cnt_xstats);
> + if (xstats == NULL) {
> + fprintf(stderr, "Cannot allocate memory for xstats\n");
> + free(xstats_names);
> + return;
> + }
> + if (cnt_xstats != rte_eth_xstats_get(port_id, xstats, cnt_xstats)) {
> + fprintf(stderr, "Error: Unable to get xstats\n");
> + free(xstats_names);
> + free(xstats);
> + return;
> + }
> +
> + /* Display xstats */
> + for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++) {
> + printf("%s: %"PRIu64"\n",
> + xstats_names[idx_xstat].name,
> + xstats[idx_xstat].value);
> + }
> + free(xstats_names);
> + free(xstats);
> +}
> +
> /* Send burst of packets on an output interface */
> static inline int
> send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
> diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
> index 4ac1925c84..9e27e954b9 100644
> --- a/examples/l3fwd/l3fwd_lpm.c
> +++ b/examples/l3fwd/l3fwd_lpm.c
> @@ -41,6 +41,8 @@
> static struct rte_lpm *ipv4_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> static struct rte_lpm6 *ipv6_l3fwd_lpm_lookup_struct[NB_SOCKETS];
>
> +extern struct lcore_stats stats[RTE_MAX_LCORE];
> +
> /* Performing LPM-based lookups. 8< */
> static inline uint16_t
> lpm_get_ipv4_dst_port(const struct rte_ipv4_hdr *ipv4_hdr,
> @@ -153,6 +155,7 @@ lpm_main_loop(__rte_unused void *dummy)
> struct lcore_conf *qconf;
> const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
> US_PER_S * BURST_TX_DRAIN_US;
> + bool start_count = 0;
>
> lcore_id = rte_lcore_id();
> qconf = &lcore_conf[lcore_id];
> @@ -207,8 +210,22 @@ lpm_main_loop(__rte_unused void *dummy)
> queueid = qconf->rx_queue_list[i].queue_id;
> nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> MAX_PKT_BURST);
> - if (nb_rx == 0)
> - continue;
> + if (start_count == 0) {
> + if (nb_rx != 0)
> + start_count = 1;
> + }
> +
> + if (start_count == 1) {
> + stats[lcore_id].nb_rx_pkts[i] += nb_rx;
> + stats[lcore_id].num_loop[i]++;
> + if (nb_rx < MAX_PKT_BURST && nb_rx > 0)
> + stats[lcore_id].no_full_loop[i]++;
> +
> + if (nb_rx == 0) {
> + stats[lcore_id].none_loop[i]++;
> + continue;
> + }
> + }
On Arm you are going to need to use a barrier or atomic variable for these
otherwise, there is no guarantee that other thread will read the right value.
>
> #if defined RTE_ARCH_X86 || defined __ARM_NEON \
> || defined RTE_ARCH_PPC_64
> @@ -223,6 +240,11 @@ lpm_main_loop(__rte_unused void *dummy)
> cur_tsc = rte_rdtsc();
> }
>
> + for (i = 0; i < n_rx_q; ++i) {
> + stats[lcore_id].none_loop_per[i] = (float)stats[lcore_id].none_loop[i]/stats[lcore_id].num_loop[i]*100;
> + stats[lcore_id].no_full_loop_per[i] = (float)stats[lcore_id].no_full_loop[i]/stats[lcore_id].num_loop[i]*100;
> + }
> +
> return 0;
> }
>
> diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> index a4f061537e..4727215eae 100644
> --- a/examples/l3fwd/main.c
> +++ b/examples/l3fwd/main.c
> @@ -53,6 +53,8 @@
>
> #define MAX_LCORE_PARAMS 1024
>
> +struct lcore_stats stats[RTE_MAX_LCORE];
> +
> uint16_t nb_rxd = RX_DESC_DEFAULT;
> uint16_t nb_txd = TX_DESC_DEFAULT;
>
> @@ -1592,6 +1594,26 @@ main(int argc, char **argv)
> } else {
> rte_eal_mp_wait_lcore();
>
> + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> + if (rte_lcore_is_enabled(lcore_id) == 0)
> + continue;
> + qconf = &lcore_conf[lcore_id];
> + for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
> + printf("\nlcore id:%d\n", lcore_id);
> + printf("queue_id:%d\n",queue);
> + printf("Rx pkt %d\n", stats[lcore_id].nb_rx_pkts[queue]);
> + printf("loop number: %d, 0 pkts loop:%d, <32 pkts loop:%d\n",
> + stats[lcore_id].num_loop[queue], stats[lcore_id].none_loop[queue], stats[lcore_id].no_full_loop[queue]);
> + printf("0 pkts loop percentage:%.2f%%, <32 pkts loop percentage:%.2f%%\n",
> + stats[lcore_id].none_loop_per[queue], stats[lcore_id].no_full_loop_per[queue]);
> + printf("------------------------------------\n\n");
> +
> + }
> + }
> +
> + nic_xstats_display(0);
> + nic_xstats_display(1);
> +
> RTE_ETH_FOREACH_DEV(portid) {
> if ((enabled_port_mask & (1 << portid)) == 0)
> continue;
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters
2023-05-11 13:32 ` Honnappa Nagarahalli
@ 2023-05-12 1:52 ` Feifei Wang
2023-05-12 12:02 ` Jerin Jacob
1 sibling, 0 replies; 9+ messages in thread
From: Feifei Wang @ 2023-05-12 1:52 UTC (permalink / raw)
To: Honnappa Nagarahalli, Jerin Jacob
Cc: dev, nd, Lijian Zhang, Ruifeng Wang, nd, nd
> -----Original Message-----
> From: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
> Sent: Thursday, May 11, 2023 9:32 PM
> To: Jerin Jacob <jerinjacobk@gmail.com>; Feifei Wang
> <Feifei.Wang2@arm.com>
> Cc: dev@dpdk.org; nd <nd@arm.com>; Lijian Zhang
> <Lijian.Zhang@arm.com>; Ruifeng Wang <Ruifeng.Wang@arm.com>; nd
> <nd@arm.com>
> Subject: RE: [PATCH] examples/l3fwd: add hard code to collect empty poll and
> NIC counters
>
> <snip>
>
> >
> > On Thu, May 11, 2023 at 1:55 PM Feifei Wang <feifei.wang2@arm.com>
> > wrote:
> > >
> > > This patch is to collect empty poll of 'rte_eth_rx_burst' functions
> > > in dpdk l3fwd application. Empty poll means Rx burst function
> > > receives no pkts in one loop.
> > >
> > > Furthermore, we also add 'nic_xstats_display' API to show NIC counters.
> > >
> > > Usage:
> > > With this patch, no special settings, just run l3fwd, and when you
> > > stoping l3fwd, thread will print the info above.
> > >
> > > Note:
> > > This patch has just a slight impact on performance and can be ignored.
> How much is the regression?
[Feifei] It is about 1% ~ 2%.
>
> >
> > IMO, We should not introduce regression as l3fwd kind of uses as
> > reference application.
> > I think, l3fwd should limit to stats exposed by ethdev(i.e directly
> > from NIC, without performance regression).
> Agree L3fwd is the reference app. Unfortunately, it is not in a state to debug
> any problems. May be many are just believing the numbers without
> understanding that there are problems.
> Can we place these stats under a run time flag and reduce the impact further?
>
> >
> >
> >
> > >
> > > dpdk version:23.03
> > >
> > > Suggested-by: Lijian Zhang <lijian.zhang@arm.com>
> > > Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
> > > Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > > Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> > > ---
> > > examples/l3fwd/l3fwd.h | 68
> > ++++++++++++++++++++++++++++++++++++++
> > > examples/l3fwd/l3fwd_lpm.c | 26 +++++++++++++--
> > > examples/l3fwd/main.c | 22 ++++++++++++
> > > 3 files changed, 114 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h index
> > > b55855c932..2b3fca62f3 100644
> > > --- a/examples/l3fwd/l3fwd.h
> > > +++ b/examples/l3fwd/l3fwd.h
> > > @@ -56,6 +56,17 @@
> > > #define L3FWD_HASH_ENTRIES (1024*1024*1)
> > > #endif
> > >
> > > +struct lcore_stats {
> > > + uint32_t nb_rx_pkts[16];
> > > + uint32_t num_loop[16];
> > > + uint32_t none_loop[16];
> > > + uint32_t no_full_loop[16];
> > > + float none_loop_per[16];
> > > + float no_full_loop_per[16];
> > > +} __rte_cache_aligned;
> > > +
> > > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > > +
> > > struct parm_cfg {
> > > const char *rule_ipv4_name;
> > > const char *rule_ipv6_name;
> > > @@ -115,6 +126,63 @@ extern struct acl_algorithms acl_alg[];
> > >
> > > extern uint32_t max_pkt_len;
> > >
> > > +static inline void
> > > +nic_xstats_display(uint32_t port_id) {
> > > + struct rte_eth_xstat *xstats;
> > > + int cnt_xstats, idx_xstat;
> > > + struct rte_eth_xstat_name *xstats_names;
> > > +
> > > + printf("###### NIC extended statistics for port %-2d\n", port_id);
> > > + if (!rte_eth_dev_is_valid_port(port_id)) {
> > > + fprintf(stderr, "Error: Invalid port number %i\n", port_id);
> > > + return;
> > > + }
> > > +
> > > + /* Get count */
> > > + cnt_xstats = rte_eth_xstats_get_names(port_id, NULL, 0);
> > > + if (cnt_xstats < 0) {
> > > + fprintf(stderr, "Error: Cannot get count of xstats\n");
> > > + return;
> > > + }
> > > +
> > > + /* Get id-name lookup table */
> > > + xstats_names = malloc(sizeof(struct rte_eth_xstat_name) *
> cnt_xstats);
> > > + if (xstats_names == NULL) {
> > > + fprintf(stderr, "Cannot allocate memory for xstats lookup\n");
> > > + return;
> > > + }
> > > + if (cnt_xstats != rte_eth_xstats_get_names(
> > > + port_id, xstats_names, cnt_xstats)) {
> > > + fprintf(stderr, "Error: Cannot get xstats lookup\n");
> > > + free(xstats_names);
> > > + return;
> > > + }
> > > +
> > > + /* Get stats themselves */
> > > + xstats = malloc(sizeof(struct rte_eth_xstat) * cnt_xstats);
> > > + if (xstats == NULL) {
> > > + fprintf(stderr, "Cannot allocate memory for xstats\n");
> > > + free(xstats_names);
> > > + return;
> > > + }
> > > + if (cnt_xstats != rte_eth_xstats_get(port_id, xstats, cnt_xstats)) {
> > > + fprintf(stderr, "Error: Unable to get xstats\n");
> > > + free(xstats_names);
> > > + free(xstats);
> > > + return;
> > > + }
> > > +
> > > + /* Display xstats */
> > > + for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++) {
> > > + printf("%s: %"PRIu64"\n",
> > > + xstats_names[idx_xstat].name,
> > > + xstats[idx_xstat].value);
> > > + }
> > > + free(xstats_names);
> > > + free(xstats);
> > > +}
> > > +
> > > /* Send burst of packets on an output interface */ static inline
> > > int send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
> > > diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
> > > index
> > > 4ac1925c84..9e27e954b9 100644
> > > --- a/examples/l3fwd/l3fwd_lpm.c
> > > +++ b/examples/l3fwd/l3fwd_lpm.c
> > > @@ -41,6 +41,8 @@
> > > static struct rte_lpm *ipv4_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> > > static struct rte_lpm6 *ipv6_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> > >
> > > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > > +
> > > /* Performing LPM-based lookups. 8< */ static inline uint16_t
> > > lpm_get_ipv4_dst_port(const struct rte_ipv4_hdr *ipv4_hdr, @@ -153,6
> > > +155,7 @@ lpm_main_loop(__rte_unused void *dummy)
> > > struct lcore_conf *qconf;
> > > const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
> > > US_PER_S * BURST_TX_DRAIN_US;
> > > + bool start_count = 0;
> > >
> > > lcore_id = rte_lcore_id();
> > > qconf = &lcore_conf[lcore_id]; @@ -207,8 +210,22 @@
> > > lpm_main_loop(__rte_unused void *dummy)
> > > queueid = qconf->rx_queue_list[i].queue_id;
> > > nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> > > MAX_PKT_BURST);
> > > - if (nb_rx == 0)
> > > - continue;
> > > + if (start_count == 0) {
> > > + if (nb_rx != 0)
> > > + start_count = 1;
> > > + }
> > > +
> > > + if (start_count == 1) {
> > > + stats[lcore_id].nb_rx_pkts[i] += nb_rx;
> > > + stats[lcore_id].num_loop[i]++;
> > > + if (nb_rx < MAX_PKT_BURST && nb_rx >
> > > + 0)
> > > +
> > > + stats[lcore_id].no_full_loop[i]++;
> > > +
> > > + if (nb_rx == 0) {
> > > + stats[lcore_id].none_loop[i]++;
> > > + continue;
> > > + }
> > > + }
> > >
> > > #if defined RTE_ARCH_X86 || defined __ARM_NEON \
> > > || defined RTE_ARCH_PPC_64 @@ -223,6
> > > +240,11 @@ lpm_main_loop(__rte_unused void *dummy)
> > > cur_tsc = rte_rdtsc();
> > > }
> > >
> > > + for (i = 0; i < n_rx_q; ++i) {
> > > + stats[lcore_id].none_loop_per[i] =
> > (float)stats[lcore_id].none_loop[i]/stats[lcore_id].num_loop[i]*100;
> > > + stats[lcore_id].no_full_loop_per[i] =
> > (float)stats[lcore_id].no_full_loop[i]/stats[lcore_id].num_loop[i]*100
> > ;
> > > + }
> > > +
> > > return 0;
> > > }
> > >
> > > diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c index
> > > a4f061537e..4727215eae 100644
> > > --- a/examples/l3fwd/main.c
> > > +++ b/examples/l3fwd/main.c
> > > @@ -53,6 +53,8 @@
> > >
> > > #define MAX_LCORE_PARAMS 1024
> > >
> > > +struct lcore_stats stats[RTE_MAX_LCORE];
> > > +
> > > uint16_t nb_rxd = RX_DESC_DEFAULT;
> > > uint16_t nb_txd = TX_DESC_DEFAULT;
> > >
> > > @@ -1592,6 +1594,26 @@ main(int argc, char **argv)
> > > } else {
> > > rte_eal_mp_wait_lcore();
> > >
> > > + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> > > + if (rte_lcore_is_enabled(lcore_id) == 0)
> > > + continue;
> > > + qconf = &lcore_conf[lcore_id];
> > > + for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
> > > + printf("\nlcore id:%d\n", lcore_id);
> > > + printf("queue_id:%d\n",queue);
> > > + printf("Rx pkt %d\n", stats[lcore_id].nb_rx_pkts[queue]);
> > > + printf("loop number: %d, 0 pkts
> > > + loop:%d, <32 pkts
> > loop:%d\n",
> > > +
> > > + stats[lcore_id].num_loop[queue],
> > stats[lcore_id].none_loop[queue],
> > stats[lcore_id].no_full_loop[queue]);
> > > + printf("0 pkts loop
> > > + percentage:%.2f%%, <32 pkts loop
> > percentage:%.2f%%\n",
> > > +
> > > + stats[lcore_id].none_loop_per[queue],
> > stats[lcore_id].no_full_loop_per[queue]);
> > > +
> > > + printf("------------------------------------\n\n");
> > > +
> > > + }
> > > + }
> > > +
> > > + nic_xstats_display(0);
> > > + nic_xstats_display(1);
> > > +
> > > RTE_ETH_FOREACH_DEV(portid) {
> > > if ((enabled_port_mask & (1 << portid)) == 0)
> > > continue;
> > > --
> > > 2.25.1
> > >
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters
2023-05-11 13:32 ` Honnappa Nagarahalli
2023-05-12 1:52 ` Feifei Wang
@ 2023-05-12 12:02 ` Jerin Jacob
2023-05-15 22:50 ` Honnappa Nagarahalli
1 sibling, 1 reply; 9+ messages in thread
From: Jerin Jacob @ 2023-05-12 12:02 UTC (permalink / raw)
To: Honnappa Nagarahalli; +Cc: Feifei Wang, dev, nd, Lijian Zhang, Ruifeng Wang
On Thu, May 11, 2023 at 7:02 PM Honnappa Nagarahalli
<Honnappa.Nagarahalli@arm.com> wrote:
>
> <snip>
>
> >
> > On Thu, May 11, 2023 at 1:55 PM Feifei Wang <feifei.wang2@arm.com>
> > wrote:
> > >
> > > This patch is to collect empty poll of 'rte_eth_rx_burst' functions in
> > > dpdk l3fwd application. Empty poll means Rx burst function receives no
> > > pkts in one loop.
> > >
> > > Furthermore, we also add 'nic_xstats_display' API to show NIC counters.
> > >
> > > Usage:
> > > With this patch, no special settings, just run l3fwd, and when you
> > > stoping l3fwd, thread will print the info above.
> > >
> > > Note:
> > > This patch has just a slight impact on performance and can be ignored.
> How much is the regression?
>
> >
> > IMO, We should not introduce regression as l3fwd kind of uses as reference
> > application.
> > I think, l3fwd should limit to stats exposed by ethdev(i.e directly from NIC,
> > without performance regression).
> Agree L3fwd is the reference app. Unfortunately, it is not in a state to debug any problems. May be many are just believing the numbers without understanding that there are problems.
> Can we place these stats under a run time flag and reduce the impact further?
I think, example applications, we can have compile time option for new
feature addtions in fastpath or add new forwarding mode in testpmd.
>
> >
> >
> >
> > >
> > > dpdk version:23.03
> > >
> > > Suggested-by: Lijian Zhang <lijian.zhang@arm.com>
> > > Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
> > > Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > > Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> > > ---
> > > examples/l3fwd/l3fwd.h | 68
> > ++++++++++++++++++++++++++++++++++++++
> > > examples/l3fwd/l3fwd_lpm.c | 26 +++++++++++++--
> > > examples/l3fwd/main.c | 22 ++++++++++++
> > > 3 files changed, 114 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h index
> > > b55855c932..2b3fca62f3 100644
> > > --- a/examples/l3fwd/l3fwd.h
> > > +++ b/examples/l3fwd/l3fwd.h
> > > @@ -56,6 +56,17 @@
> > > #define L3FWD_HASH_ENTRIES (1024*1024*1)
> > > #endif
> > >
> > > +struct lcore_stats {
> > > + uint32_t nb_rx_pkts[16];
> > > + uint32_t num_loop[16];
> > > + uint32_t none_loop[16];
> > > + uint32_t no_full_loop[16];
> > > + float none_loop_per[16];
> > > + float no_full_loop_per[16];
> > > +} __rte_cache_aligned;
> > > +
> > > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > > +
> > > struct parm_cfg {
> > > const char *rule_ipv4_name;
> > > const char *rule_ipv6_name;
> > > @@ -115,6 +126,63 @@ extern struct acl_algorithms acl_alg[];
> > >
> > > extern uint32_t max_pkt_len;
> > >
> > > +static inline void
> > > +nic_xstats_display(uint32_t port_id)
> > > +{
> > > + struct rte_eth_xstat *xstats;
> > > + int cnt_xstats, idx_xstat;
> > > + struct rte_eth_xstat_name *xstats_names;
> > > +
> > > + printf("###### NIC extended statistics for port %-2d\n", port_id);
> > > + if (!rte_eth_dev_is_valid_port(port_id)) {
> > > + fprintf(stderr, "Error: Invalid port number %i\n", port_id);
> > > + return;
> > > + }
> > > +
> > > + /* Get count */
> > > + cnt_xstats = rte_eth_xstats_get_names(port_id, NULL, 0);
> > > + if (cnt_xstats < 0) {
> > > + fprintf(stderr, "Error: Cannot get count of xstats\n");
> > > + return;
> > > + }
> > > +
> > > + /* Get id-name lookup table */
> > > + xstats_names = malloc(sizeof(struct rte_eth_xstat_name) * cnt_xstats);
> > > + if (xstats_names == NULL) {
> > > + fprintf(stderr, "Cannot allocate memory for xstats lookup\n");
> > > + return;
> > > + }
> > > + if (cnt_xstats != rte_eth_xstats_get_names(
> > > + port_id, xstats_names, cnt_xstats)) {
> > > + fprintf(stderr, "Error: Cannot get xstats lookup\n");
> > > + free(xstats_names);
> > > + return;
> > > + }
> > > +
> > > + /* Get stats themselves */
> > > + xstats = malloc(sizeof(struct rte_eth_xstat) * cnt_xstats);
> > > + if (xstats == NULL) {
> > > + fprintf(stderr, "Cannot allocate memory for xstats\n");
> > > + free(xstats_names);
> > > + return;
> > > + }
> > > + if (cnt_xstats != rte_eth_xstats_get(port_id, xstats, cnt_xstats)) {
> > > + fprintf(stderr, "Error: Unable to get xstats\n");
> > > + free(xstats_names);
> > > + free(xstats);
> > > + return;
> > > + }
> > > +
> > > + /* Display xstats */
> > > + for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++) {
> > > + printf("%s: %"PRIu64"\n",
> > > + xstats_names[idx_xstat].name,
> > > + xstats[idx_xstat].value);
> > > + }
> > > + free(xstats_names);
> > > + free(xstats);
> > > +}
> > > +
> > > /* Send burst of packets on an output interface */ static inline int
> > > send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port) diff
> > > --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c index
> > > 4ac1925c84..9e27e954b9 100644
> > > --- a/examples/l3fwd/l3fwd_lpm.c
> > > +++ b/examples/l3fwd/l3fwd_lpm.c
> > > @@ -41,6 +41,8 @@
> > > static struct rte_lpm *ipv4_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> > > static struct rte_lpm6 *ipv6_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> > >
> > > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > > +
> > > /* Performing LPM-based lookups. 8< */ static inline uint16_t
> > > lpm_get_ipv4_dst_port(const struct rte_ipv4_hdr *ipv4_hdr, @@ -153,6
> > > +155,7 @@ lpm_main_loop(__rte_unused void *dummy)
> > > struct lcore_conf *qconf;
> > > const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
> > > US_PER_S * BURST_TX_DRAIN_US;
> > > + bool start_count = 0;
> > >
> > > lcore_id = rte_lcore_id();
> > > qconf = &lcore_conf[lcore_id]; @@ -207,8 +210,22 @@
> > > lpm_main_loop(__rte_unused void *dummy)
> > > queueid = qconf->rx_queue_list[i].queue_id;
> > > nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> > > MAX_PKT_BURST);
> > > - if (nb_rx == 0)
> > > - continue;
> > > + if (start_count == 0) {
> > > + if (nb_rx != 0)
> > > + start_count = 1;
> > > + }
> > > +
> > > + if (start_count == 1) {
> > > + stats[lcore_id].nb_rx_pkts[i] += nb_rx;
> > > + stats[lcore_id].num_loop[i]++;
> > > + if (nb_rx < MAX_PKT_BURST && nb_rx > 0)
> > > +
> > > + stats[lcore_id].no_full_loop[i]++;
> > > +
> > > + if (nb_rx == 0) {
> > > + stats[lcore_id].none_loop[i]++;
> > > + continue;
> > > + }
> > > + }
> > >
> > > #if defined RTE_ARCH_X86 || defined __ARM_NEON \
> > > || defined RTE_ARCH_PPC_64 @@ -223,6 +240,11
> > > @@ lpm_main_loop(__rte_unused void *dummy)
> > > cur_tsc = rte_rdtsc();
> > > }
> > >
> > > + for (i = 0; i < n_rx_q; ++i) {
> > > + stats[lcore_id].none_loop_per[i] =
> > (float)stats[lcore_id].none_loop[i]/stats[lcore_id].num_loop[i]*100;
> > > + stats[lcore_id].no_full_loop_per[i] =
> > (float)stats[lcore_id].no_full_loop[i]/stats[lcore_id].num_loop[i]*100;
> > > + }
> > > +
> > > return 0;
> > > }
> > >
> > > diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c index
> > > a4f061537e..4727215eae 100644
> > > --- a/examples/l3fwd/main.c
> > > +++ b/examples/l3fwd/main.c
> > > @@ -53,6 +53,8 @@
> > >
> > > #define MAX_LCORE_PARAMS 1024
> > >
> > > +struct lcore_stats stats[RTE_MAX_LCORE];
> > > +
> > > uint16_t nb_rxd = RX_DESC_DEFAULT;
> > > uint16_t nb_txd = TX_DESC_DEFAULT;
> > >
> > > @@ -1592,6 +1594,26 @@ main(int argc, char **argv)
> > > } else {
> > > rte_eal_mp_wait_lcore();
> > >
> > > + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> > > + if (rte_lcore_is_enabled(lcore_id) == 0)
> > > + continue;
> > > + qconf = &lcore_conf[lcore_id];
> > > + for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
> > > + printf("\nlcore id:%d\n", lcore_id);
> > > + printf("queue_id:%d\n",queue);
> > > + printf("Rx pkt %d\n", stats[lcore_id].nb_rx_pkts[queue]);
> > > + printf("loop number: %d, 0 pkts loop:%d, <32 pkts
> > loop:%d\n",
> > > + stats[lcore_id].num_loop[queue],
> > stats[lcore_id].none_loop[queue], stats[lcore_id].no_full_loop[queue]);
> > > + printf("0 pkts loop percentage:%.2f%%, <32 pkts loop
> > percentage:%.2f%%\n",
> > > + stats[lcore_id].none_loop_per[queue],
> > stats[lcore_id].no_full_loop_per[queue]);
> > > +
> > > + printf("------------------------------------\n\n");
> > > +
> > > + }
> > > + }
> > > +
> > > + nic_xstats_display(0);
> > > + nic_xstats_display(1);
> > > +
> > > RTE_ETH_FOREACH_DEV(portid) {
> > > if ((enabled_port_mask & (1 << portid)) == 0)
> > > continue;
> > > --
> > > 2.25.1
> > >
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters
2023-05-12 12:02 ` Jerin Jacob
@ 2023-05-15 22:50 ` Honnappa Nagarahalli
0 siblings, 0 replies; 9+ messages in thread
From: Honnappa Nagarahalli @ 2023-05-15 22:50 UTC (permalink / raw)
To: Jerin Jacob; +Cc: Feifei Wang, dev, nd, Lijian Zhang, Ruifeng Wang, nd
<snip>
> >
> > >
> > > On Thu, May 11, 2023 at 1:55 PM Feifei Wang <feifei.wang2@arm.com>
> > > wrote:
> > > >
> > > > This patch is to collect empty poll of 'rte_eth_rx_burst'
> > > > functions in dpdk l3fwd application. Empty poll means Rx burst
> > > > function receives no pkts in one loop.
> > > >
> > > > Furthermore, we also add 'nic_xstats_display' API to show NIC counters.
> > > >
> > > > Usage:
> > > > With this patch, no special settings, just run l3fwd, and when you
> > > > stoping l3fwd, thread will print the info above.
> > > >
> > > > Note:
> > > > This patch has just a slight impact on performance and can be ignored.
> > How much is the regression?
> >
> > >
> > > IMO, We should not introduce regression as l3fwd kind of uses as
> > > reference application.
> > > I think, l3fwd should limit to stats exposed by ethdev(i.e directly
> > > from NIC, without performance regression).
> > Agree L3fwd is the reference app. Unfortunately, it is not in a state to debug
> any problems. May be many are just believing the numbers without
> understanding that there are problems.
> > Can we place these stats under a run time flag and reduce the impact
> further?
>
> I think, example applications, we can have compile time option for new
> feature addtions in fastpath or add new forwarding mode in testpmd.
New forwarding (L3fwd in this case) mode for testpmd was rejected overwhelmingly. So, that's not an option.
I thought compile time options are discouraged as well. But, I am fine with the compile time approach to get some debugging capabilities in this application.
May be we could understand the performance difference with run time flag?
>
> >
> > >
> > >
> > >
> > > >
> > > > dpdk version:23.03
> > > >
> > > > Suggested-by: Lijian Zhang <lijian.zhang@arm.com>
> > > > Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
> > > > Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > > > Reviewed-by: Honnappa Nagarahalli
> <honnappa.nagarahalli@arm.com>
> > > > ---
> > > > examples/l3fwd/l3fwd.h | 68
> > > ++++++++++++++++++++++++++++++++++++++
> > > > examples/l3fwd/l3fwd_lpm.c | 26 +++++++++++++--
> > > > examples/l3fwd/main.c | 22 ++++++++++++
> > > > 3 files changed, 114 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h index
> > > > b55855c932..2b3fca62f3 100644
> > > > --- a/examples/l3fwd/l3fwd.h
> > > > +++ b/examples/l3fwd/l3fwd.h
> > > > @@ -56,6 +56,17 @@
> > > > #define L3FWD_HASH_ENTRIES (1024*1024*1)
> > > > #endif
> > > >
> > > > +struct lcore_stats {
> > > > + uint32_t nb_rx_pkts[16];
> > > > + uint32_t num_loop[16];
> > > > + uint32_t none_loop[16];
> > > > + uint32_t no_full_loop[16];
> > > > + float none_loop_per[16];
> > > > + float no_full_loop_per[16];
> > > > +} __rte_cache_aligned;
> > > > +
> > > > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > > > +
> > > > struct parm_cfg {
> > > > const char *rule_ipv4_name;
> > > > const char *rule_ipv6_name; @@ -115,6 +126,63 @@ extern
> > > > struct acl_algorithms acl_alg[];
> > > >
> > > > extern uint32_t max_pkt_len;
> > > >
> > > > +static inline void
> > > > +nic_xstats_display(uint32_t port_id) {
> > > > + struct rte_eth_xstat *xstats;
> > > > + int cnt_xstats, idx_xstat;
> > > > + struct rte_eth_xstat_name *xstats_names;
> > > > +
> > > > + printf("###### NIC extended statistics for port %-2d\n", port_id);
> > > > + if (!rte_eth_dev_is_valid_port(port_id)) {
> > > > + fprintf(stderr, "Error: Invalid port number %i\n", port_id);
> > > > + return;
> > > > + }
> > > > +
> > > > + /* Get count */
> > > > + cnt_xstats = rte_eth_xstats_get_names(port_id, NULL, 0);
> > > > + if (cnt_xstats < 0) {
> > > > + fprintf(stderr, "Error: Cannot get count of xstats\n");
> > > > + return;
> > > > + }
> > > > +
> > > > + /* Get id-name lookup table */
> > > > + xstats_names = malloc(sizeof(struct rte_eth_xstat_name) *
> cnt_xstats);
> > > > + if (xstats_names == NULL) {
> > > > + fprintf(stderr, "Cannot allocate memory for xstats lookup\n");
> > > > + return;
> > > > + }
> > > > + if (cnt_xstats != rte_eth_xstats_get_names(
> > > > + port_id, xstats_names, cnt_xstats)) {
> > > > + fprintf(stderr, "Error: Cannot get xstats lookup\n");
> > > > + free(xstats_names);
> > > > + return;
> > > > + }
> > > > +
> > > > + /* Get stats themselves */
> > > > + xstats = malloc(sizeof(struct rte_eth_xstat) * cnt_xstats);
> > > > + if (xstats == NULL) {
> > > > + fprintf(stderr, "Cannot allocate memory for xstats\n");
> > > > + free(xstats_names);
> > > > + return;
> > > > + }
> > > > + if (cnt_xstats != rte_eth_xstats_get(port_id, xstats, cnt_xstats)) {
> > > > + fprintf(stderr, "Error: Unable to get xstats\n");
> > > > + free(xstats_names);
> > > > + free(xstats);
> > > > + return;
> > > > + }
> > > > +
> > > > + /* Display xstats */
> > > > + for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++) {
> > > > + printf("%s: %"PRIu64"\n",
> > > > + xstats_names[idx_xstat].name,
> > > > + xstats[idx_xstat].value);
> > > > + }
> > > > + free(xstats_names);
> > > > + free(xstats);
> > > > +}
> > > > +
> > > > /* Send burst of packets on an output interface */ static inline
> > > > int send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t
> > > > port) diff --git a/examples/l3fwd/l3fwd_lpm.c
> > > > b/examples/l3fwd/l3fwd_lpm.c index
> > > > 4ac1925c84..9e27e954b9 100644
> > > > --- a/examples/l3fwd/l3fwd_lpm.c
> > > > +++ b/examples/l3fwd/l3fwd_lpm.c
> > > > @@ -41,6 +41,8 @@
> > > > static struct rte_lpm *ipv4_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> > > > static struct rte_lpm6 *ipv6_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> > > >
> > > > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > > > +
> > > > /* Performing LPM-based lookups. 8< */ static inline uint16_t
> > > > lpm_get_ipv4_dst_port(const struct rte_ipv4_hdr *ipv4_hdr, @@
> > > > -153,6
> > > > +155,7 @@ lpm_main_loop(__rte_unused void *dummy)
> > > > struct lcore_conf *qconf;
> > > > const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
> > > > US_PER_S * BURST_TX_DRAIN_US;
> > > > + bool start_count = 0;
> > > >
> > > > lcore_id = rte_lcore_id();
> > > > qconf = &lcore_conf[lcore_id]; @@ -207,8 +210,22 @@
> > > > lpm_main_loop(__rte_unused void *dummy)
> > > > queueid = qconf->rx_queue_list[i].queue_id;
> > > > nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> > > > MAX_PKT_BURST);
> > > > - if (nb_rx == 0)
> > > > - continue;
> > > > + if (start_count == 0) {
> > > > + if (nb_rx != 0)
> > > > + start_count = 1;
> > > > + }
> > > > +
> > > > + if (start_count == 1) {
> > > > + stats[lcore_id].nb_rx_pkts[i] += nb_rx;
> > > > + stats[lcore_id].num_loop[i]++;
> > > > + if (nb_rx < MAX_PKT_BURST && nb_rx
> > > > + > 0)
> > > > +
> > > > + stats[lcore_id].no_full_loop[i]++;
> > > > +
> > > > + if (nb_rx == 0) {
> > > > + stats[lcore_id].none_loop[i]++;
> > > > + continue;
> > > > + }
> > > > + }
> > > >
> > > > #if defined RTE_ARCH_X86 || defined __ARM_NEON \
> > > > || defined RTE_ARCH_PPC_64 @@ -223,6
> > > > +240,11 @@ lpm_main_loop(__rte_unused void *dummy)
> > > > cur_tsc = rte_rdtsc();
> > > > }
> > > >
> > > > + for (i = 0; i < n_rx_q; ++i) {
> > > > + stats[lcore_id].none_loop_per[i] =
> > > (float)stats[lcore_id].none_loop[i]/stats[lcore_id].num_loop[i]*100;
> > > > + stats[lcore_id].no_full_loop_per[i] =
> > > (float)stats[lcore_id].no_full_loop[i]/stats[lcore_id].num_loop[i]*1
> > > 00;
> > > > + }
> > > > +
> > > > return 0;
> > > > }
> > > >
> > > > diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c index
> > > > a4f061537e..4727215eae 100644
> > > > --- a/examples/l3fwd/main.c
> > > > +++ b/examples/l3fwd/main.c
> > > > @@ -53,6 +53,8 @@
> > > >
> > > > #define MAX_LCORE_PARAMS 1024
> > > >
> > > > +struct lcore_stats stats[RTE_MAX_LCORE];
> > > > +
> > > > uint16_t nb_rxd = RX_DESC_DEFAULT; uint16_t nb_txd =
> > > > TX_DESC_DEFAULT;
> > > >
> > > > @@ -1592,6 +1594,26 @@ main(int argc, char **argv)
> > > > } else {
> > > > rte_eal_mp_wait_lcore();
> > > >
> > > > + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> > > > + if (rte_lcore_is_enabled(lcore_id) == 0)
> > > > + continue;
> > > > + qconf = &lcore_conf[lcore_id];
> > > > + for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
> > > > + printf("\nlcore id:%d\n", lcore_id);
> > > > + printf("queue_id:%d\n",queue);
> > > > + printf("Rx pkt %d\n",
> stats[lcore_id].nb_rx_pkts[queue]);
> > > > + printf("loop number: %d, 0 pkts
> > > > + loop:%d, <32 pkts
> > > loop:%d\n",
> > > > +
> > > > + stats[lcore_id].num_loop[queue],
> > > stats[lcore_id].none_loop[queue],
> > > stats[lcore_id].no_full_loop[queue]);
> > > > + printf("0 pkts loop
> > > > + percentage:%.2f%%, <32 pkts loop
> > > percentage:%.2f%%\n",
> > > > +
> > > > + stats[lcore_id].none_loop_per[queue],
> > > stats[lcore_id].no_full_loop_per[queue]);
> > > > +
> > > > + printf("------------------------------------\n\n");
> > > > +
> > > > + }
> > > > + }
> > > > +
> > > > + nic_xstats_display(0);
> > > > + nic_xstats_display(1);
> > > > +
> > > > RTE_ETH_FOREACH_DEV(portid) {
> > > > if ((enabled_port_mask & (1 << portid)) == 0)
> > > > continue;
> > > > --
> > > > 2.25.1
> > > >
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters
2023-05-11 15:44 ` Stephen Hemminger
@ 2023-05-16 6:19 ` Feifei Wang
0 siblings, 0 replies; 9+ messages in thread
From: Feifei Wang @ 2023-05-16 6:19 UTC (permalink / raw)
To: Stephen Hemminger
Cc: dev, nd, Lijian Zhang, Ruifeng Wang, Honnappa Nagarahalli, nd
Thanks for the comment.
> -----Original Message-----
> From: Stephen Hemminger <stephen@networkplumber.org>
> Sent: Thursday, May 11, 2023 11:45 PM
> To: Feifei Wang <Feifei.Wang2@arm.com>
> Cc: dev@dpdk.org; nd <nd@arm.com>; Lijian Zhang
> <Lijian.Zhang@arm.com>; Ruifeng Wang <Ruifeng.Wang@arm.com>;
> Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
> Subject: Re: [PATCH] examples/l3fwd: add hard code to collect empty poll and
> NIC counters
>
> On Thu, 11 May 2023 16:25:19 +0800
> Feifei Wang <feifei.wang2@arm.com> wrote:
>
> > This patch is to collect empty poll of 'rte_eth_rx_burst' functions in
> > dpdk l3fwd application. Empty poll means Rx burst function receives no
> > pkts in one loop.
> >
> > Furthermore, we also add 'nic_xstats_display' API to show NIC counters.
> >
> > Usage:
> > With this patch, no special settings, just run l3fwd, and when you
> > stoping l3fwd, thread will print the info above.
> >
> > Note:
> > This patch has just a slight impact on performance and can be ignored.
>
> There was a set of other patches around telemetry.
> Shouldn't this example use some of that rather than "roll your own"?
But for 'empty poll', it seems have no API to collect this.
By the way, would you please share the API or patch which can do like this?
Thanks very much.
>
> >
> > dpdk version:23.03
> >
> > Suggested-by: Lijian Zhang <lijian.zhang@arm.com>
> > Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
> > Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> > ---
> > examples/l3fwd/l3fwd.h | 68
> ++++++++++++++++++++++++++++++++++++++
> > examples/l3fwd/l3fwd_lpm.c | 26 +++++++++++++--
> > examples/l3fwd/main.c | 22 ++++++++++++
> > 3 files changed, 114 insertions(+), 2 deletions(-)
> >
> > diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h index
> > b55855c932..2b3fca62f3 100644
> > --- a/examples/l3fwd/l3fwd.h
> > +++ b/examples/l3fwd/l3fwd.h
> > @@ -56,6 +56,17 @@
> > #define L3FWD_HASH_ENTRIES (1024*1024*1)
> > #endif
> >
> > +struct lcore_stats {
> > + uint32_t nb_rx_pkts[16];
> > + uint32_t num_loop[16];
> > + uint32_t none_loop[16];
> > + uint32_t no_full_loop[16];
> > + float none_loop_per[16];
> > + float no_full_loop_per[16];
> > +} __rte_cache_aligned;
>
> What is the 16 magic value?
I think here should be use MAX_RX_QUEUE_PER_LCORE to replace 16.
>
> Use double instead of float to keep more accuracy?
Agree.
>
> There maybe holes in this structure?
>
> You may want to allocate it at runtime based on number of actual cores and
> get it on the right NUMA node.
Ok. So maybe each lcore is responsible to define this struct for itself?
>
> > +
> > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > +
> > struct parm_cfg {
> > const char *rule_ipv4_name;
> > const char *rule_ipv6_name;
> > @@ -115,6 +126,63 @@ extern struct acl_algorithms acl_alg[];
> >
> > extern uint32_t max_pkt_len;
> >
> > +static inline void
> > +nic_xstats_display(uint32_t port_id)
> > +{
> > + struct rte_eth_xstat *xstats;
> > + int cnt_xstats, idx_xstat;
> > + struct rte_eth_xstat_name *xstats_names;
> > +
> > + printf("###### NIC extended statistics for port %-2d\n", port_id);
> > + if (!rte_eth_dev_is_valid_port(port_id)) {
> > + fprintf(stderr, "Error: Invalid port number %i\n", port_id);
> > + return;
> > + }
> > +
> > + /* Get count */
> > + cnt_xstats = rte_eth_xstats_get_names(port_id, NULL, 0);
> > + if (cnt_xstats < 0) {
> > + fprintf(stderr, "Error: Cannot get count of xstats\n");
> > + return;
> > + }
> > +
> > + /* Get id-name lookup table */
> > + xstats_names = malloc(sizeof(struct rte_eth_xstat_name) * cnt_xstats);
> > + if (xstats_names == NULL) {
> > + fprintf(stderr, "Cannot allocate memory for xstats lookup\n");
> > + return;
> > + }
> > + if (cnt_xstats != rte_eth_xstats_get_names(
> > + port_id, xstats_names, cnt_xstats)) {
> > + fprintf(stderr, "Error: Cannot get xstats lookup\n");
> > + free(xstats_names);
> > + return;
> > + }
> > +
> > + /* Get stats themselves */
> > + xstats = malloc(sizeof(struct rte_eth_xstat) * cnt_xstats);
> > + if (xstats == NULL) {
> > + fprintf(stderr, "Cannot allocate memory for xstats\n");
> > + free(xstats_names);
> > + return;
> > + }
> > + if (cnt_xstats != rte_eth_xstats_get(port_id, xstats, cnt_xstats)) {
> > + fprintf(stderr, "Error: Unable to get xstats\n");
> > + free(xstats_names);
> > + free(xstats);
> > + return;
> > + }
> > +
> > + /* Display xstats */
> > + for (idx_xstat = 0; idx_xstat < cnt_xstats; idx_xstat++) {
> > + printf("%s: %"PRIu64"\n",
> > + xstats_names[idx_xstat].name,
> > + xstats[idx_xstat].value);
> > + }
> > + free(xstats_names);
> > + free(xstats);
> > +}
> > +
> > /* Send burst of packets on an output interface */ static inline int
> > send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port) diff
> > --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c index
> > 4ac1925c84..9e27e954b9 100644
> > --- a/examples/l3fwd/l3fwd_lpm.c
> > +++ b/examples/l3fwd/l3fwd_lpm.c
> > @@ -41,6 +41,8 @@
> > static struct rte_lpm *ipv4_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> > static struct rte_lpm6 *ipv6_l3fwd_lpm_lookup_struct[NB_SOCKETS];
> >
> > +extern struct lcore_stats stats[RTE_MAX_LCORE];
> > +
> > /* Performing LPM-based lookups. 8< */ static inline uint16_t
> > lpm_get_ipv4_dst_port(const struct rte_ipv4_hdr *ipv4_hdr, @@ -153,6
> > +155,7 @@ lpm_main_loop(__rte_unused void *dummy)
> > struct lcore_conf *qconf;
> > const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
> > US_PER_S * BURST_TX_DRAIN_US;
> > + bool start_count = 0;
> >
> > lcore_id = rte_lcore_id();
> > qconf = &lcore_conf[lcore_id];
> > @@ -207,8 +210,22 @@ lpm_main_loop(__rte_unused void *dummy)
> > queueid = qconf->rx_queue_list[i].queue_id;
> > nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> > MAX_PKT_BURST);
> > - if (nb_rx == 0)
> > - continue;
> > + if (start_count == 0) {
> > + if (nb_rx != 0)
> > + start_count = 1;
> > + }
> > +
> > + if (start_count == 1) {
> > + stats[lcore_id].nb_rx_pkts[i] += nb_rx;
> > + stats[lcore_id].num_loop[i]++;
> > + if (nb_rx < MAX_PKT_BURST && nb_rx > 0)
> > + stats[lcore_id].no_full_loop[i]++;
> > +
> > + if (nb_rx == 0) {
> > + stats[lcore_id].none_loop[i]++;
> > + continue;
> > + }
> > + }
>
> On Arm you are going to need to use a barrier or atomic variable for these
> otherwise, there is no guarantee that other thread will read the right value.
For the change in l3fwd,
'Counters++' is in data path, and each lcore only changes itself counters.
After all thread exits, the main thread will load all counters in control path.
If add barrier in data path, performance will drop and the counters will lost
their authenticity.
>
> >
> > #if defined RTE_ARCH_X86 || defined __ARM_NEON \
> > || defined RTE_ARCH_PPC_64
> > @@ -223,6 +240,11 @@ lpm_main_loop(__rte_unused void *dummy)
> > cur_tsc = rte_rdtsc();
> > }
> >
> > + for (i = 0; i < n_rx_q; ++i) {
> > + stats[lcore_id].none_loop_per[i] =
> (float)stats[lcore_id].none_loop[i]/stats[lcore_id].num_loop[i]*100;
> > + stats[lcore_id].no_full_loop_per[i] =
> (float)stats[lcore_id].no_full_loop[i]/stats[lcore_id].num_loop[i]*100;
> > + }
> > +
> > return 0;
> > }
> >
> > diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c index
> > a4f061537e..4727215eae 100644
> > --- a/examples/l3fwd/main.c
> > +++ b/examples/l3fwd/main.c
> > @@ -53,6 +53,8 @@
> >
> > #define MAX_LCORE_PARAMS 1024
> >
> > +struct lcore_stats stats[RTE_MAX_LCORE];
> > +
> > uint16_t nb_rxd = RX_DESC_DEFAULT;
> > uint16_t nb_txd = TX_DESC_DEFAULT;
> >
> > @@ -1592,6 +1594,26 @@ main(int argc, char **argv)
> > } else {
> > rte_eal_mp_wait_lcore();
> >
> > + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> > + if (rte_lcore_is_enabled(lcore_id) == 0)
> > + continue;
> > + qconf = &lcore_conf[lcore_id];
> > + for (queue = 0; queue < qconf->n_rx_queue; ++queue)
> {
> > + printf("\nlcore id:%d\n", lcore_id);
> > + printf("queue_id:%d\n",queue);
> > + printf("Rx pkt %d\n",
> stats[lcore_id].nb_rx_pkts[queue]);
> > + printf("loop number: %d, 0 pkts loop:%d, <32
> pkts loop:%d\n",
> > + stats[lcore_id].num_loop[queue],
> stats[lcore_id].none_loop[queue], stats[lcore_id].no_full_loop[queue]);
> > + printf("0 pkts loop percentage:%.2f%%, <32
> pkts loop percentage:%.2f%%\n",
> > +
> stats[lcore_id].none_loop_per[queue],
> stats[lcore_id].no_full_loop_per[queue]);
> > + printf("------------------------------------\n\n");
> > +
> > + }
> > + }
> > +
> > + nic_xstats_display(0);
> > + nic_xstats_display(1);
> > +
> > RTE_ETH_FOREACH_DEV(portid) {
> > if ((enabled_port_mask & (1 << portid)) == 0)
> > continue;
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2023-05-16 6:19 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-11 8:25 [PATCH] examples/l3fwd: add hard code to collect empty poll and NIC counters Feifei Wang
2023-05-11 8:51 ` Jerin Jacob
2023-05-11 8:57 ` Feifei Wang
2023-05-11 13:32 ` Honnappa Nagarahalli
2023-05-12 1:52 ` Feifei Wang
2023-05-12 12:02 ` Jerin Jacob
2023-05-15 22:50 ` Honnappa Nagarahalli
2023-05-11 15:44 ` Stephen Hemminger
2023-05-16 6:19 ` Feifei Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).