From: Zhangfei Gao <zhangfei.gao@linaro.org>
To: Akhil Goyal <gakhil@marvell.com>
Cc: dev@dpdk.org, Zhangfei Gao <zhangfei.gao@linaro.org>
Subject: [PATCH v2 resend] crypto/uadk: set queue pair in dev_configure
Date: Fri, 2 Jun 2023 11:04:35 +0800 [thread overview]
Message-ID: <20230602030436.7829-1-zhangfei.gao@linaro.org> (raw)
In-Reply-To: <20230420021313.66733-1-zhangfei.gao@linaro.org>
By default, uadk only alloc two queues for each algorithm, which
will impact performance.
Set queue pair number as required in dev_configure.
The default max queue pair number is 8, which can be modified
via para: max_nb_queue_pairs
Example:
sudo dpdk-test-crypto-perf -l 0-10 --vdev crypto_uadk,max_nb_queue_pairs=10
-- --devtype crypto_uadk --optype cipher-only --buffer-sz 8192
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
doc/guides/cryptodevs/uadk.rst | 27 +++++++++++++++++++
drivers/crypto/uadk/uadk_crypto_pmd.c | 18 +++++++++++--
drivers/crypto/uadk/uadk_crypto_pmd_private.h | 1 +
3 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
index 9af6b88a5a..053622f7bf 100644
--- a/doc/guides/cryptodevs/uadk.rst
+++ b/doc/guides/cryptodevs/uadk.rst
@@ -110,3 +110,30 @@ Test steps
sudo dpdk-test --vdev=crypto_uadk --log-level=6
RTE>>cryptodev_uadk_autotest
RTE>>quit
+
+
+Initialization
+--------------
+
+To use the PMD in an application, user must:
+
+* Call rte_vdev_init("crypto_uadk") within the application.
+
+* Use --vdev="crypto_uadk" in the EAL options, which will call rte_vdev_init() internally.
+
+The following parameters (all optional) can be provided in the previous two calls:
+
+* max_nb_queue_pairs: Specify the maximum number of queue pairs in the device (8 by default).
+ The max value of max_nb_queue_pairs can be queried from the device property available_instances.
+ Property available_instances value may differ from the devices and platforms.
+ Allocating queue pairs bigger than available_instances will fail.
+
+Example:
+
+.. code-block:: console
+
+ cat /sys/class/uacce/hisi_sec2-2/available_instances
+ 256
+
+ sudo dpdk-test-crypto-perf -l 0-10 --vdev crypto_uadk,max_nb_queue_pairs=10 \
+ -- --devtype crypto_uadk --optype cipher-only --buffer-sz 8192
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index 4f729e0f07..824383512e 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -357,8 +357,15 @@ static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = {
/* Configure device */
static int
uadk_crypto_pmd_config(struct rte_cryptodev *dev __rte_unused,
- struct rte_cryptodev_config *config __rte_unused)
+ struct rte_cryptodev_config *config)
{
+ char env[128];
+
+ /* set queue pairs num via env */
+ sprintf(env, "sync:%d@0", config->nb_queue_pairs);
+ setenv("WD_CIPHER_CTX_NUM", env, 1);
+ setenv("WD_DIGEST_CTX_NUM", env, 1);
+
return 0;
}
@@ -434,7 +441,7 @@ uadk_crypto_pmd_info_get(struct rte_cryptodev *dev,
if (dev_info != NULL) {
dev_info->driver_id = dev->driver_id;
dev_info->driver_name = dev->device->driver->name;
- dev_info->max_nb_queue_pairs = 128;
+ dev_info->max_nb_queue_pairs = priv->max_nb_qpairs;
/* No limit of number of sessions */
dev_info->sym.max_nb_sessions = 0;
dev_info->feature_flags = dev->feature_flags;
@@ -1015,6 +1022,7 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev)
struct uadk_crypto_priv *priv;
struct rte_cryptodev *dev;
struct uacce_dev *udev;
+ const char *input_args;
const char *name;
udev = wd_get_accel_dev("cipher");
@@ -1030,6 +1038,9 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev)
if (name == NULL)
return -EINVAL;
+ input_args = rte_vdev_device_args(vdev);
+ rte_cryptodev_pmd_parse_input_args(&init_params, input_args);
+
dev = rte_cryptodev_pmd_create(name, &vdev->device, &init_params);
if (dev == NULL) {
UADK_LOG(ERR, "driver %s: create failed", init_params.name);
@@ -1044,6 +1055,7 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev)
RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO;
priv = dev->data->dev_private;
priv->version = version;
+ priv->max_nb_qpairs = init_params.max_nb_queue_pairs;
rte_cryptodev_pmd_probing_finish(dev);
@@ -1078,4 +1090,6 @@ static struct cryptodev_driver uadk_crypto_drv;
RTE_PMD_REGISTER_VDEV(UADK_CRYPTO_DRIVER_NAME, uadk_crypto_pmd);
RTE_PMD_REGISTER_CRYPTO_DRIVER(uadk_crypto_drv, uadk_crypto_pmd.driver,
uadk_cryptodev_driver_id);
+RTE_PMD_REGISTER_PARAM_STRING(UADK_CRYPTO_DRIVER_NAME,
+ "max_nb_queue_pairs=<int>");
RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd_private.h b/drivers/crypto/uadk/uadk_crypto_pmd_private.h
index 9075f0f058..5a7dbff117 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd_private.h
+++ b/drivers/crypto/uadk/uadk_crypto_pmd_private.h
@@ -67,6 +67,7 @@ struct uadk_crypto_priv {
bool env_cipher_init;
bool env_auth_init;
enum uadk_crypto_version version;
+ unsigned int max_nb_qpairs;
} __rte_cache_aligned;
extern int uadk_crypto_logtype;
--
2.39.2 (Apple Git-143)
next parent reply other threads:[~2023-06-02 3:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230420021313.66733-1-zhangfei.gao@linaro.org>
2023-06-02 3:04 ` Zhangfei Gao [this message]
2023-06-09 6:57 ` Zhangfei Gao
2023-06-09 8:31 ` [EXT] " Akhil Goyal
2023-06-09 10:19 ` Zhangfei Gao
2023-06-14 19:10 ` [EXT] " Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230602030436.7829-1-zhangfei.gao@linaro.org \
--to=zhangfei.gao@linaro.org \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).