From: Hernan Vargas <hernan.vargas@intel.com>
To: dev@dpdk.org, maxime.coquelin@redhat.com, gakhil@marvell.com,
trix@redhat.com
Cc: nicolas.chautru@intel.com, qi.z.zhang@intel.com,
Hernan Vargas <hernan.vargas@intel.com>
Subject: [PATCH v1 5/6] baseband/fpga_5gnr_fec: add AGX100 support
Date: Tue, 23 May 2023 11:48:17 -0700 [thread overview]
Message-ID: <20230523184818.139353-6-hernan.vargas@intel.com> (raw)
In-Reply-To: <20230523184818.139353-1-hernan.vargas@intel.com>
Add support for new FPGA variant AGX100 (on Arrow Creek N6000).
Signed-off-by: Hernan Vargas <hernan.vargas@intel.com>
---
doc/guides/bbdevs/fpga_5gnr_fec.rst | 72 +-
drivers/baseband/fpga_5gnr_fec/agx100_pmd.h | 273 ++++
.../baseband/fpga_5gnr_fec/fpga_5gnr_fec.h | 6 +
.../fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 1197 +++++++++++++++--
4 files changed, 1395 insertions(+), 153 deletions(-)
create mode 100644 drivers/baseband/fpga_5gnr_fec/agx100_pmd.h
diff --git a/doc/guides/bbdevs/fpga_5gnr_fec.rst b/doc/guides/bbdevs/fpga_5gnr_fec.rst
index 9d71585e9e18..c27db695a834 100644
--- a/doc/guides/bbdevs/fpga_5gnr_fec.rst
+++ b/doc/guides/bbdevs/fpga_5gnr_fec.rst
@@ -6,12 +6,13 @@ Intel(R) FPGA 5GNR FEC Poll Mode Driver
The BBDEV FPGA 5GNR FEC poll mode driver (PMD) supports an FPGA implementation of a VRAN
LDPC Encode / Decode 5GNR wireless acceleration function, using Intel's PCI-e and FPGA
-based Vista Creek device.
+based Vista Creek (N3000, referred to as VC_5GNR in the code) as well as Arrow Creek (N6000,
+referred to as AGX100 in the code).
Features
--------
-FPGA 5GNR FEC PMD supports the following features:
+FPGA 5GNR FEC PMD supports the following BBDEV capabilities:
- LDPC Encode in the DL
- LDPC Decode in the UL
@@ -67,10 +68,18 @@ Initialization
When the device first powers up, its PCI Physical Functions (PF) can be listed through this command:
+Vista Creek (N3000)
+
.. code-block:: console
sudo lspci -vd8086:0d8f
+Arrow Creek (N6000)
+
+.. code-block:: console
+
+ sudo lspci -vd8086:5799
+
The physical and virtual functions are compatible with Linux UIO drivers:
``vfio`` and ``igb_uio``. However, in order to work the FPGA 5GNR FEC device firstly needs
to be bound to one of these linux drivers through DPDK.
@@ -85,24 +94,34 @@ Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
The igb_uio driver may be bound to the PF PCI device using one of two methods:
-1. PCI functions (physical or virtual, depending on the use case) can be bound to
-the UIO driver by repeating this command for every function.
+1. PCI functions (physical or virtual, depending on the use case) can be bound to the UIO driver by repeating this command for every function.
-.. code-block:: console
+ .. code-block:: console
+
+ insmod igb_uio.ko
+
+ Bind N3000 to igb_uio
+
+ .. code-block:: console
- insmod igb_uio.ko
- echo "8086 0d8f" > /sys/bus/pci/drivers/igb_uio/new_id
- lspci -vd8086:0d8f
+ echo "8086 0d8f" > /sys/bus/pci/drivers/igb_uio/new_id
+ lspci -vd8086:0d8f
+ Bind N6000 to igb_uio
+
+ .. code-block:: console
+
+ echo "8086 5799" > /sys/bus/pci/drivers/igb_uio/new_id
+ lspci -vd8086:5799
2. Another way to bind PF with DPDK UIO driver is by using the ``dpdk-devbind.py`` tool
-.. code-block:: console
+ .. code-block:: console
- cd <dpdk-top-level-directory>
- ./usertools/dpdk-devbind.py -b igb_uio 0000:06:00.0
+ cd <dpdk-top-level-directory>
+ ./usertools/dpdk-devbind.py -b igb_uio 0000:06:00.0
-where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd8086:0d8f
+where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd8086:0d8f for N3000 or lspci -vd8086:5799 for N6000
In the same way the FPGA 5GNR FEC PF can be bound with vfio, but vfio driver does not
@@ -165,7 +184,6 @@ parameters defined in ``rte_fpga_5gnr_fec_conf`` structure:
uint8_t dl_bandwidth;
uint8_t ul_load_balance;
uint8_t dl_load_balance;
- uint16_t flr_time_out;
};
- ``pf_mode_en``: identifies whether only PF is to be used, or the VFs. PF and
@@ -176,12 +194,12 @@ parameters defined in ``rte_fpga_5gnr_fec_conf`` structure:
- ``vf_*l_queues_number``: defines the hardware queue mapping for every VF.
-- ``*l_bandwidth``: in case of congestion on PCIe interface. The device
- allocates different bandwidth to UL and DL. The weight is configured by this
- setting. The unit of weight is 3 code blocks. For example, if the code block
- cbps (code block per second) ratio between UL and DL is 12:1, then the
- configuration value should be set to 36:3. The schedule algorithm is based
- on code block regardless the length of each block.
+- ``*l_bandwidth``: Only used for the Vista Creek schedule algorithm in case of
+ congestion on PCIe interface. The device allocates different bandwidth to UL
+ and DL. The weight is configured by this setting. The unit of weight is 3 code
+ blocks. For example, if the code block cbps (code block per second) ratio between
+ UL and DL is 12:1, then the configuration value should be set to 36:3.
+ The schedule algorithm is based on code block regardless the length of each block.
- ``*l_load_balance``: hardware queues are load-balanced in a round-robin
fashion. Queues get filled first-in first-out until they reach a pre-defined
@@ -191,10 +209,6 @@ parameters defined in ``rte_fpga_5gnr_fec_conf`` structure:
If all hardware queues exceeds the watermark, no code blocks will be
streamed in from UL/DL code block FIFO.
-- ``flr_time_out``: specifies how many 16.384us to be FLR time out. The
- time_out = flr_time_out x 16.384us. For instance, if you want to set 10ms for
- the FLR time out then set this setting to 0x262=610.
-
An example configuration code calling the function ``rte_fpga_5gnr_fec_configure()`` is shown
below:
@@ -219,7 +233,7 @@ below:
/* setup FPGA PF */
ret = rte_fpga_5gnr_fec_configure(info->dev_name, &conf);
TEST_ASSERT_SUCCESS(ret,
- "Failed to configure 4G FPGA PF for bbdev %s",
+ "Failed to configure 5GNR FPGA PF for bbdev %s",
info->dev_name);
@@ -263,7 +277,6 @@ are defined in test_bbdev_perf.c as:
- DL_BANDWIDTH 3
- UL_LOAD_BALANCE 128
- DL_LOAD_BALANCE 128
-- FLR_TIMEOUT 610
Test Vectors
@@ -287,7 +300,16 @@ See for more details: https://github.com/intel/pf-bb-config
Specifically for the BBDEV FPGA 5GNR FEC PMD, the command below can be used:
+Vista Creek (N3000)
+
.. code-block:: console
./pf_bb_config FPGA_5GNR -c fpga_5gnr/fpga_5gnr_config_vf.cfg
./test-bbdev.py -e="-c 0xff0 -a${VF_PCI_ADDR}" -c validation -n 64 -b 32 -l 1 -v ./ldpc_dec_default.data
+
+Arrow Creek (N6000)
+
+.. code-block:: console
+
+ ./pf_bb_config AGX100 -c agx100/agx100_config_1vf.cfg
+ ./test-bbdev.py -e="-c 0xff0 -a${VF_PCI_ADDR}" -c validation -n 64 -b 32 -l 1 -v ./ldpc_dec_default.data
diff --git a/drivers/baseband/fpga_5gnr_fec/agx100_pmd.h b/drivers/baseband/fpga_5gnr_fec/agx100_pmd.h
new file mode 100644
index 000000000000..8013571402c8
--- /dev/null
+++ b/drivers/baseband/fpga_5gnr_fec/agx100_pmd.h
@@ -0,0 +1,273 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Intel Corporation
+ */
+
+#ifndef _AGX100_H_
+#define _AGX100_H_
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/* AGX100 PCI vendor & device IDs. */
+#define AGX100_VENDOR_ID (0x8086)
+#define AGX100_PF_DEVICE_ID (0x5799)
+#define AGX100_VF_DEVICE_ID (0x579A)
+
+/* Maximum number of possible queues supported on device. */
+#define AGX100_MAXIMUM_QUEUES_SUPPORTED (64)
+
+/* AGX100 Ring size is in 256 bits (64 bytes) units. */
+#define AGX100_RING_DESC_LEN_UNIT_BYTES (64)
+
+/* Align DMA descriptors to 256 bytes - cache-aligned. */
+#define AGX100_RING_DESC_ENTRY_LENGTH (8)
+
+/* AGX100 Register mapping on BAR0. */
+enum {
+ AGX100_FLR_TIME_OUT = 0x0000000E, /* len: 2B. */
+ AGX100_QUEUE_MAP = 0x00000100 /* len: 256B. */
+};
+
+/* AGX100 DESCRIPTOR ERROR. */
+enum {
+ AGX100_DESC_ERR_NO_ERR = 0x00, /**< 4'b0000 2'b00. */
+ AGX100_DESC_ERR_E_NOT_LEGAL = 0x11, /**< 4'b0001 2'b01. */
+ AGX100_DESC_ERR_K_P_OUT_OF_RANGE = 0x21, /**< 4'b0010 2'b01. */
+ AGX100_DESC_ERR_NCB_OUT_OF_RANGE = 0x31, /**< 4'b0011 2'b01. */
+ AGX100_DESC_ERR_Z_C_NOT_LEGAL = 0x41, /**< 4'b0100 2'b01. */
+ AGX100_DESC_ERR_DESC_INDEX_ERR = 0x03, /**< 4'b0000 2'b11. */
+ AGX100_DESC_ERR_HARQ_INPUT_LEN_A = 0x51, /**< 4'b0101 2'b01. */
+ AGX100_DESC_ERR_HARQ_INPUT_LEN_B = 0x61, /**< 4'b0110 2'b01. */
+ AGX100_DESC_ERR_HBSTORE_OFFSET_ERR = 0x71, /**< 4'b0111 2'b01. */
+ AGX100_DESC_ERR_TB_CBG_ERR = 0x81, /**< 4'b1000 2'b01. */
+ AGX100_DESC_ERR_CBG_OUT_OF_RANGE = 0x91, /**< 4'b1001 2'b01. */
+ AGX100_DESC_ERR_CW_RM_NOT_LEGAL = 0xA1, /**< 4'b1010 2'b01. */
+ AGX100_DESC_ERR_UNSUPPORTED_REQ = 0x12, /**< 4'b0000 2'b10. */
+ AGX100_DESC_ERR_RESERVED = 0x22, /**< 4'b0010 2'b10. */
+ AGX100_DESC_ERR_DESC_ABORT = 0x42, /**< 4'b0100 2'b10. */
+ AGX100_DESC_ERR_DESC_READ_TLP_POISONED = 0x82 /**< 4'b1000 2'b10. */
+};
+
+/* AGX100 TX Slice Descriptor. */
+struct __rte_packed agx100_input_slice_desc {
+ uint32_t input_start_addr_lo;
+ uint32_t input_start_addr_hi;
+ uint32_t input_slice_length:21,
+ rsrvd0:9,
+ end_of_pkt:1,
+ start_of_pkt:1;
+ uint32_t input_slice_time_stamp:31,
+ input_c:1;
+};
+
+/* AGX100 RX Slice Descriptor. */
+struct __rte_packed agx100_output_slice_desc {
+ uint32_t output_start_addr_lo;
+ uint32_t output_start_addr_hi;
+ uint32_t output_slice_length:21,
+ rsrvd0:9,
+ end_of_pkt:1,
+ start_of_pkt:1;
+ uint32_t output_slice_time_stamp:31,
+ output_c:1;
+};
+
+/* AGX100 DL DMA Encoding Request Descriptor. */
+struct __rte_packed agx100_dma_enc_desc {
+ uint32_t done:1, /**< 0: not completed 1: completed. */
+ rsrvd0:17,
+ error_msg:2,
+ error_code:4,
+ rsrvd1:8;
+ uint32_t ncb:16, /**< Limited circular buffer size. */
+ bg_idx:1, /**< Base Graph 0: BG1 1: BG2.*/
+ qm_idx:3, /**< 0: BPSK; 1: QPSK; 2: 16QAM; 3: 64QAM; 4: 256QAM. */
+ zc:9, /**< Lifting size. */
+ rv:2, /**< Redundancy version number. */
+ int_en:1; /**< Interrupt enable. */
+ uint32_t max_cbg:4, /**< Only valid when workload is TB or CBGs. */
+ rsrvd2:4,
+ cbgti:8, /**< CBG bitmap. */
+ rsrvd3:4,
+ cbgs:1, /**< 0: TB or CB 1: CBGs. */
+ desc_idx:11; /**< Sequence number of the descriptor. */
+ uint32_t ca:10, /**< Code block number with Ea in TB or CBG. */
+ c:10, /**< Total code block number in TB or CBG. */
+ rsrvd4:2,
+ num_null:10; /**< Number of null bits. */
+ uint32_t ea:21, /**< Value of E when worload is CB. */
+ rsrvd5:11;
+ uint32_t eb:21, /**< Only valid when workload is TB or CBGs. */
+ rsrvd6:11;
+ uint32_t k_:16, /**< Code block length without null bits. */
+ rsrvd7:8,
+ en_slice_ts:1, /**< Enable slice descriptor timestamp. */
+ en_host_ts:1, /**< Enable host descriptor timestamp. */
+ en_cb_wr_status:1, /**< Enable code block write back status. */
+ en_output_sg:1, /**< Enable RX scatter-gather. */
+ en_input_sg:1, /**< Enable TX scatter-gather. */
+ tb_cb:1, /**< 2'b10: the descriptor is for a TrBlk.
+ * 2'b00: the descriptor is for a CBlk.
+ * 2'b11 or 01: the descriptor is for a CBGs.
+ */
+ crc_en:1, /**< 1: CB CRC enabled 0: CB CRC disabled.
+ * Only valid when workload is CB or CBGs.
+ */
+ rsrvd8:1;
+ uint32_t rsrvd9;
+ union {
+ uint32_t input_slice_table_addr_lo; /**<Used when scatter-gather enabled.*/
+ uint32_t input_start_addr_lo; /**< Used when scatter-gather disabled. */
+ };
+ union {
+ uint32_t input_slice_table_addr_hi; /**<Used when scatter-gather enabled.*/
+ uint32_t input_start_addr_hi; /**< Used when scatter-gather disabled. */
+ };
+ union {
+ uint32_t input_slice_num:21, /**< Used when scatter-gather enabled. */
+ rsrvd10:11;
+ uint32_t input_length:26, /**< Used when scatter-gather disabled. */
+ rsrvd11:6;
+ };
+ union {
+ uint32_t output_slice_table_addr_lo; /**< Used when scatter-gather enabled.*/
+ uint32_t output_start_addr_lo; /**< Used when scatter-gather disabled. */
+ };
+ union {
+ uint32_t output_slice_table_addr_hi; /**< Used when scatter-gather enabled.*/
+ uint32_t output_start_addr_hi; /**< Used when scatter-gather disabled. */
+ };
+ union {
+ uint32_t output_slice_num:21, /**< Used when scatter-gather enabled. */
+ rsrvd12:11;
+ uint32_t output_length:26, /**< Used when scatter-gather disabled. */
+ rsrvd13:6;
+ };
+ uint32_t enqueue_timestamp:31, /**< Time when AGX100 receives descriptor. */
+ rsrvd14:1;
+ uint32_t completion_timestamp:31, /**< Time when AGX100 completes descriptor. */
+ rsrvd15:1;
+
+ union {
+ struct {
+ /** Virtual addresses used to retrieve SW context info. */
+ void *op_addr;
+ /** Stores information about total number of Code Blocks
+ * in currently processed Transport Block
+ */
+ uint64_t cbs_in_op;
+ };
+
+ uint8_t sw_ctxt[AGX100_RING_DESC_LEN_UNIT_BYTES *
+ (AGX100_RING_DESC_ENTRY_LENGTH - 1)];
+ };
+};
+
+/* AGX100 UL DMA Decoding Request Descriptor. */
+struct __rte_packed agx100_dma_dec_desc {
+ uint32_t done:1, /**< 0: not completed 1: completed. */
+ tb_crc_pass:1, /**< 0: doesn't pass 1: pass. */
+ cb_crc_all_pass:1, /**< 0: doesn't pass 1: pass. */
+ cb_all_et_pass:1, /**< 0: not all decoded 1: all decoded. */
+ max_iter_ret:6, /**< Iteration number returned by LDPC decoder. */
+ cgb_crc_bitmap:8, /**< Field valid only when workload is TB or CBGs. */
+ error_msg:2,
+ error_code:4,
+ et_dis:1, /**< Disable the early termination feature of LDPC decoder. */
+ harq_in_en:1, /**< 0: combine disabled 1: combine enable.*/
+ max_iter:6; /**< Maximum value of iteration for decoding CB. */
+ uint32_t ncb:16, /**< Limited circular buffer size. */
+ bg_idx:1, /**< Base Graph 0: BG1 1: BG2.*/
+ qm_idx:3, /**< 0: BPSK; 1: QPSK; 2: 16QAM; 3: 64QAM; 4: 256QAM. */
+ zc:9, /**< Lifting size. */
+ rv:2, /**< Redundancy version number. */
+ int_en:1; /**< Interrupt enable. */
+ uint32_t max_cbg:4, /**< Only valid when workload is TB or CBGs. */
+ rsrvd0:4,
+ cbgti:8, /**< CBG bitmap. */
+ cbgfi:1, /**< 0: overwrite HARQ buffer 1: enable HARQ for CBGs. */
+ rsrvd1:3,
+ cbgs:1, /**< 0: TB or CB 1: CBGs. */
+ desc_idx:11; /**< Sequence number of the descriptor. */
+ uint32_t ca:10, /**< Code block number with Ea in TB or CBG. */
+ c:10, /**< Total code block number in TB or CBG. */
+ llr_pckg:1, /**< 0: 8-bit LLR 1: 6-bit LLR packed together. */
+ syndrome_check_mode:1, /**<0: full syndrome check 1: 4-layer syndome check.*/
+ num_null:10; /**< Number of null bits. */
+ uint32_t ea:21, /**< Value of E when worload is CB. */
+ rsrvd2:3,
+ eba:8; /**< Only valid when workload is TB or CBGs. */
+ uint32_t hbstore_offset_out:24, /**< HARQ buffer write address. */
+ rsrvd3:8;
+ uint32_t hbstore_offset_in:24, /**< HARQ buffer read address. */
+ en_slice_ts:1, /**< Enable slice descriptor timestamp. */
+ en_host_ts:1, /**< Enable host descriptor timestamp. */
+ en_cb_wr_status:1, /**< Enable code block write back status. */
+ en_output_sg:1, /**< Enable RX scatter-gather. */
+ en_input_sg:1, /**< Enable TX scatter-gather. */
+ tb_cb:1, /**< 2'b10: the descriptor is for a TrBlk.
+ * 2'b00: the descriptor is for a CBlk.
+ * 2'b11 or 01: the descriptor is for a CBGs.
+ */
+ crc24b_ind:1, /**< 1: CB includes CRC, need LDPC-V to check the CB CRC.
+ * 0: There is no CB CRC check.
+ * Only valid when workload is CB or CBGs.
+ */
+ drop_crc24b:1; /**< 1: CB CRC will be dropped. */
+ uint32_t harq_input_length_a: 16, /**< HARQ_input_length for CB. */
+ harq_input_length_b:16; /**< Only valid when workload is TB or CBGs. */
+ union {
+ uint32_t input_slice_table_addr_lo; /**< Used when scatter-gather enabled.*/
+ uint32_t input_start_addr_lo; /**< Used when scatter-gather disabled. */
+ };
+ union {
+ uint32_t input_slice_table_addr_hi; /**< Used when scatter-gather enabled.*/
+ uint32_t input_start_addr_hi; /**< Used when scatter-gather disabled. */
+ };
+ union {
+ uint32_t input_slice_num:21, /**< Used when scatter-gather enabled. */
+ rsrvd4:11;
+ uint32_t input_length:26, /**< Used when scatter-gather disabled. */
+ rsrvd5:6;
+ };
+ union {
+ uint32_t output_slice_table_addr_lo; /**< Used when scatter-gather enabled.*/
+ uint32_t output_start_addr_lo; /**< Used when scatter-gather disabled. */
+ };
+ union {
+ uint32_t output_slice_table_addr_hi; /**< Used when scatter-gather enabled.*/
+ uint32_t output_start_addr_hi; /**< Used when scatter-gather disabled. */
+ };
+ union {
+ uint32_t output_slice_num:21, /**< Used when scatter-gather enabled. */
+ rsrvd6:11;
+ uint32_t output_length:26, /**< Used when scatter-gather disabled. */
+ rsrvd7:6;
+ };
+ uint32_t enqueue_timestamp:31, /**< Time when AGX100 receives descriptor. */
+ rsrvd8:1;
+ uint32_t completion_timestamp:31, /**< Time when AGX100 completes descriptor. */
+ rsrvd9:1;
+
+ union {
+ struct {
+ /** Virtual addresses used to retrieve SW context info. */
+ void *op_addr;
+ /** Stores information about total number of Code Blocks
+ * in currently processed Transport Block
+ */
+ uint8_t cbs_in_op;
+ };
+
+ uint8_t sw_ctxt[AGX100_RING_DESC_LEN_UNIT_BYTES *
+ (AGX100_RING_DESC_ENTRY_LENGTH - 1)];
+ };
+};
+
+/* AGX100 DMA Descriptor. */
+union agx100_dma_desc {
+ struct agx100_dma_enc_desc agx100_enc_req;
+ struct agx100_dma_dec_desc agx100_dec_req;
+};
+
+#endif /* _AGX100_H_ */
diff --git a/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
index c88d276cc48f..d0d9ee64dbde 100644
--- a/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
+++ b/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
@@ -8,6 +8,7 @@
#include <stdint.h>
#include <stdbool.h>
+#include "agx100_pmd.h"
#include "vc_5gnr_pmd.h"
/* Helper macro for logging */
@@ -131,12 +132,17 @@ struct fpga_5gnr_fec_device {
uint64_t q_assigned_bit_map;
/** True if this is a PF FPGA 5GNR device. */
bool pf_device;
+ /** Maximum number of possible queues for this device */
+ uint8_t total_num_queues;
+ /** FPGA Variant. VC_5GNR_FPGA_VARIANT = 0; AGX100_FPGA_VARIANT = 1 */
+ uint8_t fpga_variant;
};
/** Structure associated with each queue. */
struct __rte_cache_aligned fpga_5gnr_queue {
struct fpga_5gnr_ring_ctrl_reg ring_ctrl_reg; /**< Ring Control Register */
union vc_5gnr_dma_desc *vc_5gnr_ring_addr; /**< Virtual address of VC 5GNR software ring. */
+ union agx100_dma_desc *agx100_ring_addr; /**< Virtual address of AGX100 software ring */
uint64_t *ring_head_addr; /* Virtual address of completion_head */
uint64_t shadow_completion_head; /* Shadow completion head value */
uint16_t head_free_desc; /* Ring head */
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index 979028405902..a2ce859f5d4b 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -18,8 +18,8 @@
#include <rte_bbdev.h>
#include <rte_bbdev_pmd.h>
-#include "fpga_5gnr_fec.h"
#include "rte_pmd_fpga_5gnr_fec.h"
+#include "fpga_5gnr_fec.h"
#ifdef RTE_LIBRTE_BBDEV_DEBUG
RTE_LOG_REGISTER_DEFAULT(fpga_5gnr_fec_logtype, DEBUG);
@@ -71,9 +71,11 @@ print_ring_reg_debug_info(void *mmio_base, uint32_t offset)
/* Read Static Register of Vista Creek device. */
static inline void
-print_static_reg_debug_info(void *mmio_base)
+print_static_reg_debug_info(void *mmio_base, uint8_t fpga_variant)
{
- uint16_t config = fpga_5gnr_reg_read_16(mmio_base, VC_5GNR_CONFIGURATION);
+ uint16_t config;
+ if (fpga_variant == VC_5GNR_FPGA_VARIANT)
+ config = fpga_5gnr_reg_read_16(mmio_base, VC_5GNR_CONFIGURATION);
uint8_t qmap_done = fpga_5gnr_reg_read_8(mmio_base,
FPGA_5GNR_FEC_QUEUE_PF_VF_MAP_DONE);
uint16_t lb_factor = fpga_5gnr_reg_read_16(mmio_base,
@@ -81,14 +83,19 @@ print_static_reg_debug_info(void *mmio_base)
uint16_t ring_desc_len = fpga_5gnr_reg_read_16(mmio_base,
FPGA_5GNR_FEC_RING_DESC_LEN);
- rte_bbdev_log_debug("UL.DL Weights = %u.%u",
- ((uint8_t)config), ((uint8_t)(config >> 8)));
+ if (fpga_variant == VC_5GNR_FPGA_VARIANT)
+ rte_bbdev_log_debug("UL.DL Weights = %u.%u",
+ ((uint8_t)config), ((uint8_t)(config >> 8)));
rte_bbdev_log_debug("UL.DL Load Balance = %u.%u",
((uint8_t)lb_factor), ((uint8_t)(lb_factor >> 8)));
rte_bbdev_log_debug("Queue-PF/VF Mapping Table = %s",
(qmap_done > 0) ? "READY" : "NOT-READY");
- rte_bbdev_log_debug("Ring Descriptor Size = %u bytes",
- ring_desc_len*VC_5GNR_RING_DESC_LEN_UNIT_BYTES);
+ if (fpga_variant == VC_5GNR_FPGA_VARIANT)
+ rte_bbdev_log_debug("Ring Descriptor Size = %u bytes",
+ ring_desc_len*VC_5GNR_RING_DESC_LEN_UNIT_BYTES);
+ else
+ rte_bbdev_log_debug("Ring Descriptor Size = %u bytes",
+ ring_desc_len*AGX100_RING_DESC_LEN_UNIT_BYTES);
}
/* Print decode DMA Descriptor of Vista Creek Decoder device. */
@@ -142,6 +149,108 @@ vc_5gnr_print_dma_dec_desc_debug_info(union vc_5gnr_dma_desc *desc)
word[4], word[5], word[6], word[7]);
}
+/* Print decode DMA Descriptor of AGX100 Decoder device */
+static void
+agx100_print_dma_dec_desc_debug_info(union agx100_dma_desc *desc)
+{
+ rte_bbdev_log_debug("DMA response desc %p\n"
+ "\t-- done(%"PRIu32") | tb_crc_pass(%"PRIu32") | cb_crc_all_pass(%"PRIu32")"
+ " | cb_all_et_pass(%"PRIu32") | max_iter_ret(%"PRIu32") |"
+ "cgb_crc_bitmap(%"PRIu32") | error_msg(%"PRIu32") | error_code(%"PRIu32") |"
+ "et_dis (%"PRIu32") | harq_in_en(%"PRIu32") | max_iter(%"PRIu32")\n"
+ "\t-- ncb(%"PRIu32") | bg_idx (%"PRIu32") | qm_idx (%"PRIu32")"
+ "| zc(%"PRIu32") | rv(%"PRIu32") | int_en(%"PRIu32")\n"
+ "\t-- max_cbg(%"PRIu32") | cbgti(%"PRIu32") | cbgfi(%"PRIu32") |"
+ "cbgs(%"PRIu32") | desc_idx(%"PRIu32")\n"
+ "\t-- ca(%"PRIu32") | c(%"PRIu32") | llr_pckg(%"PRIu32") |"
+ "syndrome_check_mode(%"PRIu32") | num_null(%"PRIu32")\n"
+ "\t-- ea(%"PRIu32") | eba(%"PRIu32")\n"
+ "\t-- hbstore_offset_out(%"PRIu32")\n"
+ "\t-- hbstore_offset_in(%"PRIu32") | en_slice_ts(%"PRIu32") |"
+ "en_host_ts(%"PRIu32") | en_cb_wr_status(%"PRIu32")"
+ " | en_output_sg(%"PRIu32") | en_input_sg(%"PRIu32") | tb_cb(%"PRIu32")"
+ " | crc24b_ind(%"PRIu32")| drop_crc24b(%"PRIu32")\n"
+ "\t-- harq_input_length_a(%"PRIu32") | harq_input_length_b(%"PRIu32")\n"
+ "\t-- input_slice_table_addr_lo(%"PRIu32")"
+ " | input_start_addr_lo(%"PRIu32")\n"
+ "\t-- input_slice_table_addr_hi(%"PRIu32")"
+ " | input_start_addr_hi(%"PRIu32")\n"
+ "\t-- input_slice_num(%"PRIu32") | input_length(%"PRIu32")\n"
+ "\t-- output_slice_table_addr_lo(%"PRIu32")"
+ " | output_start_addr_lo(%"PRIu32")\n"
+ "\t-- output_slice_table_addr_hi(%"PRIu32")"
+ " | output_start_addr_hi(%"PRIu32")\n"
+ "\t-- output_slice_num(%"PRIu32") | output_length(%"PRIu32")\n"
+ "\t-- enqueue_timestamp(%"PRIu32")\n"
+ "\t-- completion_timestamp(%"PRIu32")\n",
+ desc,
+ (uint32_t)desc->agx100_dec_req.done,
+ (uint32_t)desc->agx100_dec_req.tb_crc_pass,
+ (uint32_t)desc->agx100_dec_req.cb_crc_all_pass,
+ (uint32_t)desc->agx100_dec_req.cb_all_et_pass,
+ (uint32_t)desc->agx100_dec_req.max_iter_ret,
+ (uint32_t)desc->agx100_dec_req.cgb_crc_bitmap,
+ (uint32_t)desc->agx100_dec_req.error_msg,
+ (uint32_t)desc->agx100_dec_req.error_code,
+ (uint32_t)desc->agx100_dec_req.et_dis,
+ (uint32_t)desc->agx100_dec_req.harq_in_en,
+ (uint32_t)desc->agx100_dec_req.max_iter,
+ (uint32_t)desc->agx100_dec_req.ncb,
+ (uint32_t)desc->agx100_dec_req.bg_idx,
+ (uint32_t)desc->agx100_dec_req.qm_idx,
+ (uint32_t)desc->agx100_dec_req.zc,
+ (uint32_t)desc->agx100_dec_req.rv,
+ (uint32_t)desc->agx100_dec_req.int_en,
+ (uint32_t)desc->agx100_dec_req.max_cbg,
+ (uint32_t)desc->agx100_dec_req.cbgti,
+ (uint32_t)desc->agx100_dec_req.cbgfi,
+ (uint32_t)desc->agx100_dec_req.cbgs,
+ (uint32_t)desc->agx100_dec_req.desc_idx,
+ (uint32_t)desc->agx100_dec_req.ca,
+ (uint32_t)desc->agx100_dec_req.c,
+ (uint32_t)desc->agx100_dec_req.llr_pckg,
+ (uint32_t)desc->agx100_dec_req.syndrome_check_mode,
+ (uint32_t)desc->agx100_dec_req.num_null,
+ (uint32_t)desc->agx100_dec_req.ea,
+ (uint32_t)desc->agx100_dec_req.eba,
+ (uint32_t)desc->agx100_dec_req.hbstore_offset_out,
+ (uint32_t)desc->agx100_dec_req.hbstore_offset_in,
+ (uint32_t)desc->agx100_dec_req.en_slice_ts,
+ (uint32_t)desc->agx100_dec_req.en_host_ts,
+ (uint32_t)desc->agx100_dec_req.en_cb_wr_status,
+ (uint32_t)desc->agx100_dec_req.en_output_sg,
+ (uint32_t)desc->agx100_dec_req.en_input_sg,
+ (uint32_t)desc->agx100_dec_req.tb_cb,
+ (uint32_t)desc->agx100_dec_req.crc24b_ind,
+ (uint32_t)desc->agx100_dec_req.drop_crc24b,
+ (uint32_t)desc->agx100_dec_req.harq_input_length_a,
+ (uint32_t)desc->agx100_dec_req.harq_input_length_b,
+ (uint32_t)desc->agx100_dec_req.input_slice_table_addr_lo,
+ (uint32_t)desc->agx100_dec_req.input_start_addr_lo,
+ (uint32_t)desc->agx100_dec_req.input_slice_table_addr_hi,
+ (uint32_t)desc->agx100_dec_req.input_start_addr_hi,
+ (uint32_t)desc->agx100_dec_req.input_slice_num,
+ (uint32_t)desc->agx100_dec_req.input_length,
+ (uint32_t)desc->agx100_dec_req.output_slice_table_addr_lo,
+ (uint32_t)desc->agx100_dec_req.output_start_addr_lo,
+ (uint32_t)desc->agx100_dec_req.output_slice_table_addr_hi,
+ (uint32_t)desc->agx100_dec_req.output_start_addr_hi,
+ (uint32_t)desc->agx100_dec_req.output_slice_num,
+ (uint32_t)desc->agx100_dec_req.output_length,
+ (uint32_t)desc->agx100_dec_req.enqueue_timestamp,
+ (uint32_t)desc->agx100_dec_req.completion_timestamp);
+
+ uint32_t *word = (uint32_t *) desc;
+ rte_bbdev_log_debug("%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n"
+ "%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n"
+ "%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n"
+ "%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n",
+ word[0], word[1], word[2], word[3],
+ word[4], word[5], word[6], word[7],
+ word[8], word[9], word[10], word[11],
+ word[12], word[13], word[14], word[15]);
+}
+
/* Print decode DMA Descriptor of Vista Creek encoder device */
static void
vc_5gnr_print_dma_enc_desc_debug_info(union vc_5gnr_dma_desc *desc)
@@ -175,6 +284,87 @@ vc_5gnr_print_dma_enc_desc_debug_info(union vc_5gnr_dma_desc *desc)
word[4], word[5], word[6], word[7]);
}
+/* Print decode DMA Descriptor of AGX100 encoder device */
+static void
+agx100_print_dma_enc_desc_debug_info(union agx100_dma_desc *desc)
+{
+ rte_bbdev_log_debug("DMA response desc %p\n"
+ "\t-- done(%"PRIu32") | error_msg(%"PRIu32") | error_code(%"PRIu32")\n"
+ "\t-- ncb(%"PRIu32") | bg_idx (%"PRIu32") | qm_idx (%"PRIu32")"
+ "| zc(%"PRIu32") | rv(%"PRIu32") | int_en(%"PRIu32")\n"
+ "\t-- max_cbg(%"PRIu32") | cbgti(%"PRIu32") | cbgs(%"PRIu32") | "
+ "desc_idx(%"PRIu32")\n"
+ "\t-- ca(%"PRIu32") | c(%"PRIu32") | num_null(%"PRIu32")\n"
+ "\t-- ea(%"PRIu32")\n"
+ "\t-- eb(%"PRIu32")\n"
+ "\t-- k_(%"PRIu32") | en_slice_ts(%"PRIu32") | en_host_ts(%"PRIu32") | "
+ "en_cb_wr_status(%"PRIu32") | en_output_sg(%"PRIu32") | "
+ "en_input_sg(%"PRIu32") | tb_cb(%"PRIu32") | crc_en(%"PRIu32")\n"
+ "\t-- input_slice_table_addr_lo(%"PRIu32")"
+ " | input_start_addr_lo(%"PRIu32")\n"
+ "\t-- input_slice_table_addr_hi(%"PRIu32")"
+ " | input_start_addr_hi(%"PRIu32")\n"
+ "\t-- input_slice_num(%"PRIu32") | input_length(%"PRIu32")\n"
+ "\t-- output_slice_table_addr_lo(%"PRIu32")"
+ " | output_start_addr_lo(%"PRIu32")\n"
+ "\t-- output_slice_table_addr_hi(%"PRIu32")"
+ " | output_start_addr_hi(%"PRIu32")\n"
+ "\t-- output_slice_num(%"PRIu32") | output_length(%"PRIu32")\n"
+ "\t-- enqueue_timestamp(%"PRIu32")\n"
+ "\t-- completion_timestamp(%"PRIu32")\n",
+ desc,
+ (uint32_t)desc->agx100_enc_req.done,
+ (uint32_t)desc->agx100_enc_req.error_msg,
+ (uint32_t)desc->agx100_enc_req.error_code,
+ (uint32_t)desc->agx100_enc_req.ncb,
+ (uint32_t)desc->agx100_enc_req.bg_idx,
+ (uint32_t)desc->agx100_enc_req.qm_idx,
+ (uint32_t)desc->agx100_enc_req.zc,
+ (uint32_t)desc->agx100_enc_req.rv,
+ (uint32_t)desc->agx100_enc_req.int_en,
+ (uint32_t)desc->agx100_enc_req.max_cbg,
+ (uint32_t)desc->agx100_enc_req.cbgti,
+ (uint32_t)desc->agx100_enc_req.cbgs,
+ (uint32_t)desc->agx100_enc_req.desc_idx,
+ (uint32_t)desc->agx100_enc_req.ca,
+ (uint32_t)desc->agx100_enc_req.c,
+ (uint32_t)desc->agx100_enc_req.num_null,
+ (uint32_t)desc->agx100_enc_req.ea,
+ (uint32_t)desc->agx100_enc_req.eb,
+ (uint32_t)desc->agx100_enc_req.k_,
+ (uint32_t)desc->agx100_enc_req.en_slice_ts,
+ (uint32_t)desc->agx100_enc_req.en_host_ts,
+ (uint32_t)desc->agx100_enc_req.en_cb_wr_status,
+ (uint32_t)desc->agx100_enc_req.en_output_sg,
+ (uint32_t)desc->agx100_enc_req.en_input_sg,
+ (uint32_t)desc->agx100_enc_req.tb_cb,
+ (uint32_t)desc->agx100_enc_req.crc_en,
+ (uint32_t)desc->agx100_enc_req.input_slice_table_addr_lo,
+ (uint32_t)desc->agx100_enc_req.input_start_addr_lo,
+ (uint32_t)desc->agx100_enc_req.input_slice_table_addr_hi,
+ (uint32_t)desc->agx100_enc_req.input_start_addr_hi,
+ (uint32_t)desc->agx100_enc_req.input_slice_num,
+ (uint32_t)desc->agx100_enc_req.input_length,
+ (uint32_t)desc->agx100_enc_req.output_slice_table_addr_lo,
+ (uint32_t)desc->agx100_enc_req.output_start_addr_lo,
+ (uint32_t)desc->agx100_enc_req.output_slice_table_addr_hi,
+ (uint32_t)desc->agx100_enc_req.output_start_addr_hi,
+ (uint32_t)desc->agx100_enc_req.output_slice_num,
+ (uint32_t)desc->agx100_enc_req.output_length,
+ (uint32_t)desc->agx100_enc_req.enqueue_timestamp,
+ (uint32_t)desc->agx100_enc_req.completion_timestamp);
+
+ uint32_t *word = (uint32_t *) desc;
+ rte_bbdev_log_debug("%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n"
+ "%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n"
+ "%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n"
+ "%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n",
+ word[0], word[1], word[2], word[3],
+ word[4], word[5], word[6], word[7],
+ word[8], word[9], word[10], word[11],
+ word[12], word[13], word[14], word[15]);
+}
+
#endif
static int
@@ -198,14 +388,32 @@ fpga_5gnr_setup_queues(struct rte_bbdev *dev, uint16_t num_queues, int socket_id
/* Clear queue registers structure */
memset(&ring_reg, 0, sizeof(struct fpga_5gnr_ring_ctrl_reg));
+ if (d->fpga_variant == AGX100_FPGA_VARIANT) {
+ /* Maximum number of queues possible for this device */
+ d->total_num_queues = fpga_5gnr_reg_read_32(
+ d->mmio_base,
+ FPGA_5GNR_FEC_VERSION_ID) >> 24;
+ if (d->total_num_queues > AGX100_MAXIMUM_QUEUES_SUPPORTED) {
+ rte_bbdev_log(ERR,
+ "Total number of queues defined greater %d! Register value corrupted?\n",
+ AGX100_MAXIMUM_QUEUES_SUPPORTED);
+ return -EPERM;
+ }
+ }
+
/* Scan queue map.
* If a queue is valid and mapped to a calling PF/VF the read value is
* replaced with a queue ID and if it's not then
* FPGA_5GNR_INVALID_HW_QUEUE_ID is returned.
*/
- for (q_id = 0; q_id < VC_5GNR_TOTAL_NUM_QUEUES; ++q_id) {
- uint32_t hw_q_id = fpga_5gnr_reg_read_32(d->mmio_base,
- VC_5GNR_QUEUE_MAP + (q_id << 2));
+ for (q_id = 0; q_id < d->total_num_queues; ++q_id) {
+ uint32_t hw_q_id;
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT)
+ hw_q_id = fpga_5gnr_reg_read_32(d->mmio_base,
+ VC_5GNR_QUEUE_MAP + (q_id << 2));
+ else
+ hw_q_id = fpga_5gnr_reg_read_32(d->mmio_base,
+ AGX100_QUEUE_MAP + (q_id << 2));
rte_bbdev_log_debug("%s: queue ID: %u, registry queue ID: %u",
dev->device->name, q_id, hw_q_id);
@@ -231,8 +439,10 @@ fpga_5gnr_setup_queues(struct rte_bbdev *dev, uint16_t num_queues, int socket_id
dev->device->name, num_queues, hw_q_num);
return -EINVAL;
}
-
- ring_size = FPGA_5GNR_RING_MAX_SIZE * sizeof(struct vc_5gnr_dma_dec_desc);
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT)
+ ring_size = FPGA_5GNR_RING_MAX_SIZE * sizeof(struct vc_5gnr_dma_dec_desc);
+ else
+ ring_size = FPGA_5GNR_RING_MAX_SIZE * sizeof(struct agx100_dma_dec_desc);
/* Enforce 32 byte alignment */
RTE_BUILD_BUG_ON((RTE_CACHE_LINE_SIZE % 32) != 0);
@@ -357,8 +567,11 @@ fpga_5gnr_dev_info_get(struct rte_bbdev *dev, struct rte_bbdev_driver_info *dev_
dev_info->driver_name = dev->device->driver->name;
dev_info->queue_size_lim = FPGA_5GNR_RING_MAX_SIZE;
dev_info->hardware_accelerated = true;
- dev_info->min_alignment = 64;
- dev_info->harq_buffer_size = (harq_buf_size >> 10) + 1;
+ dev_info->min_alignment = 1;
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT)
+ dev_info->harq_buffer_size = (harq_buf_size >> 10) + 1;
+ else
+ dev_info->harq_buffer_size = harq_buf_size << 10;
dev_info->default_queue_conf = default_queue_conf;
dev_info->capabilities = bbdev_capabilities;
dev_info->cpu_flag_reqs = NULL;
@@ -367,9 +580,14 @@ fpga_5gnr_dev_info_get(struct rte_bbdev *dev, struct rte_bbdev_driver_info *dev_
/* Calculates number of queues assigned to device */
dev_info->max_num_queues = 0;
- for (q_id = 0; q_id < VC_5GNR_TOTAL_NUM_QUEUES; ++q_id) {
- uint32_t hw_q_id = fpga_5gnr_reg_read_32(d->mmio_base,
- VC_5GNR_QUEUE_MAP + (q_id << 2));
+ for (q_id = 0; q_id < d->total_num_queues; ++q_id) {
+ uint32_t hw_q_id;
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT)
+ hw_q_id = fpga_5gnr_reg_read_32(d->mmio_base,
+ VC_5GNR_QUEUE_MAP + (q_id << 2));
+ else
+ hw_q_id = fpga_5gnr_reg_read_32(d->mmio_base,
+ AGX100_QUEUE_MAP + (q_id << 2));
if (hw_q_id != FPGA_5GNR_INVALID_HW_QUEUE_ID)
dev_info->max_num_queues++;
}
@@ -377,8 +595,8 @@ fpga_5gnr_dev_info_get(struct rte_bbdev *dev, struct rte_bbdev_driver_info *dev_
dev_info->num_queues[RTE_BBDEV_OP_NONE] = 0;
dev_info->num_queues[RTE_BBDEV_OP_TURBO_DEC] = 0;
dev_info->num_queues[RTE_BBDEV_OP_TURBO_ENC] = 0;
- dev_info->num_queues[RTE_BBDEV_OP_LDPC_DEC] = dev_info->max_num_queues / 2;
- dev_info->num_queues[RTE_BBDEV_OP_LDPC_ENC] = dev_info->max_num_queues / 2;
+ dev_info->num_queues[RTE_BBDEV_OP_LDPC_DEC] = dev_info->max_num_queues >> 1;
+ dev_info->num_queues[RTE_BBDEV_OP_LDPC_ENC] = dev_info->max_num_queues >> 1;
dev_info->queue_priority[RTE_BBDEV_OP_LDPC_DEC] = 1;
dev_info->queue_priority[RTE_BBDEV_OP_LDPC_ENC] = 1;
}
@@ -394,11 +612,11 @@ fpga_5gnr_find_free_queue_idx(struct rte_bbdev *dev,
struct fpga_5gnr_fec_device *d = dev->data->dev_private;
uint64_t q_idx;
uint8_t i = 0;
- uint8_t range = VC_5GNR_TOTAL_NUM_QUEUES >> 1;
+ uint8_t range = d->total_num_queues >> 1;
if (conf->op_type == RTE_BBDEV_OP_LDPC_ENC) {
- i = VC_5GNR_NUM_DL_QUEUES;
- range = VC_5GNR_TOTAL_NUM_QUEUES;
+ i = d->total_num_queues >> 1;
+ range = d->total_num_queues;
}
for (; i < range; ++i) {
@@ -445,7 +663,11 @@ fpga_5gnr_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
q->q_idx = q_idx;
/* Set ring_base_addr */
- q->vc_5gnr_ring_addr = RTE_PTR_ADD(d->sw_rings, (d->sw_ring_size * queue_id));
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT)
+ q->vc_5gnr_ring_addr = RTE_PTR_ADD(d->sw_rings, (d->sw_ring_size * queue_id));
+ else
+ q->agx100_ring_addr = RTE_PTR_ADD(d->sw_rings, (d->sw_ring_size * queue_id));
+
q->ring_ctrl_reg.ring_base_addr = d->sw_rings_phys + (d->sw_ring_size * queue_id);
/* Allocate memory for Completion Head variable*/
@@ -661,7 +883,7 @@ fpga_5gnr_dev_interrupt_handler(void *cb_arg)
uint8_t i;
/* Scan queue assigned to this device */
- for (i = 0; i < VC_5GNR_TOTAL_NUM_QUEUES; ++i) {
+ for (i = 0; i < d->total_num_queues; ++i) {
q_idx = 1ULL << i;
if (d->q_bound_bit_map & q_idx) {
queue_id = get_queue_id(dev->data, i);
@@ -710,6 +932,13 @@ fpga_5gnr_intr_enable(struct rte_bbdev *dev)
{
int ret;
uint8_t i;
+ struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+ uint8_t num_intr_vec;
+
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT)
+ num_intr_vec = VC_5GNR_NUM_INTR_VEC;
+ else
+ num_intr_vec = d->total_num_queues - RTE_INTR_VEC_RXTX_OFFSET;
if (!rte_intr_cap_multiple(dev->intr_handle)) {
rte_bbdev_log(ERR, "Multiple intr vector is not supported by FPGA (%s)",
@@ -717,15 +946,15 @@ fpga_5gnr_intr_enable(struct rte_bbdev *dev)
return -ENOTSUP;
}
- /* Create event file descriptors for each of 64 queue. Event fds will be
- * mapped to FPGA IRQs in rte_intr_enable(). This is a 1:1 mapping where
- * the IRQ number is a direct translation to the queue number.
+ /* Create event file descriptors for each of the supported queues (Maximum 64).
+ * Event fds will be mapped to FPGA IRQs in rte_intr_enable().
+ * This is a 1:1 mapping where the IRQ number is a direct translation to the queue number.
*
- * 63 (VC_5GNR_NUM_INTR_VEC) event fds are created as rte_intr_enable()
+ * num_intr_vec event fds are created as rte_intr_enable()
* mapped the first IRQ to already created interrupt event file
* descriptor (intr_handle->fd).
*/
- if (rte_intr_efd_enable(dev->intr_handle, VC_5GNR_NUM_INTR_VEC)) {
+ if (rte_intr_efd_enable(dev->intr_handle, num_intr_vec)) {
rte_bbdev_log(ERR, "Failed to create fds for %u queues", dev->data->num_queues);
return -1;
}
@@ -735,7 +964,7 @@ fpga_5gnr_intr_enable(struct rte_bbdev *dev)
* It ensures that callback function assigned to that descriptor will
* invoked when any FPGA queue issues interrupt.
*/
- for (i = 0; i < VC_5GNR_NUM_INTR_VEC; ++i) {
+ for (i = 0; i < num_intr_vec; ++i) {
if (rte_intr_efds_index_set(dev->intr_handle, i,
rte_intr_fd_get(dev->intr_handle)))
return -rte_errno;
@@ -856,6 +1085,72 @@ vc_5gnr_check_desc_error(uint32_t error_code) {
return 1;
}
+/* AGX100 FPGA descriptor errors
+ * Print an error if a descriptor error has occurred.
+ * Return 0 on success, 1 on failure
+ */
+static inline int
+agx100_check_desc_error(uint32_t error_code, uint32_t error_msg) {
+ uint8_t error = error_code << 4 | error_msg;
+ switch (error) {
+ case AGX100_DESC_ERR_NO_ERR:
+ return 0;
+ case AGX100_DESC_ERR_E_NOT_LEGAL:
+ rte_bbdev_log(ERR, "Invalid output length of rate matcher E");
+ break;
+ case AGX100_DESC_ERR_K_P_OUT_OF_RANGE:
+ rte_bbdev_log(ERR, "Encode block size K' is out of range");
+ break;
+ case AGX100_DESC_ERR_NCB_OUT_OF_RANGE:
+ rte_bbdev_log(ERR, "Ncb circular buffer size is out of range");
+ break;
+ case AGX100_DESC_ERR_Z_C_NOT_LEGAL:
+ rte_bbdev_log(ERR, "Zc is illegal");
+ break;
+ case AGX100_DESC_ERR_DESC_INDEX_ERR:
+ rte_bbdev_log(ERR,
+ "Desc_index received does not meet the expectation in the AGX100"
+ );
+ break;
+ case AGX100_DESC_ERR_HARQ_INPUT_LEN_A:
+ rte_bbdev_log(ERR, "HARQ input length A is invalid.");
+ break;
+ case AGX100_DESC_ERR_HARQ_INPUT_LEN_B:
+ rte_bbdev_log(ERR, "HARQ input length B is invalid.");
+ break;
+ case AGX100_DESC_ERR_HBSTORE_OFFSET_ERR:
+ rte_bbdev_log(ERR, "Hbstore exceeds HARQ buffer size.");
+ break;
+ case AGX100_DESC_ERR_TB_CBG_ERR:
+ rte_bbdev_log(ERR, "Total CB number C=0 or CB number with Ea Ca=0 or Ca>C.");
+ break;
+ case AGX100_DESC_ERR_CBG_OUT_OF_RANGE:
+ rte_bbdev_log(ERR, "Cbgti or max_cbg is out of range");
+ break;
+ case AGX100_DESC_ERR_CW_RM_NOT_LEGAL:
+ rte_bbdev_log(ERR, "Cw_rm is illegal");
+ break;
+ case AGX100_DESC_ERR_UNSUPPORTED_REQ:
+ rte_bbdev_log(ERR, "Unsupported request for descriptor");
+ break;
+ case AGX100_DESC_ERR_RESERVED:
+ rte_bbdev_log(ERR, "Reserved");
+ break;
+ case AGX100_DESC_ERR_DESC_ABORT:
+ rte_bbdev_log(ERR, "Completed abort for descriptor");
+ break;
+ case AGX100_DESC_ERR_DESC_READ_TLP_POISONED:
+ rte_bbdev_log(ERR, "Descriptor read TLP poisoned");
+ break;
+ default:
+ rte_bbdev_log(ERR,
+ "Descriptor error unknown error code %u error msg %u",
+ error_code, error_msg);
+ break;
+ }
+ return 1;
+}
+
/* Compute value of k0.
* Based on 3GPP 38.212 Table 5.4.2.1-2
* Starting position of different redundancy versions, k0
@@ -953,6 +1248,88 @@ vc_5gnr_dma_desc_te_fill(struct rte_bbdev_enc_op *op,
return 0;
}
+/**
+ * AGX100 FPGA
+ * Set DMA descriptor for encode operation (1 Code Block)
+ *
+ * @param op
+ * Pointer to a single encode operation.
+ * @param desc
+ * Pointer to DMA descriptor.
+ * @param input
+ * Pointer to pointer to input data which will be decoded.
+ * @param e
+ * E value (length of output in bits).
+ * @param ncb
+ * Ncb value (size of the soft buffer).
+ * @param out_length
+ * Length of output buffer
+ * @param in_offset
+ * Input offset in rte_mbuf structure. It is used for calculating the point
+ * where data is starting.
+ * @param out_offset
+ * Output offset in rte_mbuf structure. It is used for calculating the point
+ * where hard output data will be stored.
+ * @param cbs_in_op
+ * Number of CBs contained in one operation.
+ */
+static inline int
+agx100_dma_desc_le_fill(struct rte_bbdev_enc_op *op,
+ struct agx100_dma_enc_desc *desc, struct rte_mbuf *input,
+ struct rte_mbuf *output, uint16_t k_, uint32_t e,
+ uint32_t in_offset, uint32_t out_offset, uint16_t desc_offset,
+ uint8_t cbs_in_op)
+{
+ /* reset */
+ desc->done = 0;
+ desc->error_msg = 0;
+ desc->error_code = 0;
+ desc->ncb = op->ldpc_enc.n_cb;
+ desc->bg_idx = op->ldpc_enc.basegraph - 1;
+ desc->qm_idx = op->ldpc_enc.q_m >> 1;
+ desc->zc = op->ldpc_enc.z_c;
+ desc->rv = op->ldpc_enc.rv_index;
+ desc->int_en = 0; /**< Set by device externally*/
+ desc->max_cbg = 0; /*TODO: CBG specific */
+ desc->cbgti = 0; /*TODO: CBG specific */
+ desc->cbgs = 0; /*TODO: CBG specific */
+ desc->desc_idx = desc_offset;
+ desc->ca = 0; /*TODO: CBG specific */
+ desc->c = 0; /*TODO: CBG specific */
+ desc->num_null = op->ldpc_enc.n_filler;
+ desc->ea = e;
+ desc->eb = e; /*TODO: TB/CBG specific */
+ desc->k_ = k_;
+ desc->en_slice_ts = 0; /*TODO: Slice specific*/
+ desc->en_host_ts = 0; /*TODO: Slice specific*/
+ desc->en_cb_wr_status = 0; /*TODO: Event Queue specific*/
+ desc->en_output_sg = 0; /*TODO: Slice specific*/
+ desc->en_input_sg = 0; /*TODO: Slice specific*/
+ desc->tb_cb = 0; /*Descriptor for CB. TODO: Add TB and CBG logic*/
+ desc->crc_en = check_bit(op->ldpc_enc.op_flags,
+ RTE_BBDEV_LDPC_CRC_24B_ATTACH);
+
+ /* Set inbound/outbound data buffer address */
+ /* TODO: add logic for input_slice */
+ desc->output_start_addr_hi = (uint32_t)(
+ rte_pktmbuf_iova_offset(output, out_offset) >> 32);
+ desc->output_start_addr_lo = (uint32_t)(
+ rte_pktmbuf_iova_offset(output, out_offset));
+ desc->input_start_addr_hi = (uint32_t)(
+ rte_pktmbuf_iova_offset(input, in_offset) >> 32);
+ desc->input_start_addr_lo = (uint32_t)(
+ rte_pktmbuf_iova_offset(input, in_offset));
+ desc->output_length = (e + 7) >> 3; /* in bytes */
+ desc->input_length = input->data_len;
+ desc->enqueue_timestamp = 0;
+ desc->completion_timestamp = 0;
+ /* Save software context needed for dequeue */
+ desc->op_addr = op;
+ /* Set total number of CBs in an op */
+ desc->cbs_in_op = cbs_in_op;
+ return 0;
+}
+
/**
* Vista Creek 5GNR FPGA
* Set DMA descriptor for decode operation (1 Code Block)
@@ -1021,6 +1398,105 @@ vc_5gnr_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
return 0;
}
+/**
+ * AGX100 FPGA
+ * Set DMA descriptor for decode operation (1 Code Block)
+ *
+ * @param op
+ * Pointer to a single encode operation.
+ * @param desc
+ * Pointer to DMA descriptor.
+ * @param input
+ * Pointer to pointer to input data which will be decoded.
+ * @param in_offset
+ * Input offset in rte_mbuf structure. It is used for calculating the point
+ * where data is starting.
+ * @param out_offset
+ * Output offset in rte_mbuf structure. It is used for calculating the point
+ * where hard output data will be stored.
+ * @param cbs_in_op
+ * Number of CBs contained in one operation.
+ */
+static inline int
+agx100_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
+ struct agx100_dma_dec_desc *desc,
+ struct rte_mbuf *input, struct rte_mbuf *output,
+ uint16_t harq_in_length,
+ uint32_t in_offset, uint32_t out_offset,
+ uint32_t harq_in_offset,
+ uint32_t harq_out_offset,
+ uint16_t desc_offset,
+ uint8_t cbs_in_op)
+{
+ /* reset */
+ desc->done = 0;
+ desc->tb_crc_pass = 0;
+ desc->cb_crc_all_pass = 0;
+ desc->cb_all_et_pass = 0;
+ desc->max_iter_ret = 0;
+ desc->cgb_crc_bitmap = 0; /*TODO: CBG specific */
+ desc->error_msg = 0;
+ desc->error_code = 0;
+ desc->et_dis = !check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE);
+ desc->harq_in_en = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE);
+ desc->max_iter = op->ldpc_dec.iter_max;
+ desc->ncb = op->ldpc_dec.n_cb;
+ desc->bg_idx = op->ldpc_dec.basegraph - 1;
+ desc->qm_idx = op->ldpc_dec.q_m >> 1;
+ desc->zc = op->ldpc_dec.z_c;
+ desc->rv = op->ldpc_dec.rv_index;
+ desc->int_en = 0; /**< Set by device externally*/
+ desc->max_cbg = 0; /*TODO: CBG specific*/
+ desc->cbgti = 0; /*TODO: CBG specific*/
+ desc->cbgfi = 0; /*TODO: CBG specific*/
+ desc->cbgs = 0; /*TODO: CBG specific*/
+ desc->desc_idx = desc_offset;
+ desc->ca = 0; /*TODO: CBG specific*/
+ desc->c = 0; /*TODO: CBG specific*/
+ desc->llr_pckg = 0; /*TODO: Not implemented yet*/
+ desc->syndrome_check_mode = 1; /*TODO: Make it configurable*/
+ desc->num_null = op->ldpc_dec.n_filler;
+ desc->ea = op->ldpc_dec.cb_params.e; /*TODO: TB/CBG specific*/
+ desc->eba = 0; /*TODO: TB/CBG specific*/
+ desc->hbstore_offset_out = harq_out_offset >> 10;
+ desc->hbstore_offset_in = harq_in_offset >> 10;
+ desc->en_slice_ts = 0; /*TODO: Slice specific*/
+ desc->en_host_ts = 0; /*TODO: Slice specific*/
+ desc->en_cb_wr_status = 0; /*TODO: Event Queue specific*/
+ desc->en_output_sg = 0; /*TODO: Slice specific*/
+ desc->en_input_sg = 0; /*TODO: Slice specific*/
+ desc->tb_cb = 0; /* Descriptor for CB. TODO: Add TB and CBG logic*/
+ desc->crc24b_ind = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK);
+ desc->drop_crc24b = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP);
+ desc->harq_input_length_a =
+ harq_in_length; /*Descriptor for CB. TODO: Add TB and CBG logic*/
+ desc->harq_input_length_b = 0; /*Descriptor for CB. TODO: Add TB and CBG logic*/
+ /* Set inbound/outbound data buffer address */
+ /* TODO: add logic for input_slice */
+ desc->output_start_addr_hi = (uint32_t)(
+ rte_pktmbuf_iova_offset(output, out_offset) >> 32);
+ desc->output_start_addr_lo = (uint32_t)(
+ rte_pktmbuf_iova_offset(output, out_offset));
+ desc->input_start_addr_hi = (uint32_t)(
+ rte_pktmbuf_iova_offset(input, in_offset) >> 32);
+ desc->input_start_addr_lo = (uint32_t)(
+ rte_pktmbuf_iova_offset(input, in_offset));
+ desc->output_length = (((op->ldpc_dec.basegraph == 1) ? 22 : 10) * op->ldpc_dec.z_c
+ - op->ldpc_dec.n_filler - desc->drop_crc24b * 24) >> 3;
+ desc->input_length = op->ldpc_dec.cb_params.e; /*TODO: TB/CBG specific*/
+ desc->enqueue_timestamp = 0;
+ desc->completion_timestamp = 0;
+ /* Save software context needed for dequeue */
+ desc->op_addr = op;
+ /* Set total number of CBs in an op */
+ desc->cbs_in_op = cbs_in_op;
+ return 0;
+}
+
/* Validates LDPC encoder parameters for VC 5GNR FPGA. */
static inline int
vc_5gnr_validate_ldpc_enc_op(struct rte_bbdev_enc_op *op)
@@ -1484,27 +1960,35 @@ fpga_5gnr_harq_write_loopback(struct fpga_5gnr_queue *q,
uint64_t *input = NULL;
uint32_t last_transaction = left_length % FPGA_5GNR_DDR_WR_DATA_LEN_IN_BYTES;
uint64_t last_word;
+ struct fpga_5gnr_fec_device *d = q->d;
if (last_transaction > 0)
left_length -= last_transaction;
-
- /*
- * Get HARQ buffer size for each VF/PF: When 0x00, there is no
- * available DDR space for the corresponding VF/PF.
- */
- reg_32 = fpga_5gnr_reg_read_32(q->d->mmio_base, FPGA_5GNR_FEC_HARQ_BUF_SIZE_REGS);
- if (reg_32 < harq_in_length) {
- left_length = reg_32;
- rte_bbdev_log(ERR, "HARQ in length > HARQ buffer size\n");
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT) {
+ /*
+ * Get HARQ buffer size for each VF/PF: When 0x00, there is no
+ * available DDR space for the corresponding VF/PF.
+ */
+ reg_32 = fpga_5gnr_reg_read_32(q->d->mmio_base, FPGA_5GNR_FEC_HARQ_BUF_SIZE_REGS);
+ if (reg_32 < harq_in_length) {
+ left_length = reg_32;
+ rte_bbdev_log(ERR, "HARQ in length > HARQ buffer size\n");
+ }
}
input = (uint64_t *)rte_pktmbuf_mtod_offset(harq_input, uint8_t *, in_offset);
while (left_length > 0) {
if (fpga_5gnr_reg_read_8(q->d->mmio_base, FPGA_5GNR_FEC_DDR4_ADDR_RDY_REGS) == 1) {
- fpga_5gnr_reg_write_32(q->d->mmio_base,
- FPGA_5GNR_FEC_DDR4_WR_ADDR_REGS,
- out_offset);
+ if (d->fpga_variant == AGX100_FPGA_VARIANT) {
+ fpga_5gnr_reg_write_32(q->d->mmio_base,
+ FPGA_5GNR_FEC_DDR4_WR_ADDR_REGS,
+ out_offset >> 3);
+ } else {
+ fpga_5gnr_reg_write_32(q->d->mmio_base,
+ FPGA_5GNR_FEC_DDR4_WR_ADDR_REGS,
+ out_offset);
+ }
fpga_5gnr_reg_write_64(q->d->mmio_base,
FPGA_5GNR_FEC_DDR4_WR_DATA_REGS,
input[increment]);
@@ -1516,12 +2000,17 @@ fpga_5gnr_harq_write_loopback(struct fpga_5gnr_queue *q,
}
while (last_transaction > 0) {
if (fpga_5gnr_reg_read_8(q->d->mmio_base, FPGA_5GNR_FEC_DDR4_ADDR_RDY_REGS) == 1) {
- fpga_5gnr_reg_write_32(q->d->mmio_base,
- FPGA_5GNR_FEC_DDR4_WR_ADDR_REGS,
- out_offset);
+ if (d->fpga_variant == AGX100_FPGA_VARIANT) {
+ fpga_5gnr_reg_write_32(q->d->mmio_base,
+ FPGA_5GNR_FEC_DDR4_WR_ADDR_REGS,
+ out_offset >> 3);
+ } else {
+ fpga_5gnr_reg_write_32(q->d->mmio_base,
+ FPGA_5GNR_FEC_DDR4_WR_ADDR_REGS,
+ out_offset);
+ }
last_word = input[increment];
- last_word &= (uint64_t)(1 << (last_transaction * 4))
- - 1;
+ last_word &= (uint64_t)(1ULL << (last_transaction * 4)) - 1;
fpga_5gnr_reg_write_64(q->d->mmio_base,
FPGA_5GNR_FEC_DDR4_WR_DATA_REGS,
last_word);
@@ -1544,14 +2033,17 @@ fpga_5gnr_harq_read_loopback(struct fpga_5gnr_queue *q,
uint32_t increment = 0;
uint64_t *input = NULL;
uint32_t last_transaction = harq_in_length % FPGA_5GNR_DDR_WR_DATA_LEN_IN_BYTES;
+ struct fpga_5gnr_fec_device *d = q->d;
if (last_transaction > 0)
harq_in_length += (8 - last_transaction);
- reg = fpga_5gnr_reg_read_32(q->d->mmio_base, FPGA_5GNR_FEC_HARQ_BUF_SIZE_REGS);
- if (reg < harq_in_length) {
- harq_in_length = reg;
- rte_bbdev_log(ERR, "HARQ in length > HARQ buffer size\n");
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT) {
+ reg = fpga_5gnr_reg_read_32(q->d->mmio_base, FPGA_5GNR_FEC_HARQ_BUF_SIZE_REGS);
+ if (reg < harq_in_length) {
+ harq_in_length = reg;
+ rte_bbdev_log(ERR, "HARQ in length > HARQ buffer size\n");
+ }
}
if (!mbuf_append(harq_output, harq_output, harq_in_length)) {
@@ -1570,9 +2062,15 @@ fpga_5gnr_harq_read_loopback(struct fpga_5gnr_queue *q,
input = (uint64_t *)rte_pktmbuf_mtod_offset(harq_output, uint8_t *, harq_out_offset);
while (left_length > 0) {
- fpga_5gnr_reg_write_32(q->d->mmio_base,
- FPGA_5GNR_FEC_DDR4_RD_ADDR_REGS,
- in_offset);
+ if (d->fpga_variant == AGX100_FPGA_VARIANT) {
+ fpga_5gnr_reg_write_32(q->d->mmio_base,
+ FPGA_5GNR_FEC_DDR4_RD_ADDR_REGS,
+ in_offset >> 3);
+ } else {
+ fpga_5gnr_reg_write_32(q->d->mmio_base,
+ FPGA_5GNR_FEC_DDR4_RD_ADDR_REGS,
+ in_offset);
+ }
fpga_5gnr_reg_write_8(q->d->mmio_base, FPGA_5GNR_FEC_DDR4_RD_DONE_REGS, 1);
reg = fpga_5gnr_reg_read_8(q->d->mmio_base, FPGA_5GNR_FEC_DDR4_RD_RDY_REGS);
while (reg != 1) {
@@ -1587,7 +2085,10 @@ fpga_5gnr_harq_read_loopback(struct fpga_5gnr_queue *q,
left_length -= FPGA_5GNR_DDR_RD_DATA_LEN_IN_BYTES;
in_offset += FPGA_5GNR_DDR_WR_DATA_LEN_IN_BYTES;
increment++;
- fpga_5gnr_reg_write_8(q->d->mmio_base, FPGA_5GNR_FEC_DDR4_RD_DONE_REGS, 0);
+ if (d->fpga_variant == AGX100_FPGA_VARIANT)
+ fpga_5gnr_reg_write_8(q->d->mmio_base, FPGA_5GNR_FEC_DDR4_RD_RDY_REGS, 0);
+ else
+ fpga_5gnr_reg_write_8(q->d->mmio_base, FPGA_5GNR_FEC_DDR4_RD_DONE_REGS, 0);
}
fpga_5gnr_mutex_free(q);
return 1;
@@ -1598,6 +2099,7 @@ enqueue_ldpc_enc_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_enc_op *o
uint16_t desc_offset)
{
union vc_5gnr_dma_desc *vc_5gnr_desc;
+ union agx100_dma_desc *agx100_desc;
int ret;
uint8_t c, crc24_bits = 0;
struct rte_bbdev_op_ldpc_enc *enc = &op->ldpc_enc;
@@ -1610,10 +2112,13 @@ enqueue_ldpc_enc_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_enc_op *o
uint16_t total_left = enc->input.length;
uint16_t ring_offset;
uint16_t K, k_;
+ struct fpga_5gnr_fec_device *d = q->d;
- if (vc_5gnr_validate_ldpc_enc_op(op) == -1) {
- rte_bbdev_log(ERR, "LDPC encoder validation rejected");
- return -EINVAL;
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT) {
+ if (vc_5gnr_validate_ldpc_enc_op(op) == -1) {
+ rte_bbdev_log(ERR, "LDPC encoder validation rejected");
+ return -EINVAL;
+ }
}
/* Clear op status */
@@ -1629,14 +2134,13 @@ enqueue_ldpc_enc_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_enc_op *o
crc24_bits = 24;
if (enc->code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK) {
- /* For Transport Block mode */
- /* FIXME */
- c = enc->tb_params.c;
- e = enc->tb_params.ea;
- } else { /* For Code Block mode */
- c = 1;
- e = enc->cb_params.e;
+ /* TODO: For Transport Block mode */
+ rte_bbdev_log(ERR, "Transport Block not supported yet");
+ return -1;
}
+ /* For Code Block mode */
+ c = 1;
+ e = enc->cb_params.e;
/* Update total_left */
K = (enc->basegraph == 1 ? 22 : 10) * enc->z_c;
@@ -1658,10 +2162,19 @@ enqueue_ldpc_enc_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_enc_op *o
/* Offset into the ring */
ring_offset = ((q->tail + desc_offset) & q->sw_ring_wrap_mask);
- /* Setup DMA Descriptor */
- vc_5gnr_desc = q->vc_5gnr_ring_addr + ring_offset;
- ret = vc_5gnr_dma_desc_te_fill(op, &vc_5gnr_desc->vc_5gnr_enc_req, m_in, m_out,
- k_, e, in_offset, out_offset, ring_offset, c);
+
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT) {
+ /* Setup DMA Descriptor */
+ vc_5gnr_desc = q->vc_5gnr_ring_addr + ring_offset;
+ ret = vc_5gnr_dma_desc_te_fill(op, &vc_5gnr_desc->vc_5gnr_enc_req, m_in, m_out,
+ k_, e, in_offset, out_offset, ring_offset, c);
+ } else {
+ /* Setup DMA Descriptor */
+ agx100_desc = q->agx100_ring_addr + ring_offset;
+ ret = agx100_dma_desc_le_fill(op, &agx100_desc->agx100_enc_req, m_in, m_out,
+ k_, e, in_offset, out_offset, ring_offset, c);
+ }
+
if (unlikely(ret < 0))
return ret;
@@ -1677,7 +2190,10 @@ enqueue_ldpc_enc_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_enc_op *o
}
#ifdef RTE_LIBRTE_BBDEV_DEBUG
- vc_5gnr_print_dma_enc_desc_debug_info(vc_5gnr_desc);
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT)
+ vc_5gnr_print_dma_enc_desc_debug_info(vc_5gnr_desc);
+ else
+ agx100_print_dma_enc_desc_debug_info(agx100_desc);
#endif
return 1;
}
@@ -1817,50 +2333,180 @@ vc_5gnr_enqueue_ldpc_dec_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_d
return 1;
}
-static uint16_t
-fpga_5gnr_enqueue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
- struct rte_bbdev_enc_op **ops, uint16_t num)
+static inline int
+agx100_enqueue_ldpc_dec_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_dec_op *op,
+ uint16_t desc_offset)
{
- uint16_t i, total_enqueued_cbs = 0;
- int32_t avail;
- int enqueued_cbs;
- struct fpga_5gnr_queue *q = q_data->queue_private;
- union vc_5gnr_dma_desc *vc_5gnr_desc;
-
- /* Check if queue is not full */
- if (unlikely(((q->tail + 1) & q->sw_ring_wrap_mask) == q->head_free_desc))
- return 0;
-
- /* Calculates available space */
- avail = (q->head_free_desc > q->tail) ?
- q->head_free_desc - q->tail - 1 :
- q->ring_ctrl_reg.ring_size + q->head_free_desc - q->tail - 1;
+ union agx100_dma_desc *desc;
+ int ret;
+ uint16_t ring_offset;
+ uint8_t c;
+ uint16_t e, in_length, out_length, k0, l, seg_total_left, sys_cols;
+ uint16_t K, parity_offset, harq_in_length = 0, harq_out_length = 0;
+ uint16_t crc24_overlap = 0;
+ struct rte_bbdev_op_ldpc_dec *dec = &op->ldpc_dec;
+ struct rte_mbuf *m_in = dec->input.data;
+ struct rte_mbuf *m_out = dec->hard_output.data;
+ struct rte_mbuf *m_out_head = dec->hard_output.data;
+ uint16_t in_offset = dec->input.offset;
+ uint16_t out_offset = dec->hard_output.offset;
+ uint32_t harq_in_offset = 0;
+ uint32_t harq_out_offset = 0;
- for (i = 0; i < num; ++i) {
- /* Check if there is available space for further
- * processing
- */
- if (unlikely(avail - 1 < 0))
- break;
- avail -= 1;
- enqueued_cbs = enqueue_ldpc_enc_one_op_cb(q, ops[i], total_enqueued_cbs);
+ /* Clear op status */
+ op->status = 0;
- if (enqueued_cbs < 0)
- break;
+ /* Setup DMA Descriptor */
+ ring_offset = ((q->tail + desc_offset) & q->sw_ring_wrap_mask);
+ desc = q->agx100_ring_addr + ring_offset;
- total_enqueued_cbs += enqueued_cbs;
+ if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK)) {
+ struct rte_mbuf *harq_in = dec->harq_combined_input.data;
+ struct rte_mbuf *harq_out = dec->harq_combined_output.data;
+ harq_in_length = dec->harq_combined_input.length;
+ uint32_t harq_in_offset = dec->harq_combined_input.offset;
+ uint32_t harq_out_offset = dec->harq_combined_output.offset;
- rte_bbdev_log_debug("enqueuing enc ops [%d/%d] | head %d | tail %d",
- total_enqueued_cbs, num,
- q->head_free_desc, q->tail);
- }
+ if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE)) {
+ ret = fpga_5gnr_harq_write_loopback(q, harq_in,
+ harq_in_length, harq_in_offset,
+ harq_out_offset);
+ } else if (check_bit(dec->op_flags,
+ RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE)) {
+ ret = fpga_5gnr_harq_read_loopback(q, harq_out,
+ harq_in_length, harq_in_offset,
+ harq_out_offset);
+ dec->harq_combined_output.length = harq_in_length;
+ } else {
+ rte_bbdev_log(ERR, "OP flag Err!");
+ ret = -1;
+ }
+
+ /* Set descriptor for dequeue */
+ desc->agx100_dec_req.done = 1;
+ desc->agx100_dec_req.error_code = 0;
+ desc->agx100_dec_req.error_msg = 0;
+ desc->agx100_dec_req.op_addr = op;
+ desc->agx100_dec_req.cbs_in_op = 1;
+
+ /* Mark this dummy descriptor to be dropped by HW */
+ desc->agx100_dec_req.desc_idx = (ring_offset + 1) & q->sw_ring_wrap_mask;
+
+ return ret; /* Error or number of CB */
+ }
+
+ if (m_in == NULL || m_out == NULL) {
+ rte_bbdev_log(ERR, "Invalid mbuf pointer");
+ op->status = 1 << RTE_BBDEV_DATA_ERROR;
+ return -1;
+ }
+
+ c = 1;
+ e = dec->cb_params.e;
+
+ if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP))
+ crc24_overlap = 24;
+
+ sys_cols = (dec->basegraph == 1) ? 22 : 10;
+ K = sys_cols * dec->z_c;
+ parity_offset = K - 2 * dec->z_c;
+
+ out_length = ((K - crc24_overlap - dec->n_filler) >> 3);
+ in_length = e;
+ seg_total_left = dec->input.length;
+
+ if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE))
+ harq_in_length = RTE_MIN(dec->harq_combined_input.length, (uint32_t)dec->n_cb);
+
+ if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE)) {
+ k0 = get_k0(dec->n_cb, dec->z_c, dec->basegraph, dec->rv_index);
+ if (k0 > parity_offset)
+ l = k0 + e;
+ else
+ l = k0 + e + dec->n_filler;
+ harq_out_length = RTE_MIN(RTE_MAX(harq_in_length, l), dec->n_cb);
+ dec->harq_combined_output.length = harq_out_length;
+ }
+
+ mbuf_append(m_out_head, m_out, out_length);
+ harq_in_offset = dec->harq_combined_input.offset;
+ harq_out_offset = dec->harq_combined_output.offset;
+
+ ret = agx100_dma_desc_ld_fill(op, &desc->agx100_dec_req, m_in, m_out,
+ harq_in_length, in_offset, out_offset, harq_in_offset,
+ harq_out_offset, ring_offset, c);
+
+ if (unlikely(ret < 0))
+ return ret;
+ /* Update lengths */
+ seg_total_left -= in_length;
+ op->ldpc_dec.hard_output.length += out_length;
+ if (seg_total_left > 0) {
+ rte_bbdev_log(ERR,
+ "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
+ seg_total_left, in_length);
+ return -1;
+ }
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ agx100_print_dma_dec_desc_debug_info(desc);
+#endif
+
+ return 1;
+}
+
+static uint16_t
+fpga_5gnr_enqueue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
+ struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+ uint16_t i, total_enqueued_cbs = 0;
+ int32_t avail;
+ int enqueued_cbs;
+ struct fpga_5gnr_queue *q = q_data->queue_private;
+ union vc_5gnr_dma_desc *vc_5gnr_desc;
+ union agx100_dma_desc *agx100_desc;
+ struct fpga_5gnr_fec_device *d = q->d;
+
+ /* Check if queue is not full */
+ if (unlikely(((q->tail + 1) & q->sw_ring_wrap_mask) == q->head_free_desc))
+ return 0;
+
+ /* Calculates available space */
+ avail = (q->head_free_desc > q->tail) ?
+ q->head_free_desc - q->tail - 1 :
+ q->ring_ctrl_reg.ring_size + q->head_free_desc - q->tail - 1;
+
+ for (i = 0; i < num; ++i) {
+ /* Check if there is available space for further
+ * processing
+ */
+ if (unlikely(avail - 1 < 0))
+ break;
+ avail -= 1;
+ enqueued_cbs = enqueue_ldpc_enc_one_op_cb(q, ops[i], total_enqueued_cbs);
+
+ if (enqueued_cbs < 0)
+ break;
+
+ total_enqueued_cbs += enqueued_cbs;
+
+ rte_bbdev_log_debug("enqueuing enc ops [%d/%d] | head %d | tail %d",
+ total_enqueued_cbs, num,
+ q->head_free_desc, q->tail);
+ }
/* Set interrupt bit for last CB in enqueued ops. FPGA issues interrupt
* only when all previous CBs were already processed.
*/
- vc_5gnr_desc = q->vc_5gnr_ring_addr +
- ((q->tail + total_enqueued_cbs - 1) & q->sw_ring_wrap_mask);
- vc_5gnr_desc->vc_5gnr_enc_req.irq_en = q->irq_enable;
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT) {
+ vc_5gnr_desc = q->vc_5gnr_ring_addr +
+ ((q->tail + total_enqueued_cbs - 1) & q->sw_ring_wrap_mask);
+ vc_5gnr_desc->vc_5gnr_enc_req.irq_en = q->irq_enable;
+ } else {
+ agx100_desc = q->agx100_ring_addr +
+ ((q->tail + total_enqueued_cbs - 1) & q->sw_ring_wrap_mask);
+ agx100_desc->agx100_enc_req.int_en = q->irq_enable;
+ }
fpga_5gnr_dma_enqueue(q, total_enqueued_cbs, &q_data->queue_stats);
@@ -1880,6 +2526,8 @@ fpga_5gnr_enqueue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
int enqueued_cbs;
struct fpga_5gnr_queue *q = q_data->queue_private;
union vc_5gnr_dma_desc *vc_5gnr_desc;
+ union agx100_dma_desc *agx100_desc;
+ struct fpga_5gnr_fec_device *d = q->d;
/* Check if queue is not full */
if (unlikely(((q->tail + 1) & q->sw_ring_wrap_mask) == q->head_free_desc))
@@ -1898,8 +2546,13 @@ fpga_5gnr_enqueue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
if (unlikely(avail - 1 < 0))
break;
avail -= 1;
- enqueued_cbs = vc_5gnr_enqueue_ldpc_dec_one_op_cb(q, ops[i],
- total_enqueued_cbs);
+ if (q->d->fpga_variant == VC_5GNR_FPGA_VARIANT) {
+ enqueued_cbs = vc_5gnr_enqueue_ldpc_dec_one_op_cb(q, ops[i],
+ total_enqueued_cbs);
+ } else {
+ enqueued_cbs = agx100_enqueue_ldpc_dec_one_op_cb(q, ops[i],
+ total_enqueued_cbs);
+ }
if (enqueued_cbs < 0)
break;
@@ -1918,9 +2571,16 @@ fpga_5gnr_enqueue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
/* Set interrupt bit for last CB in enqueued ops. FPGA issues interrupt
* only when all previous CBs were already processed.
*/
- vc_5gnr_desc = q->vc_5gnr_ring_addr +
- ((q->tail + total_enqueued_cbs - 1) & q->sw_ring_wrap_mask);
- vc_5gnr_desc->vc_5gnr_enc_req.irq_en = q->irq_enable;
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT) {
+ vc_5gnr_desc = q->vc_5gnr_ring_addr +
+ ((q->tail + total_enqueued_cbs - 1) & q->sw_ring_wrap_mask);
+ vc_5gnr_desc->vc_5gnr_enc_req.irq_en = q->irq_enable;
+ } else {
+ agx100_desc = q->agx100_ring_addr +
+ ((q->tail + total_enqueued_cbs - 1) & q->sw_ring_wrap_mask);
+ agx100_desc->agx100_enc_req.int_en = q->irq_enable;
+ }
+
fpga_5gnr_dma_enqueue(q, total_enqueued_cbs, &q_data->queue_stats);
return i;
}
@@ -1955,6 +2615,36 @@ vc_5gnr_dequeue_ldpc_enc_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_e
return 1;
}
+static inline int
+agx100_dequeue_ldpc_enc_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_enc_op **op,
+ uint16_t desc_offset)
+{
+ union agx100_dma_desc *desc;
+ int desc_error;
+
+ /* Set current desc */
+ desc = q->agx100_ring_addr + ((q->head_free_desc + desc_offset) & q->sw_ring_wrap_mask);
+ /*check if done */
+ if (desc->agx100_enc_req.done == 0)
+ return -1;
+
+ /* make sure the response is read atomically */
+ rte_smp_rmb();
+
+ rte_bbdev_log_debug("DMA response desc %p", desc);
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ agx100_print_dma_enc_desc_debug_info(desc);
+#endif
+ *op = desc->agx100_enc_req.op_addr;
+ /* Check the descriptor error field, return 1 on error */
+ desc_error = agx100_check_desc_error(desc->agx100_enc_req.error_code,
+ desc->agx100_enc_req.error_msg);
+
+ (*op)->status = desc_error << RTE_BBDEV_DATA_ERROR;
+
+ return 1;
+}
static inline int
vc_5gnr_dequeue_ldpc_dec_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_dec_op **op,
@@ -2003,6 +2693,52 @@ vc_5gnr_dequeue_ldpc_dec_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_d
return 1;
}
+static inline int
+agx100_dequeue_ldpc_dec_one_op_cb(struct fpga_5gnr_queue *q, struct rte_bbdev_dec_op **op,
+ uint16_t desc_offset)
+{
+ union agx100_dma_desc *desc;
+ int desc_error;
+
+ /* Set descriptor */
+ desc = q->agx100_ring_addr +
+ ((q->head_free_desc + desc_offset) & q->sw_ring_wrap_mask);
+ /* Verify done bit is set */
+ if (desc->agx100_dec_req.done == 0)
+ return -1;
+
+ /* make sure the response is read atomically */
+ rte_smp_rmb();
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ agx100_print_dma_dec_desc_debug_info(desc);
+#endif
+
+ *op = desc->agx100_dec_req.op_addr;
+
+ if (check_bit((*op)->ldpc_dec.op_flags, RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK)) {
+ (*op)->status = 0;
+ return 1;
+ }
+
+ /* FPGA reports iterations based on round-up minus 1 */
+ (*op)->ldpc_dec.iter_count = desc->agx100_dec_req.max_iter_ret + 1;
+
+ /* CRC Check criteria */
+ if (desc->agx100_dec_req.crc24b_ind && !(desc->agx100_dec_req.cb_crc_all_pass))
+ (*op)->status = 1 << RTE_BBDEV_CRC_ERROR;
+
+ /* et_pass = 0 when decoder fails */
+ (*op)->status |= !(desc->agx100_dec_req.cb_all_et_pass) << RTE_BBDEV_SYNDROME_ERROR;
+
+ /* Check the descriptor error field, return 1 on error */
+ desc_error = agx100_check_desc_error(desc->agx100_dec_req.error_code,
+ desc->agx100_dec_req.error_msg);
+
+ (*op)->status |= desc_error << RTE_BBDEV_DATA_ERROR;
+ return 1;
+}
+
static uint16_t
fpga_5gnr_dequeue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
struct rte_bbdev_enc_op **ops, uint16_t num)
@@ -2014,7 +2750,10 @@ fpga_5gnr_dequeue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
int ret;
for (i = 0; (i < num) && (dequeued_cbs < avail); ++i) {
- ret = vc_5gnr_dequeue_ldpc_enc_one_op_cb(q, &ops[i], dequeued_cbs);
+ if (q->d->fpga_variant == VC_5GNR_FPGA_VARIANT)
+ ret = vc_5gnr_dequeue_ldpc_enc_one_op_cb(q, &ops[i], dequeued_cbs);
+ else
+ ret = agx100_dequeue_ldpc_enc_one_op_cb(q, &ops[i], dequeued_cbs);
if (ret < 0)
break;
@@ -2046,7 +2785,10 @@ fpga_5gnr_dequeue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
int ret;
for (i = 0; (i < num) && (dequeued_cbs < avail); ++i) {
- ret = vc_5gnr_dequeue_ldpc_dec_one_op_cb(q, &ops[i], dequeued_cbs);
+ if (q->d->fpga_variant == VC_5GNR_FPGA_VARIANT)
+ ret = vc_5gnr_dequeue_ldpc_dec_one_op_cb(q, &ops[i], dequeued_cbs);
+ else
+ ret = agx100_dequeue_ldpc_dec_one_op_cb(q, &ops[i], dequeued_cbs);
if (ret < 0)
break;
@@ -2079,10 +2821,29 @@ fpga_5gnr_fec_init(struct rte_bbdev *dev, struct rte_pci_driver *drv)
dev->dequeue_ldpc_enc_ops = fpga_5gnr_dequeue_ldpc_enc;
dev->dequeue_ldpc_dec_ops = fpga_5gnr_dequeue_ldpc_dec;
- ((struct fpga_5gnr_fec_device *) dev->data->dev_private)->pf_device =
- !strcmp(drv->driver.name, RTE_STR(FPGA_5GNR_FEC_PF_DRIVER_NAME));
- ((struct fpga_5gnr_fec_device *) dev->data->dev_private)->mmio_base =
- pci_dev->mem_resource[0].addr;
+ /* Device variant specific handling */
+ if ((pci_dev->id.device_id == AGX100_PF_DEVICE_ID) ||
+ (pci_dev->id.device_id == AGX100_VF_DEVICE_ID)) {
+ ((struct fpga_5gnr_fec_device *) dev->data->dev_private)->fpga_variant =
+ AGX100_FPGA_VARIANT;
+ ((struct fpga_5gnr_fec_device *) dev->data->dev_private)->pf_device =
+ !strcmp(drv->driver.name, RTE_STR(FPGA_5GNR_FEC_PF_DRIVER_NAME));
+ ((struct fpga_5gnr_fec_device *) dev->data->dev_private)->mmio_base =
+ pci_dev->mem_resource[0].addr;
+ /* Maximum number of queues possible for this device */
+ ((struct fpga_5gnr_fec_device *) dev->data->dev_private)->total_num_queues =
+ fpga_5gnr_reg_read_32(pci_dev->mem_resource[0].addr,
+ FPGA_5GNR_FEC_VERSION_ID) >> 24;
+ } else {
+ ((struct fpga_5gnr_fec_device *) dev->data->dev_private)->fpga_variant =
+ VC_5GNR_FPGA_VARIANT;
+ ((struct fpga_5gnr_fec_device *) dev->data->dev_private)->pf_device =
+ !strcmp(drv->driver.name, RTE_STR(FPGA_5GNR_FEC_PF_DRIVER_NAME));
+ ((struct fpga_5gnr_fec_device *) dev->data->dev_private)->mmio_base =
+ pci_dev->mem_resource[0].addr;
+ ((struct fpga_5gnr_fec_device *) dev->data->dev_private)->total_num_queues =
+ VC_5GNR_TOTAL_NUM_QUEUES;
+ }
rte_bbdev_log_debug(
"Init device %s [%s] @ virtaddr %p phyaddr %#"PRIx64,
@@ -2097,6 +2858,7 @@ fpga_5gnr_fec_probe(struct rte_pci_driver *pci_drv,
{
struct rte_bbdev *bbdev = NULL;
char dev_name[RTE_BBDEV_NAME_MAX_LEN];
+ struct fpga_5gnr_fec_device *d;
if (pci_dev == NULL) {
rte_bbdev_log(ERR, "NULL PCI device");
@@ -2135,15 +2897,24 @@ fpga_5gnr_fec_probe(struct rte_pci_driver *pci_drv,
rte_bbdev_log_debug("bbdev id = %u [%s]",
bbdev->data->dev_id, dev_name);
- struct fpga_5gnr_fec_device *d = bbdev->data->dev_private;
- uint32_t version_id = fpga_5gnr_reg_read_32(d->mmio_base, FPGA_5GNR_FEC_VERSION_ID);
- rte_bbdev_log(INFO, "Vista Creek FPGA RTL v%u.%u",
- ((uint16_t)(version_id >> 16)), ((uint16_t)version_id));
+ d = bbdev->data->dev_private;
+ if (d->fpga_variant == VC_5GNR_FPGA_VARIANT) {
+ uint32_t version_id = fpga_5gnr_reg_read_32(d->mmio_base, FPGA_5GNR_FEC_VERSION_ID);
+ rte_bbdev_log(INFO, "Vista Creek FPGA RTL v%u.%u",
+ ((uint16_t)(version_id >> 16)), ((uint16_t)version_id));
+ } else {
+ uint32_t version_num_queues = fpga_5gnr_reg_read_32(d->mmio_base,
+ FPGA_5GNR_FEC_VERSION_ID);
+ uint8_t major_version_id = version_num_queues >> 16;
+ uint8_t minor_version_id = version_num_queues >> 8;
+ uint8_t patch_id = version_num_queues;
+
+ rte_bbdev_log(INFO, "AGX100 RTL v%u.%u.%u",
+ major_version_id, minor_version_id, patch_id);
+ }
#ifdef RTE_LIBRTE_BBDEV_DEBUG
- if (!strcmp(pci_drv->driver.name,
- RTE_STR(FPGA_5GNR_FEC_PF_DRIVER_NAME)))
- print_static_reg_debug_info(d->mmio_base);
+ print_static_reg_debug_info(d->mmio_base, d->fpga_variant);
#endif
return 0;
}
@@ -2242,7 +3013,7 @@ static int vc_5gnr_configure(const char *dev_name, const struct rte_fpga_5gnr_fe
/* Clear all queues registers */
payload_32 = FPGA_5GNR_INVALID_HW_QUEUE_ID;
- for (q_id = 0; q_id < VC_5GNR_TOTAL_NUM_QUEUES; ++q_id) {
+ for (q_id = 0; q_id < d->total_num_queues; ++q_id) {
address = (q_id << 2) + VC_5GNR_QUEUE_MAP;
fpga_5gnr_reg_write_32(d->mmio_base, address, payload_32);
}
@@ -2303,7 +3074,7 @@ static int vc_5gnr_configure(const char *dev_name, const struct rte_fpga_5gnr_fe
*/
if (conf->pf_mode_en) {
payload_32 = 0x1;
- for (q_id = 0; q_id < VC_5GNR_TOTAL_NUM_QUEUES; ++q_id) {
+ for (q_id = 0; q_id < d->total_num_queues; ++q_id) {
address = (q_id << 2) + VC_5GNR_QUEUE_MAP;
fpga_5gnr_reg_write_32(d->mmio_base, address, payload_32);
}
@@ -2321,11 +3092,11 @@ static int vc_5gnr_configure(const char *dev_name, const struct rte_fpga_5gnr_fe
*/
if ((total_ul_q_id > VC_5GNR_NUM_UL_QUEUES) ||
(total_dl_q_id > VC_5GNR_NUM_DL_QUEUES) ||
- (total_q_id > VC_5GNR_TOTAL_NUM_QUEUES)) {
+ (total_q_id > d->total_num_queues)) {
rte_bbdev_log(ERR,
"VC 5GNR FPGA Configuration failed. Too many queues to configure: UL_Q %u, DL_Q %u, FPGA_Q %u",
total_ul_q_id, total_dl_q_id,
- VC_5GNR_TOTAL_NUM_QUEUES);
+ d->total_num_queues);
return -EINVAL;
}
total_ul_q_id = 0;
@@ -2369,7 +3140,169 @@ static int vc_5gnr_configure(const char *dev_name, const struct rte_fpga_5gnr_fe
rte_bbdev_log_debug("PF Vista Creek 5GNR FPGA configuration complete for %s", dev_name);
#ifdef RTE_LIBRTE_BBDEV_DEBUG
- print_static_reg_debug_info(d->mmio_base);
+ print_static_reg_debug_info(d->mmio_base, d->fpga_variant);
+#endif
+ return 0;
+}
+
+/* Initial configuration of AGX100 device */
+static int agx100_configure(const char *dev_name, const struct rte_fpga_5gnr_fec_conf *conf)
+{
+ uint32_t payload_32, address;
+ uint16_t payload_16;
+ uint8_t payload_8;
+ uint16_t q_id, vf_id, total_q_id, total_ul_q_id, total_dl_q_id;
+ struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
+ struct rte_fpga_5gnr_fec_conf def_conf;
+
+ if (bbdev == NULL) {
+ rte_bbdev_log(ERR,
+ "Invalid dev_name (%s), or device is not yet initialised",
+ dev_name);
+ return -ENODEV;
+ }
+
+ struct fpga_5gnr_fec_device *d = bbdev->data->dev_private;
+
+ if (conf == NULL) {
+ rte_bbdev_log(ERR, "AGX100 Configuration was not provided.");
+ rte_bbdev_log(ERR, "Default configuration will be loaded.");
+ fpga_5gnr_set_default_conf(&def_conf);
+ conf = &def_conf;
+ }
+
+ uint8_t total_num_queues = d->total_num_queues;
+ uint8_t num_ul_queues = total_num_queues >> 1;
+ uint8_t num_dl_queues = total_num_queues >> 1;
+
+ /* Clear all queues registers */
+ payload_32 = FPGA_5GNR_INVALID_HW_QUEUE_ID;
+ for (q_id = 0; q_id < total_num_queues; ++q_id) {
+ address = (q_id << 2) + AGX100_QUEUE_MAP;
+ fpga_5gnr_reg_write_32(d->mmio_base, address, payload_32);
+ }
+
+ /*
+ * If PF mode is enabled allocate all queues for PF only.
+ *
+ * For VF mode each VF can have different number of UL and DL queues.
+ * Total number of queues to configure cannot exceed AGX100
+ * capabilities - 64 queues - 32 queues for UL and 32 queues for DL.
+ * Queues mapping is done according to configuration:
+ *
+ * UL queues:
+ * | Q_ID | VF_ID |
+ * | 0 | 0 |
+ * | ... | 0 |
+ * | conf->vf_dl_queues_number[0] - 1 | 0 |
+ * | conf->vf_dl_queues_number[0] | 1 |
+ * | ... | 1 |
+ * | conf->vf_dl_queues_number[1] - 1 | 1 |
+ * | ... | ... |
+ * | conf->vf_dl_queues_number[7] - 1 | 7 |
+ *
+ * DL queues:
+ * | Q_ID | VF_ID |
+ * | 32 | 0 |
+ * | ... | 0 |
+ * | conf->vf_ul_queues_number[0] - 1 | 0 |
+ * | conf->vf_ul_queues_number[0] | 1 |
+ * | ... | 1 |
+ * | conf->vf_ul_queues_number[1] - 1 | 1 |
+ * | ... | ... |
+ * | conf->vf_ul_queues_number[7] - 1 | 7 |
+ *
+ * Example of configuration:
+ * conf->vf_ul_queues_number[0] = 4; -> 4 UL queues for VF0
+ * conf->vf_dl_queues_number[0] = 4; -> 4 DL queues for VF0
+ * conf->vf_ul_queues_number[1] = 2; -> 2 UL queues for VF1
+ * conf->vf_dl_queues_number[1] = 2; -> 2 DL queues for VF1
+ *
+ * UL:
+ * | Q_ID | VF_ID |
+ * | 0 | 0 |
+ * | 1 | 0 |
+ * | 2 | 0 |
+ * | 3 | 0 |
+ * | 4 | 1 |
+ * | 5 | 1 |
+ *
+ * DL:
+ * | Q_ID | VF_ID |
+ * | 32 | 0 |
+ * | 33 | 0 |
+ * | 34 | 0 |
+ * | 35 | 0 |
+ * | 36 | 1 |
+ * | 37 | 1 |
+ */
+ if (conf->pf_mode_en) {
+ payload_32 = 0x1;
+ for (q_id = 0; q_id < total_num_queues; ++q_id) {
+ address = (q_id << 2) + AGX100_QUEUE_MAP;
+ fpga_5gnr_reg_write_32(d->mmio_base, address, payload_32);
+ }
+ } else {
+ /* Calculate total number of UL and DL queues to configure */
+ total_ul_q_id = total_dl_q_id = 0;
+ for (vf_id = 0; vf_id < FPGA_5GNR_FEC_NUM_VFS; ++vf_id) {
+ total_ul_q_id += conf->vf_ul_queues_number[vf_id];
+ total_dl_q_id += conf->vf_dl_queues_number[vf_id];
+ }
+ total_q_id = total_dl_q_id + total_ul_q_id;
+ /*
+ * Check if total number of queues to configure does not exceed
+ * AGX100 capabilities (64 queues - 32 UL and 32 DL queues)
+ */
+ if ((total_ul_q_id > num_ul_queues) ||
+ (total_dl_q_id > num_dl_queues) ||
+ (total_q_id > total_num_queues)) {
+ rte_bbdev_log(ERR,
+ "AGX100 Configuration failed. Too many queues to configure: UL_Q %u, DL_Q %u, AGX100_Q %u",
+ total_ul_q_id, total_dl_q_id,
+ total_num_queues);
+ return -EINVAL;
+ }
+ total_ul_q_id = 0;
+ for (vf_id = 0; vf_id < FPGA_5GNR_FEC_NUM_VFS; ++vf_id) {
+ for (q_id = 0; q_id < conf->vf_ul_queues_number[vf_id];
+ ++q_id, ++total_ul_q_id) {
+ address = (total_ul_q_id << 2) + AGX100_QUEUE_MAP;
+ payload_32 = ((0x80 + vf_id) << 16) | 0x1;
+ fpga_5gnr_reg_write_32(d->mmio_base, address, payload_32);
+ }
+ }
+ total_dl_q_id = 0;
+ for (vf_id = 0; vf_id < FPGA_5GNR_FEC_NUM_VFS; ++vf_id) {
+ for (q_id = 0; q_id < conf->vf_dl_queues_number[vf_id];
+ ++q_id, ++total_dl_q_id) {
+ address = ((total_dl_q_id + num_ul_queues)
+ << 2) + AGX100_QUEUE_MAP;
+ payload_32 = ((0x80 + vf_id) << 16) | 0x1;
+ fpga_5gnr_reg_write_32(d->mmio_base, address, payload_32);
+ }
+ }
+ }
+
+ /* Setting Load Balance Factor */
+ payload_16 = (conf->dl_load_balance << 8) | (conf->ul_load_balance);
+ address = FPGA_5GNR_FEC_LOAD_BALANCE_FACTOR;
+ fpga_5gnr_reg_write_16(d->mmio_base, address, payload_16);
+
+ /* Setting length of ring descriptor entry */
+ payload_16 = FPGA_5GNR_RING_DESC_ENTRY_LENGTH;
+ address = FPGA_5GNR_FEC_RING_DESC_LEN;
+ fpga_5gnr_reg_write_16(d->mmio_base, address, payload_16);
+
+ /* Queue PF/VF mapping table is ready */
+ payload_8 = 0x1;
+ address = FPGA_5GNR_FEC_QUEUE_PF_VF_MAP_DONE;
+ fpga_5gnr_reg_write_8(d->mmio_base, address, payload_8);
+
+ rte_bbdev_log_debug("PF AGX100 configuration complete for %s", dev_name);
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ print_static_reg_debug_info(d->mmio_base, d->fpga_variant);
#endif
return 0;
}
@@ -2386,6 +3319,8 @@ int rte_fpga_5gnr_fec_configure(const char *dev_name, const struct rte_fpga_5gnr
printf("Configure dev id %x\n", pci_dev->id.device_id);
if (pci_dev->id.device_id == VC_5GNR_PF_DEVICE_ID)
return vc_5gnr_configure(dev_name, conf);
+ else if (pci_dev->id.device_id == AGX100_PF_DEVICE_ID)
+ return agx100_configure(dev_name, conf);
rte_bbdev_log(ERR, "Invalid device_id (%d)", pci_dev->id.device_id);
return -ENODEV;
@@ -2393,6 +3328,9 @@ int rte_fpga_5gnr_fec_configure(const char *dev_name, const struct rte_fpga_5gnr
/* FPGA 5GNR FEC PCI PF address map */
static struct rte_pci_id pci_id_fpga_5gnr_fec_pf_map[] = {
+ {
+ RTE_PCI_DEVICE(AGX100_VENDOR_ID, AGX100_PF_DEVICE_ID)
+ },
{
RTE_PCI_DEVICE(VC_5GNR_VENDOR_ID, VC_5GNR_PF_DEVICE_ID)
},
@@ -2408,6 +3346,9 @@ static struct rte_pci_driver fpga_5gnr_fec_pci_pf_driver = {
/* FPGA 5GNR FEC PCI VF address map */
static struct rte_pci_id pci_id_fpga_5gnr_fec_vf_map[] = {
+ {
+ RTE_PCI_DEVICE(AGX100_VENDOR_ID, AGX100_VF_DEVICE_ID)
+ },
{
RTE_PCI_DEVICE(VC_5GNR_VENDOR_ID, VC_5GNR_VF_DEVICE_ID)
},
--
2.37.1
next prev parent reply other threads:[~2023-05-23 18:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-23 18:48 [PATCH v1 0/6] baseband/fpga_5gnr_fec: changes for 23.07 Hernan Vargas
2023-05-23 18:48 ` [PATCH v1 1/6] baseband/fpga_5gnr_fec: fix possible div by zero Hernan Vargas
2023-05-23 19:26 ` Maxime Coquelin
2023-05-23 18:48 ` [PATCH v1 2/6] baseband/fpga_5gnr_fec: fix seg fault unconf queue Hernan Vargas
2023-05-23 19:28 ` Maxime Coquelin
2023-05-23 18:48 ` [PATCH v1 3/6] baseband/fpga_5gnr_fec: renaming for consistency Hernan Vargas
2023-05-23 18:48 ` [PATCH v1 4/6] baseband/fpga_5gnr_fec: add Vista Creek variant Hernan Vargas
2023-05-23 18:48 ` Hernan Vargas [this message]
2023-05-23 18:48 ` [PATCH v1 6/6] baseband/fpga_5gnr_fec: cosmetic comment changes Hernan Vargas
2023-05-23 19:20 ` [PATCH v1 0/6] baseband/fpga_5gnr_fec: changes for 23.07 Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230523184818.139353-6-hernan.vargas@intel.com \
--to=hernan.vargas@intel.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=maxime.coquelin@redhat.com \
--cc=nicolas.chautru@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).